TECHNICAL DATA SHEET 6 Lake Street, Lawrence, MA 01841 1-800-446-1158 / (978) 620-2600 / Fax: (978) 689-0803 Website: http: //www.microsemi.com Gort Road Business Park, Ennis, Co. Clare, Ireland Tel: +353 (0) 65 6840044 Fax: +353 (0) 65 6822298 N-CHANNEL MOSFET Qualified per MIL-PRF-19500/592 DEVICES LEVELS 2N7225 2N7225U JAN JANTX JANTXV ABSOLUTE MAXIMUM RATINGS (TC = +25C unless otherwise noted) Parameters / Test Conditions Symbol Value Unit Drain - Source Voltage VDS 200 Vdc Gate - Source Voltage Continuous Drain Current VGS 20 Vdc ID1 27.4 Adc ID2 17 Adc Ptl 150 (1) W Rds(on) 0.1 (2) Top, Tstg -55 to +150 C TC = +25C Continuous Drain Current TC = +100C Max. Power Dissipation TC = +25C Drain to Source On State Resistance Operating & Storage Temperature TO-254AA Note: (1) Derated Linearly by 1.2 W/C for TC > +25C (2) VGS = 10Vdc, ID = 17A ELECTRICAL CHARACTERISTICS (TA = +25C, unless otherwise noted) Parameters / Test Conditions Symbol Min. Drain-Source Breakdown Voltage VGS = 0V, ID = 1mAdc V(BR)DSS 200 Gate-Source Voltage (Threshold) VDS VGS, ID = 0.25mA VDS VGS, ID = 0.25mA, Tj = +125C VDS VGS, ID = 0.25mA, Tj = -55C VGS(th)1 VGS(th)2 VGS(th)3 2.0 1.0 Gate Current VGS = 20V, VDS = 0V VGS = 20V, VDS = 0V, Tj = +125C IGSS1 IGSS2 100 200 nAdc Drain Current VGS = 0V, VDS = 160V VGS = 0V, VDS = 160V, Tj = +125C IDSS1 IDSS2 25 0.25 Adc mAdc rDS(on)1 rDS(on)2 0.100 0.105 rDS(on)3 0.17 VSD 1.9 Vdc Static Drain-Source On-State Resistance VGS = 10V, ID = 17A pulsed VGS = 10V, ID = 27.4A pulsed Tj = +125C VGS = 10V, ID = 17A pulsed Diode Forward Voltage VGS = 0V, ID = 27.4A pulsed T4-LDS-0048 Rev. 2 (101154) Max. Unit Vdc 4.0 Vdc 5.0 U-PKG (U3) TO-276AB Page 1 of 4 TECHNICAL DATA SHEET 6 Lake Street, Lawrence, MA 01841 1-800-446-1158 / (978) 620-2600 / Fax: (978) 689-0803 Website: http: //www.microsemi.com Gort Road Business Park, Ennis, Co. Clare, Ireland Tel: +353 (0) 65 6840044 Fax: +353 (0) 65 6822298 DYNAMIC CHARACTERISTICS Parameters / Test Conditions Gate Charge: On-State Gate Charge Gate to Source Charge Gate to Drain Charge Symbol VGS = 10V, ID = 27.4A VDS = 50V Min. Qg(on) Qgs Qgd Max. 115 22 60 Unit nC SWITCHING CHARACTERISTICS Parameters / Test Conditions Switching time tests: Turn-on delay time Rinse time Turn-off delay time Fall time Diode Reverse Recovery Time T4-LDS-0048 Rev. 2 (101154) Symbol ID = 27.4A, VGS = 10Vdc, Gate drive impedance = 7.5, VDD = 100Vdc di/dt 100A/s, VDD 30V, IF = 27.4A Min. Max. td(on) tr td(off) tf 35 190 170 130 trr 950 Unit ns ns Page 2 of 4 TECHNICAL DATA SHEET 6 Lake Street, Lawrence, MA 01841 1-800-446-1158 / (978) 620-2600 / Fax: (978) 689-0803 Website: http: //www.microsemi.com Gort Road Business Park, Ennis, Co. Clare, Ireland Tel: +353 (0) 65 6840044 Fax: +353 (0) 65 6822298 PACKAGE DIMENSIONS Dimensions Ltr. BL Inches Min Max .535 .545 Millimeters Min Max 13.59 13.84 CH .249 .260 6.32 6.60 LD .035 .045 0.89 1.14 LL .510 .570 12.95 14.48 LO .150 BSC 3.81 BSC LS .150 BSC 3.81 BSC MHD .139 .149 3.53 3.78 MHO .665 .685 16.89 17.40 TL .790 .800 20.07 20.32 TT .040 .050 1.02 1.27 TW .535 .545 13.59 13.84 Term 1 Drain Term 2 Source Term 3 Gate Note 3, 4 3, 4 NOTES: 1. Dimensions are in inches. 2. Millimeters are given for general information only. 3. Glass meniscus included in dimension D and E. 4. All terminals are isolated from the case. 5. In accordance with ASME Y14.5M, diameters are equivalent to x symbology. FIGURE 1. Physical dimensions for TO-254AA T4-LDS-0048 Rev. 2 (101154) Page 3 of 4 TECHNICAL DATA SHEET 6 Lake Street, Lawrence, MA 01841 1-800-446-1158 / (978) 620-2600 / Fax: (978) 689-0803 Website: http: //www.microsemi.com Gort Road Business Park, Ennis, Co. Clare, Ireland Tel: +353 (0) 65 6840044 Fax: +353 (0) 65 6822298 PACKAGE DIMENSIONS Dimensions Ltr. BL Inches Min Max .620 .630 Millimeters Min Max 15.75 16.00 BW .445 11.30 CH .455 .142 11.56 3.60 LH .010 .020 0.26 0.50 LL1 .410 .420 10.41 10.67 LL2 .152 .162 3.86 4.11 LS1 .210 BSC 5.33 BSC LS2 .105 BSC 2.67 BSC LW1 .370 .380 9.40 9.65 LW2 .135 .145 3.43 3.68 Q1 .030 0.76 Q2 .035 0.89 Term 1 Drain Term 2 Source Term 3 Gate NOTES: 1. 2. 3. 4. Dimensions are in inches. Millimeters are given for information only. The lid shall be electrically isolated from the drain, gate and source. In accordance with ASME Y14.5M, diameters are equivalent to x symbology. FIGURE 2. Dimensions and configuration of surface mount package outline (TO-276AB) 2N7224U, 2N7225U, 2N7227U, and 2N7228U. T4-LDS-0048 Rev. 2 (101154) Page 4 of 4