Mini-Circuits - Specification for Voltage Controlled Oscillator - JTOS-EDR4679
Voltage Controlled Oscillator
Notes:
•For Surface Mount Environmental Specifications, please click here.
Re-flow soldering information is available in "Surface Mount" article.
•non-catalog model. Please consult factory for price and delivery.
•DATA SHOWS TYPICAL PERFORMANCE. PLEASE CONSULT FACTORY FOR GUARANTEED
SPECS FOR YOUR REQUIREMENT.
•General Quality Control Procedures and Environmental Specifications are given in Mini-Circuits
Guarantees Quality.
Hi-Rel, MIL description are given in Hi-Rel and MIL
•Prices and Specifications subjects to change without notice.
JTOS-EDR4679
Freq.
MHz
Power
Output
dBm
Tuning
Voltage
V
Phase Noise
dBc/Hz SSB at
offset
frequencies:
Typ.
Pulling
MHz
pk-pk
@ 12 dBr
Pushing
MHz/V
Tuning
Sensitivity
MHz/V
Harmonics
dBc
3dB
Modulation
Bandwidth
kHz
Power
Supply
Min. Max. Typ. Aux. Min. Max. 100
Hz 1
kHz 10
kHz 100
kHz 1
MHz Typ. Typ. Typ. Typ. Max. Typ. Voltage
V
Current
mA
Max
337 - 520.0 8.5 0.5 - 10.0 -81 -98 -119 -141 1.2 0.50 18.0 - 27.5 -32.0 -16.0 140.0 12 25
* applies to dual output VCO.
Pin Connections
Port RF OUT V-CC V-TUNE GND EXT
jc 13 2 5 1,3,4,6,7,8,9,10,11,12,14 Tuning Characteristics
MHz/V Power Output
dBm Harmonics Suppression
dBc
V-Tune Frequency
(MHz) Tuning
Sensitivity -55°C +25°C +85°C F2 F3 F4
0.5 311.80 39.00 7.98 7.40 6.09 -21.20 -53.30 -40.20
1.0 326.70 29.70 9.32 9.13 7.67 -22.90 -46.50 -44.40
1.5 339.90 26.50 10.06 10.00 8.24 -26.30 -44.00 -47.60
2.0 352.50 25.20 10.44 10.38 8.55 -30.00 -43.60 -47.50
2.5 364.40 23.70 10.60 10.48 8.77 -33.20 -43.00 -46.80
3.0 375.90 23.00 10.64 10.47 8.99 -35.90 -43.50 -47.30
3.5 387.20 22.70 10.55 10.40 9.11 -38.00 -44.70 -46.70
4.0 398.00 21.60 10.29 10.19 9.02 -40.60 -44.90 -44.30
4.5 408.60 21.20 9.30 9.75 8.84 -42.30 -44.90 -42.50
5.0 421.10 24.80 8.55 9.49 8.78 -40.60 -46.70 -40.40
5.5 434.50 26.90 8.76 9.81 9.06 -38.20 -52.50 -40.20
6.0 447.70 26.40 9.03 10.09 9.26 -36.00 -58.70 -43.00
6.5 461.10 26.90 8.98 10.10 9.30 -33.70 -58.40 -47.70
7.0 474.80 27.30 8.81 10.00 9.21 -32.00 -52.10 -50.70
7.5 488.30 27.00 8.65 9.82 9.06 -30.50 -48.80 -53.00
8.0 501.40 26.20 8.51 9.58 8.88 -29.90 -47.70 -52.30
8.5 513.80 24.80 8.28 9.30 8.62 -29.70 -45.90 -50.30
9.0 523.80 20.00 7.91 8.92 8.17 -30.10 -46.70 -48.00
9.5 531.60 15.60 7.08 8.25 7.45 -32.40 -49.90 -45.80
10.0 547.40 31.60 6.34 7.60 6.73 -32.60 -51.50 -43.80
http://www.minicircuits.com/cgi-bin/spec?cat=vco&model=JTOS-EDR4679&pix=bk276.gif&bv=4 (1 of 2) [7/1/2004 3:16:33 AM]
Mini-Circuits - Specification for Voltage Controlled Oscillator - JTOS-EDR4679
Case Style - BK377 (inch,mm ) weight: 3 grams.
A B C D E F G H J
.505
12.827 .800
20.320 .100
2.540 .250
6.350 .100
2.540 .100
2.540 .047
1.194 .065
1.651
K L M N P Q R S T
.065
1.651 .525
13.335
Tolerance: .x ± .1 .xx ± .03 .xxx ± .015 inch.
Material and Finish:
Base: Glass epoxy laminate. Cover: Copper-Nickel alloy.
Leads: tin-lead plate or tin plate iron-nickel alloy.
Packaging:
Packaging information:
Tape Width(mm): 32
Reel Size(inches): 13
Device Cavity Pitch(mm): 20
Devices Per Reel: 500
Frequency (MHz) Varies
With Temperature
Freq. Pushing
(MHz/V)
(Referred To Vcc)
V-Tune -55°C +25°C +85°C 12V
0.5 316.80 311.81 307.52 -0.19
1.0 331.46 326.66 322.50 -0.13
1.5 344.90 339.90 336.00 -0.13
2.0 357.70 352.51 348.61 -0.13
2.5 369.79 364.35 360.51 -0.19
3.0 381.57 375.87 371.84 -0.06
3.5 392.77 387.20 382.98 -0.26
4.0 403.78 398.02 393.60 -0.13
4.5 413.38 408.64 404.61 -0.32
5.0 426.11 421.06 416.90 -0.38
5.5 439.87 434.50 429.82 -0.19
6.0 453.12 447.68 442.94 -0.38
6.5 466.88 461.12 456.06 -0.32
7.0 480.70 474.75 469.18 -0.32
7.5 494.46 488.26 482.43 -0.64
8.0 507.97 501.38 494.85 -0.64
8.5 520.64 513.79 506.37 -0.58
9.0 530.82 523.78 515.71 -0.83
9.5 536.83 531.58 528.64 -0.96
10.0 552.64 547.39 544.26 -0.90
Phase Noise
Carrier
Offset (Hz)
SSB Phase
Noise
(dBc/Hz)
1000 -81
10000 -98
100000 -119
1000000 -141
Back
http://www.minicircuits.com/cgi-bin/spec?cat=vco&model=JTOS-EDR4679&pix=bk276.gif&bv=4 (2 of 2) [7/1/2004 3:16:33 AM]
i2 Technologies US, Inc.
HTML Pages converted to PDF Document
This document contain component information from the
manufacturer's website which are not available in a revision
controlled document from the manufacturer. To facilitate the
addition of these parts into the Electronics Database, we are
converting the HTML pages related to that part, from the
manufacturer's website into Adobe PDF format. The contents of this
document is based on the information provided on the
manufacturer's website, therefore the information may have been
changed by the manufacturer since this was created.
Powering the Bottom Line ®
i2 Technologies US, Inc.
15445 Innovation Drive
San Diego, CA 92128
