Ejector Style Header Series 8289 Available in industry standard sizes of 10-64 positions, they mate to AVX Series 8290 IDC sockets, as well as other industry compatible connectors. Solder or press-fit contacts are available in either straight or right angle formats. The four wall design and optional molded in polarizing keys ensure positive polarization without pin loss. Latch/eject levers can also be specified to suit the mating Series 8290 socket, either with or without strain relief. Stand-off are incorporated to facilitate flux washing and de-gassing. TECHNICAL SPECIFICATION Material: Molding - UL94VO rated glass filled grey polyester Contact - Phosphor bronze Contact Plating: Selective gold over nickel plating on the mating face, pure tin in IDC section Current Rating: 1 ampere at 70C maximum ambient Insulation Resistance: >1000 megohms Voltage Rating: 350V DC or AC peak Operating Temperature: -55C to +125C Contact Resistance: Initially 10 milliohms maximum UL File No. E90723 CSA File No. 1255749 Dielectric Withstanding Voltage: 1050 DC or AC peak Latch/Eject Levers Part Numbers when ordered separately. Long (For 8290 socket with strain relief) 60 8289 6301 00 000 Short (For 8290 socket without strain relief) 60 8289 6302 00 000 ORDERING CODE 00 8289 050 Connector Code Prefix 00 = Standard Series Number Number of Contacts 010 = 10 position 014 = 14 position 016 = 16 position 020 = 20 position 026 = 26 position 034 = 34 position 040 = 40 position 050 = 50 position 060 = 60 position 064 = 64 position 10 002 1 Latch/Eject Lever Contact Termination 002 = Straight PC Tail for 2.4mm PCB 0.142" (3.60mm) 004 = Right Angle PC Tail for 2.4mm PCB - 0.142" (3.60mm) 006 = Straight PC Tail for 1.6mm PCB 0.110" (2.80mm) 007 = Right Angle PCB Tail for 1.6mm PCB - 0.110" (2.80mm) 009 = Press-Fit PC Tail 2.4/3.2mm PCB 0.209" (4.5mm) 0 = No Latch/Eject Lever 1 = Latch/Eject Lever for use with Series 8290 with strain relief 2 = Latch/Eject Lever for use with Series 8290 without strain relief 1 1 Polarization 1 = Type A BS9525 & BT224 Dual Height molding in polarizing key/keys 3 = No Polarizing key/keys Standard Plating 1 = Selective Plating 30" Gold over Nickel 4 = Selective Plating 10" Gold over Nickel Ejector Style Header Series 8289 DIMENSIONS: millimeters (inches) No. of Ways A B C D 10 10.16 (.040) 21.84 (.860) 27.94 (1.10) 32.11 (1.26) 14 15.24 (.060) 26.92 (1.06) 33.02 (1.30) 37.19 (1.46) 16 17.78 (.070) 29.46 (1.16) 35.56 (1.40) 39.73 (1.56) 20 22.86 (.090) 34.54 (1.36) 40.64 (1.60) 44.81 (1.76) 26 30.48 (1.20) 42.16 (1.66) 40.64 (1.90) 52.43 (2.06) 34 40.64 (1.60) 52.32 (2.06) 58.42 (2.30) 62.59 (2.46) 40 48.26 (1.90) 59.94 (2.36) 66.04 (2.60) 70.21 (2.76) 50 60.96 (2.40) 72.64 (2.86) 78.74 (3.10) 82.91 (3.26) 60 73.66 (2.90) 85.34 (3.36) 91.44 (3.60) 95.61 (3.76) 64 78.74 (3.10) 90.42 (3.56) 96.52 (3.80) 100.69 (3.96) 11