Doc No. TT4-EA-12738 Revision. 2 Product Standards Zener Diode DE5S062D0R DE5S062D0R Silicon epitaxial planar type Unit: mm For ESD protection DE3S062D in SSMini5 type package 1.6 0.2 Features 5 0.13 4 1.2 1.6 High ESD Halogen-free / RoHS compliant (EU RoHS / UL-94 V-0 / MSL:Level 1 compliant) 1 Marking Symbol:41 2 3 (0.6) (0.5) (0.5) 1.0 Basic Part Number : Dual DE3S062D (Common anode) Packaging Embossed type (Thermo-compression sealing) 8 000 pcs / reel (standard) Absolute Maximum Ratings Ta = 25 C Parameter Symbol *1 PT ESD Tj Topr Tstg Total power dissipation Electrostatic discharge *2 Junction temperature Operating ambient temperature Storage temperature Rating Unit 150 30 150 -40 to +85 -55 to +150 mW kV C C C Note) *1: PT = 150 mW achieved with a printed circuit board. (4 Diode total) *2: Test method:IEC61000_4_2(C = 150 pF,R = 330 , Contact discharge:10 times) 4 Cathode3 1. Cathode1 2. Anode1,2,3,4 5. Cathode4 3. Cathode2 Panasonic JEITA Code SSMini5-F4-B SC-107BB SOT-665 Internal Connection 5 1 Electrical Characteristics Ta = 25 C 3 C Parameter Symbol Zener voltage *1, *2 Reverse current Terminal Capacitance Temperature coefficient of zener voltage *3 VZ IR Ct SZ Conditions IZ = 1 mA VR = 4 V VR = 0 V, IZ = 1 mA f = 1 MHz 4 2 3 Min Typ Max 5.89 6.51 1.0 55 2.3 Unit V A pF mV/C Note) 1. Measuring methods are based on JAPANESE INDUSTRIAL STANDARD JIS C 7031 Measuring methods for Diodes. 2. *1: The temperature must be controlled 25C for VZ mesurement. VZ value measured at other temperature must be adjusted to VZ (25C) *2: VZ guaranted 20 ms after current flow. *3: Tj = 25C to 150C Page 1 of 3 Established : 2010-09-01 Revised : 2013-10-28 Doc No. TT4-EA-12738 Revision. 2 Product Standards Zener Diode DE5S062D0R Technical Data ( reference ) PT - Ta IF - VF 1.E+00 Mounted on print board. (4 diode total) Forward current IF (A) Total power dissipation PT (mW) 200 150 100 50 20 40 60 1.E-02 1.E-03 1.E-04 1.E-05 1.E-06 0.0 0 0 Ta = 25 1.E-01 80 100 120 140 160 180 200 0.2 0.4 0.6 0.8 1.0 1.2 Forward voltage VF (V) Ambient temperature Ta (C) IR - VR IZ - VZ 1.E-06 1.E-01 Ta = 25 Zener current IZ (A) 1.E-02 25 1.E-03 Reverse current IR (A) 1.E-07 Ta = 125 85 -40 1.E-04 1.E-05 1.E-08 1.E-09 1.E-10 1.E-11 1.E-06 1.E-12 0 2 4 6 8 10 0 12 1 3 4 Ct - VR SZ - IZ 80 5 Ta = 25 f = 1 MHz 70 3 Terminal capacitance Ct (pF) Temparature coefficient of zener voltage SZ (mV/C) 2 Reverse voltage VR (V) Zener voltage VZ (V) 1 -1 -3 60 50 40 30 20 10 -5 0 0 2 4 6 Zener current IZ (mA) 8 10 0 1 2 3 4 5 Reverse voltage VR (V) Page 2 of 3 Established : 2010-09-01 Revised : 2013-10-28 Doc No. TT4-EA-12738 Revision. 2 Product Standards Zener Diode DE5S062D0R SSMini5-F4-B Unit: mm 1.600.05 +0.05 0.13-0.02 +0.05 0.20-0.02 (5) 1.200.05 2 3 (0.5) (0.5) 0 to 0.05 (5) (0.27) 0.550.05 1.000.05 0.200.05 1 1.600.05 4 5 Land Pattern (Reference) (Unit: mm) 1.6 0.4 0.35 0.5 0.5 Page 3 of 3 Established : 2010-09-01 Revised : 2013-10-28 Request for your special attention and precautions in using the technical information and semiconductors described in this book (1) If any of the products or technical information described in this book is to be exported or provided to non-residents, the laws and regulations of the exporting country, especially, those with regard to security export control, must be observed. (2) The technical information described in this book is intended only to show the main characteristics and application circuit examples of the products. No license is granted in and to any intellectual property right or other right owned by Panasonic Corporation or any other company. Therefore, no responsibility is assumed by our company as to the infringement upon any such right owned by any other company which may arise as a result of the use of technical information described in this book. (3) The products described in this book are intended to be used for general applications (such as office equipment, communications equipment, measuring instruments and household appliances), or for specific applications as expressly stated in this book. Consult our sales staff in advance for information on the following applications: - Special applications (such as for airplanes, aerospace, automotive equipment, traffic signaling equipment, combustion equipment, life support systems and safety devices) in which exceptional quality and reliability are required, or if the failure or malfunction of the products may directly jeopardize life or harm the human body. It is to be understood that our company shall not be held responsible for any damage incurred as a result of or in connection with your using the products described in this book for any special application, unless our company agrees to your using the products in this book for any special application. (4) The products and product specifications described in this book are subject to change without notice for modification and/or improvement. At the final stage of your design, purchasing, or use of the products, therefore, ask for the most up-to-date Product Standards in advance to make sure that the latest specifications satisfy your requirements. (5) When designing your equipment, comply with the range of absolute maximum rating and the guaranteed operating conditions (operating power supply voltage and operating environment etc.). Especially, please be careful not to exceed the range of absolute maximum rating on the transient state, such as power-on, power-off and mode-switching. Otherwise, we will not be liable for any defect which may arise later in your equipment. Even when the products are used within the guaranteed values, take into the consideration of incidence of break down and failure mode, possible to occur to semiconductor products. Measures on the systems such as redundant design, arresting the spread of fire or preventing glitch are recommended in order to prevent physical injury, fire, social damages, for example, by using the products. (6) Comply with the instructions for use in order to prevent breakdown and characteristics change due to external factors (ESD, EOS, thermal stress and mechanical stress) at the time of handling, mounting or at customer's process. When using products for which damp-proof packing is required, satisfy the conditions, such as shelf life and the elapsed time since first opening the packages. (7) This book may be not reprinted or reproduced whether wholly or partially, without the prior written permission of our company. 20100202 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Panasonic: DE5S062D0R