Special Features
Electrical Specs
240 Watts
AM80A
• 1MHz Fixed frequency
• 100°C Baseplate operating temperature
(no derating)
• Low output ripple and noise
• Excellent transient response
• Safety isolated low voltage interface
with ALP™linear control
• High reliability - over 1 million hours MTBF
• Wide input voltage range
• Parallelable with accurate current sharing
• Current and temperature monitoring outputs
Operating temperature (baseplate):
-20°C to +100°C
Storage temperature: -40°C to +105°C
Overtemperature protection: 110°C typical
MTBF: > 1 million hours (50°C baseplate)
UL UL 1950 E132002
CSA CSA22.2-234 LR53982C
CSA22.2-950
VDE IED950 20396-3336-1005 & 1006
EN 60950
CE CEMark (LVD)
Input
Input Range 18 - 36V or 36 - 72 VDC
or 90 - 200 VDC or 180 - 400 VDC
Efficiency 84% typical (5V @ 40A)
87% typical (12V @ 18A)
Output
Load Regulation 0.1% typical down to no load
Line Regulation 0.02% typical
Noise/Ripple 50 mV typical (output below 5V)
1% typical (output 5V and over)
Remote sense Up to 0.5V
Output Voltage
Adjust Range ±20% of nominal
Transient Response 3% typical deviation with 300µs recovery
(25-75% full load)
Current Share Accuracy 3% typical
Overvoltage Protection 115% Vo (nominal)
Current Limit 110% Io maximum
Control
Voltage Adjust 80 to 120% Vo linear programming
Enable TTL compatible (low to enable)
Current Limit Adjust 20 to 100% Io linear programming
Clock Input
(external sync) 3.3 to 5.5Vp-p @ 1MHz ± 10%
Clock Output
(internal clock) 4.5Vp-p typical@ 1MHz ± 0.5%
Power Good
Identification High (Vo) = power good
Temperature
Monitor Output 10 mV/°K (2.73V = 0°C)
Current Monitor Output 0 to 1mA (1 mA = 100% Io rated)
Over Voltage
Protection Adjust 110 to 150% Vo linear programming by
voltage or resistor
Notes
Nominal values apply with sense pins connected and other control
pins unconnected.
Specifications subject to change without notice.
Environmental
Total Power: 240 Watts
Input Voltages: 24V, 48V, 150V, 300V, or 320V
No. of Outputs: Single
Environmental
Astec Integrated Power
America’s (USA): 1-888-41-ASTEC Europe (UK): 44 (1384) 842-211 Asia (HK): 852-2437-9662
54
W9959_02_DCDC_001-073_73 2/8/02 3:55 PM Page 54