VS-MBRB20...CTGPbF, VS-MBR20...CTG-1PbF Series Vishay High Power Products Schottky Rectifier, 2 x 10 A VS-MBRB20...CTGPbF VS-MBR20...CTG-1PbF FEATURES * 150 C TJ operation * Center tap D2PAK and TO-262 packages * Low forward voltage drop * High purity, high temperature epoxy encapsulation for enhanced mechanical strength and moisture resistance Base common cathode 2 Base common cathode 2 * High frequency operation * Guard ring enhanced ruggedness and long term reliability 2 1 Common 3 Anode cathode Anode 2 1 Common 3 Anode cathode Anode D2PAK TO-262 * Meets MSL level 1, per J-STD-020, LF maximum peak of 260 C * Halogen-free according to IEC 61249-2-21 definition * Compliant to RoHS directive 2002/95/EC * AEC-Q101 qualified DESCRIPTION PRODUCT SUMMARY IF(AV) 2 x 10 A VR 80 V to 100 V This center tap Schottky rectifier has been optimized for low reverse leakage at high temperature. The proprietary barrier technology allows for reliable operation up to 150 C junction temperature. Typical applications are in switching power supplies, converters, freewheeling diodes, and reverse battery protection. MAJOR RATINGS AND CHARACTERISTICS SYMBOL IFRM CHARACTERISTICS VALUES UNITS 20 A 80 to 100 V TC = 133 C (per leg) VRRM IFSM tp = 5 s sine 850 A VF 10 Apk, TJ = 125 C 0.70 V TJ Range - 65 to 150 C VOLTAGE RATINGS PARAMETER Maximum DC reverse voltage Maximum working peak reverse voltage Document Number: 94517 Revision: 16-Mar-10 SYMBOL VS-MBRB2080CTGPbF VS-MBRB2090CTGPbF VS-MBRB20100CTGPbF VS-MBR2080CTG-1PbF VS-MBR2090CTG-1PbF VS-MBR20100CTG-1PbF UNITS VR 80 90 100 V VRWM For technical questions, contact: diodestech@vishay.com www.vishay.com 1 VS-MBRB20...CTGPbF, VS-MBR20...CTG-1PbF Series Vishay High Power Products Schottky Rectifier, 2 x 10 A ABSOLUTE MAXIMUM RATINGS PARAMETER Maximum average forward current SYMBOL per leg per device Peak repetitive forward current per leg Non-repetitive peak surge current TEST CONDITIONS VALUES IF(AV) TC = 133 C, rated VR IFRM Rated VR, square wave, 20 kHz TC = 133 C 20 5 s sine or 3 s rect. pulse 850 IFSM UNITS 10 20 Following any rated load condition and with rated VRRM applied Surge applied at rated load conditions half wave, single phase, 60 Hz 150 A Peak repetitive reverse surge current IRRM 2.0 s, 1.0 kHz 0.5 Non-repetitive avalanche energy per leg EAS TJ = 25 C, IAS = 2 A, L = 12 mH 24 mJ VALUES UNITS ELECTRICAL SPECIFICATIONS PARAMETER SYMBOL TEST CONDITIONS 10 A Maximum forward voltage drop VFM (1) TJ = 25 C 20 A 10 A TJ = 125 C 20 A Maximum instantaneous reverse current IRM (1) Threshold voltage VF(TO) TJ = 25 C VR = Rated VR TJ = 125 C TJ = TJ maximum Forward slope resistance rt Maximum junction capacitance CT VR = 5 VDC (test signal range 100 kHz to 1 MHz), 25 C LS Measured from top of terminal to mounting plane Typical series inductance Maximum voltage rate of change dV/dt Rated VR 0.80 0.95 0.70 V 0.85 0.10 6 mA 0.433 V 15.8 m 400 pF 8.0 nH 10 000 V/s VALUES UNITS Note (1) Pulse width < 300 s, duty cycle < 2 % THERMAL - MECHANICAL SPECIFICATIONS PARAMETER SYMBOL TEST CONDITIONS Maximum junction temperature range TJ - 65 to 150 Maximum storage temperature range TStg - 65 to 175 Maximum thermal resistance, junction to case per leg RthJC Maximum thermal resistance junction to ambient RthJA 2.0 DC operation minimum maximum C/W 50 Approximate weight Mounting torque C Non-lubricated threads 2 g 0.07 oz. 6 (5) kgf * cm 12 (10) (lbf * in) MBRB2080CTG Case style D2PAK MBRB2090CTG MBRB20100CTG Marking device MBR2080CTG-1 Case style TO-262 MBR2090CTG-1 MBR20100CTG-1 www.vishay.com 2 For technical questions, contact: diodestech@vishay.com Document Number: 94517 Revision: 16-Mar-10 VS-MBRB20...CTGPbF, VS-MBR20...CTG-1PbF Series 100 100 IR - Reverse Current (mA) IF - Instantaneous Forward Current (A) Schottky Rectifier, 2 x 10 A Vishay High Power Products TJ = 150 C TJ = 125 C TJ = 25 C 10 TJ = 150 C 10 1 TJ = 125 C TJ = 100 C 0.1 TJ = 75 C 0.01 TJ = 50 C 0.001 TJ = 25 C 1 0.2 0.0001 0.4 0.6 0.8 1.0 1.2 1.4 1.6 0 1.8 VFM - Forward Voltage Drop (V) 94517_01 20 40 60 80 100 VR - Reverse Voltage (V) 94517_02 Fig. 1 - Maximum Forward Voltage Drop Characteristics (Per Leg) Fig. 2 - Typical Values of Reverse Current vs. Reverse Voltage (Per Leg) CT - Junction Capacitance (pF) 1000 TJ = 25 C 100 10 0 20 40 60 80 100 VR - Reverse Voltage (V) 94517_03 ZthJC - Thermal Impedance (C/W) Fig. 3 - Typical Junction Capacitance vs. Reverse Voltage (Per Leg) 10 1 PDM D = 0.75 D = 0.50 D = 0.33 D = 0.25 D = 0.20 0.1 Single pulse (thermal resistance) 0.01 0.00001 94517_04 0.0001 0.001 0.01 t1 t2 Notes: 1. Duty factor D = t1/t2 2. Peak TJ = PDM x ZthJC + TC 0.1 1 10 t1 - Rectangular Pulse Duration (s) Fig. 4 - Maximum Thermal Impedance ZthJC Characteristics (Per Leg) Document Number: 94517 Revision: 16-Mar-10 For technical questions, contact: diodestech@vishay.com www.vishay.com 3 VS-MBRB20...CTGPbF, VS-MBR20...CTG-1PbF Series 150 10 RMS limit DC Average Power Loss (W) Allowable Case Temperature (C) Vishay High Power Products Schottky Rectifier, 2 x 10 A 140 130 120 Square wave (D = 0.50) Rated VR applied 110 8 D = 0.20 D = 0.25 D = 0.33 D = 0.50 D = 0.75 DC 6 4 2 See note (1) 100 0 0 94517_05 2 4 6 8 10 12 14 0 16 IF(AV) - Average Forward Current (A) 94517_06 IFSM - Non-Repetitive Surge Current (A) Fig. 5 - Maximum Allowable Case Temperature vs. Average Forward Current (Per Leg) 2 4 6 8 10 12 14 16 IF(AV) - Average Forward Current (A) Fig. 6 - Forward Power Loss Characteristics (Per Leg) 1000 At any rated load condition and with rated VRRM applied following surge 100 10 94517_07 100 1000 10 000 tp - Square Wave Pulse Duration (s) Fig. 7 - Maximum Non-Repetitive Surge Current (Per Leg) Note Formula used: TC = TJ - (Pd + PdREV) x RthJC; Pd = Forward power loss = IF(AV) x VFM at (IF(AV)/D) (see fig. 6); PdREV = Inverse power loss = VR1 x IR (1 - D); IR at VR1 = Rated VR (1) www.vishay.com 4 For technical questions, contact: diodestech@vishay.com Document Number: 94517 Revision: 16-Mar-10 VS-MBRB20...CTGPbF, VS-MBR20...CTG-1PbF Series Schottky Rectifier, 2 x 10 A Vishay High Power Products ORDERING INFORMATION TABLE Device code VS- MBR 2 1 B 20 100 CT G -1 TL PbF 3 4 5 6 7 8 9 10 - HPP product suffix 2 - Essential part number 3 - 1 B = D2PAK None = TO-262 4 - Current rating (20 = 20 A) 5 - Voltage ratings 6 - CT = Essential part number 7 - G = Schottky generation 8 - 9 - 80 = 80 V 90 = 90 V 100 = 100 V None = D2PAK -1 = TO-262 None = Tube (50 pieces) TL = Tape and reel (left oriented - for D2PAK only) TR = Tape and reel (right oriented - for D2PAK only) 10 - PbF = Lead (Pb)-free (for D2PAK tube) P = Lead (Pb)-free (for D2PAK TL/TR, and TO-262) LINKS TO RELATED DOCUMENTS Dimensions www.vishay.com/doc?95014 Part marking information www.vishay.com/doc?95008 Packaging information www.vishay.com/doc?95032 Document Number: 94517 Revision: 16-Mar-10 For technical questions, contact: diodestech@vishay.com www.vishay.com 5 Outline Dimensions Vishay High Power Products D2PAK, TO-262 DIMENSIONS FOR D2PAK in millimeters and inches Conforms to JEDEC outline D2PAK (SMD-220) (2)(3) E B Pad layout A A (E) c2 11.00 MIN. (0.43) A (3) L1 4 9.65 MIN. (0.38) (D1) (3) Detail A D H 1 2 17.90 (0.70) 15.00 (0.625) (2) 3 3.81 MIN. (0.15) L2 B B 2.32 MIN. (0.08) A 2 x b2 c 2.64 (0.103) 2.41 (0.096) (3) E1 C View A - A 2xb 0.004 M B 0.010 M A M B Plating 2x e Base Metal (4) b1, b3 H Gauge plane Seating plane Lead assignments Diodes 1. - Anode (two die)/open (one die) 2., 4. - Cathode 3. - Anode SYMBOL MILLIMETERS MIN. c1 (4) (c) B 0 to 8 MAX. L3 Lead tip A1 L (b, b2) L4 Section B - B and C - C Scale: None Detail "A" Rotated 90 CW Scale: 8:1 INCHES MIN. MAX. NOTES SYMBOL MILLIMETERS MIN. MAX. INCHES MIN. MAX. NOTES A 4.06 4.83 0.160 0.190 D1 6.86 8.00 0.270 0.315 3 A1 0.00 0.254 0.000 0.010 E 9.65 10.67 0.380 0.420 2, 3 E1 7.90 8.80 0.311 0.346 3 b 0.51 0.99 0.020 0.039 b1 0.51 0.89 0.020 0.035 b2 1.14 1.78 0.045 0.070 b3 1.14 1.73 0.045 0.068 c 0.38 0.74 0.015 0.029 c1 0.38 0.58 0.015 0.023 c2 1.14 1.65 0.045 0.065 D 8.51 9.65 0.335 0.380 4 2.54 BSC 0.100 BSC H 14.61 15.88 0.575 0.625 4 L 1.78 2.79 0.070 0.110 L1 - 1.65 - 0.066 4 L2 1.27 1.78 0.050 0.070 2 L4 L3 Notes (1) Dimensioning and tolerancing per ASME Y14.5 M-1994 (2) Dimension D and E do not include mold flash. Mold flash shall not exceed 0.127 mm (0.005") per side. These dimensions are measured at the outmost extremes of the plastic body (3) Thermal pad contour optional within dimension E, L1, D1 and E1 (4) Dimension b1 and c1 apply to base metal only (5) Datum A and B to be determined at datum plane H (6) Controlling dimension: inch Document Number: 95014 Revision: 31-Mar-09 e (7) 0.25 BSC 4.78 5.28 3 0.010 BSC 0.188 0.208 Outline conforms to JEDEC outline TO-263AB For technical questions concerning discrete products, contact: diodes-tech@vishay.com For technical questions concerning module products, contact: ind-modules@vishay.com www.vishay.com 1 Outline Dimensions D2PAK, TO-262 Vishay High Power Products DIMENSIONS FOR TO-262 in millimeters and inches Modified JEDEC outline TO-262 (Datum A) (2) (3) E A A c2 B E A (3) L1 Seating plane D 1 2 3 C L2 B D1 (3) B C L (2) A c 3 x b2 3xb E1 A1 (3) Section A - A 2xe Plating 0.010 M A M B (4) b1, b3 Base metal Lead assignments Diodes 1. - Anode (two die)/open (one die) 2., 4. - Cathode 3. - Anode Lead tip SYMBOL c1 c (4) (b, b2) Section B - B and C - C Scale: None MILLIMETERS INCHES MIN. MAX. MIN. MAX. A 4.06 4.83 0.160 0.190 A1 2.03 3.02 0.080 0.119 b 0.51 0.99 0.020 0.039 b1 0.51 0.89 0.020 0.035 b2 1.14 1.78 0.045 0.070 b3 1.14 1.73 0.045 0.068 c 0.38 0.74 0.015 0.029 c1 0.38 0.58 0.015 0.023 c2 1.14 1.65 0.045 0.065 NOTES 4 4 4 D 8.51 9.65 0.335 0.380 D1 6.86 8.00 0.270 0.315 3 E 9.65 10.67 0.380 0.420 2, 3 E1 7.90 8.80 0.311 0.346 3 e 2.54 BSC 0.100 BSC L 13.46 14.10 0.530 0.555 L1 - 1.65 - 0.065 L2 3.56 3.71 0.140 0.146 Notes (1) Dimensioning and tolerancing as per ASME Y14.5M-1994 (2) Dimension D and E do not include mold flash. Mold flash shall not exceed 0.127 mm (0.005") per side. These dimensions are measured at the outmost extremes of the plastic body (3) Thermal pad contour optional within dimension E, L1, D1 and E1 (4) Dimension b1 and c1 apply to base metal only (5) Controlling dimension: inches www.vishay.com 2 2 (6) 3 Outline conform to JEDEC TO-262 except A1 (maximum), b (minimum) and D1 (minimum) where dimensions derived the actual package outline For technical questions concerning discrete products, contact: diodes-tech@vishay.com For technical questions concerning module products, contact: ind-modules@vishay.com Document Number: 95014 Revision: 31-Mar-09 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Revision: 12-Mar-12 1 Document Number: 91000