SFH9500 - OSRAM Opto Semiconductors

SFH 9500

Gabellichtschranke

Slotted Interrupter

Lead (Pb) Free Product - RoHS Compliant

Vorläufige Daten/ Preliminary Data

2011-07-12 1

Wesentliche Merkmale

• Geeignet für Oberflächenmontage (SMT)

• Kompaktes Gehäuse aus schwarzem LCP

• GaAs-IR-Sendediode (940 nm)

• Si-Fototransistor mit Tageslichtsperrfilter

• Mit Positionspin

• Geeignet für „pick and place“ Montage

• Hohe Genauigkeit (Schlitzbreite 0,5 mm)

• Große Spaltbreite zwischen Sender und

Empfänger (5 mm)

• Hohe Stabilität auf PCB durch große

Bauelementabmessung (6,8 mm)

Anwendungen

• Geschwindigkeitsüberwachung

• Motorsteuerung

• Überwachung des Papiervorschubs in

Druckern, Kopier- und Faxgeräten

• Speicherlaufwerke

• Steuerung des Druckkopfes in Druckern

• Münzdetektion

• Optoelektronische Schalter

Typ

Type

Bestellnummer

Ordering Code

ICE min. [mA]

(IF = 20 mA; VCE = 5 V)

SFH 9500 Q65110A3108 1

Features

• Suitable for surface mounting (SMT)

• Compact housing out of black LCP

• GaAs infrared emitter (940 nm)

• Silicon phototransistor detector with

daylight-cutoff filter

• With positioning pin

• Suitable for pick and place

• High sensing accuracy (slit width: 0.5 mm)

• Wide gap between emitter and detector (5 mm)

• High stability on pcb due to large width of

device (6.8 mm)

Applications

• Speed control

• Motor control

• Monitoring of paper feed in printers, copiers,

facsimiles

• Disk drives

• Control of print head in printers

• Coin detection

• Optoelectronic switches

2011-07-12 2

SFH 9500

Grenzwerte

Maximum Ratings

Bezeichnung

Parameter

Symbol

Wert

Value

Einheit

Unit

Sender (GaAs-Diode)

Emitter (GaAs Diode)

Sperrspannung

Reverse voltage

VR5 V

Durchlaßstrom , TA ≤ 25 °C

Forward current

IF (DC) 60 mA

Verlustleistung, TA ≤ 25 °C

Power dissipation

Ptot 100 mW

Wärmewiderstand

Thermal resistance

RthJA 280 K/W

Empfänger (Si-Fototransistor)

Detector (Silicon Phototransistor)

Kollektor-Emitter-Spannung

Collector-emitter voltage

VCE 30 V

Kollektor-Emitter-Spannung, (t ≤ 2 min)

Collector-emitter voltage

VCE 70

Emitter-Kollektor-Spannung

Emitter-collector voltage

VEC 7

Kollektorstrom

Collector current, TA ≤ 25 °C

IC50 mA

Verlustleistung, TA ≤ 25 °C

Total power dissipation

Ptot 150 mW

Wärmewiderstand

Thermal resistance

RthJA 280 K/W

SFH 9500

2011-07-12 3

Gabellichtschranke

Slotted Interrupter

Lagertemperatur

Storage temperature range

Tstg – 40 … + 85 °C

Betriebstemperatur

Operating temperature range

Top – 40 … + 85

Elektrostatische Entladung

Electrostatic discharge

ESD 2kV

Grenzwerte

Maximum Ratings

Bezeichnung

Parameter

Symbol

Wert

Value

Einheit

Unit

2011-07-12 4

SFH 9500

Kennwerte TA = 25 °C

Characteristics

Bezeichnung

Parameter

Symbol

Wert

Value

Einheit

Unit

Sender (GaAs-Diode)

Emitter (GaAs Diode)

Wellenlänge der Strahlung

Wavelength of peak emission

λpeak 940 nm

Durchlaβspannung

Forward voltage

IF = 20 m, tp = 20 ms

VF1.2 (≤ 1.4) V

Sperrstrom

Reverse current

VR = 5 V

IR0.01 (≤ 1) μA

Kapazität

Capacitance

VR = 0 V, f = 1 MHz

C016 pF

Empfänger (Si-Fototransistor)

Detector (Silicon Phototransistor)

Wellenlänge der max. Fotoempfindlichkeit

Wavelength of max. sensitivity

λS max 920 nm

Spectr. Bereich der Fotoempfindlichkeit

Spectral range of sensitivity

S = 10% of Smax

λ840 … 1080 nm

Kapazität

Capacitance

VCE = 0 V, f = 1 MHz, E = 0

CCE 6.5 pF

Dunkelstrom, VCE = 20 V

Dark current

ICEO 2 (≤ 50) nA

SFH 9500

2011-07-12 5

Gabellichtschranke

Slotted interrupter

Kollektor-Emitterstrom

Collector-emitter current

IF = 20 mA; VCE = 5 V

ICEmin 1mA

Kollektor-Emitter-Sättigungsspannung

Collector-emitter-saturation voltage

IF = 20 mA; IC = 0.3 mA

VCE sat ≤ 0.4 V

Anstiegs- und Abfallzeit

Rise and fall time

VCC = 5 V, IC = 1 mA, RL = 1 kΩ

μs

Kennwerte TA = 25 °C (cont’d)

Characteristics

Bezeichnung

Parameter

Symbol

Wert

Value

Einheit

Unit

SFH 9500

2011-07-12 6

Forward Current IF = f (VF)

Single pulse, tp = 20 μs

Total Power Dissipation for

Emitter and Detector Ptot = f (TA)

OHF00367

-2

12340.5 1.5 2.5 V

-1

OHF00410

tot

002040

60 80 100˚C

100

120

140

160 Detector

Emitter

Max. Permissible Forward Current

IF = f (TA)

OHF00372

20 40 60 80 120

thJA

= 280 K/W

Dark Current ICEO = f (TA)

VCE = 20 V, E = 0

OHF00380

CEO

-1

20 40 60 80 100˚C

SFH 9500

2011-07-12 7

Maßzeichnung

Package Outlines

Maße in mm (inch) / Dimensions in mm (inch).

General Tolerance: +/-0.1mm

2011-07-12 8

SFH 9500

Empfohlenes Lötpaddesign Reflow Löten

Recommended Solder Pad Reflow Soldering

Maße in mm (inch) / Dimensions in mm (inch).

Löthinweise

Soldering Conditions

Bauform

Type

Reflowlötung

Reflow Soldering

Tauch-, Schwalllötung

Dip, Wave Soldering

Peak Temp. of Soldering

Zone

Max. Time in Peak Zone

SFH 9500 260 °C10 s … 30 s –

OHFY1950

4.1 (0.161)

1.6 (0.063)

0.9 (0.035)

1.95 (0.077)

8.8 (0.346)

6.1 (0.240)

2.54 (0.100)

(7.4 (0.291)) Component Location on Pad

Bauteil positioniert

Cu-area > 16 mm

Cu-Fläche > 16 mm2

Solder resist

Lötstopplack

Padgeometrie für

improved heat dissipation

verbesserte Wärmeableitung

Paddesign for ES

SFH 9500

2011-07-12 9

Lötbedingungen

Soldering Conditions

Reflow Lötprofil für bleifreies Löten (nach J-STD-020C)

Reflow Soldering Profile for lead free soldering (acc. to J-STD-020C)

Published by

OSRAM Opto Semiconductors GmbH

Leibnizetraße 4, D-93055 Regensburg

www.osram-os.com

The information describes the type of component and shall not be considered as assured characteristics.

Terms of delivery and rights to change design reserved. Due to technical requirements components may contain

dangerous substances. For information on the types in question please contact our Sales Organization.

Packing

Please use the recycling operators known to you. We can also help you – get in touch with your nearest sales office.

By agreement we will take packing material back, if it is sorted. You must bear the costs of transport. For packing

material that is returned to us unsorted or which we are not obliged to accept, we shall have to invoice you for any costs

incurred.

Components used in life-support devices or systems must be expressly authorized for such purpose! Critical

components 1 , may only be used in life-support devices or systems 2 with the express written approval of OSRAM OS.

1 A critical component is a component usedin a life-support device or system whose failure can reasonably be expected

to cause the failure of that life-support device or system, or to affect its safety or effectiveness of that device or system.

2 Life support devices or systems are intended (a) to be implanted in the human body, or (b) to support and/or maintain

and sustain human life. If they fail, it is reasonable to assume that the health of the user may be endangered.

OHLA0687

˚C

120 s max

100

150

200

250

300

Ramp Up

100 s max

50 100 150 200 250 300

Ramp Down

6 K/s (max)

3 K/s (max)

25 ˚C

30 s max

260 ˚C

+0 ˚C

-5 ˚C

245 ˚C

±5 ˚C

240 ˚C

255 ˚C

217 ˚C

Maximum Solder Profile

Recommended Solder Profile

235 ˚C

-0 ˚C

+5 ˚C

Minimum Solder Profile

10 s min