500 mW GLASS AXIAL-LEAD LOW NOISE
ZENER DIODES
Microsemi
Scottsdale Division
8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503
Page 1
Copyright 2003
11-05-2003 REV C
WWW.Microsemi .COM
SCOTTSDALE DIVISION
1N4099 thru 1N4135-1 and
1N4614 thru 1N4627-1 DO-35
1N4099 – 1N4135-1 &
1N4614 – 1N4627-1 (DO-35)
4135-1 &
1N4614 – 1N4627-1 (DO-35)
DESCRIPTION APPEARANCE
The popular 1N4099 thru 1N4135 and 1N4614 thru 1N4627 series of 0.5
watt Zener Voltage Regulators provides a selection from 1.8 to 100 volts in
standard 5% tolerances as well as tighter tolerances identified by different
suffix letters on the part number. These glass axial-leaded DO-35 Zeners
are also available with an internal-metallurgical-bond option by adding a “-1”
suffix. This type of bonded Zener package construction is also available in
JAN, JANTX, and JANTXV military qualifications. Microsemi also offers
numerous other Zener products to meet higher and lower power applications.
DO-35
(DO-204AH)
IMPORTANT: For the most current data, consult MICROSEMI’s website: http://www.microsemi.com
FEATURES APPLICATIONS / BENEFITS
• JEDEC registered 1N4099 thru 1N4135 and 1N4614
thru 1N4627 series
• Internal metallurgical bond option available by
adding a “-1” suffix
• Also available in JAN, JANTX, and JANTXV
qualifications per MIL-PRF-19500/435 by adding the
JAN, JANTX, or JANTXV prefixes to part numbers
for desired level of screening as well as –1” suffix;
(e.g. JANTX1N4099-1, JANTXV1N4109C-1, etc.)
• Military Surface Mount available in DO-213AA
package outline by adding a UR-1 suffix in addition
to the JAN, JANTX, and JANTXV prefix; e.g.
JANTX1N4099UR-1 (see separate data sheet)
• Commercial Surface Mount also available in
separate data sheet as 1N4099UR to 1N4135UR,
and 1N4614UR to 1N4627UR in DO-213AA
package (consult factory for others)
• DO-7 glass body axial-leaded Zener equivalents are
also available
• Regulates voltage over a broad operating
current and temperature range
• Extensive selection from 1.8 to 100 V
• Standard voltage tolerances are plus/minus 5%
with no suffix
• Tight tolerances available in plus or minus 2%
or 1% with C or D suffix respectively
• Flexible axial-lead mounting terminals
• Nonsensitive to ESD per MIL-STD-750 Method
1020
• Minimal capacitance (see Figure 3)
• Inherently radiation hard as described in
Microsemi MicroNote 050
MAXIMUM RATINGS MECHANICAL AND PACKAGING
• Operating and Storage temperature: -65ºC to
+175ºC
• Thermal Resistance: 250 ºC/W junction to lead at
3/8 (10 mm) lead length from body, or 310ºC/W
junction to ambient when mounted on FR4 PC board
(1 oz Cu) with 4 mm2 copper pads and track width 1
mm, length 25 mm
• Steady-State Power: 0.5 watts at TL < 50oC 3/8 inch
(10 mm) from body or 0.48 W at TA < 25ºC when
mounted on FR4 PC board as described for thermal
resistance above (see Figure 2 for derating)
• Forward voltage @200 mA: 1.1 volts
• Solder Temperatures: 260 ºC for 10 s (max)
• CASE: Hermetically sealed axial-lead glass
DO-35 (DO-204AH) package
• TERMINALS: Leads, tin-lead plated solderable
per MIL-STD-750, method 2026
• POLARITY: Cathode indicated by band where
diode is to be operated with the banded end
positive with respect to the opposite end for Zener
regulation
• MARKING: Part number
• TAPE & REEL option: Standard per EIA-296
(add “TR” suffix to part number)
• WEIGHT: 0.2 grams
• See package dimensions on last page