COAXIAL PIN DIODE SWITCH MLM 6510-500D Series SP5T REFLECTIVE SWITCH WITH TTL COMPATIBLE DRIVER 0.5 TO 18.0 GHz FEATURES Broad Frequency Ranges Miniature Outline So Removable Connectors Hermetically Sealed TTL Compatible DESCRIPTION The MLM 6510-500D Series of SP5T switches from M/A-COM Ltd offers high isolation and low insertion loss in a miniature outline. All the switches have an integral TTL compatible driver with fast switching or higher power handling options available as standard. Devices are supplied with removable SMA male or female connectors. Without connectors the devices may be integrated directly into microstrip circuits. SPECIFICATIONS @ +25c Max Max Max Max Max Frequency _ Insertion Min Transition Switching Peak cw Range Loss Max Isolation Time S Power Power Part (GHz) (dB) VSWR (dB) (ns) mis) (Ww) (W) Number 10 30 01 01 MLM6513-501D 9.5 - 2.0 18 14 65 50 250 10 0.5 MLM6513-502D 10 30 01 01 MLM6514-501D 2.0 - 6.0 22 16 65 50 250 10 0.5 MLM6514-502D 10 30 01 01 MLM6515-501D 6.0 - 12.0 29 18 65 50 250 1.0 05 MLM6515-502D 10 30 01 01 MLM6516-501D 12.0 - 18.0 33 2.0 60 50 250 10 05 MLM6516-502D 10 30 01 01 MLM6517-501D 6.0 - 18.0 33 2.0 60 50 250 1.0 05 MLM6517-502D 10 30 0.1 01 MLM6518-501D 0.5 - 18.0 33 2.0 60 50 350 10 05 MLM6518-502D M/A-COM Ltd, Humphrys Road, Dunstable, Bedfordshire, LU5 4SX United Kingdom. Europe: (44) 1344 869595 a North America: 800 366 2266 : Asia Pacific: (81) 3 3226 1671 252REF: DS38-1 MLM 6510-500D SERIES Typical Performance MLM6518-502D 2 0 2 z ' = g 6 8 a 16 4 = a 2 20 3 7 30 2 5 4 2 4 6 8 10 12 414 16 18 2 4 6 8 10 12 14 16 18 FREQUENCY (GHZ) FREQUENCY (GHZ) Outline Drawing Third Angle Projection All dimensions in mm 245 885 Tolerances X.X= = +0.Smm - aC PLACES X.XX = +0.2mm 4.10 & PLACES Standard Finish: Silver plate to 18 ove O17 THRU Def Stan 03/9 for 6 PLACES & PLACES OPTIONAL use with microstrip SMA FEMALE ry > SPACER or matt black paint 6 PLACES q - PLATE to DTD SSS5A | a 93 > Va BNR 6 Places | z i w wi tO a < (+ e Sz pBl_[ q wsw ay D oy} SG Ta 0 25 IXY fa Lh 3.8 LONG T 4.60 s U 30 4 PLACES 61 NOTES: 1) Ji is RF common, J2, J3, J4, J5, J6 are RF input/ouputs. 2) Power supplies required +SV @ 140mA maximum, -15V @ 50mA maximum. Other combinations available on request, please contact the factory for further details. 3) E2, E3, E4 are decoded TTL control inputs, truth table as below: E2 E3 E4 RF Port to J1 0 1 1 J2 1 0 1 J3 0 0 1 J4 1 1 0 J5 0 1 0 J6 1 1 1 None (All isolating) 4) TTL logic '0' is 0 to 0.8V, TTL logic ']' is 2.0 to 5.5V 5) Any combination of SMA male/female connectors is available. 6) Transition time is defined as 10% to 90% detected RF. Switching time is defined as 50% TTL to 90% detected RF 7) Case operating temperature -55C to +85C Storage temperature -55C to +125C This data sheet describes only a small selection of the PIN diode switches available from M/A-COM Ltd. An extensive library of devices backed by in-house design and engineering support is available to meet specialised customer requirements, please contact the factory for applications assistance. All specifications subject to change without notice. M/A-COM Ltd, Humphrys Road, Dunstable, Bedfordshire, LUS 4SX United Kingdom. Europe: (44) 1344 869595 a North America: 800 366 2266 . Asia Pacific: (81) 3 3226 1671 253