IRF510 Data Sheet November 1999 5.6A, 100V, 0.540 Ohm, N-Channel Power MOSFET This N-Channel enhancement mode silicon gate power field effect transistor is an advanced power MOSFET designed, tested, and guaranteed to withstand a specified level of energy in the breakdown avalanche mode of operation. All of these power MOSFETs are designed for applications such as switching regulators, switching convertors, motor drivers, relay drivers, and drivers for high power bipolar switching transistors requiring high speed and low gate drive power. These types can be operated directly from integrated circuits. Formerly developmental type TA17441. Ordering Information PART NUMBER IRF510 PACKAGE TO-220AB File Number 1573.4 Features * 5.6A, 100V * rDS(ON) = 0.540 * Single Pulse Avalanche Energy Rated * SOA is Power Dissipation Limited * Nanosecond Switching Speeds * Linear Transfer Characteristics * High Input Impedance * Related Literature - TB334 "Guidelines for Soldering Surface Mount Components to PC Boards" Symbol BRAND D IRF510 NOTE: When ordering, include the entire part number. G S Packaging JEDEC TO-220AB SOURCE DRAIN GATE DRAIN (FLANGE) 1 CAUTION: These devices are sensitive to electrostatic discharge; follow proper ESD Handling Procedures. 1-888-INTERSIL or 321-724-7143 | Copyright (c) Intersil Corporation 1999 IRF510 Absolute Maximum Ratings TC = 25oC, Unless Otherwise Specified Drain to Source Voltage (Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .VDS Drain to Gate Voltage (RGS = 20k) (Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . VDGR Continuous Drain Current . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ID TC = 100oC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ID Pulsed Drain Current (Note 3) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . IDM Gate to Source Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .VGS Maximum Power Dissipation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .PD Linear Derating Factor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Single Pulse Avalanche Energy Rating (Note 4) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .EAS Operating and Storage Temperature Range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . TJ , TSTG Maximum Temperature for Soldering Leads at 0.063in (1.6mm) from Case for 10s. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . TL Package Body for 10s, See Techbrief 334 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Tpkg IRF510 100 100 5.6 4 20 20 43 0.29 19 -55 to 175 UNITS V V A A A V W W/oC mJ oC 300 260 oC oC CAUTION: Stresses above those listed in "Absolute Maximum Ratings" may cause permanent damage to the device. This is a stress only rating and operation of the device at these or any other conditions above those indicated in the operational sections of this specification is not implied. NOTE: 1. TJ = 25oC to 150oC. TC = 25oC, Unless Otherwise Specified Electrical Specifications PARAMETER SYMBOL TEST CONDITIONS MIN TYP MAX UNITS Drain to Source Breakdown Voltage BVDSS VGS = 0V, ID = 250A, (Figure 10) 100 - - V Gate to Threshold Voltage VGS(TH) VGS = VDS, ID = 250A 2.0 - 4.0 V Zero-Gate Voltage Drain Current On-State Drain Current (Note 2) IDSS ID(ON) Gate to Source Leakage Current IGSS Drain to Source On Resistance (Note 2) Forward Transconductance (Note 2) Turn-On Delay Time rDS(ON) gfs td(ON) Rise Time tr Turn-Off Delay Time td(OFF) Fall Time - - 25 A VDS = 0.8 x Rated BVDSS, VGS = 0V, TJ = 150oC - - 250 A VDS > ID(ON) x rDS(ON)MAX , VGS = 10V (Figure 7) 5.6 - - A VDS = 95V, VGS = 0V VGS = 20V - - 100 nA VGS = 10V, ID = 3.4A (Figures 8, 9) - 0.4 0.54 1.3 2.0 - S - 8 12 ns - 25 63 ns - 15 7 ns - 12 59 ns - 5.0 30 nC - 2.0 - nC - 3.0 - nC VGS = 50V, ID = 3.4A (Figure 12) ID 5.6A, RGS = 24, VDD = 50V, RL = 9, VDD = 50V, VGS = 10V MOSFET switching times are essentially independent of operating temperature tf Total Gate Charge (Gate to Source + Gate to Drain) Qg(TOT) Gate to Source Charge Qgs Gate to Drain "Miller" Charge Qgd VGS = 10V, ID = 5.6A, VDS = 0.8 x Rated BVDSS, IG(REF) = 1.5mA (Figure 14) Gate charge is essentially independent of operating temperature. Input Capacitance CISS - 135 - pF Output Capacitance COSS - 80 - pF Reverse-Transfer Capacitance CRSS - 20 - pF - 3.5 - nH - 4.5 - nH - 7.5 - nH - - 3.5 oC/W - - 80 oC/W Internal Drain Inductance LD VGS = 0V, VDS = 25V, f = 1.0MHz (Figure 11) Measured From the Contact Screw On Tab To Center of Die Measured From the Drain Lead, 6mm (0.25in) From Package to Center of Die Internal Source Inductance LS Junction to Case RJC Junction to Ambient RJA 2 Measured From The Source Lead, 6mm (0.25in) From Header to Source Bonding Pad Free air operation Modified MOSFET Symbol Showing the Internal Devices Inductances D LD G LS S IRF510 Source to Drain Diode Specifications PARAMETER SYMBOL Continuous Source to Drain Current Pulse Source to Drain Current (Note 3) ISD ISDM Test Conditions Modified MOSFET Symbol Showing the Integral Reverse P-N Junction Diode D MIN TYP MAX UNITS - - 5.6 A - - 20 A - - 2.5 V G S Source to Drain Diode Voltage (Note 2) Reverse Recovery Time Reverse Recovered Charge VSD TJ = 25oC, ISD = 5.6A, VGS = 0V (Figure 13) trr TJ = 25oC, ISD = 5.6A, dISD/dt = 100A/s 4.6 96 200 ns QRR TJ = 25oC, ISD = 5.6A, dISD/dt = 100A/s 0.17 0.4 0.83 C NOTES: 2. Pulse test: pulse width 300s, duty cycle 2%. 3. Repetitive rating: pulse width limited by max junction temperature. See Transient Thermal Impedance curve (Figure 3). 4. VDD = 25V, start TJ = 25oC, L = 910H, RG = 25, peak IAS = 5.6A. Typical Performance Curves Unless Otherwise Specified 10 ID, DRAIN CURRENT (A) 1.0 0.8 0.6 0.4 8 6 4 2 0.2 0 0 25 0 125 50 75 100 TC , CASE TEMPERATURE (oC) 150 175 25 50 75 125 100 150 175 TC , CASE TEMPERATURE (oC) FIGURE 1. NORMALIZED POWER DISSIPATION vs CASE TEMPERATURE FIGURE 2. MAXIMUM CONTINUOUS DRAIN CURRENT vs CASE TEMPERATURE ZJC, TRANSIENT 10 THERMAL IMPEDANCE (oC/W) POWER DISSIPATION MULTIPLIER 1.2 0.5 1 0.2 0.1 0.05 0.1 PDM 0.02 0.01 t1 t2 SINGLE PULSE NOTES: DUTY FACTOR: D = t1/t2 PEAK TJ = PDM x ZJC + TC 0.01 10-5 10-4 0.1 10-2 10-3 t1, RECTANGULAR PULSE DURATION (S) FIGURE 3. MAXIMUM TRANSIENT THERMAL IMPEDANCE 3 1 10 IRF510 Typical Performance Curves Unless Otherwise Specified 10 OPERATION IN THIS REGION IS LIMITED BY rDS(ON) VGS = 10V ID, DRAIN CURRENT (A) ID, DRAIN CURRENT (A) 100 10s 10 100s 1ms 1 TC = 25oC TJ = 175oC SINGLE PULSE 0.1 (Continued) 1 PULSE DURATION = 80s DUTY CYCLE = 0.5% MAX 8 VGS = 8V 6 VGS = 7V 4 VGS = 6V 2 VGS = 5V VGS = 4V 0 102 10 0 103 10 FIGURE 4. FORWARD BIAS SAFE OPERATING AREA ID(ON), ON-STATE DRAIN CURRENT (A) ID, DRAIN CURRENT (A) VGS = 10V 8 VGS = 8V 6 VGS = 7V 4 VGS = 6V 2 VGS = 5V VGS = 4V 0 2 4 6 8 VDS, DRAIN TO SOURCE VOLTAGE (V) 10 0.1 3.0 NORMALIZED ON RESISTANCE ON RESISTANCE () rDS(ON), DRAIN TO SOURCE 4 3 2 VGS = 10V VGS = 20V 1 0 12 16 ID, DRAIN CURRENT (A) FIGURE 8. DRAIN TO SOURCE ON RESISTANCE vs GATE VOLTAGE AND DRAIN CURRENT 4 TJ = 25oC TJ = 175oC 2 4 6 8 VGS , GATE TO SOURCE VOLTAGE (V) 10 FIGURE 7. TRANSFER CHARACTERISTICS PULSE DURATION = 80s DUTY CYCLE = 0.5% MAX 8 VDS 50V PULSE DURATION = 80s DUTY CYCLE = 0.5% MAX 10-2 0 10 5 4 50 1 FIGURE 6. SATURATION CHARACTERISTICS 0 40 FIGURE 5. OUTPUT CHARACTERISTICS 10 0 30 VDS , DRAIN TO SOURCE VOLTAGE (V) VDS , DRAIN TO SOURCE VOLTAGE (V) PULSE DURATION = 80s DUTY CYCLE = 0.5% MAX 20 20 2.4 ID = 3.4A, VGS = 10V PULSE DURATION = 80s DUTY CYCLE = 0.5% MAX 1.8 1.2 0.6 0 -60 -40 -20 0 20 40 60 80 100 120 140 160 180 TJ, JUNCTION TEMPERATURE (oC) FIGURE 9. NORMALIZED DRAIN TO SOURCE ON RESISTANCE vs JUNCTION TEMPERATURE IRF510 Typical Performance Curves Unless Otherwise Specified (Continued) 1.25 500 1.15 C, CAPACITANCE (pF) NORMALIZED DRAIN TO SOURCE BREAKDOWN VOLTAGE ID = 250A 1.05 0.95 VGS = 0V, f = 1MHz CISS = CGS + CGD 400 CRSS = CGD COSS CDS + CGD 300 200 CISS COSS 0.85 100 0.75 -60 -40 -20 0 CRSS 0 20 40 80 60 100 120 140 160 180 1 2 TJ, JUNCTION TEMPERATURE (oC) FIGURE 10. NORMALIZED DRAIN TO SOURCE BREAKDOWN VOLTAGE vs JUNCTION TEMPERATURE TJ = 25oC 1.5 TJ = 175oC 1.0 0.5 0 0 2 2 5 102 FIGURE 11. CAPACITANCE vs DRAIN TO SOURCE VOLTAGE ISD, SOURCE TO DRAIN CURRENT (A) 2.0 10 100 PULSE DURATION = 80s DUTY CYCLE = 0.5% MAX VDS 50V 4 6 ID, DRAIN CURRENT (A) 8 PULSE DURATION = 80s DUTY CYCLE = 0.5% MAX 10 1 TJ = 175oC TJ = 25oC 0.1 0 10 FIGURE 12. TRANSCONDUCTANCE vs DRAIN CURRENT 0.4 0.8 1.2 1.6 VSD, SOURCE TO DRAIN VOLTAGE (V) FIGURE 13. SOURCE TO DRAIN DIODE VOLTAGE 20 VGS, GATE TO SOURCE VOLTAGE (V) gfs, TRANSCONDUCTANCE (S) 2.5 5 VDS, DRAIN TO SOURCE VOLTAGE (V) ID = 3.4A VDS = 80V VDS = 50V VDS = 20V 16 12 8 4 0 0 2 4 6 Qg, GATE CHARGE (nC) 8 10 FIGURE 14. GATE TO SOURCE VOLTAGE vs GATE CHARGE 5 2.0 IRF510 Test Circuits and Waveforms VDS BVDSS L tP VARY tP TO OBTAIN IAS + RG REQUIRED PEAK IAS VDS VDD VDD - VGS DUT tP 0V IAS 0 0.01 tAV FIGURE 15. UNCLAMPED ENERGY TEST CIRCUIT FIGURE 16. UNCLAMPED ENERGY WAVEFORMS tON tOFF td(ON) td(OFF) tf tr RL VDS 90% 90% + RG - VDD 10% 10% 0 DUT 90% VGS VGS 0 FIGURE 17. SWITCHING TIME TEST CIRCUIT 0.2F 50% PULSE WIDTH 10% FIGURE 18. RESISTIVE SWITCHING WAVEFORMS VDS (ISOLATED SUPPLY) CURRENT REGULATOR 12V BATTERY 50% VDD Qg(TOT) SAME TYPE AS DUT 50k Qgd 0.3F VGS Qgs D VDS DUT G 0 IG(REF) S 0 IG CURRENT SAMPLING RESISTOR VDS ID CURRENT SAMPLING RESISTOR FIGURE 19. GATE CHARGE TEST CIRCUIT 6 IG(REF) 0 FIGURE 20. GATE CHARGE WAVEFORM IRF510 All Intersil semiconductor products are manufactured, assembled and tested under ISO9000 quality systems certification. Intersil semiconductor products are sold by description only. Intersil Corporation reserves the right to make changes in circuit design and/or specifications at any time without notice. Accordingly, the reader is cautioned to verify that data sheets are current before placing orders. Information furnished by Intersil is believed to be accurate and reliable. However, no responsibility is assumed by Intersil or its subsidiaries for its use; nor for any infringements of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of Intersil or its subsidiaries. For information regarding Intersil Corporation and its products, see web site http://www.intersil.com Sales Office Headquarters NORTH AMERICA Intersil Corporation P. O. Box 883, Mail Stop 53-204 Melbourne, FL 32902 TEL: (407) 724-7000 FAX: (407) 724-7240 EUROPE Intersil SA Mercure Center 100, Rue de la Fusee 1130 Brussels, Belgium TEL: (32) 2.724.2111 FAX: (32) 2.724.22.05 7 ASIA Intersil (Taiwan) Ltd. 7F-6, No. 101 Fu Hsing North Road Taipei, Taiwan Republic of China TEL: (886) 2 2716 9310 FAX: (886) 2 2715 3029