MCC 21 Thyristor Modules VRRM VDSM VDRM V V 900 1300 1500 1700 800 1200 1400 1600 3 Type 5 2 TO-240 AA 1 3 6 7 4 5 MCC 21-08io8 B MCC 21-12io8 B MCC 21-14io8 B MCC 21-16io8 B Conditions ITRMS ITAVM TVJ = TVJM TC = 85C; 180 sine ITSM TVJ = 45C; VR = 0 (di/dt)cr 1 2 Symbol I2dt 6 Maximum Ratings 33 21 A A t = 10 ms (50 Hz), sine t = 8.3 ms (60 Hz), sine 320 350 A A TVJ = TVJM VR = 0 t = 10 ms (50 Hz), sine t = 8.3 ms (60 Hz), sine 280 310 A A TVJ = 45C VR = 0 t = 10 ms (50 Hz), sine t = 8.3 ms (60 Hz), sine 500 520 A2s A2s TVJ = TVJM VR = 0 t = 10 ms (50 Hz), sine t = 8.3 ms (60 Hz), sine 390 400 A2s A2s TVJ = TVJM repetitive, IT = 45 A f = 50Hz, tP = 200s VD = 2/3 VDRM IG = 0.45 A non repetitive, IT = ITAVM diG/dt = 0.45 A/s 150 A/s 500 A/s TVJ = TVJM; VDR = /3 VDRM RGK = ; method 1 (linear voltage rise) PGM TVJ = TVJM IT = ITAVM 1000 tP = 30 s tP = 300 s V/s 10 5 W W PGAV 0.5 W VRGM 10 V TVJ TVJM Tstg -40...+125 125 -40...+125 C C C 3000 3600 V~ V~ VISOL 50/60 Hz, RMS IISOL 1 mA Md Mounting torque (M5) Terminal connection torque (M5) Weight Typical including screws * International standard package, JEDEC TO-240 AA * Direct copper bonded Al2O3 -ceramic base plate * Planar passivated chips * Isolation voltage 3600 V~ * UL registered, E 72873 * Gate-cathode twin pins for version 1B Applications * DC motor control * Softstart AC motor controller * Light, heat and temperature control Advantages 2 (dv/dt)cr Features t = 1 min t=1s * Space and weight savings * Simple mounting with two screws * Improved temperature and power cycling * Reduced protection circuits 2.5-4.0/22-35 Nm/lb.in. 2.5-4.0/22-35 Nm/lb.in. 90 Data according to DIN/IEC 747 and refer to a single thyristor unless otherwise stated. (c) 2000 IXYS All rights reserved g 649 VRSM 1-2 http://store.iiic.cc/ MCC 21 Symbol Conditions Characteristic Values IRRM, IDRM TVJ = TVJM; VR = VRRM; VD = VDRM VT IT VT0 rT For power-loss calculations only (TVJ = 125C) VGT VD = 6 V; IGT 5 1.6 V 0.85 15 V mW TVJ = 25C TVJ = -40C 1.0 1.2 V V VD = 6 V; TVJ = 25C TVJ = -40C 65 80 mA mA VGD IGD TVJ = TVJM; VD = 2/3 VDRM 0.2 5 V mA IL TVJ = 25C; tP = 10 s; VD = 6 V IG = 0.3 A; diG/dt = 0.3 A/s 150 mA IH TVJ = 25C; VD = 6 V; RGK = 100 mA tgd TVJ = 25C; VD = 1/2 VDRM IG = 0.3 A; diG/dt = 0.3 A/s 2 s tq TVJ = TVJM; IT = 15 A, tP = 300 s; -di/dt = 10 A/s VR = 100 V; dv/dt = 20 V/s; VD = 2/3 VDRM 150 s IRM TVJ = TVJM; IT = 30 A, -di/dt = 0.3 A/s 4 A RthJC per thyristor; DC current per module per thyristor; DC current per module RthJK dS dA a = 45 A; TVJ = 25C mA typ. other values see Fig. 8/9 Creepage distance on surface Strike distance through air Maximum allowable acceleration 1.1 0.55 1.3 0.65 K/W K/W K/W K/W 12.7 9.6 50 mm mm m/s2 Fig. 1 Gate trigger characteristics Optional accessories for module-type MCC 23 version 1 B Keyed gate/cathode twin plugs with wire length = 350 mm, gate = yellow, cathode = red Type ZY 200L (L = Left for pin pair 4/5) UL 758, style 1385, Type ZY 200R (R = right for pin pair 6/7) CSA class 5851, guide 460-1-1 Fig. 2 Gate trigger delay time Dimensions in mm (1 mm = 0.0394") (c) 2000 IXYS All rights reserved 2-2 http://store.iiic.cc/