US
UK
Taiwan
China
Singapore
+1-847-639-6400 sales@coilcraft.com
+44-1236-730595 sales@coilcraft-europe.com
+886-2-2264 3646 sales@coilcraft.com.tw
+86-21-6218 8074 sales@coilcraft.com.cn
+ 65-6484 8412 sales@coilcraft.com.sg
© Coilcraft Inc. 2018
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specification subject to change without notice.
Please check web site for latest information.
AEC
Q200 85°C
+
Common mode Cutoff
Part peak impedance frequency2 Inductance DCR max4 Isolation5 Current6
number1 Lines (kOhms) (MHz)
min (µH)3 (mOhms) (Vrms) (mAdc)
PTRF2000L_ 1 0.814 @ 11 MHz 38 35 0.075 1500 500
PTRF4000L_ 2 0.851 @ 12 MHz 41 35 0.135 1500 500
Sample
& buy
Support
& FAQ
Web
page
Tools &
softw
are
Surface Mount Tip and Ring Filters
Document 492
Document 492 Revised 11/30/18
These surface mount tip and ring filters provide substan-
tial reduction of noise throughout an extended frequency
range. Their economical design makes them attractive for
a wide variety of applications.
Free evaluation samples are available by contacting
Coilcraft or ordering them on-line at www.coilcraft.com.
0.050
1,27 cen
0.060
1,52
0.030
0,76
Recommended
Land Pattern
81
54
0.200
5,08
0.012
0,305
0.098
2,50
0.138 ±0.006
3,50 ±0,15
0.217 ±0.008
5,50 ±0,20
0.317 ±0.012
8,05 ±0,30
0.020
0,50
0.050
1,27 cen
0.0395
1,00
0.236
6,00
Dimensions are typical prior to applying solder
1
45
8
0.307 ±0.008
7,80 ±0,20
0.007/0,18
*
**
inches
mm
Dimensions
are in
1. When ordering, please specify packaging code:
PTRF4000LC
Packaging: C = 7″ machine ready reel. EIA-481 embossed plastic
tape, 500 parts per full reel.
B = Less than full reel. In tape, but not machine ready.
To have a leader and trailer added ($25 charge), use
code letter C instead.
D = 13″ machine ready reel. EIA-481 embossed plastic
tape. Factory order only, not stocked, 2000 parts per
full reel.
2 Frequency at which the differential mode attenuation equals −3 dB
3 Inductance shown for each winding, measured at 130 kHz, 0.1 Vrms,
0 Adc on an Agilent/HP 4284A LCR meter or equivalent.
4 DCR is for each winding.
5 Interwinding isolation (hipot) tested for one minute.
6 Electrical specifications at 25°C.
Refer to Doc 362 “Soldering Surface Mount Components” before soldering.
8
8
1
1
7
2
6
3
5
5
4
4
PTRF4000PTRF2000
Core material Ferrite
Terminations RoHS tin-silver-copper over tin over nickel over phos bronze
Weight 214 – 216 mg
Ambient temperature –40°C to +85°C
Storage temperature Component: –40°C to +85°C.
Tape and reel packaging: –40°C to +80°C
Resistance to soldering heat Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C /
85% relative humidity)
Packaging 500/7″ reel; 2000/13″ reel Plastic tape: 16 mm wide,
0.35 mm thick, 8 mm pocket spacing, 4.4 mm pocket depth
PCB washing Tested to MIL-STD-202 Method 215 plus an additional
aqueous wash. See Doc787_PCB_Washing.pdf.
