10TTS08SPbF High Voltage Series Vishay High Power Products Surface Mountable Phase Control SCR, 10 A DESCRIPTION/FEATURES 2 Anode The 10TTS08SPbF High Voltage Series of silicon controlled rectifiers are specifically designed for medium power switching and phase control applications. The glass passivation technology used has reliable operation up to 125 C junction temperature. 3 Gate Typical applications are in input rectification (soft start) and these products are designed to be used with Vishay HPP input diodes, switches and output rectifiers which are available in identical package outlines. VT at 6.5 A < 1.15 V ITSM 140 A This product has been designed and qualified for industrial level. VRRM 800 V Compliant to RoHS directive 2002/95/EC. D2PAK 1 Cathode PRODUCT SUMMARY Halogen-free according to IEC 61249-2-21 definition. OUTPUT CURRENT IN TYPICAL APPLICATIONS APPLICATIONS SINGLE-PHASE BRIDGE THREE-PHASE BRIDGE NEMA FR-4 or G-10 glass fabric-based epoxy with 4 oz. (140 m) copper 2.5 3.5 Aluminum IMS, RthCA = 15 C/W 6.3 9.5 Aluminum IMS with heatsink, RthCA = 5 C/W 14.0 18.5 UNITS A Note * TA = 55 C, TJ = 125 C, footprint 300 mm2 MAJOR RATINGS AND CHARACTERISTICS PARAMETER IT(AV) TEST CONDITIONS Sinusoidal waveform VALUES UNITS 6.5 A IRMS 10 VRRM/VDRM 800 V ITSM 140 A 1.15 V dV/dt 150 V/s dI/dt 100 A/s - 40 to 125 C VRRM, MAXIMUM PEAK REVERSE VOLTAGE V VDRM, MAXIMUM PEAK DIRECT VOLTAGE V IRRM/IDRM AT 125 C mA 800 800 1.0 VT TJ 6.5 A, TJ = 25 C Range VOLTAGE RATINGS PART NUMBER 10TTS08SPbF Document Number: 94562 Revision: 17-Sep-09 For technical questions, contact: diodestech@vishay.com www.vishay.com 1 10TTS08SPbF High Voltage Series Surface Mountable Phase Control SCR, 10 A Vishay High Power Products ABSOLUTE MAXIMUM RATINGS PARAMETER SYMBOL Maximum average on-state current IT(AV) Maximum RMS on-state current IT(RMS) Maximum peak, one-cycle, non-repetitive surge current ITSM TEST CONDITIONS TC = 112 C, 180 conduction half sine wave VALUES UNITS 6.5 10 10 ms sine pulse, rated VRRM applied, TJ = 125 C 120 10 ms sine pulse, no voltage reapplied, TJ = 125 C 140 10 ms sine pulse, rated VRRM applied, TJ = 125 C 72 10 ms sine pulse, no voltage reapplied, TJ = 125 C 100 A Maximum I2t for fusing I2 t Maximum I2t for fusing I2t t = 0.1 ms to 10 ms, no voltage reapplied, TJ = 125 C 1000 A2s Maximum on-state voltage drop VTM 6.5 A, TJ = 25 C 1.15 V 17.3 m 0.85 V On-state slope resistance rt Threshold voltage VT(TO) Maximum reverse and direct leakage current IRM/IDM TJ = 125 C TJ = 25 C TJ = 125 C VR = Rated VRRM/VDRM 0.05 1.0 Typical holding current IH Anode supply = 6 V, resistive load, initial IT = 1 A 30 Maximum latching current IL Anode supply = 6 V, resistive load 50 Maximum rate of rise of off-state voltage dV/dt Maximum rate of rise of turned-on current dI/dt TJ = 25 C A2s mA 150 V/s 100 A/s VALUES UNITS TRIGGERING PARAMETER TEST CONDITIONS SYMBOL PGM 8.0 PG(AV) 2.0 Maximum peak positive gate current +IGM 1.5 A Maximum peak negative gate voltage -VGM 10 V Maximum peak gate power Maximum average gate power Anode supply = 6 V, resistive load, TJ = - 65 C Maximum required DC gate current to trigger Maximum required DC gate voltage to trigger IGT VGT Maximum DC gate voltage not to trigger VGD Maximum DC gate current not to trigger IGD 20 Anode supply = 6 V, resistive load, TJ = 25 C 15 Anode supply = 6 V, resistive load, TJ = 125 C 10 Anode supply = 6 V, resistive load, TJ = - 65 C 1.2 Anode supply = 6 V, resistive load, TJ = 25 C 1 Anode supply = 6 V, resistive load, TJ = 125 C 0.7 TJ = 125 C, VDRM = Rated value W mA V 0.2 0.1 mA VALUES UNITS SWITCHING PARAMETER SYMBOL Typical turn-on time tgt Typical reverse recovery time trr Typical turn-off time tq www.vishay.com 2 TEST CONDITIONS TJ = 25 C TJ = 125 C For technical questions, contact: diodestech@vishay.com 0.8 3 s 100 Document Number: 94562 Revision: 17-Sep-09 10TTS08SPbF High Voltage Series Surface Mountable Vishay High Power Products Phase Control SCR, 10 A THERMAL - MECHANICAL SPECIFICATIONS PARAMETER Maximum junction and storage temperature range Soldering temperature Maximum thermal resistance, junction to case Typical thermal resistance, junction to ambient (PCB mount) SYMBOL TEST CONDITIONS TJ, TStg TS RthJC UNITS - 40 to 125 For 10 s (1.6 mm from case) 240 DC operation 1.5 C C/W RthJA (1) 40 Approximate weight Marking device VALUES Case style D2PAK (SMD-220) 2 g 0.07 oz. 10TTS08S Note (1) When mounted on 1" square (650 mm2) PCB of FR-4 or G-10 material 4 oz. (140 m) copper 40 C/W For recommended footprint and soldering techniques refer to application note #AN-994 Document Number: 94562 Revision: 17-Sep-09 For technical questions, contact: diodestech@vishay.com www.vishay.com 3 10TTS08SPbF High Voltage Series 10TTS08 R thJC (DC) = 1.5 K/W 120 Conduction Angle 115 30 60 90 110 120 180 105 0 1 2 3 4 5 6 7 DC 180 120 90 60 30 10 8 6 RMS Limit 4 Conduction Period 10TTS08 TJ = 125C 2 0 0 2 6 8 10 12 Average On-state Current (A) Fig. 4 - On-State Power Loss Characteristics 10TTS08 R thJC (DC) = 1.5 K/W 120 Conduction Period 115 30 60 110 90 120 180 DC 105 0 2 4 6 8 10 130 100 90 80 70 60 1 5 RMS Limit 3 Conduction Angle 2 10TTS08 TJ = 125C 1 0 0 1 2 3 4 5 10 100 6 Fig. 5 - Maximum Non-Repetitive Surge Current Peak Half Sine Wave On-state Current (A) 180 120 90 60 30 4 10TTS08 Number Of Equal Amplitude Half Cycle Current Pulses (N) 8 6 Initial TJ = 125C @ 60 Hz 0.0083 s @ 50 Hz 0.0100 s 110 12 Fig. 2 - Current Rating Characteristics 7 At Any Rated Load Condition And With Rated VRRM Applied Following Surge. 120 Average On-state Current (A) 7 150 140 130 120 110 Maximum Non Repetitive Surge Current Versus Pulse Train Duration. Control Of Conduction May Not Be Maintained. Initial TJ = 125C No Voltage Reapplied Rated VRRM Reapplied 100 90 80 70 60 10TTS08 50 0.01 Fig. 3 - On-State Power Loss Characteristics 0.1 1 Pulse Train Duration (s) Average On-state Current (A) www.vishay.com 4 4 Average On-state Current (A) 125 Maximum Average On-state Power Loss (W) 12 Fig. 1 - Current Rating Characteristics Peak Half Sine Wave On-state Current (A) Maximum Allowable Case Temperature (C) Maximum Allowable Case Temperature (C) 125 Maximum Average On-state Power Loss (W) Surface Mountable Phase Control SCR, 10 A Vishay High Power Products Fig. 6 - Maximum Non-Repetitive Surge Current For technical questions, contact: diodestech@vishay.com Document Number: 94562 Revision: 17-Sep-09 10TTS08SPbF High Voltage Series Surface Mountable Vishay High Power Products Phase Control SCR, 10 A Instantaneous On-state Current (A) 1000 10TTS08 100 TJ = 25C 10 TJ = 125C 1 0.5 1 1.5 2 2.5 3 3.5 Instantaneous On-state Voltage (V) Fig. 7 - On-State Voltage Drop Characteristics Transient Thermal Impedance Z thJC (C/W) 10 Steady State Value (DC Operation) 1 0.1 D = 0.50 D = 0.33 D = 0.25 D = 0.17 D = 0.08 Single Pulse 10TTS08 0.01 0.0001 0.001 0. 01 0.1 1 Square Wave Pulse Duration (s) Fig. 8 - Thermal Impedance ZthJC Characteristics Document Number: 94562 Revision: 17-Sep-09 For technical questions, contact: diodestech@vishay.com www.vishay.com 5 10TTS08SPbF High Voltage Series Surface Mountable Phase Control SCR, 10 A Vishay High Power Products ORDERING INFORMATION TABLE Device code 10 T T S 08 S 1 2 3 4 5 6 1 - Current rating, RMS value 2 - Circuit configuration: 3 - Package: TRL PbF 7 8 T = Single thyristor T = TO-220AC 4 - Type of silicon: S = Converter grade 5 - Voltage code x 100 = VRRM 6 - S = TO-220 D2PAK (SMD-220) version 7 - Tape and reel option: TRL = Left reel TRR = Right orientation reel 8 - None = Standard production PbF = Lead (Pb)-free LINKS TO RELATED DOCUMENTS Dimensions www.vishay.com/doc?95046 Part marking information www.vishay.com/doc?95054 Packaging information www.vishay.com/doc?95032 www.vishay.com 6 For technical questions, contact: diodestech@vishay.com Document Number: 94562 Revision: 17-Sep-09 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1