REVISIONS PART NO. ECN # REV DESCRIPTION DRAWN DATE CHECKD DATE APPRVD DATE - 1.0 RELEASED AB 25/03/15 ER 25/03/15 ER 25/03/15 DTRPGSB-1A Specification: Material : Nylon 66 Part Number Table Description Bushing, Open, PK50 Hole Diameter Panel Thickness Range "A" Max Holding Bundle Dia "B" "C" "D" Figure Part Number 9.5mm 0.8mm to 3.2mm 10.7mm 6.7mm 9.9mm 1.3mm 11.1mm 0.8mm to 3.2mm 12.7mm 7.9mm 10.3mm 1.6mm 25.4mm 0.8mm to 3.2mm 26.6mm 20.6mm 10.3mm 1.6mm 27.8mm 0.8mm to 3.2mm 29.4mm 22.2mm 10.3mm 1.6mm 31.8mm 0.8mm to 3.2mm 34.1mm 26.6mm 10.3mm 1.6mm 34.9mm 0.8mm to 3.2mm 37.3mm 29.7mm 10.3mm 1.6mm 38.1mm 0.8mm to 3.2mm 40.1mm 31.7mm 10.7mm 1.6mm DTRPGSB-8A 9.5mm 0.7mm to 1.7mm 11.4mm 6.6mm 6.5mm 1.3mm DTRPGSB-0609A 13mm 0.8mm to 3.5mm 14.9mm 9mm 10.5mm 1.5mm 16mm 1.2mm to 3.5mm 18mm 10.5mm 10.5mm 1.6mm 19mm 1.2mm to 3.3mm 20.6mm 14.5mm 11mm 1.3mm Important Notice : This data sheet and its contents (the "Information") belong to the members of the Premier Farnell group of companies (the "Group") or are licensed to it. No licence is granted for the use of it other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change without notice and replaces all data sheets previously supplied. The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use made of it. Users of this data sheet should check for themselves the Information and the suitability of the products for their purpose and not make any assumptions based on information included or omitted. Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the Group was aware of the possibility of such loss or damage arising) is excluded. This will not operate to limit or restrict the Group's liability for death or personal injury resulting from its negligence. DURATOOL is the registered trademark of the Group. (c) Premier Farnell plc 2012. TOLERANCES: DRAWN BY: AB UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE FOR REFERENCE PURPOSES ONLY. CHECKED BY: ER APPROVED BY: ER DATE: 25/03/15 DTRPGSB-4A DTRPGSB-5A 2 DTRPGSB-6A DTRPGSB-7A www.element14.com www.farnell.com www.newark.com www.cpc.co.uk www.mcmelectronics.com DTRPGSB-1013A 1 DTRPGSB-1316A DTRPGSB-1519A Open Bushing SIZE 25/03/15 A4 25/03/15 DTRPGSB-2A DRAWING TITLE: DATE: DATE: DTRPGSB-1A 1 DWG NO. ELECTRONIC FILE DTRPGSB-1A-01 SCALE: NTS U.O.M.: mm REV DTRPGSB-1A SHEET: 1 of 1 1.0