PLA192 Single Pole, Normally Open OptoMOS(R) Relay INTEGRATED CIRCUITS DIVISION Parameters Blocking Voltage Load Current On-Resistance (max) LED Current to Operate Ratings 600 Units VP 150 22 5 mArms / mADC Description IXYS Integrated Circuits Division's PLA192 is a single-pole, normally open (1-Form-A) solid state relay that provides 5000Vrms of input to output isolation. mA Features * PLA192E is 100% Tested for Partial Discharge: DIN EN 60747-5-5 * 5000Vrms Input/Output Isolation * Low Drive Power Requirements (TTL/CMOS Compatible) * No Moving Parts * High Reliability * Arc-Free With No Snubbing Circuits * No EMI/RFI Generation * Small 6-Pin Package * Machine Insertable, Wave Solderable In addition to all the features and benefits of the PLA192, the PLA192E meets the partial discharge demands of DIN EN 60747-5-5 (previously VDE 0884). All versions of the PLA192 can be used to replace mechanical relays, while offering the superior reliability associated with semiconductor devices. Optically coupled outputs that use the patented OptoMOS architecture are controlled by a highly efficient GaAIAs infrared LED. Because they have no moving parts, they offer bounce-free switching in more compact surface mount or thru-hole packages. Approvals Applications * Instrumentation * Multiplexers * Data Acquisition * Electronic Switching * I/O Subsystems * Meters (Watt-Hour, Water, Gas) * Medical Equipment: Patient/Equipment Isolation * Aerospace * Industrial Controls Pin Configuration AC/DC Configuration 1 + Control - Control Do Not Use 6 2 5 3 4 * UL Recognized Component: File E76270 * CSA Certified Component: Certificate 1175739 * EN/IEC 60950-1 Certified Component: TUV Certificate B 12 11 82667 002 * DIN EN 60747-5-5 Certified ("E" Suffix Only) VDE Certificate 40036603 Ordering Information Part # PLA192E PLA192ES PLA192ESTR Description 6-Pin DIP (50/Tube) 6-Pin Surface Mount (50/Tube) 6-Pin Surface Mount (1000/Reel) PLA192 6-Pin DIP (50/Tube) PLA192S 6-Pin Surface Mount (50/Tube) PLA192STR 6-Pin Surface Mount (1000/Reel) Load Switching Characteristics of Normally Open Devices Do Not Use Load Form-A DC Only Configuration + Control - Control Do Not Use 1 6 2 5 3 4 + Load IF - Load 90% 10% ILOAD ton Pb DS-PLA192-R07 toff e3 www.ixysic.com 1 INTEGRATED CIRCUITS DIVISION PLA192 Absolute Maximum Ratings @ 25C (Unless Otherwise Noted) Parameter Blocking Voltage Reverse Input Voltage Input Control Current Peak (10ms) Input Power Dissipation 1 Total Package Dissipation 2 Isolation Voltage, Input to Output (60 Seconds) ESD Rating, Human Body Model Operational Temperature Storage Temperature 1 Derate linearly 1.33 mW / C 2 Derate linearly 6.67 mW / C Rating 600 5 50 1 150 800 Units VP V mA A mW mW 5000 Vrms 4 -40 to +85 -40 to +125 kV C C Absolute Maximum Ratings are stress ratings. Stresses in excess of these ratings can cause permanent damage to the device. Functional operation of the device at conditions beyond those indicated in the operational sections of this data sheet is not implied. Electrical Characteristics @ 25C (Unless Otherwise Noted) Parameters Output Characteristics Load Current Continuous, AC/DC Configuration Continuous, DC-Only Configuration Peak On-Resistance AC/DC Configuration DC-Only Configuration Off-State Leakage Current Switching Speeds Turn-On Turn-Off Output Capacitance Input Characteristics Input Control Current to Activate Input Control Current to Deactivate Input Voltage Drop Reverse Input Current Common Characteristics Input to Output Capacitance Conditions Min Typ Max Units - - 150 220 400 mArms / mADC mADC mAP 13.3 4.15 - 22 8 1 ILEAK - VL=50V, f=1MHz ton toff COUT - 10 5 5 - IL=100mA IF=5mA VR=5V IF IF VF IR 0.1 0.9 - 0.22 0.21 1.2 - 5 1.4 10 mA mA V A - CI/O - 3 - pF Min 7071 1000 7.6 7.6 Max 1875 5000 - Units VP VP VP Vrms mm mm t=10ms Symbol IL ILPK IL=150mA IL=220mA VL=600VP IF=5mA, VL=10V RON A ms pF PLA192E Safety and Insulation Ratings Parameters Pollution Degree 2 according to DIN VDE 0109 Highest Allowable Over-Voltage Maximum Working Insulation Voltage Partial Discharge Test Voltage Isolation Test Voltage Creepage Distance Clearance Distance 2 Conditions Transient Voltage Recurring Voltage DIN EN 60747-5-5 Method B - www.ixysic.com Symbol VIOTM VIORM VPR VISO - R07 INTEGRATED CIRCUITS DIVISION PLA192 PERFORMANCE DATA (@ 25C Unless Otherwise Noted)* 25 20 15 10 35 30 30 25 20 15 10 25 20 15 10 5 5 5 0 0 0 1.25 1.6 1.26 1.27 1.28 1.29 LED Forward Voltage Drop (V) Typical IF for Switch Operation (N=50, IL=100mA) 30 1.7 1.8 1.9 2.0 Turn-On Time (ms) 2.1 0.23 Typical On-Resistance Distribution (N=50, IF=5mA, IL=150mA) 40 30 35 Device Count (N) 25 Device Count (N) 35 Device Count (N) Device Count (N) Device Count (N) 30 Typical Turn-Off Time (N=50, IF=5mA, IL=100mADC ) 20 15 10 5 25 20 15 10 0 0.20 0.21 0.22 0.23 0.24 LED Current (mA) 0.25 0.38 DC-Only On-Resistance Distribution (N=50, IF=5mA, IL=220mA) 20 15 10 5 5 0 0.26 0.29 0.32 0.35 Turn-Off Time (ms) 25 30 Device Count (N) 35 Typical Turn-On Time (N=50, IF=5mA, IL=100mADC ) Typical LED Forward Voltage Drop (N=50, IF=5mA) 0 13.1 0.26 13.2 13.3 13.4 13.5 On-Resistance (:) 13.6 4.05 4.10 4.15 4.20 4.25 On-Resistance (:) 4.30 Typical Blocking Voltage Distribution (N=50) 30 Device Count (N) 25 20 15 10 5 0 700 1.3 1.2 1.1 360 3500 Turn-Off Time (Ps) 1.4 3000 2500 2000 1500 1000 0 -40 -20 0 20 40 60 Temperature (C) 80 100 359 358 357 356 500 1.0 Typical Turn-Off Time vs. LED Forward Current (IL=100mA) 361 4000 Turn-On Time (Ps) LED Forward Voltage Drop (V) 4500 IF=50mA IF=20mA IF=10mA IF=5mA 1.5 750 Typical Turn-On Time vs. LED Forward Current (IL=100mA) Typical LED Forward Voltage Drop vs. Temperature 1.6 710 720 730 740 Blocking Voltage (VP) 355 0 10 20 30 LED Current (mA) 40 50 0 10 20 30 40 Forward Current (mA) 50 *The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department. R07 www.ixysic.com 3 INTEGRATED CIRCUITS DIVISION PLA192 0.30 4500 4000 0.28 0.26 0.24 0.22 0.20 3000 2500 1500 1000 0.16 500 0 20 40 60 Temperature (C) 80 IF=10mA IF=5mA IF=2mA 450 400 350 300 250 200 -20 0 20 40 60 Temperature (C) 80 100 -40 Typical DC-Only On-Resistance vs. Temperature (IF=5mA, IL=220mA) 7 -20 0 20 40 60 Temperature (C) 80 100 80 100 Maximum Load Current vs. Temperature (IF=5mA) 250 DC-Only Configuration On-Resistance (:) 12 10 -40 0.15 -20 0 20 40 60 Temperature (C) 80 5 4 3 2 1 -40 100 Typical Load Current vs. Load Voltage AC/DC Configuration (IF=5mA) 0.25 0.10 0 20 40 60 Temperature (C) 80 Current (A) 0.00 -0.05 0.10 0.05 -0.15 0.00 -3 -2 -1 0 1 Voltage (V) 2 3 0.03 0.02 0.01 0 0.6 0.8 Voltage (V) 1.0 -20 0 20 40 60 Temperature (C) 80 100 750 740 730 720 710 -40 -20 0 20 40 60 80 100 10s 100s Temperature (C) 1.2 160 Energy Rating Curve (IF=5mA) 1.0 140 120 100 80 60 40 0.8 0.6 0.4 0.2 20 0 -40 20 40 60 Temperature (C) 760 1.2 Load Current (A) Output Capacitance (pF) 0.04 0.4 0 770 Output Capacitance vs. Load Voltage (IF=0mA, f=1MHz) 180 0.05 0.2 -20 Typical Blocking Voltage vs. Temperature 700 0.0 Typical Leakage vs. Temperature Measured across Pins 4&6 (VL=600V) 0.06 100 -40 Typical Load Current vs. Load Voltage DC-Only Configuration (IF=5mA) 0.15 -0.10 AC/DC Configuration 150 100 0.20 0.05 200 50 -20 Blocking Voltage (VP) 14 Load Current (mA) 6 16 8 Current (A) IF=10mA -40 100 Typical AC/DC On-Resistance vs. Temperature (IF=5mA, IL=150mA) 18 On-Resistance (:) -20 IF=5mA 2000 Typical Turn-Off Time vs. Temperature (IL=100mA) 500 IF=2mA 3500 0.18 -40 Leakage (PA) Typical Turn-On Time vs. Temperature (IL=100mA) Turn-Off Time (Ps) Typical IF for Switch Operation vs. Temperature (IL=100mA) Turn-On Time (Ps) LED Current to Operate (mA) PERFORMANCE DATA (@ 25C Unless Otherwise Noted)* 0.1 1 10 100 Load Voltage (V) 1000 0 10Ps 100Ps 1ms 10ms 100ms Time 1s *The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department. 4 www.ixysic.com R07 INTEGRATED CIRCUITS DIVISION PLA192 Manufacturing Information Moisture Sensitivity All plastic encapsulated semiconductor packages are susceptible to moisture ingression. IXYS Integrated Circuits Division classified all of its plastic encapsulated devices for moisture sensitivity according to the latest version of the joint industry standard, IPC/JEDEC J-STD-020, in force at the time of product evaluation. We test all of our products to the maximum conditions set forth in the standard, and guarantee proper operation of our devices when handled according to the limitations and information in that standard as well as to any limitations set forth in the information or standards referenced below. Failure to adhere to the warnings or limitations as established by the listed specifications could result in reduced product performance, reduction of operable life, and/or reduction of overall reliability. This product carries a Moisture Sensitivity Level (MSL) rating as shown below, and should be handled according to the requirements of the latest version of the joint industry standard IPC/JEDEC J-STD-033. Device Moisture Sensitivity Level (MSL) Rating All Versions MSL 1 ESD Sensitivity This product is ESD Sensitive, and should be handled according to the industry standard JESD-625. Reflow Profile This product has a maximum body temperature and time rating as shown below. All other guidelines of J-STD-020 must be observed. Device Maximum Temperature x Time All Versions 250C for 30 seconds Board Wash IXYS Integrated Circuits Division recommends the use of no-clean flux formulations. However, board washing to remove flux residue is acceptable. IXYS Integrated Circuits Division employs the use of silicone coating as an optical waveguide in the standard PLA192 (without the "E" suffix); the use of a short drying bake could be necessary if a wash is used after solder reflow processes. The E-suffix product, being of double-molded construction, does not have the same necessity for a drying bake. Chlorine- or Fluorine-based solvents or fluxes should not be used. Cleaning methods that employ ultrasonic energy should not be used. Pb R07 e3 www.ixysic.com 5 INTEGRATED CIRCUITS DIVISION PLA192 MECHANICAL DIMENSIONS PLA192 & PLA192E 8.382 0.381 (0.330 0.015) PCB Hole Pattern 7.239 TYP (0.285 TYP) 2.54 0.127 (0.100 0.005) 6 - 0.800 DIA. (6 - 0.031 DIA.) 9.144 0.508 (0.360 0.020) 6.350 0.127 (0.250 0.005) 2.540 0.127 (0.100 0.005) 7.620 0.127 (0.300 0.005) Pin 1 7.620 0.254 (0.300 0.010) 1.651 0.254 (0.065 0.010) 3.302 0.051 (0.130 0.002) 0.254 0.0127 (0.010 0.0005) 6.350 0.127 (0.250 0.005) 5.080 0.127 (0.200 0.005) 4.064 TYP (0.160 TYP) Dimensions mm (inches) 0.457 0.076 (0.018 0.003) PLA192S & PLA192ES 8.382 0.381 (0.330 0.015) 9.524 0.508 (0.375 0.020) Pin 1 0.635 0.127 (0.025 0.005) PCB Land Pattern 2.54 0.127 (0.100 0.005) 2.54 (0.10) 6.350 0.127 (0.250 0.005) 0.457 0.076 (0.018 0.003) 1.651 0.254 (0.065 0.010) 7.620 0.254 (0.300 0.010) 0.254 0.0127 (0.010 0.0005) 8.90 (0.3503) 1.65 (0.0649) 0.65 (0.0255) 3.302 0.051 (0.130 0.002) 4.445 0.254 (0.175 0.010) Dimensions mm (inches) 1.651 0.254 (0.065 0.010) 6 www.ixysic.com R07 INTEGRATED CIRCUITS DIVISION PLA192 PLA192STR & PLA192ESTR Tape & Reel 330.2 Dia (13.00 Dia) Top Cover Tape Thickness 0.102 Max (0.004 Max) W=16.00 (0.63) B0 = 10.10 (0.398) K0 = 4.90 (0.19) K1 = 3.80 (0.15) P = 12.00 (0.472) User Direction of Feed Embossed Carrier Embossment A0 = 10.10 (0.398) Dimensions mm (inches) NOTES: 1. All dimensions carry tolerances of EIA Standard 481-2 2. The tape complies with all "Notes" for constant dimensions listed on page 5 of EIA-481-2 For additional information please visit our website at: www.ixysic.com IXYS Integrated Circuits Division makes no representations or warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications and product descriptions at any time without notice. Neither circuit patent licenses nor indemnity are expressed or implied. Except as set forth in IXYS Integrated Circuits Division's Standard Terms and Conditions of Sale, IXYS Integrated Circuits Division assumes no liability whatsoever, and disclaims any express or implied warranty, relating to its products including, but not limited to, the implied warranty of merchantability, fitness for a particular purpose, or infringement of any intellectual property right. The products described in this document are not designed, intended, authorized or warranted for use as components in systems intended for surgical implant into the body, or in other applications intended to support or sustain life, or where malfunction of IXYS Integrated Circuits Division's product may result in direct physical harm, injury, or death to a person or severe property or environmental damage. IXYS Integrated Circuits Division reserves the right to discontinue or make changes to its products at any time without notice. 7 Specification: DS-PLA192-R07 (c)Copyright 2013, IXYS Integrated Circuits Division All rights reserved. Printed in USA. 2/28/2013 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: IXYS: PLA192E PLA192ES PLA192ESTR PLA192 PLA192STR PLA192S