MODEL
PBA1500F-3R3
PBA1500F-5
PBA1500F-7R5
PBA1500F-12 PBA1500F-15 PBA1500F-24 PBA1500F-36 PBA1500F-48
MAX OUTPUT WATTAGE[W] 990 1500 1500 1500 1500 1680 1692 1680
DC OUTPUT
ACIN 100V
3.3V 300A 5V 300A 7.5V 200A 12V 125A 15V 100A 24V 65A 36V 42A 48V 32A
ACIN 200V
*3
3.3V 300A 5V 300A 7.5V 200A 12V 125A 15V 100A 24V 70(105)A 36V 47(70)A 48V 35A
SPECIFICATIONS
MODEL
PBA1500F-3R3
PBA1500F-5
PBA1500F-7R5
PBA1500F-12 PBA1500F-15 PBA1500F-24 PBA1500F-36 PBA1500F-48
INPUT
VOLTAGE[V] AC85 - 264 1for DC120 - 370
CURRENT[A]
ACIN 100V
15typ 19typ
ACIN 200V
8typ 10typ
FREQUENCY[Hz] 50/60 (47-63
)
EFFICIENCY[%]
ACIN 100V
72typ 77typ 81typ 81typ 83typ 84typ 84typ 84typ
ACIN 200V
75typ 81typ 83typ 84typ 86typ 87typ 87typ 87typ
POWER FACTOR
ACIN 100V
0.98typ (Io=100%)
ACIN 200V
0.95typ (Io=100%)
INRUSH CURRENT[A]
ACIN 100V
ACIN 200V
LEAKAGE CURRENT[mA] 0.9/1.5max (ACIN 100V/240V 60Hz,Io=100%,According to IEC60950-1)
OUTPUT
VOLTAGE[V] 3.3 5 7.5 12 15 24 36 48
CURRENT[A]
ACIN 100V
300 300 200 125 100 65 42 32
ACIN 200V
*3
300 300 200 125 100 70(105)47(70)35
LINE REGULATION[mV] 20max 20max 36max 48max 60max 96max 144max 192max
LOAD REGULATION[mV] 40max 40max 60max 100max 120max 150max 150max 300max
RIPPLE[mVp-p]
0to+50
C
*1
80max 80max 120max 120max 120max 120max 150max 150max
-20-0
C
*1
140max 140max 160max 160max 160max 160max 160max 400max
RIPPLE NOISE[mVp-p]
0to+50
C
*1
120max 120max 150max 150max 150max 150max 200max 200max
-20-0
C
*1
160max 160max 180max 180max 180max 180max 240max 500max
TEMPERATURE REGULATION[mV]
0to+50
C
*1
40max 50max 75max 120max 150max 240max 360max 480max
-20 to +50C
*1
60max 75max 120max 180max 180max 290max 440max 600max
DRIFT[mV]
*2
12max 20max 30max 48max 60max 96max 144max 192max
START-UP TIME[ms]
600typ(ACIN 100/200V,Io=100%)Start-up time is 500ms typ for less than 1minute of applying input again from turning off the input voltage.
HOLD-UP TIME[ms] 20typ (ACIN 100/200V,Io=100%)
OUTPUT VOLTAGE ADJUSTMENT RANGE[V]
2.64 - 3.96 3.96 - 6.00 5.25 - 8.25 8.25 - 13.20 10.50 - 16.50 16.50 - 26.40 25.20 - 39.60 38.40 - 56.00
OUTPUT VOLTAGE SETTING[V]
3.30 - 3.40 5.00 - 5.15 7.50 - 7.80 12.00 - 12.48 15.00 - 15.60 24.00 - 24.96 36.00 - 37.44 48.00 - 49.92
PROTECTION
CIRCUIT AND
OTHERS
OVERCURRENT PROTECTION Works over 105% of rated current or 101% of peak current and recovers automatically
OVERVOLTAGE PROTECTION[V]
*4
Vo+0.66 - 1.32
Vo+1.0 - 2.0 Vo+1.5 - 3.0 Vo+2.4 - 4.8 Vo+3.0 - 6.0 Vo+4.8 - 9.6 Vo+7.2 - 14.4 Vo+4.8 - 12.0
OPERATING INDICATION LED (Green)
REMOTE SENSING Provided
REMOTE ON/OFF Provided
ISOLATION
INPUT-OUTPUT-RC AC3,000V 1minute,Cutoff current = 25mA,DC500V 50MWmin (At Room Temperature)
INPUT-FG AC2,000V 1minute,Cutoff current = 25mA,DC500V 50MWmin (At Room Temperature)
OUTPUT-RC-AUX-FG AC500V 1minute,Cutoff current = 100mA,DC500V 50MWmin (At Room Temperature)
OUTPUT-RC-AUX AC100V 1minute,Cutoff current = 100mA,DC100V 50MWmin (At Room Temperature)
ENVIRONMENT
OPERATING TEMP.,HUMID.AND ALTITUDE
-20 to +71C,20 - 90%RH (Non condensing)3,000m (10,000feet)max
STORAGE TEMP.,HUMID.AND ALTITUDE
-20 to +75C,20 - 90%RH (Non condensing)3,000m (10,000feet)max
VIBRATION 19.6m/s2(2G), 10 - 55Hz,3minutes period,60minutes each along X,Y and Z axis
IMPACT 196.1m/s2(20G), 11ms,once each X,Y and Z axis
SAFETY AND
NOISE
REGULATIONS
AGENCY APPROVALS UL60950-1,C-UL(CSA60950-1), EN60950-1,EN50178 Complies with DEN-AN (At only AC input)
CONDUCTED NOISE
Complies with FCC Part15 classB,VCCI-B,CISPR22-B,EN55011-B,EN55022-B,additional noise filter required for meeting class B.
CE MARKING Low Voltage Directive,EMC Directive
HARMONIC ATTENUATOR Complies with IEC61000-3-2
OTHERS CASE SIZE/WEIGHT 178X61X268mm (without terminal block and screw)(
WXHXD)/3.4kg max
COOLING METHOD Forced cooling (internal fan)
20/40typ (Io=100%)(
Primary inrush current /Secondary inrush current)(
More than 10 sec. to re-start)
40/40typ (Io=100%)(
Primary inrush current /Secondary inrush current)(
More than 10 sec. to re-start)
*1Measured by 20MHz oscilloscope or Ripple-Noise meter(equivalent to KEISOKU-GIKEN : RM101).
Ripple and ripple noise is measured on measuring board with capacitor of 22mF within 150mm from the output terminal.
*2Drift is the change in DC output for an eight hour period after a half-hour warm-up at 25C.
*3() means peak current. Peak loading for 10s. And Duty 35% max, refer to Instruction manual in detail.
*4Overvoltage protection circuit to follow to output voltage setting.
*A sound may occur from power supply at pulse loading.
PBA1500F
Unit type
PBA 1500 F -5 -O
Ordering information
1Series name
2Output wattage
3Universal input
4Output voltage
5Optional
C :with Coating
G:Low leakage current
U :Operation stop voltage
is set at a lower value
F1
:With Long-Life fan
F3
:Reverse air exhaust
type
F4
:Low speed fan
R
12345
PBA
A-18
