Web page Tools & software Sample & buy Support & FAQ Document 492 Surface Mount Tip and Ring Filters AEC These surface mount tip and ring filters provide substantial reduction of noise throughout an extended frequency range. Their economical design makes them attractive for a wide variety of applications. Free evaluation samples are available by contacting Coilcraft or ordering them on-line at www.coilcraft.com. Q200 +85C Core material Ferrite Terminations RoHS tin-silver-copper over tin over nickel over phos bronze Weight 214 - 216 mg Ambient temperature -40C to +85C Storage temperature Component: -40C to +85C. Tape and reel packaging: -40C to +80C Resistance to soldering heat Max three 40 second reflows at +260C, parts cooled to room temperature between cycles Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30C / 85% relative humidity) Packaging 500/7 reel; 2000/13 reel Plastic tape: 16 mm wide, 0.35 mm thick, 8 mm pocket spacing, 4.4 mm pocket depth PCB washing Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. See Doc787_PCB_Washing.pdf. Part number1 Lines Common mode peak impedance (kOhms) Cutoff frequency2 (MHz) Inductance min (H)3 DCR max4 (mOhms) Isolation5 (Vrms) Current6 (mAdc) PTRF2000L_ PTRF4000L_ 0.814 @ 11 MHz 0.851 @ 12 MHz 38 41 35 35 0.075 0.135 1500 1500 500 500 1 2 1. When ordering, please specify packaging code: PTRF4000LC C = 7 machine ready reel. EIA-481 embossed plastic tape, 500 parts per full reel. B = Less than full reel. In tape, but not machine ready. To have a leader and trailer added ($25 charge), use code letter C instead. D = 13 machine ready reel. EIA-481 embossed plastic tape. Factory order only, not stocked, 2000 parts per full reel. 2 Frequency at which the differential mode attenuation equals -3 dB 3 Inductance shown for each winding, measured at 130 kHz, 0.1 Vrms, 0 Adc on an Agilent/HP 4284A LCR meter or equivalent. 4 DCR is for each winding. 5 Interwinding isolation (hipot) tested for one minute. 6 Electrical specifications at 25C. Refer to Doc 362 "Soldering Surface Mount Components" before soldering. 0.307 0.008 7,80 0,20 Packaging: PTRF2000 0.138 0.006 3,50 0,15 4 8 5 1 2 3 4 8 7 6 5 * * 0.236 6,00 0.012 0,305 5 4 0.217 0.008 5,50 0,20 1 0.098 2,50 PTRF4000 1 0.007 / 0,18 0.317 0.012 8,05 0,30 0.030 0,76 US +1-847-639-6400 sales@coilcraft.com UK +44-1236-730595 sales@coilcraft-europe.com Taiwan +886-2-2264 3646 sales@coilcraft.com.tw China +86-21-6218 8074 sales@coilcraft.com.cn Singapore + 65-6484 8412 sales@coilcraft.com.sg 0.050cen 1,27 * Dimensions are typical prior to applying solder 0.050 cen 1,27 Dimensions are in inches mm 8 0.0395 1,00 0.020 0,50 5 8 Recommended Land Pattern 4 1 0.200 5,08 Document 492 0.060 1,52 Revised 11/30/18 (c) Coilcraft Inc. 2018 This product may not be used in medical or high risk applications without prior Coilcraft approval. Specification subject to change without notice. Please check web site for latest information. Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Coilcraft: PTRF4000LB PTRF2000LC PTRF4000LC PTRF2000LB