SN74LVC4245A OCTAL BUS TRANSCEIVER AND 3.3-V TO 5-V SHIFTER WITH 3-STATE OUTPUTS www.ti.com SCAS375H - MARCH 1994 - REVISED MARCH 2005 FEATURES * * * * * DB, DW, OR PW PACKAGE (TOP VIEW) Bidirectional Voltage Translator 5.5 V on A Port and 2.7 V to 3.6 V on B Port Control Inputs VIH/VIL Levels Are Referenced to VCCA Voltage Latch-Up Performance Exceeds 250 mA Per JESD 17 ESD Protection Exceeds JESD 22 - 2000-V Human-Body Model (A114-A) - 200-V Machine Model (A115-A) - 1000-V Charged-Device Model (C101) (5 V) VCCA DIR A1 A2 A3 A4 A5 A6 A7 A8 GND GND DESCRIPTION/ORDERING INFORMATION 1 24 2 23 3 22 4 21 5 20 6 19 7 18 8 17 9 16 10 15 11 14 12 13 VCCB (3.3 V) VCCB (3.3 V) OE B1 B2 B3 B4 B5 B6 B7 B8 GND This 8-bit (octal) noninverting bus transceiver contains two separate supply rails; B port has VCCB, which is set at 3.3 V, and A port has VCCA, which is set at 5 V. This allows for translation from a 3.3-V to a 5-V environment, and vice versa.
The SN74LVC4245A is designed for asynchronous communication between data buses. The device transmits data from the A bus to the B bus or from the B bus to the A bus, depending on the logic level at the direction-control (DIR) input. The output-enable (OE) input can be used to disable the device so the buses are effectively isolated. The control circuitry (DIR, OE) is powered by VCCA. The SN74LVC4245A pinout allows the designer to switch to a normal all-3.3-V or all-5-V 20-pin '245 device without board re-layout. The designer uses the data paths for pins 2-11 and 14-23 of the SN74LVC4245A to align with the conventional '245 pinout. ORDERING INFORMATION PACKAGE (1) TA SOIC - DW -40C to 85C SSOP - DB TSSOP - PW (1) ORDERABLE PART NUMBER Tube of 25 SN74LVC4245ADW Reel of 2000 SN74LVC4245ADWR Reel of 2000 SN74LVC4245ADBR Tube of 60 SN74LVC4245APW Reel of 2000 SN74LVC4245APWR Reel of 250 SN74LVC4245APWT TOP-SIDE MARKING LVC4245A LJ245A LJ245A Package drawings, standard packing quantities, thermal data, symbolization, and PCB design guidelines are available at www.ti.com/sc/package. FUNCTION TABLE INPUTS OE DIR OPERATION L L B data to A bus L H A data to B bus H X Isolation Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of the Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters. Copyright (c) 1994-2005, Texas Instruments Incorporated SN74LVC4245A OCTAL BUS TRANSCEIVER AND 3.3-V TO 5-V SHIFTER WITH 3-STATE OUTPUTS www.ti.com SCAS375H - MARCH 1994 - REVISED MARCH 2005 LOGIC DIAGRAM (POSITIVE LOGIC) 2 DIR 22 OE A1 3 21 B1 To Seven Other Channels Absolute Maximum Ratings (1) over operating free-air temperature range for VCCA = 4.5 V to 5.5 V (unless otherwise noted) MIN VCCA Supply voltage range MAX -0.5 6.5 A port (2) -0.5 VCCA + 0.5 Control inputs -0.5 6 -0.5 VCCA + 0.5 UNIT V VI Input voltage range VO Output voltage range A port (2) IIK Input clamp current VI < 0 -50 mA IOK Output clamp current VO < 0 -50 mA IO Continuous output current 50 mA 100 mA Continuous current through each VCCA or GND JA Package thermal impedance (3) Tstg Storage temperature range DB package 63 DW package 46 PW package (1) (2) (3) 2 V V C/W 88 -65 150 C Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. This value is limited to 6 V maximum. The package thermal impedance is calculated in accordance with JESD 51-7. SN74LVC4245A OCTAL BUS TRANSCEIVER AND 3.3-V TO 5-V SHIFTER WITH 3-STATE OUTPUTS www.ti.com Absolute Maximum Ratings SCAS375H - MARCH 1994 - REVISED MARCH 2005 (1) over operating free-air temperature range for VCCB = 2.7 V to 3.6 V (unless otherwise noted) VCCB Supply voltage range VI Input voltage range MIN MAX -0.5 4.6 UNIT V B port (2) -0.5 VCCB + 0.5 V port (2) -0.5 VCCB + 0.5 VO Output voltage range B IIK Input clamp current VI < 0 -50 mA IOK Output clamp current VO < 0 -50 mA IO Continuous output current 50 mA 100 mA Continuous current through VCCB or GND JA Package thermal impedance (3) Tstg (1) (2) (3) DB package 63 DW package 46 PW package 88 Storage temperature range -65 150 V C/W C Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. This value is limited to 4.6 V maximum. The package thermal impedance is calculated in accordance with JESD 51-7. Recommended Operating Conditions (1) for VCCA = 4.5 V to 5.5 V VCCA Supply voltage VIH High-level input voltage VIL Low-level input voltage VIA Input voltage VOA Output voltage IOH High-level output current IOL Low-level output current TA Operating free-air temperature (1) MIN MAX 4.5 5.5 2 UNIT V V 0.8 V 0 VCCA V 0 VCCA V -24 mA 24 mA 85 C -40 All unused inputs of the device must be held at the associated VCC or GND to ensure proper device operation. Refer to the TI application report, Implications of Slow or Floating CMOS Inputs, literature number SCBA004. Recommended Operating Conditions (1) for VCCB = 2.7 V to 3.6 V VCCB Supply voltage VIH High-level input voltage VCCB = 2.7 V to 3.6 V VIL Low-level input voltage VCCB = 2.7 V to 3.6 V VIB Input voltage VOB Output voltage IOH High-level output current IOL Low-level output current TA Operating free-air temperature (1) MIN MAX 2.7 3.6 2 UNIT V V 0.8 V 0 VCCB V 0 VCCB V VCCB = 2.7 V -12 VCCB = 3 V -24 VCCB = 2.7 V 12 VCCB = 3 V 24 -40 85 mA mA C All unused inputs of the device must be held at the associated VCC or GND to ensure proper device operation. Refer to the TI application report, Implications of Slow or Floating CMOS Inputs, literature number SCBA004. 3 SN74LVC4245A OCTAL BUS TRANSCEIVER AND 3.3-V TO 5-V SHIFTER WITH 3-STATE OUTPUTS www.ti.com SCAS375H - MARCH 1994 - REVISED MARCH 2005 Electrical Characteristics (1) over recommended operating free-air temperature range for VCCA = 4.5 V to 5.5 V (unless otherwise noted) PARAMETER TEST CONDITIONS VCCA IOH = -100 A VOH IOH = -24 mA MIN TYP (2) 4.5 V 4.3 5.5 V 5.3 4.5 V 3.7 5.5 V 4.7 VOL IOL = 24 mA UNIT V 4.5 V IOL = 100 A MAX 0.2 5.5 V 0.2 4.5 V 0.55 5.5 V 0.55 V II Control inputs VI = VCCA or GND 5.5 V 1 A IOZ (3) A port VO = VCCA or GND 5.5 V 5 A ICCA VI = VCCA or GND, IO = 0 5.5 V 80 A ICCA (4) One input at 3.4 V, Other inputs at VCCA or GND 5.5 V 1.5 mA Ci Control inputs VI = VCCA or GND Open 5 pF Cio A port VO = VCCA or GND 5V 11 pF (1) (2) (3) (4) VCCB = 2.7 V to 3.6 V All typical values are measured at VCC = 5 V, TA = 25C. For I/O ports, the parameter IOZ includes the input leakage current. This is the increase in supply current for each input that is at one of the specified TTL voltage levels, rather than 0 V or the associated VCC. Electrical Characteristics (1) over recommended operating free-air temperature range for VCCB = 2.7 V to 3.6 V (unless otherwise noted) PARAMETER TEST CONDITIONS IOH = -100 A VOH IOZ (3) B port 2.2 2.4 IOH = -24 mA 3V 2 IOL = 100 A 2.7 V to 3.6 V IOL = 12 mA 2.7 V 0.4 IOL = 24 mA 3V 0.55 VO = VCCB or GND VI = VCCB or GND, IO = 0 ICCB (4) One input at VCCB - 0.6 V, Other inputs at VCCB or GND (1) (2) (3) (4) 4 B port MAX 3V ICCB Cio MIN TYP (2) 2.7 V IOH = -12 mA VOL VCCB VO = VCCB or GND UNIT 2.7 V to 3.6 V VCC - 0.2 V 0.2 V 3.6 V 5 3.6 V 50 A 2.7 V to 3.6 V 0.5 mA 3.3 V 11 A pF VCCA = 5 V 0.5 V All typical values are measured at VCC = 3.3 V, TA = 25C. For I/O ports, the parameter IOZ includes the input leakage current. This is the increase in supply current for each input that is at one of the specified TTL voltage levels, rather than 0 V or the associated VCC. SN74LVC4245A OCTAL BUS TRANSCEIVER AND 3.3-V TO 5-V SHIFTER WITH 3-STATE OUTPUTS www.ti.com SCAS375H - MARCH 1994 - REVISED MARCH 2005 Switching Characteristics over recommended operating free-air temperature range, CL = 50 pF (unless otherwise noted) (see Figure 1 and Figure 2) PARAMETER tPHL tPLH tPHL tPLH tPZL tPZH tPZL tPZH tPLZ tPHZ tPLZ tPHZ FROM (INPUT) TO (OUTPUT) A B B A OE A OE B OE A OE B VCCA = 5 V 0.5 V, VCCB = 2.7 V to 3.6 V UNIT MIN MAX 1 6.3 1 6.7 1 6.1 1 5 1 9 1 8.1 1 8.8 1 9.8 1 7 1 5.8 1 7.7 1 7.8 ns ns ns ns ns ns Operating Characteristics VCCA = 4.5 V to 5.5 V, VCCB = 2.7 V to 3.6 V, TA = 25C PARAMETER Cpd Power dissipation capacitance per transceiver TEST CONDITIONS Outputs enabled Outputs disabled CL = 0, f = 10 MHz TYP 39.5 5 UNIT pF Power-Up Considerations (1) TI level-translation devices offer an opportunity for successful mixed-voltage signal design. A proper power-up sequence always should be followed to avoid excessive supply current, bus contention, oscillations, or other anomalies caused by improperly biased device pins. Take these precautions to guard against such power-up problems: 1. Connect ground before any supply voltage is applied. 2. Power up the control side of the device (VCCA for all four of these devices). 3. Tie OE to VCCA with a pullup resistor so that it ramps with VCCA. 4. Depending on the direction of the data path, DIR can be high or low. If DIR high is needed (A data to B bus), ramp it with VCCA. Otherwise, keep DIR low. (1) Refer to the TI application report, Texas Instruments Voltage-Level-Translation Devices, literature number SCEA021. 5 SN74LVC4245A OCTAL BUS TRANSCEIVER AND 3.3-V TO 5-V SHIFTER WITH 3-STATE OUTPUTS www.ti.com SCAS375H - MARCH 1994 - REVISED MARCH 2005 PARAMETER MEASUREMENT INFORMATION A PORT 2 x VCC 500 From Output Under Test S1 Open GND CL = 50 pF (see Note A) 500 TEST S1 tPLH/tPHL tPLZ/tPZL tPHZ/tPZH Open 2 x VCC GND 1.5 V 1.5 V LOAD CIRCUIT tw VCC Input 1.5 V 1.5 V 0V VOLTAGE WAVEFORMS PULSE DURATION 1.5 V 1.5 V 0V tPLH tPHL VOH Output 50% VCC 0V tPZL VCC Input 3V Output Control 50% VCC VOL VOLTAGE WAVEFORMS PROPAGATION DELAY TIMES NONINVERTING OUTPUTS Output Waveform 1 S1 at 2 x VCC (see Note B) Output Waveform 2 S1 at GND (see Note B) tPLZ VCC 50% VCC tPZH 50% VCC VOL + 0.3 V VOL tPHZ VOH - 0.3 V VOH 0 V VOLTAGE WAVEFORMS ENABLE AND DISABLE TIMES LOW- AND HIGH-LEVEL ENABLING NOTES: A. CL includes probe and jig capacitance. B. Waveform 1 is for an output with internal conditions such that the output is low, except when disabled by the output control. Waveform 2 is for an output with internal conditions such that the output is high, except when disabled by the output control. C. All input pulses are supplied by generators having the following characteristics: PRR 10 MHz, ZO = 50 , tr 2.5 ns, tf 2.5 ns. D. The outputs are measured one at a time, with one transition per measurement. E. All parameters and waveforms are not applicable to all devices. Figure 1. Load Circuit and Voltage Waveforms 6 SN74LVC4245A OCTAL BUS TRANSCEIVER AND 3.3-V TO 5-V SHIFTER WITH 3-STATE OUTPUTS www.ti.com SCAS375H - MARCH 1994 - REVISED MARCH 2005 PARAMETER MEASUREMENT INFORMATION B PORT 7V 500 From Output Under Test S1 Open GND CL = 50 pF (see Note A) 500 TEST S1 tPLH/tPHL tPLZ/tPZL tPHZ/tPZH Open 7V GND LOAD CIRCUIT tw 3V Input 1.5 V 1.5 V 0V VOLTAGE WAVEFORMS PULSE DURATION 1.5 V 1.5 V 0V tPLH tPHL VOH Output 1.5 V 1.5 V 1.5 V VOL VOLTAGE WAVEFORMS PROPAGATION DELAY TIMES NONINVERTING OUTPUTS 1.5 V 0V tPZL 3V Input 3V Output Control Output Waveform 1 S1 at 7 V (see Note B) tPLZ 3.5 V 1.5 V tPZH Output Waveform 2 S1 at GND (see Note B) VOL + 0.3 V VOL tPHZ 1.5 V VOH - 0.3 V VOH 0 V VOLTAGE WAVEFORMS ENABLE AND DISABLE TIMES LOW- AND HIGH-LEVEL ENABLING NOTES: A. CL includes probe and jig capacitance. B. Waveform 1 is for an output with internal conditions such that the output is low, except when disabled by the output control. Waveform 2 is for an output with internal conditions such that the output is high, except when disabled by the output control. C. All input pulses are supplied by generators having the following characteristics: PRR 10 MHz, ZO = 50 , tr 2.5 ns, tf 2.5 ns. D. The outputs are measured one at a time, with one transition per measurement. E. All parameters and waveforms are not applicable to all devices. Figure 2. Load Circuit and Voltage Waveforms 7 PACKAGE OPTION ADDENDUM www.ti.com 14-Feb-2012 PACKAGING INFORMATION Orderable Device Status (1) Package Type Package Drawing Pins Package Qty Eco Plan (2) Lead/ Ball Finish MSL Peak Temp SN74LVC4245ADBR ACTIVE SSOP DB 24 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74LVC4245ADBRE4 ACTIVE SSOP DB 24 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74LVC4245ADBRG4 ACTIVE SSOP DB 24 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74LVC4245ADW ACTIVE SOIC DW 24 25 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74LVC4245ADWE4 ACTIVE SOIC DW 24 25 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74LVC4245ADWG4 ACTIVE SOIC DW 24 25 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74LVC4245ADWR ACTIVE SOIC DW 24 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74LVC4245ADWRE4 ACTIVE SOIC DW 24 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74LVC4245ADWRG4 ACTIVE SOIC DW 24 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74LVC4245APW ACTIVE TSSOP PW 24 60 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74LVC4245APWE4 ACTIVE TSSOP PW 24 60 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74LVC4245APWG4 ACTIVE TSSOP PW 24 60 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74LVC4245APWR ACTIVE TSSOP PW 24 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74LVC4245APWRE4 ACTIVE TSSOP PW 24 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74LVC4245APWRG4 ACTIVE TSSOP PW 24 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74LVC4245APWT ACTIVE TSSOP PW 24 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74LVC4245APWTE4 ACTIVE TSSOP PW 24 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Addendum-Page 1 (3) Samples (Requires Login) PACKAGE OPTION ADDENDUM www.ti.com Orderable Device SN74LVC4245APWTG4 14-Feb-2012 Status (1) ACTIVE Package Type Package Drawing TSSOP PW Pins Package Qty 24 250 Eco Plan (2) Green (RoHS & no Sb/Br) Lead/ Ball Finish MSL Peak Temp (3) Samples (Requires Login) CU NIPDAU Level-1-260C-UNLIM (1) The marketing status values are defined as follows: ACTIVE: Product device recommended for new designs. LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect. NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design. PREVIEW: Device has been announced but is not in production. Samples may or may not be available. OBSOLETE: TI has discontinued the production of the device. (2) Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check http://www.ti.com/productcontent for the latest availability information and additional product content details. TBD: The Pb-Free/Green conversion plan has not been defined. Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes. Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and package, or 2) lead-based die adhesive used between the die and leadframe. The component is otherwise considered Pb-Free (RoHS compatible) as defined above. Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame retardants (Br or Sb do not exceed 0.1% by weight in homogeneous material) (3) MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature. Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis. OTHER QUALIFIED VERSIONS OF SN74LVC4245A : * Enhanced Product: SN74LVC4245A-EP NOTE: Qualified Version Definitions: * Enhanced Product - Supports Defense, Aerospace and Medical Applications Addendum-Page 2 PACKAGE MATERIALS INFORMATION www.ti.com 14-Jul-2012 TAPE AND REEL INFORMATION *All dimensions are nominal Device SN74LVC4245ADBR Package Package Pins Type Drawing SPQ Reel Reel A0 Diameter Width (mm) (mm) W1 (mm) B0 (mm) K0 (mm) P1 (mm) W Pin1 (mm) Quadrant SSOP DB 24 2000 330.0 16.4 8.2 8.8 2.5 12.0 16.0 Q1 SN74LVC4245ADWR SOIC DW 24 2000 330.0 24.4 10.75 15.7 2.7 12.0 24.0 Q1 SN74LVC4245APWR TSSOP PW 24 2000 330.0 16.4 6.95 8.3 1.6 8.0 16.0 Q1 SN74LVC4245APWT TSSOP PW 24 250 330.0 16.4 6.95 8.3 1.6 8.0 16.0 Q1 Pack Materials-Page 1 PACKAGE MATERIALS INFORMATION www.ti.com 14-Jul-2012 *All dimensions are nominal Device Package Type Package Drawing Pins SPQ Length (mm) Width (mm) Height (mm) SN74LVC4245ADBR SSOP DB 24 2000 367.0 367.0 38.0 SN74LVC4245ADWR SOIC DW 24 2000 367.0 367.0 45.0 SN74LVC4245APWR TSSOP PW 24 2000 367.0 367.0 38.0 SN74LVC4245APWT TSSOP PW 24 250 367.0 367.0 38.0 Pack Materials-Page 2 MECHANICAL DATA MSSO002E - JANUARY 1995 - REVISED DECEMBER 2001 DB (R-PDSO-G**) PLASTIC SMALL-OUTLINE 28 PINS SHOWN 0,38 0,22 0,65 28 0,15 M 15 0,25 0,09 8,20 7,40 5,60 5,00 Gage Plane 1 14 0,25 A 0-8 0,95 0,55 Seating Plane 2,00 MAX 0,10 0,05 MIN PINS ** 14 16 20 24 28 30 38 A MAX 6,50 6,50 7,50 8,50 10,50 10,50 12,90 A MIN 5,90 5,90 6,90 7,90 9,90 9,90 12,30 DIM 4040065 /E 12/01 NOTES: A. B. C. D. All linear dimensions are in millimeters. This drawing is subject to change without notice. Body dimensions do not include mold flash or protrusion not to exceed 0,15. Falls within JEDEC MO-150 POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, enhancements, improvements and other changes to its semiconductor products and services per JESD46C and to discontinue any product or service per JESD48B. Buyers should obtain the latest relevant information before placing orders and should verify that such information is current and complete. All semiconductor products (also referred to herein as "components") are sold subject to TI's terms and conditions of sale supplied at the time of order acknowledgment. TI warrants performance of its components to the specifications applicable at the time of sale, in accordance with the warranty in TI's terms and conditions of sale of semiconductor products. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where mandated by applicable law, testing of all parameters of each component is not necessarily performed. TI assumes no liability for applications assistance or the design of Buyers' products. Buyers are responsible for their products and applications using TI components. To minimize the risks associated with Buyers' products and applications, Buyers should provide adequate design and operating safeguards. TI does not warrant or represent that any license, either express or implied, is granted under any patent right, copyright, mask work right, or other intellectual property right relating to any combination, machine, or process in which TI components or services are used. Information published by TI regarding third-party products or services does not constitute a license to use such products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from TI under the patents or other intellectual property of TI. Reproduction of significant portions of TI information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. TI is not responsible or liable for such altered documentation. Information of third parties may be subject to additional restrictions. Resale of TI components or services with statements different from or beyond the parameters stated by TI for that component or service voids all express and any implied warranties for the associated TI component or service and is an unfair and deceptive business practice. TI is not responsible or liable for any such statements. Buyer acknowledges and agrees that it is solely responsible for compliance with all legal, regulatory and safety-related requirements concerning its products, and any use of TI components in its applications, notwithstanding any applications-related information or support that may be provided by TI. Buyer represents and agrees that it has all the necessary expertise to create and implement safeguards which anticipate dangerous consequences of failures, monitor failures and their consequences, lessen the likelihood of failures that might cause harm and take appropriate remedial actions. Buyer will fully indemnify TI and its representatives against any damages arising out of the use of any TI components in safety-critical applications. In some cases, TI components may be promoted specifically to facilitate safety-related applications. With such components, TI's goal is to help enable customers to design and create their own end-product solutions that meet applicable functional safety standards and requirements. Nonetheless, such components are subject to these terms. No TI components are authorized for use in FDA Class III (or similar life-critical medical equipment) unless authorized officers of the parties have executed a special agreement specifically governing such use. Only those TI components which TI has specifically designated as military grade or "enhanced plastic" are designed and intended for use in military/aerospace applications or environments. Buyer acknowledges and agrees that any military or aerospace use of TI components which have not been so designated is solely at the Buyer's risk, and that Buyer is solely responsible for compliance with all legal and regulatory requirements in connection with such use. TI has specifically designated certain components which meet ISO/TS16949 requirements, mainly for automotive use. Components which have not been so designated are neither designed nor intended for automotive use; and TI will not be responsible for any failure of such components to meet such requirements. Products Applications Audio www.ti.com/audio Automotive and Transportation www.ti.com/automotive Amplifiers amplifier.ti.com Communications and Telecom www.ti.com/communications Data Converters dataconverter.ti.com Computers and Peripherals www.ti.com/computers DLP(R) Products www.dlp.com Consumer Electronics www.ti.com/consumer-apps DSP dsp.ti.com Energy and Lighting www.ti.com/energy Clocks and Timers www.ti.com/clocks Industrial www.ti.com/industrial Interface interface.ti.com Medical www.ti.com/medical Logic logic.ti.com Security www.ti.com/security Power Mgmt power.ti.com Space, Avionics and Defense www.ti.com/space-avionics-defense Microcontrollers microcontroller.ti.com Video and Imaging www.ti.com/video RFID www.ti-rfid.com OMAP Mobile Processors www.ti.com/omap TI E2E Community e2e.ti.com Wireless Connectivity www.ti.com/wirelessconnectivity Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265 Copyright (c) 2012, Texas Instruments Incorporated