TECHNICAL DATA SHEET ADAPTOR RPC-2.92 PLUG - RPC-2.40 JACK 02S109-K00S3 All dimensions are in mm; tolerances according to ISO 2768 m-H Interface RPC-2.92 mechanically compatible with RPC-2.40 mechanically compatible with RPC-3.50 and SMA RPC-1.85 Documents N/A Material and plating RF_35/12.04/3.0 Connector parts Center contact Outer contact Coupling nut Dielectric Gasket Material Beryllium copper Stainless steel Stainless steel PS Silicone Rosenberger Hochfrequenztechnik GmbH & Co. KG P.O.Box 1260 D-84526 Tittmoning Germany www.rosenberger.de Plating Gold, min. 1.27 m, over chemical nickel Passivated Passivated Tel.: +49 8684 18-0 Fax: +49 8684 18-499 email: info@rosenberger.de Page 1/2 TECHNICAL DATA SHEET ADAPTOR RPC-2.92 PLUG - RPC-2.40 JACK 02S109-K00S3 Electrical data Impedance Frequency Return loss 50 DC to 40 GHz 28 dB, DC to 12 GHz 25 dB, 12 GHz to 26.5 GHz 20 dB, 26.5 GHz to 40 GHz Insertion loss Insulation resistance Center contact resistance RPC-2.92 Outer contact resistance RPC-2.92 Center contact resistance RPC-2.40 Outer contact resistance RPC-2.40 Test voltage Working voltage RF-leakage 0.05 x f(GHz) dB 5 G 3.0 m 2.0 m 4.0 m 2.5 m 500 V rms 150 V rms 100 dB up to 1 GHz Mechanical data Mating cycles Center contact captivation Coupling test torque RPC-2.92 Recommended torque RPC-2.92 Coupling test torque RPC-2.40 Recommended torque RPC-2.40 500 22 N 1.70 Nm 0.80 Nm to 1.10 Nm 1.65 Nm 0.80 Nm to 1.10 Nm Environmental data Temperature range Thermal shock Corrosion Vibration Shock Moisture resistance 2002/95/EC (RoHS) -40C to +85C MIL-STD-202, Method MIL-STD-202, Method MIL-STD-202, Method MIL-STD-202, Method MIL-STD-202, Method compliant 107, 101, 204, 213, 106 Condition Condition Condition Condition B B D I Tooling N/A Suitable cables N/A Packing Standard Weight 1 pce in box 5.9 g/pce RF_35/12.04/3.0 While the information has been carefully compiled to the best of our knowledge, nothing is intended as representation or warranty on our part and no statement herein shall be construed as recommendation to infringe existing patents. In the effort to improve our products, we reserve the right to make changes judged to be necessary. Draft Date Approved Date Rev. Engineering change number Name Date Herbert Babinger 16/07/04 Moder 28.01.10 d00 10-0035 M. Knoll 26/01/10 Rosenberger Hochfrequenztechnik GmbH & Co. KG P.O.Box 1260 D-84526 Tittmoning Germany www.rosenberger.de Tel.: +49 8684 18-0 Fax: +49 8684 18-499 email: info@rosenberger.de Page 2/2