T15 T15 SERIES SWITCHES 15A HIGH SNAP SWITCHES TOGGLE, ROCKER AND PUSH-BUTTON TYPES * Panel-sealed type Entry of water, oil, dust and gas from the front of the panel is prevented. (Panel front: IP67*; Inside of panel: IP40) 12 dia. Angled hole Toggle Rocker Pushbutton 3. Rubber cap also available in silicon type for excellent weather resistance. * 5 colors available so you can distinguish switches by purpose. <Example> Black: For main power supply Grey: For setting and switching Red: For resetting * With a usable ambient temperature range of -25C to +85C, use is possible in environments that require resistance against heat and cold. Prevention of water, oil, dust, and gases from entering through the panel with O-rings Compliance with RoHS Directive PRECAUTIONS WHEN USING CADMIUM-FREE CONTACT TYPE * Terminal-sealed type Both switch body and terminals have been sealed to protect from dust and gas that enters from the panel. (Panel front: IP67*; Inside of panel: IP60) Models with cadmium-free contacts have been introduced in order to reduce environmentally harmful substances. ("F" is affixed to the end of the part number.) We ask customers who are currently using products with cadmium-containing contacts (no "F" at the end of the part number) to please make the switch to models with cadmium-free contacts. When switching, operating life may differ depending on the load. Please be sure to verify this by conducting an evaluation using actual equipment. Sealing the joint part of switch body with packing rubber. Terminal area is sealed with epoxy resin. * Wire lead type Furthermore, a cover is provided for the terminals to keep out water and oil that enters from the panel. (Panel front: IP67*; Inside of panel: IP67) FEATURES 1. Series now includes rocker and push-button switches. Based on the well-established T-15 Series switch, the mechanism is kept as is and a rocker type and push-button type have been added to the series. (Note that the push-button type is rated at 10 A.) 2. Sealed type added for use in different environments. Packing is used where parts join and an O-ring is used to seal moving parts. New to the series, this type can be used in harsh environments such as those with water, oil, dust, and gas. Sealing with a cover and epoxy resin. Remark: The asterisk in "Panel front: IP67*" means this only applies to toggle and push-button types. The panel surface for the rocker type is IP64. Please see NOTES 1 and 2 regarding use of the sealed type. ASSORTMENT Sealed type Kind of actuator Standard type Panelsealed type Terminalsealed type Number of pole Wire leads type 1P 2P 3P Shape of terminal 4P Available*1 Available*1 Solder terminal Screw terminal .250 Quickconnect Wire lead terminal Available*1 Available*2 Toggle type Available Available Available Available Available Available Available Available Rocker type Available Available Available Available Available Available -- -- Available Available -- Available*2 Push-button type Available Available -- -- Available Available -- -- Available Available -- -- Remarks: *1: Only standard type *2: Only wire leads type All Rights Reserved (c) COPYRIGHT Panasonic Electric Works Co., Ltd. T15 TOGGLE PRODUCT TYPES 1. Standard type 1) Solder terminal and .250 Quick-connect terminal Number of poles 1-pole 2-pole 3-pole 4-pole Kind of operation < >: Momentary position ON-OFF ON-ON ON-OFF-ON ON-<ON> <ON>-OFF-<ON> ON-OFF-<ON> ON-OFF ON-ON ON-OFF-ON ON-<ON> <ON>-OFF-<ON> ON-OFF-<ON> ON-OFF ON-ON ON-OFF-ON ON-OFF ON-ON ON-OFF-ON Solder terminal Product No. T115A-F T115D-F T115E-F T115F-F T115G-F T115H-F T215K-F T215N-F T215P-F T215R-F T215S-F T215T-F T315K-F T315N-F T315P-F T415K-F T415N-F T415P-F 250 Quick-connect terminal Product No. T115A-AF T115D-AF T115E-AF T115F-AF T115G-AF T115H-AF T215K-AF T215N-AF T215P-AF T215R-AF T215S-AF T215T-AF T315K-AF T315N-AF T315P-AF T415K-AF T415N-AF T415P-AF 2) Screw terminal Number of poles 1-pole 2-pole 3-pole 4-pole Kind of operation < >: Momentary position ON-OFF ON-ON ON-OFF-ON ON-<ON> <ON>-OFF-<ON> ON-OFF-<ON> ON-OFF ON-ON ON-OFF-ON ON-<ON> <ON>-OFF-<ON> ON-OFF-<ON> ON-OFF ON-ON ON-OFF-ON ON-OFF ON-ON ON-OFF-ON Screw terminal Product No. T115A-SF T115D-SF T115E-SF T115F-SF T115G-SF T115H-SF T215K-SF T215N-SF T215P-SF T215R-SF T215S-SF T215T-SF T315K-SF T315N-SF T315P-SF T415K-SF T415N-SF T415P-SF Remarks: 1. Standard installation accessories are included with the product. 2. For UL/C-UL certified products, please add "UL" before "F" at the end of part number when ordering. All Rights Reserved (c) COPYRIGHT Panasonic Electric Works Co., Ltd. T15 2. Panel-sealed type 1) Solder terminal Number of poles Kind of operation < >: Momentary position ON-OFF ON-ON ON-OFF-ON ON-<ON> <ON>-OFF-<ON> ON-OFF-<ON> ON-OFF ON-ON ON-OFF-ON ON-<ON> <ON>-OFF-<ON> ON-OFF-<ON> 1-pole 2-pole Solder terminal Product No. TP115A-F TP115D-F TP115E-F TP115F-F TP115G-F TP115H-F TP215K-F TP215N-F TP215P-F TP215R-F TP215S-F TP215T-F 2) Screw terminal Number of poles Kind of operation < >: Momentary position ON-OFF ON-ON ON-OFF-ON ON-<ON> <ON>-OFF-<ON> ON-OFF-<ON> ON-OFF ON-ON ON-OFF-ON ON-<ON> <ON>-OFF-<ON> ON-OFF-<ON> 1-pole 2-pole Screw terminal Product No. TP115A-SF TP115D-SF TP115E-SF TP115F-SF TP115G-SF TP115H-SF TP215K-SF TP215N-SF TP215P-SF TP215R-SF TP215S-SF TP215T-SF Remarks: 1. Of the standard installation accessories that come with the product, the front hex nut and lock washer are included. 2. For UL/C-UL certified products, please add "UL" before "F" at the end of part number when ordering. 3. Terminal-sealed type 1) Solder terminal Number of poles 1-pole 2-pole Kind of operation < >: Momentary position ON-OFF ON-ON ON-OFF-ON ON-<ON> <ON>-OFF-<ON> ON-OFF-<ON> ON-OFF ON-ON ON-OFF-ON ON-<ON> <ON>-OFF-<ON> ON-OFF-<ON> Solder terminal Product No. TD115A-F TD115D-F TD115E-F TD115F-F TD115G-F TD115H-F TD215K-F TD215N-F TD215P-F TD215R-F TD215S-F TD215T-F Remarks: 1. Of the standard installation accessories that come with the product, the front hex nut and lock washer are included. 2. For UL/C-UL certified products, please add "UL" before "F" at the end of part number when ordering. All Rights Reserved (c) COPYRIGHT Panasonic Electric Works Co., Ltd. T15 2) Screw terminal Screw terminal Product No. TD115A-SF TD115D-SF TD115E-SF TD115F-SF TD115G-SF TD115H-SF TD215K-SF TD215N-SF TD215P-SF TD215R-SF TD215S-SF TD215T-SF Kind of operation < >: Momentary position Number of poles ON-OFF ON-ON ON-OFF-ON ON-<ON> <ON>-OFF-<ON> ON-OFF-<ON> ON-OFF ON-ON ON-OFF-ON ON-<ON> <ON>-OFF-<ON> ON-OFF-<ON> 1-pole 2-pole Remarks: 1. Of the standard installation accessories that come with the product, the front hex nut and lock washer are included. 2. For UL/C-UL certified products, please add "UL" before "F" at the end of part number when ordering. 4. Wire lead type Wire lead type Product No. TC115A-F TC115D-F TC115E-F TC115F-F TC115G-F TC115H-F TC215K-F TC215N-F TC215P-F TC215R-F TC215S-F TC215T-F Kind of operation < >: Momentary position Number of poles ON-OFF ON-ON ON-OFF-ON ON-<ON> <ON>-OFF-<ON> ON-OFF-<ON> ON-OFF ON-ON ON-OFF-ON ON-<ON> <ON>-OFF-<ON> ON-OFF-<ON> 1-pole 2-pole Remarks: 1. Standard installation accessories are included with the product. 2. 600 V vinyl wire (VSF, thick: 2 mm2, length: 200 mm) is used. Please inquire about type and different length of lead wire. 3. For UL/C-UL certified products, please add "UL" before "F" at the end of part number when ordering. 5. Accessories 1) Installation accessories (Repair parts) Standard installation accessories Product name Front hex nut (Nickel plated) Back hex nut (Uni-chrome plated) M12 x 1 Dimensions (mm) M12 x 1 (16.17) Keying washer Lock washer 1 18.2 dia. 12.3 dia. M12 x 1 (16.17) 9.7 14 Part No. Optional installation accessories Front Knurl nut (Nickel plated) 2.3 14 AJ3081 AJ3082 2.3 2.8 2.4 AJ3083 12.3 dia. 15.6 dia. 0.5 1 AJ3084 Remark: A selling unit of each accessory is 10 pieces. * Using the different rubber caps We recommend silicon rubber and EP rubber caps for the following applications. 2) EP rubber type 1) Silicon rubber caps When cost is the primary consideration. * When it is necessary to differentiate by color. * When using in applications that require resistance to heat and cold. Ambient temperature: -25C to +85C (EP rubber type is 0C to +40C.) * When compactness is required. All Rights Reserved (c) COPYRIGHT Panasonic Electric Works Co., Ltd. 15 dia. 2.4 AJ3080 T15 2) Accessories (Option) Product name Indication plate (aluminum)*3 ON-OFF ON-ON 12.3 dia. Rubber cap*1, 2, 4 EP rubber type Silicone rubber type 12.3 dia. 8 dia. 10 dia. Dimensions (mm) 1.3 30 0.8 24.5 1.5 0.8 Part No. 1.3 30 1.5 16 17 0.8 WD1901 16 17 WD1902 24.5 8.6 7 0.8 M12 M12 18 dia. 21 dia. WD1911 WD1811* Remarks: 1. The asterisk in the part number WD1811* for the silicon rubber type rubber cap is where the letter representing the color should be inserted. (B: black; R: red; Z: grey; Y: yellow; G: green.) 2. EP rubber cap is available in black only. 3. Letters on the display panel are aluminum colored and the area surrounding the letters is black. 4. Indication plate and rubber cap are compatible with the J4 switch, T-15 series switch, T-10 series switch, and T-03/T-06 series switches (when plate thickness is 2.7 mm or less). ROCKER PRODUCT TYPES 1. Standard type 1) Solder terminal, without indication on actuator Number of poles 1-pole 2-pole Kind of operation < >: Momentary position ON-OFF ON-ON ON-OFF-ON ON-<ON> <ON>-OFF-<ON> ON-OFF-<ON> ON-OFF ON-ON ON-OFF-ON ON-<ON> <ON>-OFF-<ON> ON-OFF-<ON> Solder terminal Product No. TR115A-F TR115D-F TR115E-F TR115F-F TR115G-F TR115H-F TR215K-F TR215N-F TR215P-F TR215R-F TR215S-F TR215T-F 2) Screw terminal, without indication on actuator Number of poles 1-pole 2-pole Kind of operation < >: Momentary position ON-OFF ON-ON ON-OFF-ON ON-<ON> <ON>-OFF-<ON> ON-OFF-<ON> ON-OFF ON-ON ON-OFF-ON ON-<ON> <ON>-OFF-<ON> ON-OFF-<ON> Screw terminal Product No. TR115A-SF TR115D-SF TR115E-SF TR115F-SF TR115G-SF TR115H-SF TR215K-SF TR215N-SF TR215P-SF TR215R-SF TR215S-SF TR215T-SF 3) Solder terminal, with ON-OFF indication on actuator Number of poles Kind of operation < >: Momentary position 1-pole 2-pole ON-OFF ON-OFF Solder terminal Product No. TR115A-F TR215K-F Remark: For UL/C-UL certified products, please add "UL" before "F" at the end of part number when ordering. All Rights Reserved (c) COPYRIGHT Panasonic Electric Works Co., Ltd. T15 4) Screw terminal, with ON-OFF indication on actuator Number of poles Kind of operation < >: Momentary position 1-pole 2-pole ON-OFF ON-OFF Screw terminal Product No. TR115A-SF TR215K-SF Remarks: 1. Please specify the actuator color by replacing the asterisk in the product number and part number with appropriate letter. B: black; W: white; R: red; Z: dark grey 2. For UL/C-UL certified products, please add "UL" before "F" at the end of part number when ordering. 2. Panel-sealed type 1) Solder terminal, without indication on actuator Number of poles 1-pole 2-pole Kind of operation < >: Momentary position ON-OFF ON-ON ON-OFF-ON ON-<ON> <ON>-OFF-<ON> ON-OFF-<ON> ON-OFF ON-ON ON-OFF-ON ON-<ON> <ON>-OFF-<ON> ON-OFF-<ON> Solder terminal Product No. TRP115A-F TRP115D-F TRP115E-F TRP115F-F TRP115G-F TRP115H-F TRP215K-F TRP215N-F TRP215P-F TRP215R-F TRP215S-F TRP215T-F 2) Screw terminal, without indication on actuator Number of poles 1-pole 2-pole Kind of operation < >: Momentary position ON-OFF ON-ON ON-OFF-ON ON-<ON> <ON>-OFF-<ON> ON-OFF-<ON> ON-OFF ON-ON ON-OFF-ON ON-<ON> <ON>-OFF-<ON> ON-OFF-<ON> Screw terminal Product No. TRP115A-SF TRP115D-SF TRP115E-SF TRP115F-SF TRP115G-SF TRP115H-SF TRP215K-SF TRP215N-SF TRP215P-SF TRP215R-SF TRP215S-SF TRP215T-SF 3) Solder terminal, with ON-OFF indication on actuator Number of poles Kind of operation < >: Momentary position 1-pole 2-pole ON-OFF ON-OFF Solder terminal Product No. TRP115A-F TRP215K-F 4) Screw terminal, with ON-OFF indication on actuator Number of poles Kind of operation < >: Momentary position 1-pole 2-pole ON-OFF ON-OFF Screw terminal Product No. TRP115A-SF TRP215K-SF Remarks: 1. Please specify the actuator color by replacing the asterisk in the product number and part number with appropriate letter. B: black; W: white; R: red; Z: dark grey 2. For UL/C-UL certified products, please add "UL" before "F" at the end of part number when ordering. 102 All Rights Reserved (c) COPYRIGHT Panasonic Electric Works Co., Ltd. T15 3. Terminal-sealed type 1) Solder terminal, without indication on actuator Number of poles 1-pole 2-pole Kind of operation < >: Momentary position ON-OFF ON-ON ON-OFF-ON ON-<ON> <ON>-OFF-<ON> ON-OFF-<ON> ON-OFF ON-ON ON-OFF-ON ON-<ON> <ON>-OFF-<ON> ON-OFF-<ON> Solder terminal Product No. TRD115A-F TRD115D-F TRD115E-F TRD115F-F TRD115G-F TRD115H-F TRD215K-F TRD215N-F TRD215P-F TRD215R-F TRD215S-F TRD215T-F 2) Screw terminal, without indication on actuator Number of poles 1-pole 2-pole Kind of operation < >: Momentary position ON-OFF ON-ON ON-OFF-ON ON-<ON> <ON>-OFF-<ON> ON-OFF-<ON> ON-OFF ON-ON ON-OFF-ON ON-<ON> <ON>-OFF-<ON> ON-OFF-<ON> Screw terminal Product No. TRD115A-SF TRD115D-SF TRD115E-SF TRD115F-SF TRD115G-SF TRD115H-SF TRD215K-SF TRD215N-SF TRD215P-SF TRD215R-SF TRD215S-SF TRD215T-SF 3) Solder terminal, with ON-OFF indication on actuator Number of poles Kind of operation < >: Momentary position 1-pole 2-pole ON-OFF ON-OFF Solder terminal Product No. TRD115A-F TRD215K-F 4) Screw terminal, with ON-OFF indication on actuator Number of poles Kind of operation < >: Momentary position 1-pole 2-pole ON-OFF ON-OFF Screw terminal Product No. TRD115A-SF TRD215K-SF Remarks: 1. Please specify the actuator color by replacing the asterisk in the product number and part number with appropriate letter. B: black; W: white; R: red; Z: dark grey 2. For UL/C-UL certified products, please add "UL" before "F" at the end of part number when ordering. All Rights Reserved (c) COPYRIGHT Panasonic Electric Works Co., Ltd. T15 4. Wire lead type 1) Without indication on actuator Number of poles 1-pole 2-pole Wire lead type Product No. TRC115A-F TRC115D-F TRC115E-F TRC115F-F TRC115G-F TRC115H-F TRC215K-F TRC215N-F TRC215P-F TRC215R-F TRC215S-F TRC215T-F Kind of operation < >: Momentary position ON-OFF ON-ON ON-OFF-ON ON-<ON> <ON>-OFF-<ON> ON-OFF-<ON> ON-OFF ON-ON ON-OFF-ON ON-<ON> <ON>-OFF-<ON> ON-OFF-<ON> 2) With ON-OFF indication on actuator Number of poles Kind of operation < >: Momentary position 1-pole 2-pole ON-OFF ON-OFF Wire lead type Product No. TRC115A-F TRC215K-F Remarks: 1. Please specify the actuator color by replacing the asterisk in the product number and part number with appropriate letter. B: black; W: white; R: red; Z: dark grey 2. 600 V vinyl wire (VSF, thick: 2 mm2, length: 200 mm) is used. Please inquire about type and different length of lead wire. 3. For UL/C-UL certified products, please add "UL" before "F" at the end of part number when ordering. PUSH-BUTTON PRODUCT TYPES 1. Standard type 1) Solder terminal Number of poles 1-pole 2-pole Solder terminal Product No. TB110F-F TB115D-F TB210R-F TB215N-F Kind of operation Momentary Alternate Momentary Alternate 2) Screw terminal Number of poles 1-pole 2-pole Screw terminal Product No. TB110F-SF TB115D-SF TB210R-SF TB215N-SF Kind of operation Momentary Alternate Momentary Alternate Remarks: 1. Please use switch body with a color cap (sold separately). 2. Standard installation accessories are included with the product. 3. For UL/C-UL certified products, please add "UL" before "F" at the end of part number when ordering. Switch body Color cap (sold separately) With color cap installed All Rights Reserved (c) COPYRIGHT Panasonic Electric Works Co., Ltd. T15 2. Panel-sealed type 1) Solder terminal Number of poles Solder terminal Product No. TBP110F-F TBP115D-F TBP210R-F TBP215N-F Kind of operation Momentary Alternate Momentary Alternate 1-pole 2-pole 2) Screw terminal Number of poles Screw terminal Product No. TBP110F-SF TBP115D-SF TBP210R-SF TBP215N-SF Kind of operation Momentary Alternate Momentary Alternate 1-pole 2-pole Remarks: 1. Please use switch body with a color cap (sold separately). 2. Standard installation accessories are included with the product. 3. For UL/C-UL certified products, please add "UL" before "F" at the end of part number when ordering. Color cap (sold separately) Switch body With color cap installed 3. Color cap for push-button (Option) Product name Color cap (sold separately) 13.2 dia. Dimensions (mm) 11.2 Part No. Remark: Please specify the color cap color by replacing the asterisk in the part number with appropriate letter (B: black; W: white; R: red; Z: dark grey; H: light grey; Y: yellow; G: green; L: blue). WDB1821 4. Installation accessories (Repair parts) Standard installation accessories Product name Front hex nut (Nickel plated) Back hex nut (Uni-chrome plated) M12 x 1 Dimensions (mm) (16.17) M12 x 1 Keying washer Lock washer 1 18.2 dia. 12.3 dia. M12 x 1 (16.17) 9.7 2.3 14 Part No. Standard installation accessories Front Knurl nut (Nickel plated) AJ3081 14 AJ3082 2.3 2.8 2.4 AJ3083 12.3 dia. 15.6 dia. AJ3084 Remark: A selling unit of each accessory is 10 pieces. All Rights Reserved (c) COPYRIGHT Panasonic Electric Works Co., Ltd. 0.5 1 15 dia. 2.4 AJ3080 T15 SPECIFICATIONS 1. Contact rating 1) Toggle type and Rocker type Kind of load Resistive load AC 15A 250V Inductive load DC 0.5A 250V, 0.9A 125V, 15A 30V 0.3A 250V (Time constant: 8 ms), 0.5A 125V (Time constant: 8 ms) 15A 30A (Time constant: 8 ms) 15A 250V (Power factor: 0.6) Lamp load (incandescent) Motor load (single phase) 400W 100V, 800W 200V, Inrush current: Max. 40 A 7A 30V 400 W 125 V (single phase), 550 W 250 V (single phase), 750 W 250 V (three-phase) -- 2) Push-button type (momentary) Kind of load Resistive load AC 10A 250V DC 0.4A 250V, 0.8A 125V, 8A 30V AC 15A 250V DC 0.5A 250V, 0.9A 125V, 15A 30V 3) Push-button type (alternate) Kind of load Resistive load 2. Characteristics Shape of handle Protection type *1: IP40 *2: IP64 *3: IP67 Mechanical expected life Electrical expected life (10 cpm) Toggle type Standard type (*1) Panel-sealed type (*3) Terminal-sealed type (*3) Wire leads type (*3) 1-pole and 2-pole: Min. 105 3-pole and 4-pole: Min. 8.5x104 Min. 5x104 (20 cpm) ON-OFF, ON-ON, ON-OFF-ON, Min. 3x104 (20 cpm) ON-(ON), (ON)-OFF-(ON), ON-OFF-(ON) Rocker type Standard type (*1) Panel-sealed type (*2) Terminal-sealed type (*2) Wire leads type (*2) Standard type: Min. 3x104 Panel-sealed, terminalsealed and wire leads types: Min. 104 1500 Vrms (at detection current: 10mA) Min. 100 M (at 500 V DC measured by insulation resistive meter) Wire leads type: Initial, Max. 30 m (By voltage drop at 1 A, 2 to 4 V DC) Other types: Initial, Max. 10 m (By voltage drop at 1 A, 2 to 4 V DC) 112.7N for 1 min. 10 to 55 Hz at double amplitude of 1.5 mm (contact opening: Max. 10 ms) Contact resistance Actuator strength Vibration resistance Terminal strength (static load) Ambient temperature Contact material 24.5N for 1 min. -25C to +70C (Not freezing below 0C) AgZnO alloy DATA (Electrical life, For toggle standard type) Number of operations (x104) Tested condition: 250 V AC, Power factor: 0.6 and 10 cpm 10 4-pole and 3-pole types 2-pole and 1pole types 8 7 6 5 4 3 2 1 0 2 6 10 14 18 22 26 Current (A) Standard type (*1) Panel-sealed type (*3) Min. 3x104 (20 cpm) Standard and panel-sealed types: Min. 3x104 Terminal-sealed and wire leads types: Min. 1.5x104 Breakdown voltage Insulation resistance 9 Push-button type 30 All Rights Reserved (c) COPYRIGHT Panasonic Electric Works Co., Ltd. Min. 104 T15 TOGGLE TYPE DIMENSIONS (mm) (General tolerance: 0.5) 1. Standard type 1) Solder terminal 1-pole 2-pole 3-pole 304 308 304 6.1 d 304 6.1 d ia. M12x1 ia. ia. 17.50.4 Keyway 6.1 d 6.1 d ia. 17.50.4 Keyway 4-pole M12x1 17.5 Keyway 0.4 M12x1 17.50.4 Keyway M12x1 120.4 120.4 120.4 120.4 23.7 27 27 27 6 6 29 Hole for wire leads: 2 dia. Length: 4 6 6 Hole for wire leads: 2 dia. Length: 4 33 Hole for wire leads: 2 dia. Length: 4 33 Hole for wire leads: 2 dia. Length: 4 33 5 4 4 1 5 2 1 6 2 6 3 3 1 3 1 2 3 2 11 10 36.5 7 8 9 12 4 6 7 9 5 28 8 19.5 15.8 Remark: ON-OFF type does not have terminal No. 2, 5, 8 and 11. 2) Screw terminal (M3.5) 1-pole 2-pole 3-pole 304 308 304 6.1 d 304 6.1 d ia. 6.1 d ia. 17.5 Keyway 4-pole 0.4 M12x1 17.50.4 Keyway M12x1 6.1 d ia. ia. 17.5 Keyway 0.4 M12x1 120.4 17.50.4 Keyway M12x1 120.4 120.4 120.4 30.3 30.3 30.3 23.7 6 9.3 29 9.3 9.3 330.4 330.4 330.4 3 2 1 6 5 4 1 2 3 1 3 4 5 6 1 2 3 2 7 11 10 9 28 8 19.5 36.5 5 15.8 7 8 9 12 4 6 Remark: ON-OFF type does not have terminal No. 2, 5, 8 and 11. 3) .250 Quick-connect terminal 1-pole 2-pole 3-pole 304 308 308 6.1 d 6.1 d ia. 17.5 Keyway 308 6.1 d ia. 0.4 M12x1 120.4 27 9.3 0.4 33 3-.250 Quickconnect terminal ia. 17.50.4 Keyway M12x1 17.50.4 Keyway M12x1 120.4 120.4 120.4 30.3 30.3 30.3 9.3 29 6.1 d ia. 17.5 Keyway M12x1 4-pole 9.3 9.3 33 6-.250 Quickconnect terminal 33 9-.250 Quickconnect terminal 12-.250 Quickconnect terminal 5 4 4 1 5 2 1 6 2 6 3 3 1 3 1 2 3 2 8 7 11 10 7 8 9 4 6 12 5 28 9 19.5 15.8 Remark: 1. ON-OFF type does not have terminal No. 2, 5, 8 and 11. 2. There is no through-hole on .250 Quick-connect terminals. All Rights Reserved (c) COPYRIGHT Panasonic Electric Works Co., Ltd. 36.5 T15 2. Panel-sealed type 1) Solder terminal 2) Screw terminal (M3.5) 1-pole 2-pole 1-pole 2-pole 304 308 304 308 5.5 d 5.5 d ia. 17.5 M12x1 18 dia. M12x1 17.5 18 dia. 18 dia. 7.5 5.5 d M12x1 17.5 18 dia. M12x1 17.5 ia. D cut D cut D cut 5.5 d ia. ia. 7.5 10 23.7 D cut 7.5 10 10 26.9 7.5 10 27 6 30.2 6 9 9.3 1 2 3 2 2 19.5 5 5 15.8 4 6 4 6 29 33 29 1 3 1 3 1 2 3 19.5 15.8 33 Remark: ON-OFF type does not have terminal No. 2 and 5. 3. Terminal-sealed type 1) Solder terminal 2) Screw terminal (M3.5) 1-pole 2-pole 1-pole 2-pole 304 308 304 308 5.5 d 5.5 d ia. D cut ia. ia. M12x1 17.5 M12x1 17.5 18 dia. 18 dia. 5.5 d 5.5 d ia. D cut D cut M12x1 17.5 M12x1 17.5 18 dia. 18 dia. D cut 7.5 10.3 7.5 10.3 7.5 10.3 7.5 10.3 23.7 26.9 29 32.2 5 10.3 5 10.3 1 3 1 2 3 1 2 3 2 2 15.8 19.5 5 19.5 5 15.8 4 6 29 29 33 33 Remark: ON-OFF type does not have terminal No. 2 and 5. 4. Wire leads type 1-pole 2-pole 304 308 5.5 d 5.5 d ia. ia. 18 dia. 18 dia. 17.5 M12x1 17.5 M12x1 D cut D cut 7.5 10.3 7.5 10.3 33.2 36.4 Color of wire leads 20020 200 104 Remarks: 1. ON-OFF type does not have wire lead No. 2 and 5. 2. 600 V vinyl wire (VSF, thick: 2 mm2, length: 200 mm) is used. Please inquire about type and different length of lead wire. 3 2 30.6 1 15.8 20 104 3 2 1 6 5 4 21.1 33 All Rights Reserved (c) COPYRIGHT Panasonic Electric Works Co., Ltd. No. Color 1 Brown 2 Red 3 Orange 4 Yellow 5 Green 6 Blue T15 ROCKER TYPE DIMENSIONS (mm) (General tolerance: 0.5) 1. Standard type 1) Solder terminal 2) Screw terminal (M3.5) 1-pole 2-M3x0.5 2-pole 2-M3x0.5 45 38 27 13 1-pole 2-M3x0.5 45 38 27 13 2-pole 2-M3x0.5 45 38 27 45 38 27 13 10.2 13 5.7 5.7 33.8 5.7 5.7 37 6 10.2 10.2 10.2 37.1 40.3 9.3 6 9.3 1 3 1 3 1 2 3 1 2 3 2 2 15.8 15.8 19.5 19.5 5 5 4 6 4 6 29 29 33 33 Remarks: 1. ON-OFF type does not have terminal No. 2 and 5. 2. Dimensions of handle: 13.4 x 27 2. Panel-sealed type 1) Solder terminal 2) Screw terminal (M3.5) 1-pole 2-pole 41 13 1-pole 2-pole 41 13 41 13 7.8 41 13 7.8 7.8 2.5 27.7 5 34 7.8 2.5 2.5 2.5 30.9 27.7 5 10.3 30.9 10.3 34 34 34 1 3 1 2 3 1 2 3 2 2 22 29 17 24 22 29 5 5 17 24 4 6 Remarks: 1. ON-OFF type does not have terminal No. 2 and 5. 2. Dimensions of handle: 1-pole: 12.6 x 29, 2-pole: 17.4 x 29 3. Terminal-sealed type 1) Solder terminal 2) Screw terminal (M3.5) 1-pole 41 13 2-pole 1-pole 2-pole 41 41 41 13 13 7.8 13 7.8 7.8 27.7 30.9 27.7 5 10.3 5 34 2.5 2.5 2.5 2.5 7.8 34 30.9 10.3 34 34 1 3 1 2 3 1 2 3 2 2 17 24 22 29 17 24 22 29 5 5 4 6 Remarks: 1. ON-OFF type does not have terminal No. 2 and 5. 2. Dimensions of handle: 1-pole: 12.6 x 29, 2-pole: 17.4 x 29 All Rights Reserved (c) COPYRIGHT Panasonic Electric Works Co., Ltd. T15 4. Wire leads type 1-pole 2-pole 41 13 41 13 7.8 7.8 2.5 2.5 42.2 45.4 Color of wire leads 20020 10 20020 4 104 34 Remarks: 1. ON-OFF type does not have terminal No. 2 and 5. 2. Dimensions of handle: 1-pole: 12.6 x 29, 2-pole: 17.4 x 29 3. 600 V vinyl wire (VSF, thick: 2 mm2, length: 200 mm) is used. Please inquire about type and different length of lead wire. 3 2 34 2 3 17 24 1 5 6 1 4 22 29 No. Color 1 Brown 2 Red 3 Orange 4 Yellow 5 Green 6 Blue PUSH-BUTTON TYPE DIMENSIONS (mm) (General tolerance: 0.5) 1. Standard type * Solder terminal, Momentary * Solder terminal, Alternate 1-pole 2-pole 1-pole 2-pole 13.2 dia. 13.2 dia. 13.2 dia. 13.2 dia. 9 15.9 M12x1 9 1-pole M12x1 M12x1 M12x1 * Screw terminal (M3.5) Dimensions other than listed below are same as those of solder terminal type. 9 15.9 9 17.1 2-pole 17.1 5.9 4.7 Keyway 17.3 Keyway 4.7 23.7 Keyway Keyway 5.9 14 14 14 9.3 1 2 32.4 3 32.4 2 6 19.5 15.8 5 6 29 1 2 3 2 2 19.5 13.2 dia. 13.2 dia. 4.3 D cut 33 * Solder terminal, Alternate 2-pole M12x1 15.9 4 6 4 6 29 2. Panel-sealed type * Solder terminal, Momentary 19.5 5 5 15.8 33 1-pole 33 1 3 1 3 1 2 3 15.8 29 4 6 6 6 9 1 3 26.9 9.3 1-pole 13.2 dia. M12x1 15.9 9 4.3 D cut 7.5 13.2 dia. M12x1 15.9 9 4.3 D cut M12x1 15.9 9 14.4 1-pole 2-pole 4.3 D cut 7.5 7.5 17.7 * Screw terminal (M3.5) Dimensions other than listed below are same as those of solder terminal type. 2-pole 7.5 14.4 14.4 9.3 26.9 23.7 3 32.4 1 2 3 2 6 1 32.4 9.3 6 4 6 29 1 3 1 3 1 2 3 1 2 3 2 2 4 33 29 19.5 5 6 4 6 29 15.8 19.5 5 15.8 33 All Rights Reserved (c) COPYRIGHT Panasonic Electric Works Co., Ltd. 19.5 5 15.8 6 6 33 T15 MOUNTING DIMENSIONS 1. Toggle type Type Standard type 12.3 dia. 12.5 dia. 12.5 dia. Front hex nut Keying washer Panel cutout (mm) 11.5 Lock washer 9.20.1 Back hex nut 1.5 3+0.2 0 dia. Panel thickness Max. 4.6 mm Max. 5.6 mm Max. 5.6 mm (without keying washer) (without keying washer) Panel-sealed, Terminal-sealed and Wire leads types Type 12.5 dia. Panel cutout (mm) 12.5 dia. 11.2 Panel thickness Max. 4 mm (without keying washer) Max. 4 mm Remark: For panel installations of standard type, be use to use the back hex nut. 2. Rocker type Standard type Panel-sealed, Terminal-sealed and Wire leads types 14.5+0.3 0 1 pole 2-pole 380.3 28+0.3 0 34.20.1 22.20.1 17.20.1 2-3.50.1 dia. Panel thickness 34.20.1 R0 Panel cutout (mm) R0 .5 .5 M M ax ax . . Type Max. 4.5 mm 1.2 to 3.2 mm Standard type Panel-sealed type 3. Push-button type Type 12.5 dia. Panel cutout (mm) 12.5 dia. 12.3 dia. 12.5 dia. 11.5 12.5 dia. 11.2 9 1.5 3 dia. Panel thickness Momentary, 1-pole: Momentary, 1-pole: Momentary, 1-pole: Max. 10 mm Max. 11 mm Max. 10 mm Momentary, 2-pole: Momentary, 2-pole: Momentary, 2-pole: Max. 7.5 mm Max. 7.5 mm Max. 6.5 mm Alternate: Max. 7.5 mm Alternate: Max. 7.5 mm Alternate: Max. 6.5 mm (without keying washer) (without keying washer) Max. 4 mm Remark: For panel installations of standard type, be use to use the back hex nut. All Rights Reserved (c) COPYRIGHT Panasonic Electric Works Co., Ltd. Max. 4 mm (without keying washer) T15 ELECTRICAL CIRCUIT DIAGRAM 1. Toggle type and Rocker type Number of pole Toggle type Rocker type 1-pole Available Available 2-pole Available Available 3-pole Available *3 -- 4-pole Available *3 -- Terminal arrangement (As seen from terminal side) Keyway Handle shape Toggle type Keyway Keyway Keyway Rocker type Right Part No. Keyway ON-OFF -- -- 1-3 1-3, 4-6 1-3, 4-6, 7-9 1-3, 4-6, 7-9, 10-12 -- -- -- -- -- -- -- -- 2-3 2-3, 5-6 2-3, 5-6, 8-9 2-3, 5-6, 8-9, 11-12 -- -- -- -- 1-2 1-2, 4-5 1-2, 4-5, 7-8 1-2, 4-5, 7-8, 10-11 2-3 2-3, 5-6 2-3, 5-6, 8-9 2-3, 5-6, 8-9, 11-12 -- -- -- -- 1-2 1-2, 4-5 1-2, 4-5, 7-8 1-2, 4-5, 7-8, 10-11 ON-OFF type does not have a terminal No. 2. ON-OFF type does not have terminal No. 2 and 5. ON-OFF type does not have terminal No. 2, 5 and 8. ON-OFF type does not have terminal No. 2, 5, 8 and 11. Left Handle position and contact terminal number Keyway Right Part No. Keyway ON-ON ON-<ON> *1 -- -- Left Keyway *2 Right Part No. Keyway ON-OFF-ON <ON>-OFF-<ON> ON-OFF-<ON> *1 Center Keyway Left Keyway Remarks Remarks: *1. For ON-<ON>, ON-OFF-<ON> type of toggle, if the lever turns to the keyway side, it takes momentary position. *2. For the rocker type, if the actuator turns to the left side in view of the side where a part number is marked, it takes momentary position. *3. Only standard type 2. Push-button type 1-pole 2-pole Terminal arrangement (As seen from terminal side) Keyway Push-button position and contact terminal number Keyway 2-3 2-3, 5-6 1-2 1-2, 4-5 Operated All Rights Reserved (c) COPYRIGHT Panasonic Electric Works Co., Ltd. T15 NOTES 1. Dustproof, waterproof, anticorrosive gas, and oil-proof designs The panel-sealed type/terminal-sealed type/wire lead type switch has a protection level of IP67 on the outer side of the mounting panel and a level of IP40, IP60, or IP67 on the inner side of the panel. For actual application, note the following points: 1) Avoid immersion in water or oil during installation. 2) Avoid immersion in water or oil during operation. 3) Oils or gases impose varying degrees of impact on the switch's sealing performance depending on type or quantity. 4) While the switch has a immersion and dust-protected design, its sealing performance or operabillity may be adversely affected in an environment where in the switch's movable parts can be contaminated with dust, oil, or other foreign objects. For the toggle type, use of a rubber cap is recommended. 5) The standard toggle switch, when used with a rubber cap, provides a protection level of IP54. It should be used in an environment where it will not be subject to frequent water splashes. 6) As the sealing performance of the rocker type switch is affected by the panel processing accuracy or mounted panel thickness, check the switch under actual loading conditions. (While water or dust will not enter the switch's internal structure, it may enter the panel.) 7) Do not operate the rocker type switch when water accumulates in the switch handle. 2. Installation 1) For the toggle and push-button type a. When installing the standard type switch, be sure to use a hex nut. b. For the panel-sealed, terminal-sealed and wire lead types, use a lock washer on the front side of the panel, and an O-ring on the back side of it. c. Do not install the switch by rotating it. 2) For the rocker type a. In case the panel-sealed, terminalsealed or wire leads types are used in the condition where the water splash on, please install the switches tilt more than 25. (90 recommended) Mounting panel Min. 25 b. In case water inside the switch case may freeze, please install the switch vertically to avoid the water remain inside the switch. 3) Rubber cap installation a. The washer should be used on the back side of the panel. 3.0 to 3.5 mm Washer e. If the rubber cap is installed over the hex nut, the waterproof performance will be impaired although the dustproof performance will not be affected. Hexagonal nut 3. Soldering 1) By using 350C soldering iron, soldering should be completed within 5 seconds. 2) Exercise care so as not to touch the switch body with a soldering iron. 4. Load type and ratings 1) When the switch is loaded with a lamp, motor or capacitive load, a surge current higher than the stationary current passes through the switch contacts. Measure the surge with the actual load and, if needed, take necessory action so that the surge will not exceed the switch's rated current. 2) When the switch is loaded with an inductive load (relay, solenoid, buzzer, etc.), a contact failure may result from arc discharge caused by a counterelectromotive force. It is advisable that you use an adequate anti-spark circuit across the switch contacts. 5. Others 1) Do not apply an excessive static load exceeding 112.7N {11.5kgf} perpendicular to the direction of operation. 2) Operate the switch knob by hand. 3) Take care not to drop the product as it may impair performance. b. Enough screw pitch should be obtained being adjusted within 3 to 3.5mm (See Fig.2) c. Install a rubber cap on the switch knob before securing the switch with the hex nut. d. The mounting hole in the panel should preferably be provided with an antirotation projection. Mounting hole All Rights Reserved (c) COPYRIGHT Panasonic Electric Works Co., Ltd.