TC7SH14FU
1
CMOS Digital Integrated Circuits Silicon Monolithic
TC7SH14FU
TC7SH14FU
TC7SH14FU
TC7SH14FU
Start of commercial production
1994-03
1.
1.
1.
1. Functional Description
Functional Description
Functional Description
Functional Description
• Schmitt Inverter
2.
2.
2.
2. Features
Features
Features
Features
(1) AEC-Q100 (Rev. H) (Note 1)
(2) Wide operating temperature range: Topr = -40 to 125 (Note 2)
(3) High speed operation: tpd = 5.5 ns (typ.) (VCC = 5.0 V, CL = 15 pF)
(4) Low power dissipation: ICC = 2.0 µA (max) (Ta = 25 )
(5) High noise immunity: VNIH = VNIL = 28 % VCC (min)
(6) 5.5 V tolerant inputs
(7) Wide operating voltage range: VCC = 2.0 to 5.5 V
Note 1: This device is compliant with the reliability requirements of AEC-Q100. For details, contact your Toshiba sales
representative.
Note 2: For devices with the ordering part number ending in J(CT. Topr = -40 to 85 for the other devices.
3.
3.
3.
3. Packaging
Packaging
Packaging
Packaging
USV
2017-05-16
Rev.3.0
©2016 Toshiba Corporation
TC7SH14FU
2
4.
4.
4.
4. Marking and Pin Assignment
Marking and Pin Assignment
Marking and Pin Assignment
Marking and Pin Assignment
Marking
Marking
Marking
Marking Pin Assignment (Top view)
Pin Assignment (Top view)
Pin Assignment (Top view)
Pin Assignment (Top view)
5.
5.
5.
5. IEC Logic Symbol
IEC Logic Symbol
IEC Logic Symbol
IEC Logic Symbol
6.
6.
6.
6. Truth Table
Truth Table
Truth Table
Truth Table
A
L
H
Y
H
L
7.
7.
7.
7. Absolute Maximum Ratings (Note) (Unless otherwise specified, T
Absolute Maximum Ratings (Note) (Unless otherwise specified, T
Absolute Maximum Ratings (Note) (Unless otherwise specified, T
Absolute Maximum Ratings (Note) (Unless otherwise specified, Ta
a
a
a = 25
= 25
= 25
= 25
)
)
)
)
Characteristics
Supply voltage
Input voltage
DC output voltage
Input diode current
Output diode current
DC output current
VCC/ground current
Power dissipation
Storage temperature
Symbol
VCC
VIN
VOUT
IIK
IOK
IOUT
ICC
PD
Tstg
Note
(Note 1)
Rating
-0.5 to 7.0
-0.5 to 7.0
-0.5 to VCC + 0.5
-20
±20
±25
±50
200
-65 to 150
Unit
V
mA
mW
Note: Exceeding any of the absolute maximum ratings, even briefly, lead to deterioration in IC performance or even
destruction.
Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the
significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even
if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum
ratings and the operating ranges.
Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook
(“Handling Precautions”/“Derating Concept and Methods”) and individual reliability data (i.e. reliability test report
and estimated failure rate, etc).
Note 1: VOUT < GND, VOUT > VCC
2017-05-16
Rev.3.0
©2016 Toshiba Corporation
TC7SH14FU
3
8.
8.
8.
8. Operating Ranges (Note)
Operating Ranges (Note)
Operating Ranges (Note)
Operating Ranges (Note)
Characteristics
Supply voltage
Input voltage
Output voltage
Operating temperature
Symbol
VCC
VIN
VOUT
Topr
Note
(Note 1)
(Note 2)
Test Condition
Rating
2.0 to 5.5
0 to 5.5
0 to VCC
-40 to 125
-40 to 85
Unit
V
Note: The operating ranges must be maintained to ensure the normal operation of the device.
Unused inputs must be tied to either VCC or GND.
Note 1: For devices with the ordering part number ending in J(CT.
Note 2: For devices except those with the ordering part number ending in J(CT.
9.
9.
9.
9. Electrical Characteristics
Electrical Characteristics
Electrical Characteristics
Electrical Characteristics
9.1.
9.1.
9.1.
9.1. DC Characteristics (Unless otherwise specified, T
DC Characteristics (Unless otherwise specified, T
DC Characteristics (Unless otherwise specified, T
DC Characteristics (Unless otherwise specified, Ta
a
a
a = 25
= 25
= 25
= 25
)
)
)
)
Characteristics
Positive threshold voltage
Negative threshold voltage
Hysteresis voltage
High-level output voltage
Low-level output voltage
Input leakage current
Quiescent supply current
Symbol
VP
VN
VH
VOH
VOL
IIN
ICC
Test Condition
VIN = VIL
VIN = VIH
VIN = 5.5 V or GND
VIN = VCC or GND
IOH = -50 µA
IOH = -4 mA
IOH = -8 mA
IOL = 50 µA
IOL = 4 mA
IOL = 8 mA
VCC (V)
3.0
4.5
5.5
3.0
4.5
5.5
3.0
4.5
5.5
2.0
3.0
4.5
3.0
4.5
2.0
3.0
4.5
3.0
4.5
0 to 5.5
5.5
Min
0.90
1.35
1.65
0.30
0.40
0.50
1.9
2.9
4.4
2.58
3.94
Typ.
2.0
3.0
4.5
0.0
0.0
0.0
Max
2.20
3.15
3.85
1.20
1.40
1.60
0.1
0.1
0.1
0.36
0.36
±0.1
2.0
Unit
V
V
V
V
V
µA
µA
2017-05-16
Rev.3.0
©2016 Toshiba Corporation
TC7SH14FU
4
9.2.
9.2.
9.2.
9.2. DC Characteristics (Unless otherwise specified, T
DC Characteristics (Unless otherwise specified, T
DC Characteristics (Unless otherwise specified, T
DC Characteristics (Unless otherwise specified, Ta
a
a
a = -40 to 85
= -40 to 85
= -40 to 85
= -40 to 85
)
)
)
)
Characteristics
Positive threshold voltage
Negative threshold voltage
Hysteresis voltage
High-level output voltage
Low-level output voltage
Input leakage current
Quiescent supply current
Symbol
VP
VN
VH
VOH
VOL
IIN
ICC
Test Condition
VIN = VIL
VIN = VIH
VIN = 5.5 V or GND
VIN = VCC or GND
IOH = -50 µA
IOH = -4 mA
IOH = -8 mA
IOL = 50 µA
IOL = 4 mA
IOL = 8 mA
VCC (V)
3.0
4.5
5.5
3.0
4.5
5.5
3.0
4.5
5.5
2.0
3.0
4.5
3.0
4.5
2.0
3.0
4.5
3.0
4.5
0 to 5.5
5.5
Min
0.90
1.35
1.65
0.30
0.40
0.50
1.9
2.9
4.4
2.48
3.80
Max
2.20
3.15
3.85
1.20
1.40
1.60
0.1
0.1
0.1
0.44
0.44
±1.0
20.0
Unit
V
V
V
V
V
µA
µA
9.3.
9.3.
9.3.
9.3. DC Characteristics (Note) (Unless otherwise specified, T
DC Characteristics (Note) (Unless otherwise specified, T
DC Characteristics (Note) (Unless otherwise specified, T
DC Characteristics (Note) (Unless otherwise specified, Ta
a
a
a = -40 to 125
= -40 to 125
= -40 to 125
= -40 to 125
)
)
)
)
Characteristics
Positive threshold voltage
Negative threshold voltage
Hysteresis voltage
High-level output voltage
Low-level output voltage
Input leakage current
Quiescent supply current
Symbol
VP
VN
VH
VOH
VOL
IIN
ICC
Test Condition
VIN = VIL
VIN = VIH
VIN = 5.5 V or GND
VIN = VCC or GND
IOH = -50 µA
IOH = -4 mA
IOH = -8 mA
IOL = 50 µA
IOL = 4 mA
IOL = 8 mA
VCC (V)
3.0
4.5
5.5
3.0
4.5
5.5
3.0
4.5
5.5
2.0
3.0
4.5
3.0
4.5
2.0
3.0
4.5
3.0
4.5
0 to 5.5
5.5
Min
0.90
1.35
1.65
0.30
0.40
0.50
1.9
2.9
4.4
2.40
3.70
Max
2.20
3.15
3.85
1.20
1.40
1.60
0.1
0.1
0.1
0.55
0.55
±2.0
40.0
Unit
V
V
V
V
V
µA
µA
Note: For devices with the ordering part number ending in J(CT.
2017-05-16
Rev.3.0
©2016 Toshiba Corporation
TC7SH14FU
5
9.4.
9.4.
9.4.
9.4. AC Characteristics (Unless otherwise specified, T
AC Characteristics (Unless otherwise specified, T
AC Characteristics (Unless otherwise specified, T
AC Characteristics (Unless otherwise specified, Ta
a
a
a = 25
= 25
= 25
= 25
, Input: t
, Input: t
, Input: t
, Input: tr
r
r
r = t
= t
= t
= tf
f
f
f = 3 ns)
= 3 ns)
= 3 ns)
= 3 ns)
Characteristics
Propagation delay time
Input capacitance
Power dissipation
capacitance
Symbol
tPLH,tPHL
CIN
CPD
Note
(Note 1)
Test
Condition
VCC (V)
3.3 ± 0.3
5.0 ± 0.5
CL (pF)
15
50
15
50
Min
Typ.
8.3
10.8
5.5
7.0
4
14
Max
12.8
16.3
8.6
10.6
10
Unit
ns
pF
pF
Note 1: CPD is defined as the value of the internal equivalent capacitance which is calculated from the operating current
consumption without load. Average operating current can be obtained by the equation.
ICC(opr) = CPDVCCfIN + ICC
9.5.
9.5.
9.5.
9.5. AC Characteristics
AC Characteristics
AC Characteristics
AC Characteristics
(Unless otherwise specified, T
(Unless otherwise specified, T
(Unless otherwise specified, T
(Unless otherwise specified, Ta
a
a
a = -40 to 85
= -40 to 85
= -40 to 85
= -40 to 85
, Input: t
, Input: t
, Input: t
, Input: tr
r
r
r = t
= t
= t
= tf
f
f
f = 3 ns)
= 3 ns)
= 3 ns)
= 3 ns)
Characteristics
Propagation delay time
Input capacitance
Symbol
tPLH,tPHL
CIN
Test Condition
VCC (V)
3.3 ± 0.3
5.0 ± 0.5
CL (pF)
15
50
15
50
Min
1.0
1.0
1.0
1.0
Max
15.0
18.5
10.0
12.0
10
Unit
ns
pF
9.6.
9.6.
9.6.
9.6. AC Characteristics (Note)
AC Characteristics (Note)
AC Characteristics (Note)
AC Characteristics (Note)
(Unless otherwise specified, T
(Unless otherwise specified, T
(Unless otherwise specified, T
(Unless otherwise specified, Ta
a
a
a = -40 to 125
= -40 to 125
= -40 to 125
= -40 to 125
, Input: t
, Input: t
, Input: t
, Input: tr
r
r
r = t
= t
= t
= tf
f
f
f = 3 ns)
= 3 ns)
= 3 ns)
= 3 ns)
Characteristics
Propagation delay time
Input capacitance
Symbol
tPLH,tPHL
CIN
Test Condition
VCC (V)
3.3 ± 0.3
5.0 ± 0.5
CL (pF)
15
50
15
50
Min
1.0
1.0
1.0
1.0
Max
17.0
20.5
11.5
13.5
10
Unit
ns
pF
Note: For devices with the ordering part number ending in J(CT.
2017-05-16
Rev.3.0
©2016 Toshiba Corporation
TC7SH14FU
6
Package Dimensions
Package Dimensions
Package Dimensions
Package Dimensions
Unit: mm
Weight: 0.006 g (typ.)
Package Name(s)
JEDEC: SOT-353
Nickname: USV
2017-05-16
Rev.3.0
©2016 Toshiba Corporation
TC7SH14FU
7
RESTRICTIONS ON PRODUCT USE
RESTRICTIONS ON PRODUCT USE
RESTRICTIONS ON PRODUCT USE
RESTRICTIONS ON PRODUCT USE
• Toshiba Corporation, and its subsidiaries and affiliates (collectively "TOSHIBA"), reserve the right to make changes to the information
in this document, and related hardware, software and systems (collectively "Product") without notice.
• This document and any information herein may not be reproduced without prior written permission from TOSHIBA. Even with TOSHIBA's
written permission, reproduction is permissible only if reproduction is without alteration/omission.
• Though TOSHIBA works continually to improve Product's quality and reliability, Product can malfunction or fail. Customers are responsible
for complying with safety standards and for providing adequate designs and safeguards for their hardware, software and systems which
minimize risk and avoid situations in which a malfunction or failure of Product could cause loss of human life, bodily injury or damage
to property, including data loss or corruption. Before customers use the Product, create designs including the Product, or incorporate
the Product into their own applications, customers must also refer to and comply with (a) the latest versions of all relevant TOSHIBA
information, including without limitation, this document, the specifications, the data sheets and application notes for Product and the
precautions and conditions set forth in the "TOSHIBA Semiconductor Reliability Handbook" and (b) the instructions for the application
with which the Product will be used with or for. Customers are solely responsible for all aspects of their own product design or applications,
including but not limited to (a) determining the appropriateness of the use of this Product in such design or applications; (b) evaluating
and determining the applicability of any information contained in this document, or in charts, diagrams, programs, algorithms, sample
application circuits, or any other referenced documents; and (c) validating all operating parameters for such designs and applications.
TOSHIBA ASSUMES NO LIABILITY FOR CUSTOMERS' PRODUCT DESIGN OR APPLICATIONS.
TOSHIBA ASSUMES NO LIABILITY FOR CUSTOMERS' PRODUCT DESIGN OR APPLICATIONS.
TOSHIBA ASSUMES NO LIABILITY FOR CUSTOMERS' PRODUCT DESIGN OR APPLICATIONS.
TOSHIBA ASSUMES NO LIABILITY FOR CUSTOMERS' PRODUCT DESIGN OR APPLICATIONS.
• PRODUCT IS NEITHER INTENDED NOR WARRANTED FOR USE IN EQUIPMENTS OR SYSTEMS THAT REQUIRE
PRODUCT IS NEITHER INTENDED NOR WARRANTED FOR USE IN EQUIPMENTS OR SYSTEMS THAT REQUIRE
PRODUCT IS NEITHER INTENDED NOR WARRANTED FOR USE IN EQUIPMENTS OR SYSTEMS THAT REQUIRE
PRODUCT IS NEITHER INTENDED NOR WARRANTED FOR USE IN EQUIPMENTS OR SYSTEMS THAT REQUIRE
EXTRAORDINARILY HIGH LEVELS OF QUALITY AND/OR RELIABILITY, AND/OR A MALFUNCTION OR FAILURE OF WHICH MAY
EXTRAORDINARILY HIGH LEVELS OF QUALITY AND/OR RELIABILITY, AND/OR A MALFUNCTION OR FAILURE OF WHICH MAY
EXTRAORDINARILY HIGH LEVELS OF QUALITY AND/OR RELIABILITY, AND/OR A MALFUNCTION OR FAILURE OF WHICH MAY
EXTRAORDINARILY HIGH LEVELS OF QUALITY AND/OR RELIABILITY, AND/OR A MALFUNCTION OR FAILURE OF WHICH MAY
CAUSE LOSS OF HUMAN LIFE, BODILY INJURY, SERIOUS PROPERTY DAMAGE AND/OR SERIOUS PUBLIC IMPACT
CAUSE LOSS OF HUMAN LIFE, BODILY INJURY, SERIOUS PROPERTY DAMAGE AND/OR SERIOUS PUBLIC IMPACT
CAUSE LOSS OF HUMAN LIFE, BODILY INJURY, SERIOUS PROPERTY DAMAGE AND/OR SERIOUS PUBLIC IMPACT
CAUSE LOSS OF HUMAN LIFE, BODILY INJURY, SERIOUS PROPERTY DAMAGE AND/OR SERIOUS PUBLIC IMPACT
("UNINTENDED USE").
("UNINTENDED USE").
("UNINTENDED USE").
("UNINTENDED USE"). Except for specific applications as expressly stated in this document, Unintended Use includes, without limitation,
equipment used in nuclear facilities, equipment used in the aerospace industry, medical equipment, equipment used for automobiles,
trains, ships and other transportation, traffic signaling equipment, equipment used to control combustions or explosions, safety devices,
elevators and escalators, devices related to electric power, and equipment used in finance-related fields. IF YOU USE PRODUCT FOR
IF YOU USE PRODUCT FOR
IF YOU USE PRODUCT FOR
IF YOU USE PRODUCT FOR
UNINTENDED USE, TOSHIBA ASSUMES NO LIABILITY FOR PRODUCT.
UNINTENDED USE, TOSHIBA ASSUMES NO LIABILITY FOR PRODUCT.
UNINTENDED USE, TOSHIBA ASSUMES NO LIABILITY FOR PRODUCT.
UNINTENDED USE, TOSHIBA ASSUMES NO LIABILITY FOR PRODUCT. For details, please contact your TOSHIBA sales
representative.
• Do not disassemble, analyze, reverse-engineer, alter, modify, translate or copy Product, whether in whole or in part.
• Product shall not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited under any
applicable laws or regulations.
• The information contained herein is presented only as guidance for Product use. No responsibility is assumed by TOSHIBA for any
infringement of patents or any other intellectual property rights of third parties that may result from the use of Product. No license to any
intellectual property right is granted by this document, whether express or implied, by estoppel or otherwise.
• ABSENT A WRITTEN SIGNED AGREEMENT, EXCEPT AS PROVIDED IN THE RELEVANT TERMS AND CONDITIONS OF SALE
ABSENT A WRITTEN SIGNED AGREEMENT, EXCEPT AS PROVIDED IN THE RELEVANT TERMS AND CONDITIONS OF SALE
ABSENT A WRITTEN SIGNED AGREEMENT, EXCEPT AS PROVIDED IN THE RELEVANT TERMS AND CONDITIONS OF SALE
ABSENT A WRITTEN SIGNED AGREEMENT, EXCEPT AS PROVIDED IN THE RELEVANT TERMS AND CONDITIONS OF SALE
FOR PRODUCT, AND TO THE MAXIMUM EXTENT ALLOWABLE BY LAW, TOSHIBA (1) ASSUMES NO LIABILITY WHATSOEVER,
FOR PRODUCT, AND TO THE MAXIMUM EXTENT ALLOWABLE BY LAW, TOSHIBA (1) ASSUMES NO LIABILITY WHATSOEVER,
FOR PRODUCT, AND TO THE MAXIMUM EXTENT ALLOWABLE BY LAW, TOSHIBA (1) ASSUMES NO LIABILITY WHATSOEVER,
FOR PRODUCT, AND TO THE MAXIMUM EXTENT ALLOWABLE BY LAW, TOSHIBA (1) ASSUMES NO LIABILITY WHATSOEVER,
INCLUDING WITHOUT LIMITATION, INDIRECT, CONSEQUENTIAL, SPECIAL, OR INCIDENTAL DAMAGES OR LOSS, INCLUDING
INCLUDING WITHOUT LIMITATION, INDIRECT, CONSEQUENTIAL, SPECIAL, OR INCIDENTAL DAMAGES OR LOSS, INCLUDING
INCLUDING WITHOUT LIMITATION, INDIRECT, CONSEQUENTIAL, SPECIAL, OR INCIDENTAL DAMAGES OR LOSS, INCLUDING
INCLUDING WITHOUT LIMITATION, INDIRECT, CONSEQUENTIAL, SPECIAL, OR INCIDENTAL DAMAGES OR LOSS, INCLUDING
WITHOUT LIMITATION, LOSS OF PROFITS, LOSS OF OPPORTUNITIES, BUSINESS INTERRUPTION AND LOSS OF DATA, AND
WITHOUT LIMITATION, LOSS OF PROFITS, LOSS OF OPPORTUNITIES, BUSINESS INTERRUPTION AND LOSS OF DATA, AND
WITHOUT LIMITATION, LOSS OF PROFITS, LOSS OF OPPORTUNITIES, BUSINESS INTERRUPTION AND LOSS OF DATA, AND
WITHOUT LIMITATION, LOSS OF PROFITS, LOSS OF OPPORTUNITIES, BUSINESS INTERRUPTION AND LOSS OF DATA, AND
(2) DISCLAIMS ANY AND ALL EXPRESS OR IMPLIED WARRANTIES AND CONDITIONS RELATED TO SALE, USE OF PRODUCT,
(2) DISCLAIMS ANY AND ALL EXPRESS OR IMPLIED WARRANTIES AND CONDITIONS RELATED TO SALE, USE OF PRODUCT,
(2) DISCLAIMS ANY AND ALL EXPRESS OR IMPLIED WARRANTIES AND CONDITIONS RELATED TO SALE, USE OF PRODUCT,
(2) DISCLAIMS ANY AND ALL EXPRESS OR IMPLIED WARRANTIES AND CONDITIONS RELATED TO SALE, USE OF PRODUCT,
OR INFORMATION, INCLUDING WARRANTIES OR CONDITIONS OF MERCHANTABILITY, FITNESS FOR A PARTICULAR
OR INFORMATION, INCLUDING WARRANTIES OR CONDITIONS OF MERCHANTABILITY, FITNESS FOR A PARTICULAR
OR INFORMATION, INCLUDING WARRANTIES OR CONDITIONS OF MERCHANTABILITY, FITNESS FOR A PARTICULAR
OR INFORMATION, INCLUDING WARRANTIES OR CONDITIONS OF MERCHANTABILITY, FITNESS FOR A PARTICULAR
PURPOSE, ACCURACY OF INFORMATION, OR NONINFRINGEMENT.
PURPOSE, ACCURACY OF INFORMATION, OR NONINFRINGEMENT.
PURPOSE, ACCURACY OF INFORMATION, OR NONINFRINGEMENT.
PURPOSE, ACCURACY OF INFORMATION, OR NONINFRINGEMENT.
• Do not use or otherwise make available Product or related software or technology for any military purposes, including without limitation,
for the design, development, use, stockpiling or manufacturing of nuclear, chemical, or biological weapons or missile technology products
(mass destruction weapons). Product and related software and technology may be controlled under the applicable export laws and
regulations including, without limitation, the Japanese Foreign Exchange and Foreign Trade Law and the U.S. Export Administration
Regulations. Export and re-export of Product or related software or technology are strictly prohibited except in compliance with all
applicable export laws and regulations.
• Please contact your TOSHIBA sales representative for details as to environmental matters such as the RoHS compatibility of Product.
Please use Product in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances,
including without limitation, the EU RoHS Directive. TOSHIBA ASSUMES NO LIABILITY FOR DAMAGES OR LOSSES OCCURRING
TOSHIBA ASSUMES NO LIABILITY FOR DAMAGES OR LOSSES OCCURRING
TOSHIBA ASSUMES NO LIABILITY FOR DAMAGES OR LOSSES OCCURRING
TOSHIBA ASSUMES NO LIABILITY FOR DAMAGES OR LOSSES OCCURRING
AS A RESULT OF NONCOMPLIANCE WITH APPLICABLE LAWS AND REGULATIONS.
AS A RESULT OF NONCOMPLIANCE WITH APPLICABLE LAWS AND REGULATIONS.
AS A RESULT OF NONCOMPLIANCE WITH APPLICABLE LAWS AND REGULATIONS.
AS A RESULT OF NONCOMPLIANCE WITH APPLICABLE LAWS AND REGULATIONS.
2017-05-16
Rev.3.0
©2016 Toshiba Corporation
