3.3V CMOS Oscillator Mil Temp MCSO1V & MCSO1HV Specifications MCSO1V: 400kHz ~ 20.0MHz MCSO1HV: 20.0 ~ 160MHz Product Parameters MCSO1V MCSO1HV Frequency range: 400kHz ~ 20.0MHz 20.0 ~ 160MHz 7.86 0.20 2.00 0.20 1 ACTUAL SIZE PAD CONNECTION 1 Not connected or Enable/Disable 2 Ground 3 Output 4 Supply 2 4 2.12 3 1.16 4 1 1.00 3 2.10 2.54 2 3.18 2.12 2.54 TOP VIEW Scale 3:1 Features Military temperature range option Excellent shock & vibration resistance T specify Operating temperature range: 0 to +70C -40 to +85C -55 to +125C A B C Operable temperature range: -55 to +125C Storage temperature range: -65 to +125C Supply voltage (VDD): +3.3V (10%) Supply current (max): 10mA 30mA CMOS Logic levels: `0' level = +0.4V max `1' level = 90%VDD min Start up time: 5ms max Waveform symmetry: 40:60 max @ 50%VDD Rise / fall times: Frequencies in MHz 10.00000* 10.15000* 10.23000* 10.24000* 11.05920* 12.00000* 12.28800* 12.80000* 13.00000* 14.74560* 16.00000* 16.38400* 18.43200* 19.20000* 19.66080* 20.00000* 40.00000 40.60000 40.96000 44.23680 48.00000 49.15200 50.00000 50.75000 51.15000 51.20000 52.00000 55.29600 58.98240 60.00000 60.90000 61.38000 61.44000 64.00000 65.00000 65.53600 66.35520 72.00000 73.72800 76.80000 78.00000 80.00000 81.20000 81.84000 81.92000 88.47360 90.00000 96.00000 98.30400 100.00000 102.40000 104.00000 108.00000 110.59200 117.96400 120.00000 125.00000 128.00000 131.07200 132.71040 144.00000 150.00000 160.00000 Enable / Disable Function Open `1' level `0' level Tel: +44 1460 256 100 Output (pad 3) Shock resistance: 5,000G, 0.3ms, 1/2 sine Vibration resistance: 10G rms 10.0 ~ 2,000Hz Soldering condition: 260C, 10 sec max E Standard. Optional - Please specify required code(s) when ordering * Frequency stability is inclusive of calibration @ 25C, operating temperature range, supply voltage change, load change and ageing over 10 years. Ordering Information Packed in trays (91pcs/tray). Enabled Enabled High Impedance Fax: +44 1460 256 101 Product name + option codes (if any) + frequency eg: MCSO1V/TBE 16.0MHz 50ppm -40 to +85C Enable / disable MCSO1HV/C 81.840MHz 100ppm -55 to +125C Option code X (eg MCSO1V/X) denotes a custom specification. * Binary divisions of the above frequencies also available. Input (pad 1) 7ns max 3ns max Enable / disable function: None (pad 1 NC) Tristate* (control via pad 1) * not available under 500kHz Standard Frequencies 17 May 2011 Driving ability: Enable / disable tristate option (> 500kHz) Ceramic package with metal lid 100ppm 50ppm tighter stabilities on request Frequency stability*: 3.60 0.20 Option Codes E-mail: sales@golledge.com Web: www.golledge.com