GBJ2506 - LITE-ON ELECTRONICS - Datasheet.Directory

ZTX651

Document number: DS33283 Rev. 3 - 2 1 of 7

www.diodes.com May 2013

ZTX651

A Product Line of

Diodes Incorporate d

60V NPN MEDIUM POWER TRANSISTOR IN E-LINE

Features

• BVCEO > 60V

• IC = 2A High Continuous Collector Current

• ICM = 6A Peak Pulse Current

• TJ up to +200°C for High Temperature Operation

• Low Saturation Voltage < 300mV @ 1A

• PD = 1W Power dissipation

• Totally Lead-Free & Fully RoHS compliant (Notes 1 & 2)

• Halogen and Antimon y Free. “Green” Device (Note 3)

• Qualified to AEC-Q101 Standards for High Reliability

• PP AP Capable (Note 4)

Mechanical Data

• Case: E-Line (T O-92 Compatibl e)

• Case Material: molded plasti c, “Green” Molding Com pound

• UL Flammabilit y Classification Rating 94V-0

• Terminals: Finish – Matte Tin Plated Leads, Solderabl e per

MIL-STD-202, Method 208

• Weight: 0.159 grams (approximate)

Ordering Information (Notes 4 & 5)

Part Number

Compliance

Marking

Case

Leads

Quantity

ZTX651 AEC-Q101 ZTX651 E-Line Straight 4,000 loose in a Box

ZTX651Q Automotive ZTX651 E-Line Straight 4,000 loose in a Box

ZTX651STZ AEC-Q101 ZTX651 E-Line Joggled 2,000 taped per Ammo Box

ZTX651QSTZ

Automotive

ZTX651

E-Line

Joggled

2,000 taped per Ammo Box

Notes: 1. No purposely added lead. Fully EU Direct iv e 2002/95/E C (RoHS) & 2011/65/E U (RoH S 2) complia nt.

2. See http://www.diodes.com/quality/lead_free.html for more information about Diodes Incorporated’s definitions of Halogen- and Antimony-free, "Green"

and Lead -free.

3. Halogen- and Antimony-free "Green” products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total Br + Cl) and

<1000ppm antimony compounds.

4. Automotive products are AEC-Q101 qualified and are PPAP capable. Automotive, AEC-Q101 and standard products are electrically and thermally the

same, except where specified. For more information, please refer to http://www.diodes.com/quality/product_compliance_definitions/.

5. For packaging details, go to our website at http://www.diodes.com/products/packages.html.

Marking Information

Flat Face View

Device Symbol

Pin-Out Configuration

ZTX651 = Product type Marking Code

E-Line

(TO-92 Compatible)

ZTX

651

Rounded Face View

Ejection Mark

on Flat Face

Bottom View

C E

B C E

Part Mark on

Rounded Face

ZTX651

Document number: DS33283 Rev. 3 - 2 2 of 7

www.diodes.com May 2013

ZTX651

A Product Line of

Diodes Incorporate d

Maximum Ratings (@TA = +25°C, unless otherwise specified. )

Characteristic

Symbol

Value

Unit

Collector-Base Voltage VCBO 80 V

Collector-Emitter Voltage VCEO 60 V

Emitter-Base Voltage V

EBO

7 V

Continuous Coll ect or Current I

2 A

Peak Pulse Current I

6 A

Thermal Characteristics (@TA = +25°C, unless otherwise specified.)

Characteristic

Symbol

Value

Unit

Power Dissipation (Note 6) P

1.5 W

Power Dissipation (Note 7) P

1 W

Thermal Resistanc e Juncti on to Ambient (Note 6) R

ΘJA

116 °C/W

Thermal Resistanc e Juncti on to Ambient (Note 7) R

ΘJA

175 °C/W

Thermal Resistanc e Juncti on to Lead (Note 8) R

ΘJL

70 °C/W

Operating and Storage Tem perature Range TJ, TSTG -55 to +200 °C

ESD Rating s (Note 9)

Characteristic Symbol Value Unit JEDEC Cl ass

Electrostat ic Discharge - Human Body Model ESD HBM  4,000 V 3A

Electrostat ic Discharge - Machine Model ESD MM  400 V C

Notes: 6. For a through-hole device mounted at the seating plane (2.5mm lead length) with the collector lead on 25mm x 25mm 1oz copper

that is on a single-sided FR4 PCB; device is measured under still air conditions whilst operating in a steady-state.

7. Same as note (5), except the device is mounted on minimum recommended pad layout with 12mm lead length from the bottom of package to the board.

8. Thermal resistance from junction to solder-point at the seating plane (2.5mm from the bottom of package along the collector lead).

9. Refer to JEDEC specification JESD22-A114 and JESD22-A115.

ZTX651

Document number: DS33283 Rev. 3 - 2 3 of 7

www.diodes.com May 2013

ZTX651

A Product Line of

Diodes Incorporate d

Thermal Characteristics and Derating Information

ZTX651

Document number: DS33283 Rev. 3 - 2 4 of 7

www.diodes.com May 2013

ZTX651

A Product Line of

Diodes Incorporate d

Electrical Characteristics (@TA = +25°C, unless otherwise specifi ed.)

Characteristic Symbol Min Typ Max Unit Test Condition

Collector-Base Breakdown Voltage BVCBO 80 — — V IC = 100µA

Collector-Emitter Breakdown Voltage (Note 10) BVCEO 60 — — V IC = 10mA

Emitter-Base Breakdown Voltage BVEBO 7 — — V IE = 100µA

Collector Cut-off Current ICBO — — 0.1

10 µA

µA VCB = 60V

= 60V,T

amb

= 100°C

Emitter Cut-off Current

IEBO

— — 0.1 µA

VEB = 6V

Collector-Emitter Saturation Voltage (Note 10) VCE(sat) — 120

230 300

500 mV IC = 1A, IB = 100mA

IC =2A, IB = 200mA

Base-Emitter Saturation Voltage (Note 10) V

BE(sat)

— 0.9 1.25 V I

=1A, I

= 100mA

Base-Emitt er T urn-On Voltage (Note 10) V

BE(on)

— 0.8 1 V I

= 1A, V

= 2V

DC Current Gain (Note 10) hFE

100

200

170

—

300

—

— —

IC = 50mA, VCE = 2V

IC = 500mA, VCE = 2V

IC = 1A, VCE = 2V

= 2A, V

= 2V

Current Gain-Bandwidth Product (Note 10) fT 140 175 — MHz VCE = 5V, IC = 100mA

f = 100MHz

Output Capacitance (Note 10) Cobo — — 30 pF VCB = 10V. f = 1MHz

Turn-On Times ton — 45 — ns IC = 500mA, IB1 = IB2 = 5 0mA,

VCC = 10V

Turn-Off Times toff — 800 — ns

Notes: 10. Measured und er pul s ed co ndi ti ons. Pulse wi dth ≤ 300 µs. Duty cycle ≤2%

ZTX651

Document number: DS33283 Rev. 3 - 2 5 of 7

www.diodes.com May 2013

ZTX651

A Product Line of

Diodes Incorporate d

Typical Electrical Characteristics (@TA = +25°C, unless otherwise specified.)

ZTX651

Document number: DS33283 Rev. 3 - 2 6 of 7

www.diodes.com May 2013

ZTX651

A Product Line of

Diodes Incorporate d

Package Ou t lin e Dim en sio ns

Please see AP02002 at http://www.diodes.c om/datasheets/ap02002.pdf for latest version.

E-Line

Dim

Min

Max

Typ

A 2.16 2.41 −

b 0.41 0.495 −

b1 0.41 0.495 −

D 4.37 4.77 −

E 3.61 4.01

−

e − − 1.27

e2 − − 2.54

−

2.50

−

L 13.00 13.97 −

L1 2.50 3.50 −

All Dimensions in mm

b1 R 1.14 ( .045)

TAPED PRODUCT

e2 e2

e e

Ejection

Mark

LOOSE PRODUCT

Seating

Plane

ZTX651

Document number: DS33283 Rev. 3 - 2 7 of 7

www.diodes.com May 2013

ZTX651

A Product Line of

Diodes Incorporate d

IMPORTANT NOTICE

DIODES INCORPORATED MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARDS TO THIS DOCUMENT,

INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE

(AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION).

Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes

without further notice to this document and any product described herein. Diodes Incorporated does not assume any liability arising out of the

application or use of this document or any product described herein; neither does Diodes Incorporated convey any license under its patent or

trademark rights, nor the rights of others. Any Custom er or user of this document or products described herein in s uch applications shall assume

all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on Diodes Incorporated

website, harml ess against all damages.

Diodes Incorporated does not warrant or accept any li ability whatsoever in respect of any products purchased through unauthorized sales channel.

Should Cust omers purchase or use Diodes Inc orporated products f or any unintended or unauthorized applicat ion, Customers shall i ndemnify and

hold Diodes Incorporated and its representatives harmless against all claims, damages, expenses, and attorney fees arising out of, directly or

indirect l y, any claim of personal injury or death associated wit h such unintended or unauthori zed appli cat i on.

Products desc ribed herein may be covered by one or more Unit ed States, internati onal or foreign patents pending. Product nam es and markings

noted herein may also be covered by one or more United States, international or f orei gn trademarks.

This document is written i n English but may be translated int o multiple languages for reference. Only the English version of this document is the

final and determinative f orm at released by Diodes I ncorporat ed.

LIFE SU PPORT

Diodes Inc orporated products are s pecifically not authorized for use as critic al components in lif e support devices or systems without the e xpress

written approval of the Chief Executive Off icer of Diodes I ncorporated. As used herein:

A. Life support devices or systems are devices or syst ems which:

1. are intended to implant into the body, or

2. support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided in the

labeling can be reasonably expected to result in significant injury to the user.

B. A critical component is any component in a life support device or system whose failure to perform can be reasonably expected to cause the

failure of the life support device or to affect its safety or effectiveness.

Customers represent that they have all necessary expertise i n the safety and regulatory ramif ications of their l ife support devices or systems, and

acknowledge and agree t hat they are solel y res ponsible for all l egal , regulatory and safet y-relat ed requirements concerning their products and any

use of Diodes Incorporated products in such safety-critical, life support devices or systems, notwithstanding any devices- or systems-related

information or support that may be provided by Diodes Incorporated. Further, Customers must fully indemnify Diodes Incorporated and its

representati ves against any damages arisi ng out of the use of Diodes Incorporated products i n such safety -c ri tical, life support devices or systems.