JIANGSU CHANGJIANG ELECTRONICS TECHNOLOGY CO., LTD Digital transistors (built-in resistors) DTC143EE/DTC143EUA/ DTC143ECA/DTC143EKA/DTC143ESA DIGITAL TRANSISTOR (NPN) Features 1) Built-in bias resistors enable the configuration of an inverter circuit without connecting external input resistors (see equivalent circuit). 2) The bias resistors consist of thin-film resistors with complete isolation to allow negative biasing of the input. They also have the advantage of almost completely eliminating parasitic effects. 3) Only the on/off conditions need to be set for operation, making device design easy. PIN CONNENCTIONS AND MARKING DTC143EE SOT-523 DTC143EUA Addreviated symbol: 23 SOT-323 Addreviated symbol: 23 DTA114ECA DTC143ECA DTC143EKA SOT-23 SOT-23-3L Addreviated symbol: 23 DTC143ESA TO-92S SOT-23 Addreviated symbol: 23 Absolute maximum ratings(Ta=25) Limits (DTC143E ) Parameter Symbol Supply voltage VCC 50 V Input voltage VIN -10~+30 V IO 100 IC(MAX) 100 Output current E UA KA 150 CA SA Unit mA Power dissipation Pd 200 300 mW Junction temperature Tj 150 Storage temperature Tstg -55~150 Electrical characteristics (Ta=25) Parameter Input voltage Symbol Min. Typ VI(off) Max. 0.5 3 VI(on) Unit V Conditions VCC=5V ,IO=100A VO=0.3V ,IO=20 mA Output voltage VO(on) 0.3 V IO/II=10mA/0.5mA Input current II 1.8 mA VI=5V Output current IO(off) 0.5 A VCC=50V ,VI=0 DC current gain GI 20 Input resistance R1 3.29 4.7 6.11 Resistance ratio R2/R1 0.8 1 1.2 Transition frequency fT Typical Characteristics VO=5V ,IO=10mA 250 K MHz VO=10V ,IO=5mA,f=100MHz