RPC Series Stackpole Electronics, Inc. Pulse Withstanding Thick Film Chip Resistor Features: * * * * * * * Resistive Product Solutions Excellent pulse withstanding performance Broad resistance range Higher anti-surge performance compared with RMCF Series Standard power RPC, 5% and wider tolerances, are untrimmed 1% and wider tolerances are qualified to AEC-Q200 RoHS compliant and halogen free Lower values may be available - contact factory Electrical Specifications Type / Code RPC0603 Power Rating (Watts) @ 70C 0.1W Maximum Working Voltage Maximum Overload Voltage 50V 0.25W 150V 300V RPC1206 0.33W 200V 400V RPC1210 0.5W 200V 400V RPC2512 0.75W 1.5W 200 ppm/C 100V RPC0805 RPC2010 Resistance Temperature Coefficient 400V 500V Ohmic Range () and Tolerance 0.5% 10 - 294 1% 1 - 294 10 - 294 1 - 294 100 ppm/C 200 ppm/C 300 - 1M 100 ppm/C 200 ppm/C 10 - 20 800V 1000V 22 - 20M 10 - 20 1 - 20 20.5 - 20M 22 - 20M 10 - 20 100 ppm/C 200 ppm/C 1 - 20 20.5 - 20M 100 ppm/C 200 ppm/C 1 - 270 300 - 20M 100 ppm/C 200 ppm/C 5%, 10%, 20% 1 - 270 1 - 20 20.5 - 20M 22 - 20M 10 - 20 100 ppm/C Working Voltage = (P*R) or Max. Working Voltage listed above, whichever is lower. Overload Voltage = 2.5*(P*R) or Max. Overload Voltage listed above, whichever is lower. 1 - 20 20.5 - 20M 22 - 20M Electrical Specifications - High Power Type / Code RPC0603_-HP Power Rating (Watts) @ 70C 0.25W Maximum Working Voltage 150V 0.4W 150V 300V RPC1206_-HP 0.5W 200V 400V RPC2010_-HP 0.75W 1W 200V 400V 200 ppm/C 100V RPC0805_-HP RPC1210_-HP Resistance Temperature Coefficient Maximum Overload Voltage This specification may be changed at any time without prior notice Please confirm technical specifications before you order and/or use. 0.5% 10 - 294 200 ppm/C 400V 800V 1 1 - 20 10 - 20 20.5 - 20M 10 - 20 22 - 20M 1 - 20 20.5 - 20M 100 ppm/C 200 ppm/C 1 - 294 300 - 1M 100 ppm/C 200 ppm/C 5% 1 - 294 10 - 294 100 ppm/C 200 ppm/C 1% 300 - 1M 100 ppm/C 100 ppm/C Working Voltage = (P*R) or Max. Working Voltage listed above, whichever is lower. Overload Voltage = 2.5*(P*R) or Max. Overload Voltage listed above, whichever is lower. Rev Date: 03/02/2018 Ohmic Range () and Tolerance 10 - 20 22 - 20M 1 - 20 20.5 - 20M 22 - 1M www.seielect.com marketing@seielect.com RPC Series Stackpole Electronics, Inc. Pulse Withstanding Thick Film Chip Resistor Resistive Product Solutions Mechanical Specifications L W H D1 D2 Body Length Body Width Body Height Top Termination Bottom Termination 2.042 0.063 0.004 1.60 0.10 0.031 0.004 0.80 0.10 0.018 0.004 0.45 0.10 0.012 0.008 0.30 0.20 0.012 0.008 0.30 0.20 inches mm RPC0805 4.368 0.079 0.004 2.00 0.10 0.049 0.004 1.25 0.10 0.020 0.004 0.50 0.10 0.014 0.008 0.35 0.20 0.016 0.008 0.40 0.20 inches mm RPC1206 8.947 0.122 0.004 3.10 0.10 0.061 0.004 1.55 0.10 0.022 0.004 0.55 0.10 0.020 0.010 0.50 0.25 0.020 0.008 0.50 0.20 inches mm RPC1210 15.959 0.122 0.004 3.10 0.10 0.102 0.006 2.60 0.15 0.022 0.004 0.55 0.10 0.020 0.010 0.50 0.25 0.020 0.008 0.50 0.20 inches mm RPC2010 24.241 0.197 0.004 5.00 0.10 0.098 0.006 2.50 0.15 0.022 0.004 0.55 0.10 0.024 0.010 0.60 0.25 0.020 0.008 0.50 0.20 inches mm RPC2512 39.448 0.250 0.004 6.35 0.10 0.122 0.006 3.10 0.15 0.022 0.004 0.55 0.10 0.024 0.010 0.60 0.25 0.020 0.008 0.50 0.20 inches mm Type / Code Weight (g) (1000 pcs) RPC0603 Unit Performance Characteristics Item Test Method Temperature Coefficient of Resistance (T.C.R.) JIS-C-5201-1 4.8 IEC-60115-1 4.8 JIS-C-5201-1 4.13 IEC-60115-1 4.13 JIS-C-5201-1 4.6 IEC-60115-1 4.6 JIS-C-5201-1 4.25 IEC-60115-1 4.25.1 JIS-C-5201-1 4.25 IEC-60115-1 4.25.1 Short Time Overload Insulation Resistance Endurance Tolerances of 0.5%, 1% Endurance Tolerances of 5%, 10%, 20% Damp Heat with Load Tolerances of 0.5%, 1% Damp Heat with Load Tolerances of 5%, 10%, 20% Dry Heat Tolerances of 0.5%, 1% Dry Heat Tolerances of 5%, 10%, 20% Bending Strength Solderability Resistance to Soldering Heat tolerances of 0.5%, 1% Resistance to Soldering Heat tolerances of 5%, 10%, 20% Test Specification Within the specified tolerance (1%+0.05) Test Condition -55C ~+125C, 25C is the reference temperature RCWV*2.5 or max. overload voltage whichever is lower for 5 seconds 10G Max. overload voltage for 1 minute (1%+0.05) 70 2C, RCWV for 1000 hours with 1.5 hours "ON" and 0.5 hour "OFF" 70 2C, RCWV for 1000 hours with 1.5 hours "ON" and 0.5 hour "OFF" 40 2C, 90~95% R.H, RCWV for 1000 hour with 1.5 hours "ON" and 0.5 hour "OFF" 40 2C, 90~95% R.H, RCWV for 1000 hours with 1.5 hours "ON" and 0.5 hour "OFF" (3%+0.05) JIS-C-5201-1 4.24 (0.5%+0.05) JIS-C-5201-1 4.24 (3%+0.05) JIS-C-5201-1 4.23 IEC-60115-1 2.23.2 JIS-C-5201-1 4.23 IEC-60115-1 2.23.2 JIS-C-5201-1 4.33 IEC-60115-1 4.33 JIS-C-5201-1 4.17 IEC-60115-1 4.17 JIS-C-5201-1 4.18 IEC-60115-1 4.18 JIS-C-5201-1 4.18 IEC-60115-1 4.18 (0.5%+0.05) At +155C for 1000 hours (3%+0.05) At +155C for 1000 hours (1%+0.05) Bending once for 5 seconds 2010, 2512 sizes: 2mm; other sizes: 3mm 95% min. coverage 245 5C for 3 seconds (0.5%+0.05) 260 5C for 10 seconds (1%+0.05) 260 5C for 10 seconds Rev Date: 03/02/2018 This specification may be changed at any time without prior notice Please confirm technical specifications before you order and/or use. 2 www.seielect.com marketing@seielect.com RPC Series Stackpole Electronics, Inc. Pulse Withstanding Thick Film Chip Resistor Resistive Product Solutions Performance Characteristics (cont.) Item Test Method Test Specification Test Condition JIS-C-5201-1 4.7 No Breakdown or flashover IEC-60115-1 4.7 Individual leaching area 5% JIS-C-5201-1 4.18 Leaching Total leaching area 10% IEC-60068-2-58-8.2.1 Rapid Change of Temperature JIS-C-5201-1 4.18 (0.5%+0.05) tolerances of 0.5%, 1% IEC-60115-1 4.18 Rapid Change of Temperature JIS-C-5201-1 4.18 (1%+0.05) tolerances of 5%, 10%, 20% IEC-60115-1 4.18 RCWV (Rated Continuous Working Voltage)= (P*R) or Max. Working Voltage whichever is Storage Temperature: 253C; humidity < 80% R.H. Voltage Proof 1.42 times max. operating voltage for 1 minute 260 5C for 30 seconds -55C to + 150C , 5 cycles -55C to + 150C , 5 cycles Packaging Specifications - Paper Tape Type RPC0603 RPC0805 RPC1206 RPC1210 L 0.043 1.10 0.063 1.60 0.075 1.90 0.110 2.80 Type RPC0603 RPC0805 RPC1206 RPC1210 M 0.004 0.10 0.004 0.10 0.004 0.10 0.004 0.10 0.075 1.90 0.094 2.40 0.138 3.50 0.138 3.50 0.004 0.10 0.004 0.10 0.004 0.10 0.004 0.10 0.157 4.00 0.157 4.00 0.157 4.00 0.157 4.00 P0 0.157 4.00 0.157 4.00 0.157 4.00 0.157 4.00 W 0.004 0.10 0.008 0.20 0.008 0.20 0.008 0.20 0.315 8.00 0.315 8.00 0.315 8.00 0.315 8.00 0.394 10.00 0.394 10.00 0.394 10.00 0.394 10.00 0.079 2.00 0.079 2.00 0.079 2.00 0.079 2.00 P1 E 0.008 0.20 0.008 0.20 0.008 0.20 0.008 0.20 0.069 1.75 0.069 1.75 0.069 1.75 0.069 1.75 0.002 0.05 0.002 0.05 0.002 0.05 0.002 0.05 0.059 1.50 0.059 1.50 0.059 1.50 0.059 1.50 P2 Power Derating Curve: Percent Rated Power (%) 100 F 0.004 0.10 0.004 0.10 0.004 0.10 0.004 0.10 0.138 3.50 0.138 3.50 0.138 3.50 0.138 3.50 OD0 -55C Unit 0.002 0.05 0.002 0.05 0.002 0.05 0.002 0.05 K1/K2 0.004 0.10 0.004 0.10 0.004 0.10 0.004 0.10 0.028 0.70 0.033 0.85 0.033 0.85 0.033 0.85 inches mm inches mm inches mm inches mm Unit 0.004 0.10 0.004 0.10 0.004 0.10 0.004 0.10 inches mm inches mm inches mm inches mm 70C 80 60 40 20 155C 0 -60 0 20 40 60 80 100 120 140 160 180 Ambient Temperature (C) Rev Date: 03/02/2018 This specification may be changed at any time without prior notice Please confirm technical specifications before you order and/or use. 3 www.seielect.com marketing@seielect.com RPC Series Stackpole Electronics, Inc. Pulse Withstanding Thick Film Chip Resistor Resistive Product Solutions Packaging Specifications - Embossed Plastic Tape Type L RPC2010 RPC2512 0.110 2.80 0.138 3.50 0.008 0.20 0.008 0.20 P0 0.217 5.50 0.264 6.70 0.157 0.004 4.00 0.10 0.157 0.004 4.00 0.10 0.157 4.00 0.157 4.00 Type RPC2010 RPC2512 M W 0.008 0.20 0.008 0.20 P1 0.472 12.00 0.472 12.00 0.394 10.00 0.394 10.00 0.079 2.00 0.079 2.00 0.012 0.30 0.012 0.30 P2 0.002 0.05 0.002 0.05 E F Unit 0.069 0.004 1.75 0.10 0.069 0.004 1.75 0.10 OD0 0.217 0.002 5.50 0.05 0.217 0.002 5.50 0.05 K1/K2 inches mm inches mm Unit 0.059 1.50 0.059 1.50 0.047 1.20 0.047 1.20 inches mm inches mm 0.004 0.10 0.004 0.10 - 0.000 0.00 0.000 0.00 Recommended Pad Layout SIZE RPC0201 RPC0402 RPC0603 RPC0805 RPC1206 RPC1210 RPC2010 RPC2512 L 0.031 0.79 0.051 1.30 0.079 2.00 0.102 2.60 0.150 3.80 0.150 3.80 0.232 5.90 0.283 7.20 Rev Date: 03/02/2018 This specification may be changed at any time without prior notice Please confirm technical specifications before you order and/or use. H 0.017 0.43 0.024 0.60 0.035 0.90 0.051 1.30 0.067 1.70 0.098 2.50 0.098 2.50 0.126 3.20 4 W 0.011 0.28 0.016 0.40 0.020 0.50 0.028 0.70 0.035 0.90 0.035 0.90 0.039 1.00 0.039 1.00 Unit inches mm inches mm inches mm inches mm inches mm inches mm inches mm inches mm www.seielect.com marketing@seielect.com RPC Series Stackpole Electronics, Inc. Pulse Withstanding Thick Film Chip Resistor Resistive Product Solutions Lightning Surge Resistors are tested in accordance with IEC 60115-1 using both 1.2/50us and 10/700 pulse shapes. The limit of acceptance is a shift in resistance of less than 1% from the initial value. (*) 1. 1.2/50us Lightning Surge RPC-HP (High Power) All Tolerances RPC (Std. Power) Tolerances of 0.5% and 1% RPC (Std. Power) Tolerances of 5%, 10% and 20% (*) Note: Data provided shows typical performance and is for reference only. 2. 10/700us Lightning Surge(*) RPC-HP (High Power) All Tolerances RPC (Std. Power) Tolerances of 0.5% and 1% RPC (Std. Power) Tolerances of 5%, 10% and 20% (*) Note: Data provided shows typical performance and is for reference only. Rev Date: 03/02/2018 This specification may be changed at any time without prior notice Please confirm technical specifications before you order and/or use. 5 www.seielect.com marketing@seielect.com RPC Series Stackpole Electronics, Inc. Pulse Withstanding Thick Film Chip Resistor Resistive Product Solutions Pulse Withstand Capacity The single impulse graph is the result of 50 impulses of rectangular shape applied at one minute intervals. The limit of acceptance was a shift in resistance of less than 1% from the initial value. The power applied was subject to the restrictions of the maximum permissible impulse voltage graph shown. Single Pulse Power (100 Ohm) RPC-HP (High Power) All Tolerances RPC (Std. Power) Tolerances of 0.5% and 1% RPC (Std. Power) Tolerances of 5%, 10% and 20% This data is for the 100 resistance value for each size. Pulse power handling is dependent on the resistance value. For resistance values higher or lower than 100, contact Stackpole for advice on pulse handling characteristics of your particular resistance value of interest. Continuous Pulse The continuous load graph was obtained by applying repetitive rectangular pulses where the pulse period was adjusted so that the average power dissipated in the resistor was equal to its rated power at 70C. Again the limit of acceptance was a shift in resistance of less than 1% from the initial value. Continuous Pulse Power (100 Ohm) RPC-HP (High Power) All Tolerances RPC (Std. Power) Tolerances of 0.5% and 1% Rev Date: 03/02/2018 This specification may be changed at any time without prior notice Please confirm technical specifications before you order and/or use. RPC (Std. Power) Tolerances of 5%, 10% and 20% 6 www.seielect.com marketing@seielect.com RPC Series Stackpole Electronics, Inc. Pulse Withstanding Thick Film Chip Resistor Resistive Product Solutions Pulse Voltage (100 Ohm) RPC-HP (High Power) All Tolerances RPC (Std. Power) Tolerances of 0.5% and 1% RPC (Std. Power) Tolerances of 5%, 10% and 20% RoHS Compliance Stackpole Electronics has joined the worldwide effort to reduce the amount of lead in electronic components and to meet the various regulatory requirements now prevalent, such as the European Union's directive regarding "Restrictions on Hazardous Substances" (RoHS 2). As part of this ongoing program, we periodically update this document with the status regarding the availability of our compliant components. All our standard part numbers are compliant to EU Directive 2011/65/EU of the European Parliament. RoHS Compliance Status Standard Product Series RPC Description Package / Termination Type Standard Series RoHS Compliant Lead-Free Termination Composition Lead-Free Mfg. Effective Date (Std Product Series) Lead-Free Effective Date Code (YY/WW) Pulse Withstanding Thick Film Surface Mount Chip Resistor SMD YES(1) 100% Matte Sn over Ni Jan-03 03/01 Note (1): RoHS Compliant by means of exemption 7c-I. "Conflict Metals" Commitment We at Stackpole Electronics, Inc. are joined with our industry in opposing the use of metals mined in the "conflict region" of the Eastern Democratic Republic of the Congo (DRC) in our products. Recognizing that the supply chain for metals used in the electronics industry is very complex, we work closely with our own suppliers to verify to the extent possible that the materials and products we supply do not contain metals sourced from this conflict region. As such, we are in compliance with the requirements of Dodd-Frank Act regarding Conflict Minerals. Compliance to "REACH" We certify that all passive components supplied by Stackpole Electronics, Inc. are SVHC (Substances of Very High Concern) free and compliant with the requirements of EU Directive 1907/2006/EC, "The Registration, Evaluation, Authorization and Restriction of Chemicals", otherwise referred to as REACH. Contact us for complete list of REACH Substance Candidate List. Rev Date: 03/02/2018 This specification may be changed at any time without prior notice Please confirm technical specifications before you order and/or use. 7 www.seielect.com marketing@seielect.com RPC Series Stackpole Electronics, Inc. Pulse Withstanding Thick Film Chip Resistor Resistive Product Solutions Environmental Policy It is the policy of Stackpole Electronics, Inc. (SEI) to protect the environment in all localities in which we operate. We continually strive to improve our effect on the environment. We observe all applicable laws and regulations regarding the protection of our environment and all requests related to the environment to which we have agreed. We are committed to the prevention of all forms of pollution. How to Order RPC 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 R P C 1 2 0 6 F T 1 R 2 0 - H P Product Series Pulse Withstanding Size 0603 0603(HP) 0805 0805(HP) 1206 1206(HP) 1210 1210(HP) 2010 2010(HP) 2512 Power 0.1W 0.2W 0.25W 0.4W 0.33W 0.5W 0.5W 0.75W 0.75W 1W 1.5W Tolerance Code Tol Value 0.5% E96 D 1% E24 F J 5% 10% E24 K 20% M Rev Date: 03/02/2018 This specification may be changed at any time without prior notice Please confirm technical specifications before you order and/or use. Code T G Packaging Description Size 0603 7" Reel 0805 Paper Tape 1206 1210 7" Reel 2010 Plastic Tape 2512 10" Reel 0805 Paper Tape 1206 8 Quantity 5,000 Resistance Value Four characters with the multiplier used as the decimal holder. 300 ohm = 300R 10.2 Kohm = 10K2 1 Mohm = 1M00 Code -HP Special Descriiption High Power 4,000 10,000 www.seielect.com marketing@seielect.com