V-730 P Vishay Sprague Film Capacitors High Frequency, Wrap-and-Fill, Metallized Polypropylene FEATURES * Excellent AC performance * Low power dissipation * Low dielectric absorption * Close tolerance * High stability * Compliant to RoHS directive 2002/95/EC PERFORMANCE CHARACTERISTICS DC Life Test: 150 % of rated voltage for 1000 h at + 85 C. No open or short circuits. No visible damage. Maximum CAP 1.0 % Minimum IR = 50 % of initial limit Maximum DF = 0.12 % Operating Temperature: - 55 C to + 85 C Voltage Derating: At + 105 C, 50 % of + 85 C rating ESR: 20 kHz to 100 kHz Capacitance Range: 0.022 F to 10.0 F Capactiance Tolerance: 20 %, 10 %, 5 % DC Voltage Rating: 100 WVDC to 630 WVDC AC Voltage Rating: 70 VRMS to 275 VRMS, 60 Hz to 400 Hz Dissipation Factor: 0.1 % maximum Measure all units at 1000 Hz, at + 25 C DC Voltage Test: 200 % of rated voltage for 2 min AC Voltage Test: 130 % of rated RMS voltage at 60 Hz for 15 s Insulation Resistance: Measured at 100 WVDC after a 2 min charge. At + 25 C: 200 000 M/F or 400 000 M minimum At + 85 C: 10 000 M/F or 20 000 M minimum At + 105 C: 1000 M/F or 2000 M minimum Vibration Test (Condition B): No mechanical damage, short, open or intermittent circuits. Humidity Test: 95 % relative humidity at + 40 C for 250 h. No visible damage. Maximum CAP 1.0 % Minimum IR = 20 % of initial limit Maximum DF = 0.12 % AC Life Test: 110 % of rated RMS voltage at 60 Hz for 1000 h at + 85 C. Maximum CAP 5 % Minimum IR = 50 % of initial limit Maximum DF = 0.12 % PHYSICAL CHARACTERISTICS Lead Pull: 5 lb (2.3 kg) for one min. No physical damage. Lead Bend: After three complete consecutive bends. No damage. Marking: Sprague(R) trademark, type or part number, capacitance and voltage. DIMENSIONS in inches [millimeters] 1.750 [44.45] Min. L 0.062 [1.57] 1.750 [44.45] Min. D Max. Solid Tinned Wire (1) 0.032 [0.81] Nominal Dia. (No. 20 AWG) Note (1) Leads to be within 0.062" [1.57 mm] of center line at egress but not less than 0.031" [0.79 mm] from edge. Document Number: 42092 Revision: 12-Mar-09 For technical questions, contact: spresale@vishay.com www.vishay.com 25 V-730 P Vishay Sprague Film Capacitors High Frequency, Wrap-and-Fill, Metallized Polypropylene STANDARD RATINGS in inches [millimeters] CAPACITANCE PART NUMBER (1) (F) ESR MAXIMUM RIPPLE CURRENT (m) (ARMS) at 20 kHz 20 kHz CASE TEMPERATURE (2) at to 100 kHz + 25 C + 35 C + 45 C + 55 C + 65 C + 75 C + 85 C L 100 WVDC 0.75 [19.0] 2.3 2.3 2.3 2.3 2.3 1.8 1.0 0.75 [19.0] 2.6 2.6 2.6 2.6 2.4 1.9 1.1 0.75 [19.0] 2.8 2.8 2.8 2.8 2.6 2.2 1.2 0.75 [19.0] 3.1 3.1 3.1 3.1 2.9 2.3 1.3 0.75 [19.0] 37.0 3.7 3.4 3.1 2.8 2.5 2.0 1.4 1.00 [25.4] 35.0 3.9 3.6 3.3 2.9 2.6 2.1 1.5 1.00 [25.4] 33.0 4.1 3.8 3.5 3.1 2.8 2.2 1.6 1.00 [25.4] 31.0 4.3 4.0 3.6 3.2 2.9 2.3 1.7 1.00 [25.4] 26.0 5.5 5.1 4.7 4.2 3.6 2.8 2.6 1.00 [25.4] 24.0 5.7 5.3 4.9 4.4 3.8 3.0 2.8 1.00 [25.4] 20.0 6.1 5.5 5.1 4.6 4.0 3.2 3.1 1.00 [25.4] 19.0 6.3 5.7 5.3 4.8 4.1 3.4 3.0 1.25 [31.8] 18.0 6.5 6.0 5.5 4.9 4.2 3.5 3.2 1.25 [31.8] 18.0 6.8 6.3 5.7 5.1 4.4 3.6 3.3 1.25 [31.8] 17.0 7.1 6.5 6.0 5.3 4.6 3.7 3.4 1.25 [31.8] 16.0 7.3 6.7 6.2 5.5 4.8 3.9 3.5 1.25 [31.8] 16.0 7.4 6.8 6.4 5.6 4.9 4.0 3.6 1.25 [31.8] 15.0 7.6 6.9 6.6 5.8 5.1 4.1 3.7 1.75 [44.5] 15.0 7.8 7.0 6.7 5.9 5.2 4.2 3.8 1.75 [44.5] 15.0 8.1 7.4 6.8 6.0 5.3 4.3 3.9 1.75 [44.5] 14.0 8.3 7.6 7.0 6.2 5.4 4.4 4.0 1.75 [44.5] 14.0 8.4 7.7 7.1 6.4 5.5 4.5 4.1 1.75 [44.5] 14.0 8.5 7.8 7.2 6.5 5.6 4.6 4.2 1.75 [44.5] 13.0 8.5 8.0 7.4 6.7 5.7 4.7 4.3 1.75 [44.5] 13.0 8.6 8.3 7.7 6.8 6.0 4.8 4.4 1.75 [44.5] 13.0 8.8 8.6 8.0 7.0 6.1 4.9 4.5 1.75 [44.5] 12.0 9.0 9.0 8.5 7.6 6.6 5.4 4.9 250 WVDC 0.75 [19.0] 1.5 1.5 1.5 1.5 1.5 1.5 0.9 0.75 [19.0] 1.9 1.9 1.9 1.9 1.9 1.7 1.1 0.75 [19.0] 2.3 2.3 2.3 2.3 2.3 1.9 1.1 0.75 [19.0] 2.7 2.7 2.7 2.7 2.5 2.0 1.2 1.00 [25.4] 1.9 1.9 1.9 1.9 1.9 1.9 1.3 1.00 [25.4] 2.4 2.4 2.4 2.4 2.4 2.2 1.4 1.00 [25.4] 2.9 2.9 2.9 2.9 2.9 2.3 1.5 1.00 [25.4] 3.4 3.4 3.4 3.2 2.9 2.3 1.6 1.00 [25.4] 35.0 3.8 3.7 3.6 3.4 2.9 2.4 1.7 1.00 [25.4] 33.0 3.9 3.8 3.7 3.5 3.1 2.5 1.8 1.25 [31.8] 32.0 4.0 3.9 3.8 3.7 3.2 2.6 1.9 1.25 [31.8] 31.0 4.2 4.1 4.0 3.9 3.4 2.8 2.0 1.25 [31.8] 28.0 4.4 4.4 4.4 4.4 4.3 3.5 3.2 1.25 [31.8] 27.0 4.7 4.6 4.5 5.0 4.5 3.7 3.3 1.25 [31.8] 26.0 5.1 5.0 4.9 5.4 4.7 3.9 3.5 1.25 [31.8] 25.0 5.9 5.8 5.7 5.7 5.0 4.1 3.7 1.25 [31.8] 21.0 7.2 7.2 6.8 6.0 5.2 4.3 3.9 1.75 [44.5] 20.0 8.4 7.5 7.0 6.3 5.4 4.5 4.1 1.75 [44.5] 19.0 8.6 7.8 7.3 6.6 5.7 4.7 4.3 1.75 [44.5] 18.0 9.0 8.3 7.6 6.8 5.9 4.8 4.4 1.75 [44.5] 18.0 9.0 8.4 7.8 7.0 6.0 4.9 4.5 1.75 [44.5] 17.0 9.0 8.5 8.0 7.2 6.2 5.0 4.6 1.75 [44.5] 16.0 9.0 8.6 8.2 7.4 6.3 5.1 4.7 1.75 [44.5] 16.0 9.0 8.8 8.5 7.7 6.6 5.3 4.9 1.75 [44.5] 15.0 9.0 9.0 8.8 7.9 6.8 5.6 5.1 1.75 [44.5] 15.0 9.0 9.0 8.9 8.0 7.0 5.8 5.3 1.75 [44.5] 15.0 9.0 9.0 9.0 8.2 7.2 5.9 5.5 2.25 [57.2] 15.0 9.0 9.0 9.0 8.4 7.4 6.0 5.6 2.25 [57.2] 14.0 9.0 9.0 9.0 8.7 7.8 6.3 5.8 2.25 [57.2] 14.0 9.0 9.0 9.0 8.8 7.9 6.4 5.9 2.25 [57.2] 13.0 9.0 9.0 9.0 8.9 8.3 6.8 6.2 CASE SIZE D 0.22 0.27 0.33 0.39 0.47 0.56 0.68 0.82 1.0 1.2 1.5 1.8 2.0 2.2 2.7 3.0 3.3 3.9 4.0 4.7 5.0 5.6 6.0 6.8 8.0 8.2 10.0 V-730P224X9100 V-730P274X9100 V-730P334X9100 V-730P394X9100 V-730P474X9100 V-730P564X9100 V-730P684X9100 V-730P824X9100 V-730P105X9100 V-730P125X9100 V-730P155X9100 V-730P185X9100 V-730P205X9100 V-730P225X9100 V-730P275X9100 V-730P305X9100 V-730P335X9100 V-730P395X9100 V-730P405X9100 V-730P475X9100 V-730P505X9100 V-730P565X9100 V-730P605X9100 V-730P685X9100 V-730P805X9100 V-730P825X9100 V-730P106X9100 0.275 [7.0] 0.298 [7.6] 0.324 [8.2] 0.347 [8.8] 0.376 [9.6] 0.321 [8.2] 0.348 [8.8] 0.377 [9.6] 0.421 [10.7] 0.454 [11.5] 0.500 [12.7] 0.541 [13.7] 0.486 [12.3] 0.507 [12.9] 0.554 [14.1] 0.581 [14.8] 0.606 [15.4] 0.654 [16.6] 0.537 [13.6] 0.577 [14.7] 0.593 [15.1] 0.624 [15.8] 0.644 [16.4] 0.682 [17.3] 0.735 [18.7] 0.743 [18.9] 0.815 [20.7] 0.1 0.12 0.15 0.18 0.22 0.27 0.33 0.39 0.47 0.56 0.68 0.82 1.0 1.2 1.5 1.8 2.0 2.2 2.7 3.0 3.3 3.9 4.0 4.7 5.0 5.6 6.0 6.8 8.0 8.2 10.0 V-730P104X9250 V-730P124X9250 V-730P154X9250 V-730P184X9250 V-730P224X9250 V-730P274X9250 V-730P334X9250 V-730P394X9250 V-730P474X9250 V-730P564X9250 V-730P684X9250 V-730P824X9250 V-730P105X9250 V-730P125X9250 V-730P155X9250 V-730P185X9250 V-730P205X9250 V-730P225X9250 V-730P275X9250 V-730P305X9250 V-730P335X9250 V-730P395X9250 V-730P405X9250 V-730P475X9250 V-730P505X9250 V-730P565X9250 V-730P605X9250 V-730P685X9250 V-730P805X9250 V-730P825X9250 V-730P106X9250 0.279 [7.1] 0.300 [7.6] 0.327 [8.3] 0.353 [9.0] 0.306 [7.8] 0.333 [8.5] 0.362 [9.2] 0.389 [9.9] 0.422 [10.7] 0.464 [11.8] 0.425 [10.8] 0.471 [12.0] 0.513 [13.0] 0.554 [14.1] 0.613 [15.6] 0.667 [17.0] 0.700 [17.8] 0.610 [15.5] 0.669 [17.0] 0.703 [17.9] 0.734 [18.6] 0.794 [20.2] 0.803 [20.4] 0.866 [22.0] 0.892 [22.7] 0.941 [23.9] 0.972 [24.7] 0.882 [22.4] 0.953 [24.2] 0.964 [24.5] 1.060 [26.9] Notes Other capacitance values and voltage ratings are available upon request (1) Part Numbers listed are for a capacitance tolerance of 10 %. To specifiy 20 % tolerance, change the "X9" in the Part Number to "X0"; for 5 %, from "X9" to "X5". (2) The peak current pulse capability ot these capacitors is 10 A/F. The maximum rate voltage change is 10 V/s. www.vishay.com 26 For technical questions, contact: spresale@vishay.com Document Number: 42092 Revision: 12-Mar-09 V-730 P Film Capacitors High Frequency, Wrap-and-Fill, Metallized Polypropylene Vishay Sprague STANDARD RATINGS in inches [millimeters] CAPACITANCE (F) CASE SIZE PART NUMBER(1) D L 0.047 0.056 0.068 0.082 0.1 0.12 0.15* 0.18 0.22 0.27 0.33 0.39 0.47 0.56 0.68 0.82 1.0 1.2 1.5 1.8 2.0 2.2 2.7 3.0 3.3 3.9 V-730P473X9400 V-730P563X9400 V-730P683X9400 V-730P823X9400 V-730P104X9400 V-730P124X9400 V-730P154X9400 V-730P184X9400 V-730P224X9400 V-730P274X9400 V-730P334X9400 V-730P394X9400 V-730P474X9400 V-730P564X9400 V-730P684X9400 V-730P824X9400 V-730P105X9400 V-730P125X9400 V-730P155X9400 V-730P185X9400 V-730P205X9400 V-730P225X9400 V-730P275X9400 V-730P305X9400 V-730P335X9400 V-730P395X9400 0.258 [6.6] 0.275 [7.0] 0.297 [7.5] 0.320 [8.1] 0.348 [8.8] 0.299 [7.6] 0.328 [8.3] 0.353 [9.0] 0.385 [9.8] 0.421 [10.7] 0.469 [11.9] 0.503 [12.8] 0.545 [13.8] 0.506 [12.9] 0.551 [14.0] 0.599 [15.2] 0.655 [16.6] 0.712 [18.1] 0.658 [16.7] 0.716 [18.2] 0.752 [19.1] 0.786 [20.0] 0.865 [22.0] 0.909 [23.1] 0.951 [24.2] 1.031 [26.2] 0.75 [19.0] 0.75 [19.0] 0.75 [19.0] 0.75 [19.0] 0.75 [19.0] 1.00 [25.4] 1.00 [25.4] 1.00 [25.4] 1.00 [25.4] 1.00 [25.4] 1.00 [25.4] 1.00 [25.4] 1.00 [25.4] 1.25 [31.8] 1.25 [31.8] 1.25 [31.8] 1.25 [31.8] 1.25 [31.8] 1.75 [44.5] 1.75 [44.5] 1.75 [44.5] 1.75 [44.5] 1.75 [44.5] 1.75 [44.5] 1.75 [44.5] 1.75 [44.5] 0.022 0.027 0.033 0.039 0.047 0.056 0.068 0.082 0.1 0.12 0.15 0.18 0.22 0.27 0.33 0.39 0.47 0.56 0.68 0.82 1.0 V-730P223X9630 V-730P273X9630 V-730P333X9630 V-730P393X9630 V-730P473X9630 V-730P563X9630 V-730P683X9630 V-730P823X9630 V-730P104X9630 V-730P124X9630 V-730P154X9630 V-730P184X9630 V-730P224X9630 V-730P274X9630 V-730P334X9630 V-730P394X9630 V-730P474X9630 V-730P564X9630 V-730P684X9630 V-730P824X9630 V-730P105X9630 0.283 [7.2] 0.307 [7.8] 0.334 [8.5] 0.358 [9.1] 0.388 [9.9] 0.418 [10.6] 0.346 [8.8] 0.374 [9.5] 0.408 [10.4] 0.443 [11.3] 0.496 [12.6] 0.538 [13.7] 0.496 [12.6] 0.542 [13.8] 0.593 [15.1] 0.639 [16.2] 0.696 [17.7] 0.608 [15.4] 0.664 [16.9] 0.724 [18.4] 0.794 [20.2] 0.75 [19.0] 0.75 [19.0] 0.75 [19.0] 0.75 [19.0] 0.75 [19.0] 0.75 [19.0] 1.00 [25.4] 1.00 [25.4] 1.00 [25.4] 1.00 [25.4] 1.00 [25.4] 1.00 [25.4] 1.25 [31.8] 1.25 [31.8] 1.25 [31.8] 1.25 [31.8] 1.25 [31.8] 1.75 [44.5] 1.75 [44.5] 1.75 [44.5] 1.75 [44.5] MAXIMUM RIPPLE CURRENT ESR (ARMS) at 20 kHz (m) 20 kHz to CASE TEMPERATURE (2) at 100 kHz + 25 C + 35 C + 45 C + 55 C + 65 C + 75 C + 85 C 400 WVDC 1.0 1.0 1.0 1.0 1.0 1.0 0.9 1.1 1.1 1.1 1.1 1.1 1.1 0.9 1.4 1.4 1.4 1.4 1.4 1.4 1.0 1.7 1.7 1.7 1.7 1.7 1.6 1.1 2.0 2.0 2.0 2.0 2.0 1.9 1.3 1.4 1.4 1.4 1.4 1.4 1.4 1.4 1.7 1.7 1.7 1.7 1.7 1.7 1.6 2.1 2.1 2.1 2.1 2.1 2.1 1.7 2.6 2.6 2.6 2.6 2.6 2.5 1.8 3.1 3.1 3.1 3.1 3.1 2.7 1.9 3.8 3.8 3.8 3.8 3.5 2.9 2.0 4.1 4.1 4.1 4.1 3.7 3.1 2.1 32.0 5.7 5.5 5.0 4.4 3.8 3.2 2.2 31.0 5.7 5.7 5.3 4.4 4.1 3.3 2.3 30.0 5.7 5.7 5.5 4.8 4.3 3.5 2.4 28.0 5.7 5.7 5.6 5.3 4.5 3.7 2.6 27.0 5.7 5.7 5.7 5.7 5.7 4.7 4.3 26.0 6.3 6.2 6.0 5.9 5.8 4.9 4.5 25.0 7.0 6.9 6.7 6.6 6.5 5.2 4.7 23.0 8.0 7.9 7.8 7.7 6.8 5.5 5.0 21.0 9.0 9.0 9.0 8.0 7.0 5.7 5.2 20.0 9.0 9.0 9.0 8.3 7.4 5.9 5.4 19.0 9.0 9.0 9.0 8.6 7.6 6.0 5.6 17.0 9.0 9.0 9.0 9.0 7.9 6.4 5.9 16.0 9.0 9.0 9.0 9.0 8.1 6.6 6.3 15.0 9.0 9.0 9.0 9.0 8.3 6.8 6.5 630 WVDC 0.8 0.8 0.8 0.8 0.8 0.8 0.8 1.0 1.0 1.0 1.0 1.0 1.0 0.9 1.2 1.2 1.2 1.2 1.2 1.2 1.0 1.4 1.4 1.4 1.4 1.4 1.4 1.0 1.7 1.7 1.7 1.7 1.7 1.6 1.1 2.1 2.1 2.1 2.1 2.1 1.7 1.2 1.3 1.3 1.3 1.3 1.3 1.3 1.3 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.9 1.9 1.9 1.9 1.9 1.9 1.6 2.3 2.3 2.3 2.3 2.3 2.3 1.8 2.9 2.9 2.9 2.9 2.9 2.9 1.9 3.5 3.5 3.5 3.5 3.5 2.7 1.9 2.8 2.8 2.8 2.8 2.8 2.8 2.3 3.5 3.5 3.5 3.5 3.5 3.3 2.3 4.3 4.3 4.3 4.3 4.3 3.5 2.4 5.0 5.0 5.0 5.0 4.6 3.7 2.5 28.0 6.8 6.3 5.8 5.2 4.5 3.6 2.6 26.0 7.4 6.9 6.3 5.6 4.8 4.0 2.8 25.0 7.8 7.2 6.6 5.9 5.1 4.2 2.9 22.0 8.1 7.5 6.9 6.2 5.3 4.3 3.1 18.0 8.6 7.9 7.3 6.5 5.6 4.6 3.6 Notes Other capacitance values and voltage ratings are available on request (1) Part Numbers listed are for a capacitance tolerance of 10 %. To specifiy 20 % tolerance, change the "X9" in the Part Number to "X0"; for 5 %, from "X9" to "X5". (2) The peak current pulse capability ot these capacitors is 10 A/F. The maximum rate voltage change is 10 V/s. ORDERING INFORMATION V-730P TYPE 224 CAPACITANCE This is expressed in picofarads. The first two digits are the significant figures. The third is the number of zeros to follow. X9 CAPACITANCE TOLERANCE X0 = 20 % X9 = 10 % X5 = 5 % Note (3) At + 85 C, AC RMS ratings for frequencies up to and including 400 Hz correspond to this table: WVDC 100 250 Rated RMS Volts 70 175 Document Number: 42092 Revision: 12-Mar-09 For technical questions, contact: spresale@vishay.com 100 DC VOLTAGE RATING (3) This is expressed in volts. 400 275 630 275 www.vishay.com 27 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1