PDZ3.9BGWJ - NEXPERIA - Datasheet.Directory

PDZ-GW series

Single Zener diodes in a SOD123 package

Rev. 1 — 4 September 2017 Product data sheet

1 Product profile

1.1 General description

General-purpose Zener diodes in a SOD123 small Surface-Mounted Device (SMD)

plastic package.

1.2 Features and benefits

•Non-repetitive peak reverse power dissipation: PZSM ≤ 40 W

•Total power dissipation: Ptot ≤ 365 mW

•Tolerance series:

B2: approximately ± 2 %

•Wide working voltage range: nominal 2.4 V to 36 V (E24 range)

•Low reverse current IR range

•Small plastic package suitable for surface-mounted design

•AEC-Q101 qualified

1.3 Applications

•General regulation functions

1.4 Quick reference data

Table 1. Quick reference data

Symbol Parameter Conditions Min Typ Max Unit

VFforward voltage IF = 10 mA [1] - - 0.9 V

[2] - - 365 mWPtot total power dissipation Tamb ≤ 25 °C

[3] - - 625 mW

[1] Pulse test: tp ≤ 300 μs; δ ≤ 0.02.

[2] Device mounted on an FR4 Printed-Circuit Board (PCB), single-sided copper, tin-plated and standard footprint.

[3] Device mounted on an FR4 PCB, single-sided copper, tin-plated, mounting pad for cathode 1 cm2.

Nexperia PDZ-GW series

Single Zener diodes in a SOD123 package

Product data sheet Rev. 1 — 4 September 2017

2 / 12

2 Pinning information

Table 2. Pinning

Pin Symbol Description Simplified outline Graphic symbol

1 K cathode[1]

2 A anode

006aaa152

[1] The marking bar indicates the cathode.

3 Ordering information

Table 3. Ordering information

PackageType number

Name Description Version

PDZ2.4BGW to

PDZ36BGW[1] - plastic surface-mounted package; 2 leads SOD123

[1] The series consists of 29 types with nominal working voltages from 2.4 V to 36 V.

4 Marking

Table 4. Marking Codes

Type number Marking Code Type number Marking Code Type number Marking Code

PDZ2.4BGW B1 PDZ6.2BGW BB PDZ16BGW BM

PDZ2.7BGW B2 PDZ6.8BGW BC PDZ18BGW BN

PDZ3.0BGW B3 PDZ7.5BGW BD PDZ20BGW BP

PDZ3.3BGW B4 PDZ8.2BGW BE PDZ22BGW BQ

PDZ3.6BGW B5 PDZ9.1BGW BF PDZ24BGW BR

PDZ3.9BGW B6 PDZ10BGW BG PDZ27BGW BS

PDZ4.3BGW B7 PDZ11BGW BH PDZ30BGW BT

PDZ4.7BGW B8 PDZ12BGW BJ PDZ33BGW BU

PDZ5.1BGW B9 PDZ13BGW BK PDZ36BGW BV

PDZ5.6BGW BA PDZ15BGW BL

Nexperia PDZ-GW series

Single Zener diodes in a SOD123 package

Product data sheet Rev. 1 — 4 September 2017

3 / 12

5 Limiting values

Table 5. Limiting values

In accordance with the Absolute Maximum Rating System (IEC 60134).

Symbol Parameter Conditions Min Max Unit

IFforward current - 200 mA

IZSM non-repetitive peak reverse current - see

characteristics

table

PZSM non-repetitive peak power

dissipation

[1] - 40 W

[2] - 365 mWPtot total power dissipation Tamb ≤ 25 °C

[3] - 625 mW

Tjjunction temperature - 150

Tamb ambient temperature −55 +150 °C

Tstg storage temperature −65 +150 °C

[1] tp = 100 μs; square wave; Tj = 25 °C prior to surge.

[2] Device mounted on an FR4 PCB, single-sided copper, tin-plated and standard footprint.

[3] Device mounted on an FR4 PCB, single-sided copper, tin-plated, mounting pad for cathode 1 cm2.

6 Thermal characteristics

Table 6. Thermal characteristics

Symbol Parameter Conditions Min Typ Max Unit

[1] - - 340 K/WRth(j-a) thermal resistance from junction

to ambient

in free air

[2] - - 200 K/W

Rth(j-sp) thermal resistance from junction

to solder point

[3] - - 50 K/W

[1] Device mounted on an FR4 Printed-Circuit Board (PCB),single-sided copper, tin-plated and standard footprint.

[2] Device mounted on an FR4 PCB, single-sided copper, tin-plated, mounting pad for cathode 1 cm2.

[3] Soldering point of cathode tab.

7 Characteristics

Table 7. Characteristics

Tj = 25 °C unless otherwise specified.

Symbol Parameter Conditions Min Typ Max Unit

VFforward voltage IF = 10 mA [1] - - 0.9 V

VFforward voltage IF = 100 mA [1] - - 1.1 V

[1] Pulse test: tp ≤ 300 μs; δ ≤ 0.02.

Nexperia PDZ-GW series

Single Zener diodes in a SOD123 package

Product data sheet Rev. 1 — 4 September 2017

4 / 12

Table 8. Characteristics per type; PDZ2.4BGW to PDZ36BGW

Tj = 25 °C unless otherwise specified.

Working

voltage

VZ (V);

IZ = 5 mA

Maximum

differential

resistance

rdif (Ω)

Reverse

current

IR (μA)

Temperature

coefficient

SZ (mV/K);

IZ = 5 mA

Diode

capacitance

Cd (pF)[1]

Non-

repetitive

peak

reverse

current

IZSM (A)[2]

PDZx

BGW

Sel

Min Max IZ = 0.5

IZ = 5 mA Max VR (V) Typ Max Max

2.4 B 2.43 2.63 1000 100 50 1.0 −1.6 450 8.0

2.7 B 2.69 2.91 1000 100 20 1.0 −2.0 440 8.0

3.0 B 2.85 3.07 1000 95 10 1.0 −2.1 425 8.0

3.3 B 3.32 3.53 1000 95 5 1.0 −2.4 410 8.0

3.6 B 3.60 3.85 500 @ 1

90 5 1.0 −2.4 390 8.0

3.9 B 3.89 4.16 500 @ 1

90 3 1.0 −2.5 370 8.0

4.3 B 4.17 4.48 600 @ 1

90 3 1.0 −2.5 350 8.0

4.7 B 4.55 4.75 600 @ 1

90 2 1.0 −1.4 325 8.0

5.1 B 4.96 5.20 250 60 2 1.5 0.3 300 5.5

5.6 B 5.48 5.73 100 50 1 2.5 1.9 275 5.5

6.2 B 6.06 6.33 80 50 0.5 3.0 2.7 250 5.5

6.8 B 6.65 6.93 60 40 0.5 3.5 3.4 215 5.5

7.5 B 7.28 7.60 60 10 0.5 4.0 4.0 170 3.5

8.2 B 8.02 8.36 60 10 0.5 5.0 4.6 150 3.5

9.1 B 8.85 9.23 60 10 0.5 6.0 5.5 120 3.5

10 B 9.77 10.21 60 10 0.1 7.0 6.4 110 3.5

11 B 10.78 11.22 60 10 0.1 8.0 7.4 108 3.0

12 B 11.74 12.24 80 10 0.1 9.0 8.4 105 3.0

13 B 12.91 13.49 80 10 0.1 10.0 9.4 103 2.5

15 B 14.34 14.98 80 15 0.05 11.0 11.4 99 2.0

16 B 15.85 16.51 80 20 0.05 12.0 12.4 97 1.5

18 B 17.56 18.35 80 20 0.05 13.0 14.4 93 1.5

20 B 19.52 20.39 100 20 0.05 15.0 16.4 88 1.5

22 B 21.54 22.47 100 25 0.05 17.0 18.4 84 1.3

24 B 23.72 24.78 120 30 0.05 19.0 20.4 80 1.3

Nexperia PDZ-GW series

Single Zener diodes in a SOD123 package

Product data sheet Rev. 1 — 4 September 2017

5 / 12

Working

voltage

VZ (V);

IZ = 5 mA

Maximum

differential

resistance

rdif (Ω)

Reverse

current

IR (μA)

Temperature

coefficient

SZ (mV/K);

IZ = 5 mA

Diode

capacitance

Cd (pF)[1]

Non-

repetitive

peak

reverse

current

IZSM (A)[2]

PDZx

BGW

Sel

Min Max IZ = 0.5

IZ = 5 mA Max VR (V) Typ Max Max

27 B 26.19 27.53 150 40 0.05 21.0 23.4 73 1.0

30 B 29.19 30.69 200 40 0.05 23.0 26.6 66 1.0

33 B 32.15 33.79 250 40 0.05 25.0 29.7 60 0.9

36 B 35.07 36.87 300 60 0.05 27.0 33.0 59 0.8

[1] f = 1 MHz; VR = 0 V.

[2] tp = 100 μs; Tamb = 25 °C.

aaa-027340

103

1tp (ms)

PZSM

(W)

102

10-1

Tj = 25 °C (prior to surge)

Figure 1. Non-repetitive peak reverse power dissipation

as a function of pulse duration; maximum values

VF(V)

0.6 10.8

mbg781

100

200

300

(mA)

Tj = 25 °C

Figure 2. Forward current as a function of forward

voltage; typical values

Nexperia PDZ-GW series

Single Zener diodes in a SOD123 package

Product data sheet Rev. 1 — 4 September 2017

6 / 12

0 60

- 2

- 3

- 1

mgl273

20 40 IZ(mA)

(mV/K) 4.3

3.9

3.6

3.3

3.0

2.4

2.7

PDZ2.4BGW to PDZ4.3BGW

Tj = 25 °C to 150 °C

Figure 3. Temperature coefficient as a function of

working current; typical values

0 2016

- 5

mgl274

4 8 12 IZ(mA)

(mV/K)

4.7

9.1

8.2

7.5

6.8 6.2

5.6

5.1

PDZ4.7BGW to PDZ12BGW

Tj = 25 °C to 150 °C

Figure 4. Temperature coefficient as a function of

working current; typical values

006aab246

10- 1

10- 2

102

(mA)

10- 3

VZ(V)

0 542 31

VZ(nom) (V) = 2.4

2.7

3.0

3.3

3.6

3.9

4.3

PDZ2.4BGW to PDZ4.3BGW

Tj = 25 °C

Figure 5. Working current as a function of working

voltage; typical values

006aab247

10- 1

10- 2

102

(mA)

10- 3

VZ(V)

0 1410 12862 4

VZ(nom) (V) = 4.7

5.1

5.6

6.2

6.8

7.5

8.2

9.1

PDZ4.7BGW to PDZ12BGW

Tj = 25 °C

Figure 6. Working current as a function of working

voltage; typical values

Nexperia PDZ-GW series

Single Zener diodes in a SOD123 package

Product data sheet Rev. 1 — 4 September 2017

7 / 12

aaa-026621

10 -1

10 -2

102

(mA)

10 -3

VZ(V)

10 403020

VZ(nom) (V) = 13

PDZ13BGW to PDZ36BGW

Tj = 25 °C

Figure 7. Working current as a function of working voltage; typical values

8 Test information

8.1 Quality information

This product has been qualified in accordance with the Automotive Electronics Council

(AEC) standard Q101 - Stress test qualification for discrete semiconductors, and is

suitable for use in automotive applications.

9 Package outline

16-10-13Dimensions in mm

3.75

3.45

2.80

2.55

1.7

1.5

1.3

1.0

Figure 8. Package outline SOD123

Nexperia PDZ-GW series

Single Zener diodes in a SOD123 package

Product data sheet Rev. 1 — 4 September 2017

8 / 12

10 Soldering

SOD123

sod123_fr

occupied area

solder paste

solder resist

Cu pad

Dimensions in mm

16-05-10

16-08-31

0.81

0.91 2.36

1.11

0.81

4.18

0.91

1.11

3.27

4.58

3.1

1.421.12 1.222.1 1.62

Reflow soldering is the only recommended soldering method.

Dimensions in mm.

Figure 9. Reflow soldering footprint SOD123

Nexperia PDZ-GW series

Single Zener diodes in a SOD123 package

Product data sheet Rev. 1 — 4 September 2017

9 / 12

11 Revision history

Table 9. Revision history

Document ID Release date Data sheet status Change notice Supersedes

PDZ-GW_SER v.1 20170904 Product data sheet - -

Nexperia PDZ-GW series

Single Zener diodes in a SOD123 package

Product data sheet Rev. 1 — 4 September 2017

10 / 12

12 Legal information

12.1 Data sheet status

Document status[1][2] Product status[3] Definition

Objective [short] data sheet Development This document contains data from the objective specification for product

development.

Preliminary [short] data sheet Qualification This document contains data from the preliminary specification.

Product [short] data sheet Production This document contains the product specification.

[1] Please consult the most recently issued document before initiating or completing a design.

[2] The term 'short data sheet' is explained in section "Definitions".

[3] The product status of device(s) described in this document may have changed since this document was published and may differ in case of multiple

devices. The latest product status information is available on the Internet at URL http://www.nexperia.com.

12.2 Definitions

Draft — The document is a draft version only. The content is still under

internal review and subject to formal approval, which may result in

modifications or additions. Nexperia does not give any representations or

warranties as to the accuracy or completeness of information included herein

and shall have no liability for the consequences of use of such information.

Short data sheet — A short data sheet is an extract from a full data sheet

with the same product type number(s) and title. A short data sheet is

intended for quick reference only and should not be relied upon to contain

detailed and full information. For detailed and full information see the

relevant full data sheet, which is available on request via the local Nexperia

sales office. In case of any inconsistency or conflict with the short data sheet,

the full data sheet shall prevail.

Product specification — The information and data provided in a Product

data sheet shall define the specification of the product as agreed between

Nexperia and its customer, unless Nexperia and customer have explicitly

agreed otherwise in writing. In no event however, shall an agreement be

valid in which the Nexperia product is deemed to offer functions and qualities

beyond those described in the Product data sheet.

12.3 Disclaimers

Limited warranty and liability — Information in this document is believed

to be accurate and reliable. However, Nexperia does not give any

representations or warranties, expressed or implied, as to the accuracy

or completeness of such information and shall have no liability for the

consequences of use of such information. Nexperia takes no responsibility

for the content in this document if provided by an information source outside

of Nexperia. In no event shall Nexperia be liable for any indirect, incidental,

punitive, special or consequential damages (including - without limitation -

lost profits, lost savings, business interruption, costs related to the removal

or replacement of any products or rework charges) whether or not such

damages are based on tort (including negligence), warranty, breach of

contract or any other legal theory. Notwithstanding any damages that

customer might incur for any reason whatsoever, Nexperia's aggregate and

cumulative liability towards customer for the products described herein shall

be limited in accordance with the Terms and conditions of commercial sale of

Nexperia.

Right to make changes — Nexperia reserves the right to make changes

to information published in this document, including without limitation

specifications and product descriptions, at any time and without notice. This

document supersedes and replaces all information supplied prior to the

publication hereof.

Suitability for use — Nexperia products are not designed, authorized or

warranted to be suitable for use in life support, life-critical or safety-critical

systems or equipment, nor in applications where failure or malfunction

of an Nexperia product can reasonably be expected to result in personal

injury, death or severe property or environmental damage. Nexperia and its

suppliers accept no liability for inclusion and/or use of Nexperia products in

such equipment or applications and therefore such inclusion and/or use is at

the customer’s own risk.

Applications — Applications that are described herein for any of these

products are for illustrative purposes only. Nexperia makes no representation

or warranty that such applications will be suitable for the specified use

without further testing or modification. Customers are responsible for the

design and operation of their applications and products using Nexperia

products, and Nexperia accepts no liability for any assistance with

applications or customer product design. It is customer’s sole responsibility

to determine whether the Nexperia product is suitable and fit for the

customer’s applications and products planned, as well as for the planned

application and use of customer’s third party customer(s). Customers should

provide appropriate design and operating safeguards to minimize the risks

associated with their applications and products. Nexperia does not accept

any liability related to any default, damage, costs or problem which is based

on any weakness or default in the customer’s applications or products, or

the application or use by customer’s third party customer(s). Customer is

responsible for doing all necessary testing for the customer’s applications

and products using Nexperia products in order to avoid a default of the

applications and the products or of the application or use by customer’s third

party customer(s). Nexperia does not accept any liability in this respect.

Limiting values — Stress above one or more limiting values (as defined in

the Absolute Maximum Ratings System of IEC 60134) will cause permanent

damage to the device. Limiting values are stress ratings only and (proper)

operation of the device at these or any other conditions above those

given in the Recommended operating conditions section (if present) or the

Characteristics sections of this document is not warranted. Constant or

repeated exposure to limiting values will permanently and irreversibly affect

the quality and reliability of the device.

Terms and conditions of commercial sale — Nexperia products are

sold subject to the general terms and conditions of commercial sale, as

published at http://www.nexperia.com/profile/terms, unless otherwise agreed

in a valid written individual agreement. In case an individual agreement is

concluded only the terms and conditions of the respective agreement shall

apply. Nexperia hereby expressly objects to applying the customer’s general

terms and conditions with regard to the purchase of Nexperia products by

customer.

No offer to sell or license — Nothing in this document may be interpreted

or construed as an offer to sell products that is open for acceptance or

the grant, conveyance or implication of any license under any copyrights,

patents or other industrial or intellectual property rights.

Export control — This document as well as the item(s) described herein

may be subject to export control regulations. Export might require a prior

authorization from competent authorities.

Nexperia PDZ-GW series

Single Zener diodes in a SOD123 package

Product data sheet Rev. 1 — 4 September 2017

11 / 12

Non-automotive qualified products — Unless this data sheet expressly

states that this specific Nexperia product is automotive qualified, the

product is not suitable for automotive use. It is neither qualified nor tested in

accordance with automotive testing or application requirements. Nexperia

accepts no liability for inclusion and/or use of non-automotive qualified

products in automotive equipment or applications. In the event that customer

uses the product for design-in and use in automotive applications to

automotive specifications and standards, customer (a) shall use the product

without Nexperia's warranty of the product for such automotive applications,

use and specifications, and (b) whenever customer uses the product for

automotive applications beyond Nexperia's specifications such use shall be

solely at customer’s own risk, and (c) customer fully indemnifies Nexperia

for any liability, damages or failed product claims resulting from customer

design and use of the product for automotive applications beyond Nexperia's

standard warranty and Nexperia's product specifications.

Translations — A non-English (translated) version of a document is for

reference only. The English version shall prevail in case of any discrepancy

between the translated and English versions.

12.4 Trademarks

Notice: All referenced brands, product names, service names and

trademarks are the property of their respective owners.

Nexperia PDZ-GW series

Single Zener diodes in a SOD123 package

Please be aware that important notices concerning this document and the product(s)

described herein, have been included in section 'Legal information'.

For more information, please visit: http://www.nexperia.com

For sales office addresses, please send an email to: salesaddresses@nexperia.com

Date of release: 4 September 2017

Document identifier: PDZ-GW_SER

Contents

1 Product profile .................................................... 1

1.1 General description ............................................1

1.2 Features and benefits ........................................1

1.3 Applications ........................................................1

1.4 Quick reference data ......................................... 1

2 Pinning information ............................................ 2

3 Ordering information .......................................... 2

4 Marking .................................................................2

5 Limiting values ....................................................3

6 Thermal characteristics ......................................3

7 Characteristics .................................................... 3

8 Test information ..................................................7

8.1 Quality information .............................................7

9 Package outline ...................................................7

10 Soldering ..............................................................8

11 Revision history .................................................. 9

12 Legal information .............................................. 10