LOW-POWER SERDES, HIGH-SPEED DDR3, HIGH-CALIBER DSP LatticeECP3 Family Build Leading Edge Systems with Proven 3rd Generation FPGAs LatticeECP3 TM is the best-in-class mid-range FPGA with highperformance SERDES, full-featured DSP blocks, and support for state-of-the-art memory interfaces including DDR3. It offers 35% to 100% more silicon resources in smaller packages compared to competitors. Low-power LatticeECP3 FPGAs are used in a wide range of applications, such as wireless and wireline communication, video processing, security and surveillance, industrial networking, industrial automation, computing, storage, medical equipment, and consumer. LatticeECP3 FPGAs offer up to 150K LUTs of logic capacity and 7 Mbits of memory for system integration, cascadable highperformance DSP blocks for signal processing, high-speed memory interfaces including DDR3 at 800 Mbps, and up to 1 Gbps LVDS performance for ADC/DAC and SPI4.2 interfaces. LatticeECP3 further enables you to build high-speed systems with proven 3.2 Gbps low-power SERDES qualified for a number of protocols - PCI Express 1.1, Ethernet (GbE, SGMII & XAUI), SMPTE SDI (3G/HD/ SD), Serial RapidIO 2.1, low-latency CPRI, and JESD204A. To accelerate design of LatticeECP3 powered systems, Lattice also offers a number of generic and application-specific development kits, an expanding portfolio of free readymade reference designs, and a set of economical IP suites. FPGA Fabric Features and Capabilities Low-Power, High-Value FPGA Fabric * Low-power 65nm process with 4-input look-up table (LUT) fabric * Logic densities from 17K to 149K LUTs * Up to 7Mbits of Embedded Block RAM (EBR) and 303Kbits of distributed RAM High-Speed Embedded SERDES * Up to 16 channels with data rates from 150Mbps to 3.2Gbps * Less than 110mW power per channel at 3.2Gbps * Supports PCI Express, Ethernet (GbE, XAUI, SGMII), SMPTE, Serial RapidIO 2.1, CPRI Flexible sysIOTM Buffers * LVCMOS 33/25/18/15/12, PCI * SSTL 33/25/18/15 & HSTL15 & HSTL18 * LVDS, Bus-LVDS, RSDS, MLVDS & LVPECL * 800Mbps DDR3 * Up to 1Gbps LVDS Wide Range of Package & User I/O Options * Up to 586 user I/O pins * Proven low-cost wirebond fpBGA packages * Density migration across all densities * Pb-free / RoHS-compliant sysCLOCKTM PLL and DLL * 2 DLLs per device, 2 to 10 PLLs per device LatticeECP3 Features and Benefits Embedded SERDES 3.2Gbps operation with less than 110mW power per channel Built-in pre-emphasis and equalization Supports PCIe, Ethernet (GbE, XAUI, & SGMII), SMPTE, Serial RapidIO, CPRI and JESD204A Quad-based architecture with mix and match of different protocols within a quad Single-channel granularity for 3G/HD/SD SDI Support low latency variation CPRI links for multi-hop RRH applications Cascadable DSP with ALU Fully cascadable slice for high performance filter and wide arithmetic functions Implement rounding and truncation functions with 54-bit cascadable arithmetic logic unit Multiply, accumulate, addition and subtraction Up to 320 18x18 multipliers High-Speed I/O Pre-engineered DDR3 memory (800Mbps) Up to 1Gbps LVDS ADC/DAC, 7:1 LVDS, XGMII Advanced Configuration Options Configure with SPI boot flash or parallel burst mode flash Protect your designs with 128-bit AES Dual-boot provides backup configuration copy TransFRTM I/O support updates while system operates LATTICESEMI.COM LatticeECP3 Architecture Architecture Overview LatticeECP3 Block Diagram LatticeECP3 FPGAs utilize Lattice's third generation of cost optimized transceivers and a low-power 65-nm process FPGA architecture. Building on the successful LatticeECP2MTM FPGA family, LatticeECP3 devices deliver high-performance SERDES blocks, cascadable high-performance sysDSPTM, ultra-high logic and sysMEMTM embedded RAM, distributed memory, sysCLOCK PLLs, DDR3 memory interface, and sysIO buffers. LatticeECP3 provides a low-cost, low-power programmable solution for a wide variety of wireless and wireline applications. Programmable Function Unit (PFU) perform Logic, Arithmetic, Distributed RAM and Distributed ROM functions. Programmable Function Unit (PFU) Block Diagram Slice 3 LUT4 sysMEM Config Options FF To Routing Single Port Dual Port Pseudo-Dual Port 16384 x 1 16384 x 1 16384 x 1 FF FF Slice 0 LUT4 LUT4 8192 x 2 8192 x 2 8192 x 2 4096 x 4 4096 x 4 4096 x 4 2048 x 9 2048 x 9 2048 x 9 1024 x 18 1024 x 18 1024 x 18 512 x 36 -- 512 x 36 7 Input Registers Input Registers Multipliers Multipliers Pipeline Registers Pipeline Registers ALU ALU LatticeECP3 Decryption Engine FPGA Logic Configuration B 128-bit Key &+ == Pre-Engineered Source Synchronous Interfaces DDR3 (800 Mbps) 7:1 LVDS, ADC/DAC 4 Tri-State Register Block (2 Flip/Flops) 3 2 1 0 17K 33K 67K LUTs 92K 149K sysCLOCK PLL Block Diagram Control Signals Clock Input Clock Feedback Output Registers Phase Frequency Detector / Voltage Control Oscillator Internal Feedback Reset Phase/ Duty Cycle/ Duty Trim Divider Lock Detect Output Register ISI Block Correction (6 Flip/Flops) 4:1 Gearbox Input Register Block (15 Flip/Flops) DQS/Strobe Delay & Transition Detect & Write Clock Generation /3 Duty Trim 4:1 Gearbox FPGA Fabric Clock Outputs Output Registers Configuration A Read Data Control 7Mb Divider Divider Slice 1 (Mbits) sysDSP Block Diagram == [ Sector 1 [ UP TO 6 5 &+ SPI Configuration Memory Sector 0 LatticeECP3 EBR SRAM (Mbits) FF Carry Chain Slice 0 Dual-boot and 128-bit AES Encryption FF Divider LUT4 sysMEM Embedded Block RAM (EBR) provides 18kbit dual port RAM. Configuration Logic supports dual boot, encryption and TransFR updates. FF Slice 1 LUT4 JTAG On-Chip Oscillator Slice 2 From Routing Cascadable sysDSP Blocks implements high-performance multiplier, MAC, wide adder trees, and ALU functions efficiently. Flexible sysIO Buffers support LVCMOS, HSTL, SSTL, LVDS and more. LUT4 LUT4 SERDES SERDES SERDES SERDES sysCLOCK PLLs & DLLs for clock management. Carry Chain LUT4 Pre-Engineered Source Synchronous Support implements DDR3 at 800Mbps and generic interfaces up to 1Gbps. Embedded 3.2Gbps SERDES support PCI Express, Ethernet (XAUI, 1GbE, SGMII), CPRI, and 3G/HD/SD-SDI. High-Value, Low-Power Serial Protocol Solutions LatticeECP3 Multi-Protocol Stack Supports commonly used Ethernet protocols (1GbE, SGMII, and XAUI), Wireless protocols, such as CPRI, are supported by extension Supports PCI Express and Serial RapidIO Supported PHYs Soft IP PCI Express Serial RapidIO XAUI PCS Soft Logic XAUI State Machine PCIe PHY Soft Logic Framing LTSSM State Machine Soft Logic RX State Machine Clock Tolerance Compensation Channel Alignment Clock Tolerance Compensation Channel Alignment Clock Tolerance Compensation Channel Alignment GbE / SGMII* XAUI GbE & SGMII State Machine Auto Negotiation Clock Tolerance Compensation Embedded SERDES and Physical Coding Sub-Layers (PCS) 8b/10b 8b/10b 8b/10b 8b/10b Rx Link Synchronize Rx Link Synchronize Rx Link Synchronize Rx Link Synchronize Tx Rx Tx Rx Tx Rx LatticeECP3 SERDES Evaluation & Development Boards To accelerate your design development, Lattice offers several development boards to support LatticeECP3 designs. These boards enable you to evaluate the benefits and capabilities of LatticeECP3 devices in a lab setting. Tx Rx * CPRI Supported By Extension CPRI Low Latency Option Supports data rates for up to 3.072Gbps CPRI links Supports multi-hop RRH applications through innovative low-latency variation SERDES implemementation The LatticeECP3 Versa Evaluation Board is the industry's lowest cost FPGA board with PCI Express and two Gigabit Ethernet ports. It is useful for appreciating the quality of LatticeECP3 SERDES and developing a wide-range of networking and system design applications. Library of CPRI, JESD204A, SRIO, Ethernet and DSP cores and reference designs for single-chip RF and baseband implementations SERDES/PCS FPGA Fabric Recovered Clock rx_clk ff_rxi_clk CDR RX Des WA Bypassable Bridge 8b or 16b FIFO rx data 10b/8b Offset CPRI IP Core IP Core User Interface To SCI Word Aligner Variation Reported in Offset Registers The Lattice HDR-60 Video Camera Development Kit is an FPGA-based HDR camera capable of supporting 1080p60 over HDMI/DVI output. The design needs no external frame buffer, enabling the lowest cost FPGA HDR camera BOM. Features include Auto White Balance, industry's fastest auto-exposure, extremely low-latency and 120dB High Dynamic Range. Bypassable Bridge FIFO for Single Clock Domain Implementation Enhanced SMPTE Support Any rate, any channel, any direction for SD/HD and 3G * New x11 divider setting * Added independent Rx clocking per channel Truly independent Rx/Tx multi-rate support for SD/HD/3G! HD 3G 3G HD 148.35 MHz 148.5 MHz SD 148.5 MHz Reference Clock Reference Clock Rx Tx 3 Tx 2 HD 3G Fractional SD Tx PLL (x20) SMPTE Divider Settings DIV1: 2.97 Gbps Tx 1 Tx 0 DIV2: 1.485 Gbps DIV11: 270 Mbps Rx 3 Rec Clk 3 Rx 2 Rec Clk 2 The LatticeECP3 Serial Protocol Board provides a platform to evaluate the LatticeECP3 device's multi-protocol serial protocol functionality as well as DDR2 and DDR3 memory interfaces. Rx 1 Fabric Rec Clk 1 Rx 0 Rec Clk 0 The LatticeECP3 Video Protocol Board provides a platform to evaluate the LatticeECP3 device's multi-rate 3G/HD/SDI and 7:1 LVDS capabilities. Breakout options for other display interfaces are also available. Design Made Simple with Advanced Design Software and IP Lattice Diamond Design Software LatticeCORE IP Suites for LatticeECP3 FPGAs Lattice Diamond design software offers leading-edge design and implementation tools optimized for cost sensitive, low-power Lattice FPGA architectures. Diamond is the next generation replacement for ispLEVER(R) featuring design exploration, ease of use, improved design flow, and numerous other enhancements. The combination of new and enhanced features allows users to complete designs faster, easier, and with better results than ever before. IP Suite Intellectual Property (R) Lattice offers an expanding portfolio of IP cores (LatticeCORETM) to support the easy integration of commonly used functions. Lattice also offers IP Suites that are a collection of related IP cores for select applications/markets at very attractive prices. The following table provides a partial listing of IP Suites available for the LatticeECP3 family. In addition to these, LatticeCORE Connections Partners also offer a wide range of IP. For a complete list of IP options, please visit www.latticesemi.com/ip. Included IP Cores * DDR3/DDR2/DDR Memory Controller * FFT Compiler * FIR Filter Generator * Triple Speed 10/100/1G Ethernet MAC PCI Express * PCI Express Endpoint x1 / x4 * PCI Express Root Complex Lite x1 / x4 * PCI Target 32-bit / 64-bit * PCI Master/Target 32-bit / 64-bit * Scatter Gather DMA Gigbit Ethernet * 10Gb+ Ethernet MAC * Scatter Gather DMA * SGMII & Gigabit Ethernet MAC * Triple Speed 10/100/1G Ethernet MAC * XAUI * * * * Advanced FIR Filter Block Convolutional Encoder Block Viterbi Decoder Cascaded Integrated Comb Filter - CIC * CORDIC * Correlator * Distributed Arithmetic FIR Filter * Dynamic Block Reed Solomon Decoder / Encoder * FFT Compiler * FIR Filter Generator * Interleaver / De-interleaver * Numerically Controlled Oscillator * Turbo Decoder / Encoder * * * * * Median Filter * Tri-rate SDI PHY * Scaler Value Signal Processing Video & Display 2D FIR Filter Color Space Converter Edge Detector Gamma Corrector LatticeECP3 (Economy Plus FPGAs with SERDES, sysDSP Blocks, & Source Synchronous I/O) Parameter ECP3-17 ECP3-35 LUTs (K) 17 33 Number of EBR SRAM Blocks 38 72 EBR Block SRAM (K bits) 700 1327 Distributed RAM (K bits) 36 68 18x18 Embedded Multipliers 24 3.2Gbps SERDES Channels 4 ECP3-70 ECP3-95 ECP3-150 67 92 149 240 240 372 4420 4420 6850 145 188 303 64 128 128 320 4 12 12 16 Maximum Available I/O 222 310 490 490 586 Number of PLLs/DLLs 2+2 4+2 10+2 10+2 10+2 Power Grades1 -S, -L -S, -L -S, -L -S, -L -S, -L Speed Grades2 -6, -7, -8 -6, -7, -8, -9 -6, -7, -8, -9 -6, -7, -8, -9 -6, -7, -8, -9 4/295 Packages & SERDES / I/O Combinations 328-ball csBGA (10 x 10 mm) 2/116 256-ball ftBGA (17 x 17 mm) 4/133 4/133 484-ball fpBGA (23 x 23 mm) 4/222 4/295 4/295 4/310 8/380 8/380 8/380 12/490 12/490 16/586 672-ball fpBGA (27 x 27 mm) 1156-ball fpBGA (35 x 35 mm) 1. -S = Standard Power; -L = Low Power 2. -9 = High-Speed Device Applications Support 1-800-LATTICE (528-8423) 503-268-8001 techsupport@latticesemi.com Copyright (c) 2012 Lattice Semiconductor Corporation. Lattice Semiconductor, L (stylized) Lattice Semiconductor Corp., and Lattice (design), ispLEVER, ispLeverCORE, Lattice Diamond, LatticeCORE, LatticeECP3, LatticeECP2M, LatticeMico32, sysCLOCK, sysCONFIG, sysDSP, sysIO, sysMEM, and TransFR are either registered trademarks or trademarks of Lattice Semiconductor Corporation in the United States and/or other countries. Other product names used in this publication are for identification purposes only and may be trademarks of their respective companies. May 2012 Order #: I0198H LATTICESEMI.COM