SLCS006L - OCTOBER 1979 - REVISED JUNE 2004 D D D D D D D description/ordering information These devices consist of four independent voltage comparators that are designed to operate from a single power supply over a wide range of voltages. Operation from dual supplies also is possible as long as the difference between the two supplies is 2 V to 36 V, and VCC is at least 1.5 V more positive than the input common-mode voltage. Current drain is independent of the supply voltage. The outputs can be connected to other open-collector outputs to achieve wired-AND relationships. 1OUT 2OUT VCC 2IN- 2IN+ 1IN- 1IN+ 1 14 2 13 3 12 4 11 5 10 6 9 7 8 OUT3 OUT4 GND 4IN+ 4IN- 3IN+ 3IN- LM139, LM139A . . . FK PACKAGE (TOP VIEW) 2OUT 1OUT NC 3OUT 4OUT D - Max Rating . . . 2 V to 36 V - Tested to 30 V . . . Non-V Devices - Tested to 32 V . . . V-Suffix Devices Low Supply-Current Drain Independent of Supply Voltage . . . 0.8 mA Typ Low Input Bias Current . . . 25 nA Typ Low Input Offset Current . . . 3 nA Typ (LM139) Low Input Offset Voltage . . . 2 mV Typ Common-Mode Input Voltage Range Includes Ground Differential Input Voltage Range Equal to Maximum-Rated Supply Voltage . . . 36 V Low Output Saturation Voltage Output Compatible With TTL, MOS, and CMOS LM139, LM139A . . . D, J, OR W PACKAGE LM239 . . . D, N, OR PW PACKAGE LM239A . . . D PACKAGE LM339, LM339A . . . D, DB, N, NS, OR PW PACKAGE LM2901 . . . D, N, NS, OR PW PACKAGE (TOP VIEW) VCC NC 2IN- NC 2IN+ 4 3 2 1 20 19 18 5 17 6 16 7 15 8 14 9 10 11 12 13 GND NC 4IN+ NC 4IN- 1IN- 1IN+ NC 3IN- 3IN+ D Single Supply or Dual Supplies D Wide Range of Supply Voltage: NC - No internal connection The LM139 and LM139A are characterized for operation over the full military temperature range of -55C to 125C. The LM239 and LM239A are characterized for operation from -25C to 125C. The LM339 and LM339A are characterized for operation from 0C to 70C. The LM2901 is characterized for operation from -40C to 125C. Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. Copyright 2004, Texas Instruments Incorporated ! "#$ ! %#&'" ($) (#"! " !%$""! %$ *$ $! $+! !#$! !(( ,-) (#" %"$!!. ($! $"$!!'- "'#($ $!. '' %$$!) %(#"! "%' //011 '' %$$! $ $!$( #'$!! *$,!$ $() '' *$ %(#"! %(#" %"$!!. ($! $"$!!'- "'#($ $!. '' %$$!) POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 1 SLCS006L - OCTOBER 1979 - REVISED JUNE 2004 description/ordering information (continued) ORDERING INFORMATION TA VIOmax AT 25C PACKAGE MAX VCC PDIP (N) 30 V LM339N Tube of 50 LM339D Reel of 2500 LM339DR SOP (NS) Reel of 2000 LM339NSR LM339 SSOP (DB) Reel of 2000 LM339DBR LM339 Tube of 90 LM339PW Reel of 2000 LM339PWR Tube of 25 LM339AN Tube of 50 LM339AD Reel of 2500 LM339ADR SOP (NS) Reel of 2000 LM339ANSR LM339A SSOP (DB) Reel of 2000 LM339ADBR L339A Tube of 90 LM339APW Reel of 2000 LM339APWR Tube of 25 LM239N Tube of 50 LM239D Reel of 2500 LM239DR Tube of 90 LM239PW Reel of 2000 LM239PWR Tube of 50 LM239AD Reel of 2500 LM239ADR Tube of 25 LM2901N Tube of 50 LM2901D Reel of 2500 LM2901DR Reel of 2000 LM2901NSR Tube of 90 LM2901PW Reel of 2000 LM2901PWR SOIC (D) Reel of 2500 LM2901VQDR L2901V TSSOP (PW) Reel of 2000 LM2901VQPWR L2901V SOIC (D) Reel of 2500 LM2901AVQDR L2901AV TSSOP (PW) Reel of 2000 LM2901AVQPWR TSSOP (PW) 0C to 70C PDIP (N) SOIC (D) 2 mV 30 V TSSOP (PW) PDIP (N) 5 mV 30 V -25C -25 C to 85 85C C SOIC (D) TSSOP (PW) 2 mV 30 V SOIC (D) PDIP (N) SOIC (D) 7 mV 30 V -40C to 125C SOP (NS) TSSOP (PW) 7 mV 32 V 2 mV 32 V TOP-SIDE MARKING Tube of 25 SOIC (D) 5 mV ORDERABLE PART NUMBER LM339N LM339 L339 LM339AN LM339A L339A LM239N LM239 L239 LM239A LM2901N LM2901 LM2901 L2901 L2901AV Package drawings, standard packing quantities, thermal data, symbolization, and PCB design guidelines are available at www.ti.com/sc/package. 2 POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 SLCS006L - OCTOBER 1979 - REVISED JUNE 2004 description/ordering information (continued) ORDERING INFORMATION TA VIOmax AT 25C 5 mV 30 V 2 mV 30 V TOP-SIDE MARKING CFP (W) Tube of 25 LM139W LM139W CDIP (J) Tube of 25 LM139J LM139J LCCC (FK) Tube of 55 LM139FK LM139FK Tube of 50 LM139D Reel of 2500 LM139DR CFP (W) Tube of 25 LM139AW LM139AW CDIP (J) Tube of 25 LM139AJ LM139AJ LCCC (FK) Tube of 55 LM139AFK LM139AFK Tube of 50 LM139AD Reel of 2500 LM139ADR SOIC (D) -55C to 125C ORDERABLE PART NUMBER PACKAGE MAX VCC SOIC (D) LM139D LM139AD Package drawings, standard packing quantities, thermal data, symbolization, and PCB design guidelines are available at www.ti.com/sc/package. symbol (each comparator) IN+ OUT IN- schematic (each comparator) VCC 80-A Current Regulator 10 A 60 A 10 A 80 A IN+ OUT IN- GND All current values shown are nominal. POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 3 SLCS006L - OCTOBER 1979 - REVISED JUNE 2004 absolute maximum ratings over operating free-air temperature range (unless otherwise noted) Supply voltage, VCC (see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 V Differential input voltage, VID (see Note 2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 V Input voltage range, VI (either input) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -0.3 V to 36 V Output voltage, VO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 V Output current, IO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 mA Duration of output short circuit to ground (see Note 3) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Unlimited Package thermal impedance, JA (see Notes 4 and 5): D package . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86C/W DB package . . . . . . . . . . . . . . . . . . . . . . . . . . . 96C/W N package . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80C/W NS package . . . . . . . . . . . . . . . . . . . . . . . . . . . 76C/W PW package . . . . . . . . . . . . . . . . . . . . . . . . . 113C/W Package thermal impedance, JC (see Notes 6 and 7): FK package . . . . . . . . . . . . . . . . . . . . . . . . . 5.61C/W J package . . . . . . . . . . . . . . . . . . . . . . . . . 15.05C/W W package . . . . . . . . . . . . . . . . . . . . . . . . 14.65C/W Operating virtual junction temperature, TJ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 150C Case temperature for 60 seconds: FK package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 260C Lead temperature 1,6 mm (1/16 inch) from case for 60 seconds: J package . . . . . . . . . . . . . . . . . . . . . 300C Storage temperature range, Tstg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -65C to 150C Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. NOTES: 1. All voltage values, except differential voltages, are with respect to network ground. 2. Differential voltages are at IN+ with respect to IN-. 3. Short circuits from outputs to VCC can cause excessive heating and eventual destruction. 4. Maximum power dissipation is a function of TJ(max), JA, and TA. The maximum allowable power dissipation at any allowable ambient temperature is PD = (TJ(max) - TA)/JA. Operating at the absolute maximum TJ of 150C can affect reliability. 5. The package thermal impedance is calculated in accordance with JESD 51-7. 6. Maximum power dissipation is a function of TJ(max), JC, and TC. The maximum allowable power dissipation at any allowable case temperature is PD = (TJ(max) - TC)/JC. Operating at the absolute maximum TJ of 150C can affect reliability. 7. The package thermal impedance is calculated in accordance with MIL-STD-883. 4 POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 SLCS006L - OCTOBER 1979 - REVISED JUNE 2004 electrical characteristics at specified free-air temperature, VCC = 5 V (unless otherwise noted) PARAMETER TEST CONDITIONS TA VCC = 5 V to 30 V, VIC = VICR(min), VO = 1.4 V Full range Input offset current VO = 1.4 V Full range IIB Input bias current VO = 1.4 V VICR Common-mode input-voltage range VIO Input offset voltage IIO LM139 MIN TYP MAX 2 5 25C 3 25C Full range IOH High-level output current VID = 1 V VOH = 5 V VOH = 30 V MAX 1 2 UNIT -25 IOL Low-level output current VID = -1 V, VOL = 1.5 V 25C ICC Supply current (four comparators) VO = 2.5 V, No load 25C 50 150 200 V/mV 0.1 nA 150 700 6 16 0.8 2 16 0.8 A 400 700 6 nA V 1 400 nA -100 -300 1 25C Full range -25 0 to VCC-2 Full range IOL = 4 mA -100 0 to VCC-2 0.1 25 100 0 to VCC-1.5 25C VID = -1 V, 3 0 to VCC-1.5 200 Low-level output voltage 25 -300 25C VOL 4 100 Full range VCC = 7.5 V, VO = -5 V to 5 V TYP mV 25C Large-signal differential-voltage amplification MIN 9 25C AVD LM139A mV mA 2 mA All characteristics are measured with zero common-mode input voltage, unless otherwise specified. Full range (MIN to MAX) for LM139 and LM139A is -55C to 125C. All characteristics are measured with zero common-mode input voltage, unless otherwise specified. switching characteristics, VCC = 5 V, TA = 25C PARAMETER LM139 LM139A TEST CONDITIONS MIN Response time RL connected to 5 V through 5.1 k, CL = 15 pF, See Note 8 TYP 100-mV input step with 5-mV overdrive 1.3 TTL-level input step 0.3 UNIT MAX s CL includes probe and jig capacitance. NOTE 8: The response time specified is the interval between the input step function and the instant when the output crosses 1.4 V. POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 5 SLCS006L - OCTOBER 1979 - REVISED JUNE 2004 electrical characteristics at specified free-air temperature, VCC = 5 V (unless otherwise noted) PARAMETER TEST CONDITIONS LM239 LM339 TA MIN VCC = 5 V to 30 V, VIC = VICR(min), VO = 1.4 V 25C VIO Input offset voltage IIO Input offset current VO = 1.4 V Full range IIB Input bias current VO = 1.4 V Full range VICR Common-mode input-voltage range IOH MAX 2 5 MIN UNIT TYP MAX 1 3 mV 9 5 25C Full range High-level output current VCC = 15 V, VO = 1.4 V to 11.4 V, RL 15 k to VCC VOH = 5 V VID = 1 V VOH = 30 V Full range VOL Low-level output voltage VID = -1 V, IOL = 4 mA Full range IOL Low-level output current VID = -1 V, VOL = 1.5 V 25C ICC Supply current (four comparators) VO = 2.5 V, No load 25C 25C 4 50 5 150 25C Large-signal differential-voltage amplification TYP Full range 25C AVD LM239A LM339A -25 150 -250 -25 -400 0 to VCC-1.5 0 to VCC-2 0 to VCC-2 25C 200 0.1 50 50 150 200 V/mV 0.1 400 150 700 6 16 0.8 50 nA 1 A 400 700 6 2 nA V 1 25C nA -250 -400 0 to VCC-1.5 50 50 16 mV mA 0.8 2 mA All characteristics are measured with zero common-mode input voltage, unless otherwise specified. Full range (MIN to MAX) for LM239 and LM239A is -25C to 85C, for LM339 and LM339A is 0C to 70C. All characteristics are measured with zero common-mode input voltage, unless otherwise specified. switching characteristics, VCC = 5 V, TA = 25C PARAMETER TEST CONDITIONS LM239, LM239A, LM339, LM339A MIN Response time RL connected to 5 V through 5.1 k, CL = 15 pF, See Note 8 TYP 100-mV input step with 5-mV overdrive 1.3 TTL-level input step 0.3 CL includes probe and jig capacitance. NOTE 8: The response time specified is the interval between the input step function and the instant when the output crosses 1.4 V. 6 POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 UNIT MAX s SLCS006L - OCTOBER 1979 - REVISED JUNE 2004 electrical characteristics at specified free-air temperature, VCC = 5 V (unless otherwise noted) TEST CONDITIONS PARAMETER TA LM2901 MIN TYP 25C VIO Input offset voltage VIC = VICR(min), VO = 1.4 V, VCC = 5 V to MAX Non-A devices 2 Full range VO = 1.4 V Full range IIB Input bias current VO = 1.4 V Full range VICR Common-mode input-voltage range 25C Full range Large-signal differential-voltage amplification VCC = 15 V, VO = 1.4 V to 11.4 V, RL 15 k to VCC IOH High-level output current VID = 1 V 25C VOH = 5 V VOH = VCC MAX IOL ICC Low-level output voltage Low-level output current Supply current (four comparators) VID = -1 V, IOL = 4 mA VID = -1 V, VO = 2.5 V, No load V-suffix devices All devices VOL = 1.5 V VCC = 5 V VCC = MAX 50 -25 0 to VCC-1.5 25 100 nA V/mV 0.1 50 nA 1 A 150 500 150 400 Full range 25C nA V 0 to VCC-2 25C Full range 25C mV -250 -500 Non-V devices VOL 5 200 25C AVD 2 4 25C Input offset current 7 1 Full range IIO UNIT 15 25C A-suffix devices MAX mV 700 6 25C 16 mA 0.8 2 1 2.5 mA All characteristics are measured with zero common-mode input voltage, unless otherwise specified. Full range (MIN to MAX) for LM2901 is -40C to 125C. All characteristics are measured with zero common-mode input voltage, unless otherwise specified. VCC MAX = 30 V for non-V devices, and 32 V for V-suffix devices. switching characteristics, VCC = 5 V, TA = 25C LM2901 PARAMETER Response time TEST CONDITIONS RL connected to 5 V through 5.1 k, CL = 15 pF, See Note 8 MIN TYP 100-mV input step with 5-mV overdrive 1.3 TTL-level input step 0.3 MAX UNIT s CL includes probe and jig capacitance. NOTE 8: The response time specified is the interval between the input step function and the instant when the output crosses 1.4 V. POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 7 PACKAGE OPTION ADDENDUM www.ti.com 18-Feb-2005 PACKAGING INFORMATION Orderable Device Status (1) 5962-7700801VCA ACTIVE CDIP J 14 1 None 5962-87739012A ACTIVE LCCC FK 20 1 None 5962-8773901CA ACTIVE CDIP J 14 1 None A42 SNPB Level-NC-NC-NC 5962-8773901DA ACTIVE CFP W 14 1 None A42 SNPB Level-NC-NC-NC 77008012A ACTIVE LCCC FK 20 1 None 7700801CA ACTIVE CDIP J 14 1 None A42 SNPB Level-NC-NC-NC 7700801DA ACTIVE CFP W 14 1 None A42 SNPB Level-NC-NC-NC JM38510/11201BCA ACTIVE CDIP J 14 1 None A42 SNPB Level-NC-NC-NC Package Type Package Drawing Pins Package Eco Plan (2) Qty Lead/Ball Finish A42 SNPB MSL Peak Temp (3) Level-NC-NC-NC POST-PLATE Level-NC-NC-NC POST-PLATE Level-NC-NC-NC LM139AD ACTIVE SOIC D 14 50 None CU NIPDAU Level-3-245C-168 HR LM139ADR ACTIVE SOIC D 14 2500 Pb-Free (RoHS) CU NIPDAU Level-2-250C-1 YEAR/ Level-1-235C-UNLIM LM139AFKB ACTIVE LCCC FK 20 1 None LM139AJ ACTIVE CDIP J 14 1 None A42 SNPB Level-NC-NC-NC LM139AJB ACTIVE CDIP J 14 1 None A42 SNPB Level-NC-NC-NC LM139AN OBSOLETE PDIP N 14 None Call TI POST-PLATE Level-NC-NC-NC Call TI LM139AW ACTIVE CFP W 14 1 None A42 SNPB Level-NC-NC-NC LM139AWB ACTIVE CFP W 14 1 None A42 SNPB Level-NC-NC-NC LM139D ACTIVE SOIC D 14 50 None CU NIPDAU Level-1-220C-UNLIM CU NIPDAU Level-1-220C-UNLIM LM139DR ACTIVE SOIC D 14 2500 None LM139FKB ACTIVE LCCC FK 20 1 None LM139J ACTIVE CDIP J 14 1 None A42 SNPB Level-NC-NC-NC LM139JB ACTIVE CDIP J 14 1 None A42 SNPB Level-NC-NC-NC LM139N OBSOLETE PDIP N 14 None Call TI LM139W ACTIVE CFP W 14 None A42 SNPB Level-NC-NC-NC LM139WB ACTIVE CFP W 14 1 None A42 SNPB Level-NC-NC-NC LM239AD ACTIVE SOIC D 14 50 Pb-Free (RoHS) CU NIPDAU Level-2-260C-1 YEAR/ Level-1-235C-UNLIM LM239ADR ACTIVE SOIC D 14 2500 Pb-Free (RoHS) CU NIPDAU Level-2-260C-1 YEAR/ Level-1-235C-UNLIM LM239AN OBSOLETE PDIP N 14 None Call TI LM239D ACTIVE SOIC D 14 50 Pb-Free (RoHS) CU NIPDAU Level-2-260C-1 YEAR/ Level-1-235C-UNLIM LM239DR ACTIVE SOIC D 14 2500 Pb-Free (RoHS) CU NIPDAU Level-2-260C-1 YEAR/ Level-1-235C-UNLIM LM239N ACTIVE PDIP N 14 25 Pb-Free (RoHS) CU NIPDAU Level-NC-NC-NC LM239PW ACTIVE TSSOP PW 14 90 Pb-Free (RoHS) CU NIPDAU Level-1-250C-UNLIM LM239PWR ACTIVE TSSOP PW 14 2000 Pb-Free (RoHS) CU NIPDAU Level-1-250C-UNLIM LM2901AVQDR ACTIVE SOIC D 14 2500 Pb-Free (RoHS) CU NIPDAU Level-2-250C-1 YEAR/ Level-1-235C-UNLIM LM2901AVQPWR ACTIVE TSSOP PW 14 2000 None CU NIPDAU Level-1-250C-UNLIM LM2901D ACTIVE SOIC D 14 50 Pb-Free (RoHS) CU NIPDAU Level-2-260C-1 YEAR/ Level-1-235C-UNLIM 1 Addendum-Page 1 POST-PLATE Level-NC-NC-NC Call TI Call TI PACKAGE OPTION ADDENDUM www.ti.com (1) 18-Feb-2005 Orderable Device Status (1) Package Type Package Drawing Pins Package Eco Plan (2) Qty Lead/Ball Finish MSL Peak Temp (3) LM2901DR ACTIVE SOIC D 14 2500 Pb-Free (RoHS) CU NIPDAU Level-2-260C-1 YEAR/ Level-1-235C-UNLIM LM2901N ACTIVE PDIP N 14 25 Pb-Free (RoHS) CU NIPDAU Level-NC-NC-NC LM2901NSR ACTIVE SO NS 14 2000 Pb-Free (RoHS) CU NIPDAU Level-2-260C-1 YEAR/ Level-1-235C-UNLIM LM2901PW ACTIVE TSSOP PW 14 90 Pb-Free (RoHS) CU NIPDAU Level-1-250C-UNLIM LM2901PWLE OBSOLETE TSSOP PW 14 None Call TI LM2901PWR ACTIVE TSSOP PW 14 Pb-Free (RoHS) CU NIPDAU LM2901QD OBSOLETE SOIC D 14 None Call TI Call TI LM2901QN OBSOLETE PDIP N 14 None Call TI Call TI LM2901VQDR ACTIVE SOIC D 14 2500 Pb-Free (RoHS) CU NIPDAU Level-2-250C-1 YEAR/ Level-1-235C-UNLIM LM2901VQPWR ACTIVE TSSOP PW 14 2000 None CU NIPDAU Level-1-250C-UNLIM LM339AD ACTIVE SOIC D 14 50 Pb-Free (RoHS) CU NIPDAU Level-2-260C-1 YEAR/ Level-1-235C-UNLIM LM339ADBR ACTIVE SSOP DB 14 2000 Pb-Free (RoHS) CU NIPDAU Level-2-260C-1 YEAR/ Level-1-235C-UNLIM LM339ADR ACTIVE SOIC D 14 2500 Pb-Free (RoHS) CU NIPDAU Level-2-260C-1 YEAR/ Level-1-235C-UNLIM LM339AN ACTIVE PDIP N 14 25 Pb-Free (RoHS) CU NIPDAU Level-NC-NC-NC LM339ANSR ACTIVE SO NS 14 2000 Pb-Free (RoHS) CU NIPDAU Level-2-260C-1 YEAR/ Level-1-235C-UNLIM LM339APW ACTIVE TSSOP PW 14 90 Pb-Free (RoHS) CU NIPDAU Level-1-250C-UNLIM LM339APWR ACTIVE TSSOP PW 14 2000 Pb-Free (RoHS) CU NIPDAU Level-1-250C-UNLIM LM339D ACTIVE SOIC D 14 50 Pb-Free (RoHS) CU NIPDAU Level-2-260C-1 YEAR/ Level-1-235C-UNLIM LM339DBLE OBSOLETE SSOP DB 14 None Call TI LM339DBR ACTIVE SSOP DB 14 2000 Pb-Free (RoHS) CU NIPDAU Level-2-260C-1 YEAR/ Level-1-235C-UNLIM LM339DR ACTIVE SOIC D 14 2500 Pb-Free (RoHS) CU NIPDAU Level-2-260C-1 YEAR/ Level-1-235C-UNLIM LM339N ACTIVE PDIP N 14 25 Pb-Free (RoHS) CU NIPDAU Level-NC-NC-NC LM339NSLE OBSOLETE SO NS 14 None Call TI LM339NSR ACTIVE SO NS 14 2000 Pb-Free (RoHS) CU NIPDAU Level-2-260C-1 YEAR/ Level-1-235C-UNLIM LM339PW ACTIVE TSSOP PW 14 90 Pb-Free (RoHS) CU NIPDAU Level-1-250C-UNLIM LM339PWLE OBSOLETE TSSOP PW 14 None Call TI LM339PWR ACTIVE TSSOP PW 14 2000 Pb-Free (RoHS) CU NIPDAU LM339Y OBSOLETE None Call TI 2000 0 The marketing status values are defined as follows: Addendum-Page 2 Call TI Level-1-250C-UNLIM Call TI Call TI Call TI Level-1-250C-UNLIM Call TI PACKAGE OPTION ADDENDUM www.ti.com 18-Feb-2005 ACTIVE: Product device recommended for new designs. LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect. NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design. PREVIEW: Device has been announced but is not in production. Samples may or may not be available. OBSOLETE: TI has discontinued the production of the device. (2) Eco Plan - May not be currently available - please check http://www.ti.com/productcontent for the latest availability information and additional product content details. None: Not yet available Lead (Pb-Free). Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes. Green (RoHS & no Sb/Br): TI defines "Green" to mean "Pb-Free" and in addition, uses package materials that do not contain halogens, including bromine (Br) or antimony (Sb) above 0.1% of total product weight. (3) MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDECindustry standard classifications, and peak solder temperature. Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis. Addendum-Page 3 MECHANICAL DATA MCFP002A - JANUARY 1995 - REVISED FEBRUARY 2002 W (R-GDFP-F14) CERAMIC DUAL FLATPACK Base and Seating Plane 0.260 (6,60) 0.235 (5,97) 0.045 (1,14) 0.026 (0,66) 0.008 (0,20) 0.004 (0,10) 0.080 (2,03) 0.045 (1,14) 0.280 (7,11) MAX 1 0.019 (0,48) 0.015 (0,38) 14 0.050 (1,27) 0.390 (9,91) 0.335 (8,51) 0.005 (0,13) MIN 4 Places 7 8 0.360 (9,14) 0.250 (6,35) 0.360 (9,14) 0.250 (6,35) 4040180-2 / C 02/02 NOTES: A. B. C. D. E. All linear dimensions are in inches (millimeters). This drawing is subject to change without notice. This package can be hermetically sealed with a ceramic lid using glass frit. Index point is provided on cap for terminal identification only. Falls within MIL STD 1835 GDFP1-F14 and JEDEC MO-092AB POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 MECHANICAL DATA MLCC006B - OCTOBER 1996 FK (S-CQCC-N**) LEADLESS CERAMIC CHIP CARRIER 28 TERMINAL SHOWN 18 17 16 15 14 13 NO. OF TERMINALS ** 12 19 11 20 10 A B MIN MAX MIN MAX 20 0.342 (8,69) 0.358 (9,09) 0.307 (7,80) 0.358 (9,09) 28 0.442 (11,23) 0.458 (11,63) 0.406 (10,31) 0.458 (11,63) 21 9 22 8 44 0.640 (16,26) 0.660 (16,76) 0.495 (12,58) 0.560 (14,22) 23 7 52 0.739 (18,78) 0.761 (19,32) 0.495 (12,58) 0.560 (14,22) 24 6 68 0.938 (23,83) 0.962 (24,43) 0.850 (21,6) 0.858 (21,8) 84 1.141 (28,99) 1.165 (29,59) 1.047 (26,6) 1.063 (27,0) B SQ A SQ 25 5 26 27 28 1 2 3 4 0.080 (2,03) 0.064 (1,63) 0.020 (0,51) 0.010 (0,25) 0.020 (0,51) 0.010 (0,25) 0.055 (1,40) 0.045 (1,14) 0.045 (1,14) 0.035 (0,89) 0.045 (1,14) 0.035 (0,89) 0.028 (0,71) 0.022 (0,54) 0.050 (1,27) 4040140 / D 10/96 NOTES: A. B. C. D. E. All linear dimensions are in inches (millimeters). This drawing is subject to change without notice. This package can be hermetically sealed with a metal lid. The terminals are gold plated. Falls within JEDEC MS-004 POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 MECHANICAL DATA MSSO002E - JANUARY 1995 - REVISED DECEMBER 2001 DB (R-PDSO-G**) PLASTIC SMALL-OUTLINE 28 PINS SHOWN 0,38 0,22 0,65 28 0,15 M 15 0,25 0,09 8,20 7,40 5,60 5,00 Gage Plane 1 14 0,25 A 0-8 0,95 0,55 Seating Plane 2,00 MAX 0,10 0,05 MIN PINS ** 14 16 20 24 28 30 38 A MAX 6,50 6,50 7,50 8,50 10,50 10,50 12,90 A MIN 5,90 5,90 6,90 7,90 9,90 9,90 12,30 DIM 4040065 /E 12/01 NOTES: A. B. C. D. All linear dimensions are in millimeters. This drawing is subject to change without notice. Body dimensions do not include mold flash or protrusion not to exceed 0,15. Falls within JEDEC MO-150 POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 MECHANICAL DATA MTSS001C - JANUARY 1995 - REVISED FEBRUARY 1999 PW (R-PDSO-G**) PLASTIC SMALL-OUTLINE PACKAGE 14 PINS SHOWN 0,30 0,19 0,65 14 0,10 M 8 0,15 NOM 4,50 4,30 6,60 6,20 Gage Plane 0,25 1 7 0- 8 A 0,75 0,50 Seating Plane 0,15 0,05 1,20 MAX PINS ** 0,10 8 14 16 20 24 28 A MAX 3,10 5,10 5,10 6,60 7,90 9,80 A MIN 2,90 4,90 4,90 6,40 7,70 9,60 DIM 4040064/F 01/97 NOTES: A. B. C. D. All linear dimensions are in millimeters. This drawing is subject to change without notice. Body dimensions do not include mold flash or protrusion not to exceed 0,15. Falls within JEDEC MO-153 POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications, enhancements, improvements, and other changes to its products and services at any time and to discontinue any product or service without notice. Customers should obtain the latest relevant information before placing orders and should verify that such information is current and complete. All products are sold subject to TI's terms and conditions of sale supplied at the time of order acknowledgment. TI warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with TI's standard warranty. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where mandated by government requirements, testing of all parameters of each product is not necessarily performed. TI assumes no liability for applications assistance or customer product design. Customers are responsible for their products and applications using TI components. To minimize the risks associated with customer products and applications, customers should provide adequate design and operating safeguards. TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right, copyright, mask work right, or other TI intellectual property right relating to any combination, machine, or process in which TI products or services are used. Information published by TI regarding third-party products or services does not constitute a license from TI to use such products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from TI under the patents or other intellectual property of TI. Reproduction of information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. Reproduction of this information with alteration is an unfair and deceptive business practice. TI is not responsible or liable for such altered documentation. Resale of TI products or services with statements different from or beyond the parameters stated by TI for that product or service voids all express and any implied warranties for the associated TI product or service and is an unfair and deceptive business practice. TI is not responsible or liable for any such statements. Following are URLs where you can obtain information on other Texas Instruments products and application solutions: Products Applications Amplifiers amplifier.ti.com Audio www.ti.com/audio Data Converters dataconverter.ti.com Automotive www.ti.com/automotive DSP dsp.ti.com Broadband www.ti.com/broadband Interface interface.ti.com Digital Control www.ti.com/digitalcontrol Logic logic.ti.com Military www.ti.com/military Power Mgmt power.ti.com Optical Networking www.ti.com/opticalnetwork Microcontrollers microcontroller.ti.com Security www.ti.com/security Telephony www.ti.com/telephony Video & Imaging www.ti.com/video Wireless www.ti.com/wireless Mailing Address: Texas Instruments Post Office Box 655303 Dallas, Texas 75265 Copyright 2005, Texas Instruments Incorporated