18 TPC
HOW TO ORDER
ND06
Type
P0
Material Code
P
(See table page 19)
0103
Resistance
10 kΩ
K --
Tolerance
K (±10%)
NTC Disc Thermistors
General Purpose: ND 06
Professional: NV 06
These multi-purpose thermistors can be used for tempera-
ture control, compensation or measurement. This standard pr oduct is available in large quantities and with
a short delivery time.
GENERAL PURPOSE PROFESSIONAL
Types ND 06 NV 06
Finish Coated disc with phenolic resin Var nished disc
Approved by NFC 93 271
Standards Type: TN 115 A
List: GAM-T1
List: LNZ
DIMENSIONS: millimeters (inches)
Marking Nominal resistance Nominal resistance
Tolerance for ±5%, ±10% Tolerance
Climatic category – 55/125/56 - 434
Operating temperature -55°C to +150°C -55°C to +150°C
Tolerance on Rn (25°C) ±5%, ±10%, ±20% ±2%, ±5%, ±10%
Maximum dissipation at 25°C 0.71 W 0.69 W
Thermal dissipation factor 7.1 mW/°C 6.9 mW/°C
Thermal time constant 22 s 18 s
35 (1.38) min
6 (.236) max 4 (.157) max
ø 0.6 (.024)
+10%
-0.05
5.08 (0.2) m
3 (.118) max
35 (1.38) min
6 (.236) max 3.5 (.138) max
ø 0.6 (.024)
+10%
-0.05
5.08 (0.2) m
3 (.118) max
mOn request = 2.54
19
TPC
Table of Values
ND 06 - NV 06
Types Rn at 25°C ( ) Material Code B (K) aat 25°C (%/°C)
(∆B/B )
N■06 F 0 0100 10 F 2800 (1) – 3.2
N■06 F 0 0150 15
N■06 G 0 0220 22 G 3030 (1) – 3.4
N■06 G 0 0330 33
N■06 H 0 0470 47 H 3160 (1) – 3.5
N■06 H 0 0680 68
N■06 I 0 0101 100 I 3250 (1) – 3.7
N■06 J 0 0151 150
N■06 J 0 0221 220 J 3480 (1) – 3.9
N■06 K 0 0331 330
N■06 K 0 0471 470 K 3630 (1) – 4.0
N■06 L 0 0681 680 L 3790 (2) – 4.2
N■06 L 0 0102 1,000
N■06 M 0 0152 1,500 M 3950 (2) – 4.4
N■06 N 0 0222 2,200
N■06 N 0 0332 3,300 N 4080 (2) – 4.6
N■06 P 0 0472 4,700
N■06 P 0 0682 6,800 P 4220 (2) – 4.7
N■06 P 0 0103 10,000
N■06 Q 0 0153 15,000 Q 4300 (2) – 4.7
N■06 Q 0 0223 22,000
N■06 R 0 0333 33,000 R 4400 (2) – 4.8
N■06 S 0 0473 47,000 S 4520 (2) – 5.0
N■06 S 0 0683 68,000
N■06 T 0 0104 100,000 T 4630 (2) – 5.1
N■06 U 0 0154 150,000
N■06 U 0 0224 220,000 U 4840 (2) – 5.3
N■06 U 0 0334 330,000
■= D for general purpose
■ = V for professional
Resistance - Temperature characteristics: pages 32 to 35.
(1) ± 5%
(2) ± 3%
