Document Number: 42092 For technical questions, contact: spresale@vishay.com www.vishay.com
Revision: 12-Mar-09 25
Film Capacitors High Frequency, Wrap-and-Fill,
Metallized Polypropylene
V-730 P
Vishay Sprague
FEATURES
•Excellent AC performance
•Low power dissipation
•Low dielectric absorption
•Close tolerance
•High stability
•Compliant to RoHS directive 2002/95/EC
PERFORMANCE CHARACTERISTICS
Operating Temperature: - 55 °C to + 85 °C
Voltage Derating: At + 105 °C, 50 % of + 85 °C rating
ESR: 20 kHz to 100 kHz
Capacitance Range: 0.022 µF to 10.0 µF
Capactiance Tolerance: ± 20 %, ± 10 %, ± 5 %
DC Voltage Rating: 100 WVDC to 630 WVDC
AC Voltage Rating: 70 VRMS to 275 VRMS, 60 Hz to 400 Hz
Dissipation Factor: 0.1 % maximum
Measure all units at 1000 Hz, at + 25 °C
DC Voltage Test: 200 % of rated voltage for 2 min
AC Voltage Test: 130 % of rated RMS voltage at 60 Hz for
15 s
Insulation Resistance: Measured at 100 WVDC after a
2 min charge.
At + 25 °C: 200 000 MΩ/µF or 400 000 MΩ minimum
At + 85 °C: 10 000 MΩ/µF or 20 000 MΩ minimum
At + 105 °C: 1000 MΩ/µF or 2000 MΩ minimum
Vibration Test (Condition B): No mechanical damage,
short, open or intermittent circuits.
DC Life Test: 150 % of rated voltage for 1000 h at + 85 °C.
No open or short circuits. No visible damage.
Maximum Δ CAP ± 1.0 %
Minimum IR = 50 % of initial limit
Maximum DF = 0.12 %
Humidity Test: 95 % relative humidity at + 40 °C for 250 h.
No visible damage.
Maximum Δ CAP ± 1.0 %
Minimum IR = 20 % of initial limit
Maximum DF = 0.12 %
AC Life Test: 110 % of rated RMS voltage at 60 Hz for
1000 h at + 85 °C.
Maximum Δ CAP ± 5 %
Minimum IR = 50 % of initial limit
Maximum DF = 0.12 %
PHYSICAL CHARACTERISTICS
Lead Pull: 5 lb (2.3 kg) for one min. No physical damage.
Lead Bend: After three complete consecutive bends. No
damage.
Marking: Sprague® trademark, type or part number,
capacitance and voltage.
Note
(1) Leads to be within 0.062" [1.57 mm] of center line at egress but not less than 0.031" [0.79 mm] from edge.
DIMENSIONS in inches [millimeters]
L
± 0.062 [1.57]
1.750
[44.45]
Min.
Solid Tinned Wire (1)
0.032 [0.81] Nominal Dia.
(No. 20 AWG)
1.750
[44.45]
Min.
D
Max.
V-730 P
Vishay Sprague Film Capacitors High Frequency, Wrap-and-Fill,
Metallized Polypropylene
www.vishay.com For technical questions, contact: spresale@vishay.com Document Number: 42092
26 Revision: 12-Mar-09
Notes
Other capacitance values and voltage ratings are available upon request
(1) Part Numbers listed are for a capacitance tolerance of ± 10 %. To specifiy ± 20 % tolerance, change the “X9” in the Part Number to “X0”;
for ± 5 %, from “X9” to “X5”.
(2) The peak current pulse capability ot these capacitors is 10 A/µF. The maximum rate voltage change is 10 V/µs.
STANDARD RATINGS in inches [millimeters]
CAPACITANCE
(µF) PART NUMBER (1) CASE SIZE
ESR
(mΩ)
20 kHz
to
100 kHz
MAXIMUM RIPPLE CURRENT
(ARMS) at 20 kHz
CASE TEMPERATURE (2) at
D L + 25 °C + 35 °C + 45 °C + 55 °C + 65 °C + 75 °C + 85 °C
100 WVDC
0.22 V-730P224X9100 0.275 [7.0] 0.75 [19.0] - 2.3 2.3 2.3 2.3 2.3 1.8 1.0
0.27 V-730P274X9100 0.298 [7.6] 0.75 [19.0] - 2.6 2.6 2.6 2.6 2.4 1.9 1.1
0.33 V-730P334X9100 0.324 [8.2] 0.75 [19.0] - 2.8 2.8 2.8 2.8 2.6 2.2 1.2
0.39 V-730P394X9100 0.347 [8.8] 0.75 [19.0] - 3.1 3.1 3.1 3.1 2.9 2.3 1.3
0.47 V-730P474X9100 0.376 [9.6] 0.75 [19.0] 37.0 3.7 3.4 3.1 2.8 2.5 2.0 1.4
0.56 V-730P564X9100 0.321 [8.2] 1.00 [25.4] 35.0 3.9 3.6 3.3 2.9 2.6 2.1 1.5
0.68 V-730P684X9100 0.348 [8.8] 1.00 [25.4] 33.0 4.1 3.8 3.5 3.1 2.8 2.2 1.6
0.82 V-730P824X9100 0.377 [9.6] 1.00 [25.4] 31.0 4.3 4.0 3.6 3.2 2.9 2.3 1.7
1.0 V-730P105X9100 0.421 [10.7] 1.00 [25.4] 26.0 5.5 5.1 4.7 4.2 3.6 2.8 2.6
1.2 V-730P125X9100 0.454 [11.5] 1.00 [25.4] 24.0 5.7 5.3 4.9 4.4 3.8 3.0 2.8
1.5 V-730P155X9100 0.500 [12.7] 1.00 [25.4] 20.0 6.1 5.5 5.1 4.6 4.0 3.2 3.1
1.8 V-730P185X9100 0.541 [13.7] 1.00 [25.4] 19.0 6.3 5.7 5.3 4.8 4.1 3.4 3.0
2.0 V-730P205X9100 0.486 [12.3] 1.25 [31.8] 18.0 6.5 6.0 5.5 4.9 4.2 3.5 3.2
2.2 V-730P225X9100 0.507 [12.9] 1.25 [31.8] 18.0 6.8 6.3 5.7 5.1 4.4 3.6 3.3
2.7 V-730P275X9100 0.554 [14.1] 1.25 [31.8] 17.0 7.1 6.5 6.0 5.3 4.6 3.7 3.4
3.0 V-730P305X9100 0.581 [14.8] 1.25 [31.8] 16.0 7.3 6.7 6.2 5.5 4.8 3.9 3.5
3.3 V-730P335X9100 0.606 [15.4] 1.25 [31.8] 16.0 7.4 6.8 6.4 5.6 4.9 4.0 3.6
3.9 V-730P395X9100 0.654 [16.6] 1.25 [31.8] 15.0 7.6 6.9 6.6 5.8 5.1 4.1 3.7
4.0 V-730P405X9100 0.537 [13.6] 1.75 [44.5] 15.0 7.8 7.0 6.7 5.9 5.2 4.2 3.8
4.7 V-730P475X9100 0.577 [14.7] 1.75 [44.5] 15.0 8.1 7.4 6.8 6.0 5.3 4.3 3.9
5.0 V-730P505X9100 0.593 [15.1] 1.75 [44.5] 14.0 8.3 7.6 7.0 6.2 5.4 4.4 4.0
5.6 V-730P565X9100 0.624 [15.8] 1.75 [44.5] 14.0 8.4 7.7 7.1 6.4 5.5 4.5 4.1
6.0 V-730P605X9100 0.644 [16.4] 1.75 [44.5] 14.0 8.5 7.8 7.2 6.5 5.6 4.6 4.2
6.8 V-730P685X9100 0.682 [17.3] 1.75 [44.5] 13.0 8.5 8.0 7.4 6.7 5.7 4.7 4.3
8.0 V-730P805X9100 0.735 [18.7] 1.75 [44.5] 13.0 8.6 8.3 7.7 6.8 6.0 4.8 4.4
8.2 V-730P825X9100 0.743 [18.9] 1.75 [44.5] 13.0 8.8 8.6 8.0 7.0 6.1 4.9 4.5
10.0 V-730P106X9100 0.815 [20.7] 1.75 [44.5] 12.0 9.0 9.0 8.5 7.6 6.6 5.4 4.9
250 WVDC
0.1 V-730P104X9250 0.279 [7.1] 0.75 [19.0] - 1.5 1.5 1.5 1.5 1.5 1.5 0.9
0.12 V-730P124X9250 0.300 [7.6] 0.75 [19.0] - 1.9 1.9 1.9 1.9 1.9 1.7 1.1
0.15 V-730P154X9250 0.327 [8.3] 0.75 [19.0] - 2.3 2.3 2.3 2.3 2.3 1.9 1.1
0.18 V-730P184X9250 0.353 [9.0] 0.75 [19.0] - 2.7 2.7 2.7 2.7 2.5 2.0 1.2
0.22 V-730P224X9250 0.306 [7.8] 1.00 [25.4] - 1.9 1.9 1.9 1.9 1.9 1.9 1.3
0.27 V-730P274X9250 0.333 [8.5] 1.00 [25.4] - 2.4 2.4 2.4 2.4 2.4 2.2 1.4
0.33 V-730P334X9250 0.362 [9.2] 1.00 [25.4] - 2.9 2.9 2.9 2.9 2.9 2.3 1.5
0.39 V-730P394X9250 0.389 [9.9] 1.00 [25.4] - 3.4 3.4 3.4 3.2 2.9 2.3 1.6
0.47 V-730P474X9250 0.422 [10.7] 1.00 [25.4] 35.0 3.8 3.7 3.6 3.4 2.9 2.4 1.7
0.56 V-730P564X9250 0.464 [11.8] 1.00 [25.4] 33.0 3.9 3.8 3.7 3.5 3.1 2.5 1.8
0.68 V-730P684X9250 0.425 [10.8] 1.25 [31.8] 32.0 4.0 3.9 3.8 3.7 3.2 2.6 1.9
0.82 V-730P824X9250 0.471 [12.0] 1.25 [31.8] 31.0 4.2 4.1 4.0 3.9 3.4 2.8 2.0
1.0 V-730P105X9250 0.513 [13.0] 1.25 [31.8] 28.0 4.4 4.4 4.4 4.4 4.3 3.5 3.2
1.2 V-730P125X9250 0.554 [14.1] 1.25 [31.8] 27.0 4.7 4.6 4.5 5.0 4.5 3.7 3.3
1.5 V-730P155X9250 0.613 [15.6] 1.25 [31.8] 26.0 5.1 5.0 4.9 5.4 4.7 3.9 3.5
1.8 V-730P185X9250 0.667 [17.0] 1.25 [31.8] 25.0 5.9 5.8 5.7 5.7 5.0 4.1 3.7
2.0 V-730P205X9250 0.700 [17.8] 1.25 [31.8] 21.0 7.2 7.2 6.8 6.0 5.2 4.3 3.9
2.2 V-730P225X9250 0.610 [15.5] 1.75 [44.5] 20.0 8.4 7.5 7.0 6.3 5.4 4.5 4.1
2.7 V-730P275X9250 0.669 [17.0] 1.75 [44.5] 19.0 8.6 7.8 7.3 6.6 5.7 4.7 4.3
3.0 V-730P305X9250 0.703 [17.9] 1.75 [44.5] 18.0 9.0 8.3 7.6 6.8 5.9 4.8 4.4
3.3 V-730P335X9250 0.734 [18.6] 1.75 [44.5] 18.0 9.0 8.4 7.8 7.0 6.0 4.9 4.5
3.9 V-730P395X9250 0.794 [20.2] 1.75 [44.5] 17.0 9.0 8.5 8.0 7.2 6.2 5.0 4.6
4.0 V-730P405X9250 0.803 [20.4] 1.75 [44.5] 16.0 9.0 8.6 8.2 7.4 6.3 5.1 4.7
4.7 V-730P475X9250 0.866 [22.0] 1.75 [44.5] 16.0 9.0 8.8 8.5 7.7 6.6 5.3 4.9
5.0 V-730P505X9250 0.892 [22.7] 1.75 [44.5] 15.0 9.0 9.0 8.8 7.9 6.8 5.6 5.1
5.6 V-730P565X9250 0.941 [23.9] 1.75 [44.5] 15.0 9.0 9.0 8.9 8.0 7.0 5.8 5.3
6.0 V-730P605X9250 0.972 [24.7] 1.75 [44.5] 15.0 9.0 9.0 9.0 8.2 7.2 5.9 5.5
6.8 V-730P685X9250 0.882 [22.4] 2.25 [57.2] 15.0 9.0 9.0 9.0 8.4 7.4 6.0 5.6
8.0 V-730P805X9250 0.953 [24.2] 2.25 [57.2] 14.0 9.0 9.0 9.0 8.7 7.8 6.3 5.8
8.2 V-730P825X9250 0.964 [24.5] 2.25 [57.2] 14.0 9.0 9.0 9.0 8.8 7.9 6.4 5.9
10.0 V-730P106X9250 1.060 [26.9] 2.25 [57.2] 13.0 9.0 9.0 9.0 8.9 8.3 6.8 6.2
Document Number: 42092 For technical questions, contact: spresale@vishay.com www.vishay.com
Revision: 12-Mar-09 27
V-730 P
Film Capacitors High Frequency, Wrap-and-Fill,
Metallized Polypropylene Vishay Sprague
Notes
Other capacitance values and voltage ratings are available on request
(1) Part Numbers listed are for a capacitance tolerance of ± 10 %. To specifiy ± 20 % tolerance, change the “X9” in the Part Number to “X0”;
for ± 5 %, from “X9” to “X5”.
(2) The peak current pulse capability ot these capacitors is 10 A/µF. The maximum rate voltage change is 10 V/µs.
STANDARD RATINGS in inches [millimeters]
CAPACITANCE
(µF) PART NUMBER(1) CASE SIZE
ESR
(mΩ)
20 kHz to
100 kHz
MAXIMUM RIPPLE CURRENT
(ARMS) at 20 kHz
CASE TEMPERATURE (2) at
D L + 25 °C + 35 °C + 45 °C + 55 °C + 65 °C + 75 °C + 85 °C
400 WVDC
0.047 V-730P473X9400 0.258 [6.6] 0.75 [19.0] - 1.0 1.0 1.0 1.0 1.0 1.0 0.9
0.056 V-730P563X9400 0.275 [7.0] 0.75 [19.0] - 1.1 1.1 1.1 1.1 1.1 1.1 0.9
0.068 V-730P683X9400 0.297 [7.5] 0.75 [19.0] - 1.4 1.4 1.4 1.4 1.4 1.4 1.0
0.082 V-730P823X9400 0.320 [8.1] 0.75 [19.0] - 1.7 1.7 1.7 1.7 1.7 1.6 1.1
0.1 V-730P104X9400 0.348 [8.8] 0.75 [19.0] - 2.0 2.0 2.0 2.0 2.0 1.9 1.3
0.12 V-730P124X9400 0.299 [7.6] 1.00 [25.4] - 1.4 1.4 1.4 1.4 1.4 1.4 1.4
0.15* V-730P154X9400 0.328 [8.3] 1.00 [25.4] - 1.7 1.7 1.7 1.7 1.7 1.7 1.6
0.18 V-730P184X9400 0.353 [9.0] 1.00 [25.4] - 2.1 2.1 2.1 2.1 2.1 2.1 1.7
0.22 V-730P224X9400 0.385 [9.8] 1.00 [25.4] - 2.6 2.6 2.6 2.6 2.6 2.5 1.8
0.27 V-730P274X9400 0.421 [10.7] 1.00 [25.4] - 3.1 3.1 3.1 3.1 3.1 2.7 1.9
0.33 V-730P334X9400 0.469 [11.9] 1.00 [25.4] - 3.8 3.8 3.8 3.8 3.5 2.9 2.0
0.39 V-730P394X9400 0.503 [12.8] 1.00 [25.4] - 4.1 4.1 4.1 4.1 3.7 3.1 2.1
0.47 V-730P474X9400 0.545 [13.8] 1.00 [25.4] 32.0 5.7 5.5 5.0 4.4 3.8 3.2 2.2
0.56 V-730P564X9400 0.506 [12.9] 1.25 [31.8] 31.0 5.7 5.7 5.3 4.4 4.1 3.3 2.3
0.68 V-730P684X9400 0.551 [14.0] 1.25 [31.8] 30.0 5.7 5.7 5.5 4.8 4.3 3.5 2.4
0.82 V-730P824X9400 0.599 [15.2] 1.25 [31.8] 28.0 5.7 5.7 5.6 5.3 4.5 3.7 2.6
1.0 V-730P105X9400 0.655 [16.6] 1.25 [31.8] 27.0 5.7 5.7 5.7 5.7 5.7 4.7 4.3
1.2 V-730P125X9400 0.712 [18.1] 1.25 [31.8] 26.0 6.3 6.2 6.0 5.9 5.8 4.9 4.5
1.5 V-730P155X9400 0.658 [16.7] 1.75 [44.5] 25.0 7.0 6.9 6.7 6.6 6.5 5.2 4.7
1.8 V-730P185X9400 0.716 [18.2] 1.75 [44.5] 23.0 8.0 7.9 7.8 7.7 6.8 5.5 5.0
2.0 V-730P205X9400 0.752 [19.1] 1.75 [44.5] 21.0 9.0 9.0 9.0 8.0 7.0 5.7 5.2
2.2 V-730P225X9400 0.786 [20.0] 1.75 [44.5] 20.0 9.0 9.0 9.0 8.3 7.4 5.9 5.4
2.7 V-730P275X9400 0.865 [22.0] 1.75 [44.5] 19.0 9.0 9.0 9.0 8.6 7.6 6.0 5.6
3.0 V-730P305X9400 0.909 [23.1] 1.75 [44.5] 17.0 9.0 9.0 9.0 9.0 7.9 6.4 5.9
3.3 V-730P335X9400 0.951 [24.2] 1.75 [44.5] 16.0 9.0 9.0 9.0 9.0 8.1 6.6 6.3
3.9 V-730P395X9400 1.031 [26.2] 1.75 [44.5] 15.0 9.0 9.0 9.0 9.0 8.3 6.8 6.5
630 WVDC
0.022 V-730P223X9630 0.283 [7.2] 0.75 [19.0] - 0.8 0.8 0.8 0.8 0.8 0.8 0.8
0.027 V-730P273X9630 0.307 [7.8] 0.75 [19.0] - 1.0 1.0 1.0 1.0 1.0 1.0 0.9
0.033 V-730P333X9630 0.334 [8.5] 0.75 [19.0] - 1.2 1.2 1.2 1.2 1.2 1.2 1.0
0.039 V-730P393X9630 0.358 [9.1] 0.75 [19.0] - 1.4 1.4 1.4 1.4 1.4 1.4 1.0
0.047 V-730P473X9630 0.388 [9.9] 0.75 [19.0] - 1.7 1.7 1.7 1.7 1.7 1.6 1.1
0.056 V-730P563X9630 0.418 [10.6] 0.75 [19.0] - 2.1 2.1 2.1 2.1 2.1 1.7 1.2
0.068 V-730P683X9630 0.346 [8.8] 1.00 [25.4] - 1.3 1.3 1.3 1.3 1.3 1.3 1.3
0.082 V-730P823X9630 0.374 [9.5] 1.00 [25.4] - 1.6 1.6 1.6 1.6 1.6 1.6 1.6
0.1 V-730P104X9630 0.408 [10.4] 1.00 [25.4] - 1.9 1.9 1.9 1.9 1.9 1.9 1.6
0.12 V-730P124X9630 0.443 [11.3] 1.00 [25.4] - 2.3 2.3 2.3 2.3 2.3 2.3 1.8
0.15 V-730P154X9630 0.496 [12.6] 1.00 [25.4] - 2.9 2.9 2.9 2.9 2.9 2.9 1.9
0.18 V-730P184X9630 0.538 [13.7] 1.00 [25.4] - 3.5 3.5 3.5 3.5 3.5 2.7 1.9
0.22 V-730P224X9630 0.496 [12.6] 1.25 [31.8] - 2.8 2.8 2.8 2.8 2.8 2.8 2.3
0.27 V-730P274X9630 0.542 [13.8] 1.25 [31.8] - 3.5 3.5 3.5 3.5 3.5 3.3 2.3
0.33 V-730P334X9630 0.593 [15.1] 1.25 [31.8] - 4.3 4.3 4.3 4.3 4.3 3.5 2.4
0.39 V-730P394X9630 0.639 [16.2] 1.25 [31.8] - 5.0 5.0 5.0 5.0 4.6 3.7 2.5
0.47 V-730P474X9630 0.696 [17.7] 1.25 [31.8] 28.0 6.8 6.3 5.8 5.2 4.5 3.6 2.6
0.56 V-730P564X9630 0.608 [15.4] 1.75 [44.5] 26.0 7.4 6.9 6.3 5.6 4.8 4.0 2.8
0.68 V-730P684X9630 0.664 [16.9] 1.75 [44.5] 25.0 7.8 7.2 6.6 5.9 5.1 4.2 2.9
0.82 V-730P824X9630 0.724 [18.4] 1.75 [44.5] 22.0 8.1 7.5 6.9 6.2 5.3 4.3 3.1
1.0 V-730P105X9630 0.794 [20.2] 1.75 [44.5] 18.0 8.6 7.9 7.3 6.5 5.6 4.6 3.6
ORDERING INFORMATION
V-730P 224 X9 100
TYPE CAPACITANCE CAPACITANCE TOLERANCE DC VOLTAGE RATING (3)
This is expressed in picofarads. The first two
digits are the significant figures. The third is
the number of zeros to follow.
X0 = ± 20 %
X9 = ± 10 %
X5 = ± 5 %
This is expressed in volts.
Note (3) At + 85 °C, AC RMS ratings for frequencies up to and including 400 Hz correspond to this table:
WVDC 100 250 400 630
Rated RMS Volts 70 175 275 275
Document Number: 91000 www.vishay.com
Revision: 18-Jul-08 1
Disclaimer
Legal Disclaimer Notice
Vishay
All product specifications and data are subject to change without notice.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf
(collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein
or in any other disclosure relating to any product.
Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any
information provided herein to the maximum extent permitted by law. The product specifications do not expand or
otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed
therein, which apply to these products.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this
document or by any conduct of Vishay.
The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless
otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such
applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting
from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding
products designed for such applications.
Product names and markings noted herein may be trademarks of their respective owners.
