44
Cable glands
Cable Glands
45
Cable glands
We offer cable glands as a well balanced
assortment for different applications.
• Cable glands made from plastic and
brass
• EMC cable glands
• For hazardous areas in accordance with
EN 50014, EN 50019 and ATEX
• VDE, CSA and UL approved
Cable entries, for example for enclosures
or heavy duty connectors can be easily
and reliably installed.
DIN 40050 protection classes:
IP 54 Protection against dust accumu-
lation as well as protection
against water splash
IP 65 Protection against dust inflow as
well as protection against hose
water
IP 66 Protection against dust inflow as
well as protection in the case of
overflooding
IP 68 Protection against dust inflow as
well as protection when submerg-
ing
IP 69 Protection against water under
pressure
Labelling of explosion protected electric equipment according to ‘old’ Ex approvals.
Name of Type Examination Symbol for Conformity to Risk of Abbreviation Group of
manufacturer designation certificate number electrical equipment european explosion of protection electrical
or logo from of EU test site certified by standards classes used devices
manufacturer EU test site certified
16 E Ex e II
i
T
The European Technical Standard
DIN EN 50 262
Metric cable glands for electric instal-
lations - the end of the PG–Cable
glands threads.
• The technical standards “Cable Glands
for cables and conductors with PG
standard threads” DIN 46320 (P1 - P4),
DIN 46255, DIN 46259, DIN 46319 and
DIN VDE 0619 became invalid on the
31 December 1999.
• Cable glands with PG threads are no
longer standard.
• The design approvals granted in accor-
dance with DIN VDE 0619: 1987 – 09
remained valid until 31.3.2001.
• The European Standard “Metric Cable
Glands for Electrical Installations” EN 50
262 became valid on 1.4.1999.
• The EN Standard EN 50 262 is manda-
tory in all member countries of the
European Union (EU) and associated
countries collaborating with CENELEC
(European Committee For
Electrotechnical Standardization) who
adopt the standard.
• That means that only metric cable
glands are permitted to be used in new
constructions as of 1.3.2001 in those
countries described above.
Cable glands
46
Labeling of devices and protection systems according ATEX
The following information must be clearly and permanently readable on every device
and protection system:
Example:
Cable glands with metric connection thread
With the taking of effect of European standard EN 50 262 – metric cable glands for electric installation – the Europe-wide introduction of the metric
ISO fine thread in cable glands took place on 01.01.2000.
The EN 60 423 standard lists the individual thread sizes. The previously-known thread sizes PG 7 to PG 48 (10 sizes) were replaced by the metric
sizes M 12 to M 63 (8 sizes). This catalogue contains a large selection of metric cable glands Ex cables and cable entries for use in hazardous areas.
Name of Type/size Number of Symbol of Symbol of Conformity to Risk of Abbreviation Device
manufacturer designation EU-type-examination protection device european explosion of applied group
or from test certificate from group and standards type of
logo manufacturer EU test site explosion category certified protection
classes
II 2 G E EX e II
ia
T
Cable glands
47
Cable Glands
A: Inner sheath
B: Lead sheath
C:Armouring (steel strip / SWA / braided)
D:Outer sheath
1: Gland
2: Sealing washer for inner cable sheath
3: Clamping module / Earthing of armouring
4: Base
5: Sealing washer for outer cable sheath
6: Washers
7: Union nut
1: Gland
2: Clamping module
3: Sealing washer
4: Union nut
1: Gland
2: Sealing washer
3: Washer
4: Union nut
E: Outer sheath
Non-armoured cableArmoured cable
Cable glands for non-armoured cable
Cable glands for armoured cable
Cable glands
Criteria for the selection of cable glands Type ADE
Define the installation area, in which you want to use the glands
Define the cable types to determine the requested functions
Check the dimensions of the outer cable sheath
Check the size and type of reinforcement
Check the dimensions of the inner cable sheath
Check the dimensions of the lead sheath
Determine the environmental condition
Check the accessories
Installation instructions for endangered areas in accordance with the Standards CENELEC EN 50014 - 50018 - 50019
Increased safety to Standard EN 50019; direct thread insertion into the enclosure or with a lock nut.
Unused insertions have to be closed with a certified stopping plug.
Flame protected in accordance with EN 50018; direct thread insertion into the enclosure with five full pitches (approx. 8 mm);
Unused insertion have to be closed with a certified stopping plug.
Cable glands
48
Plastic IP54 Plastic IP68
Reasonably priced cable glands IP 54 Plastic cable glands IP68; VDE, CSA and UL tested;
halogene-free.
EN 50262: metric
Technical data
Material: Polyamide connection thread M
Polystyrene connection thread PG
Sealing: Soft rubber
Temperature: -20°C ... +60°C
Protection class: IP54 (with thread sealing ring type GWDR ...-PO = IP65)
Colour: similar grey RAL 7035
Technical data
Material: Polyamide
Sealing: Neoprene
Temperature: -40°C ... +70°C (peak +100°C)
Protection class: IP68 / 5 bar in the stated clamping range with GWDR
Colour: similar grey RAL 7035
Ordering data
Type Thread Clamp range L L1 SW1/SW2 Qty. Cat. No.
Metric gland plastic IP54
VGM12-K54 M 12 x 1.5 6.0 - 8.0 32 11 19/16 50 1777080000
VGM16-K54 M 16 x 1.5 8.0 - 10.0 32 11 19/16 50 1777070000
VGM20-K54 M 20 x 1.5 8.0 - 10.0 35 11 22/19 50 1777050000
VGM25-K54 M 25 x 1.5 12.0 - 14.0 39 11 27/23 50 1777030000
VGM25-K54 M 25 x 1.5 15.0 - 17.0 39 11 27/23 50 1778830000
VGM32-K54 M 32 x 1.5 24.0 - 26.0 44.50 11 42/40 25 1777020000
VGM40-K54 M 40 x 1.5 28.0 - 30.0 44.50 11 42/40 25 1777010000
VGM50-K54 M 50 x 1.5 31.0 - 33.0 53 11 53/50 10 1776990000
VGM63-K54 M 63 x 1.5 45.0 - 47.0 58 11 65/60 10 1776980000
PG gland plastic IP54
VG 7-K54 PG 7 5.0 - 7.0 28 8 15/13 50 0521560000
VG 9-K54 PG 9 6.0 - 8.0 29 8 19/17 50 0261560000
VG 11-K54 PG 11 8.0 - 10.0 32 8 22/19 50 0260760000
VG 13.5-K54 PG 13.5 10.0 - 12.0 34 9 24/21 50 0260860000
VG 16-K54 PG 16 12.0 - 14.0 38 10 27/23 25 0261460000
VG 21-K54 PG 21 15.0 - 17.0 43.5 11 32/30 20 0260960000
VG 29-K54 PG 29 24.0 - 26.0 44.5 11 42/40 20 0261060000
VG 36-K54 PG 36 31.0 - 33.0 55 13 53/50 10 0497660000
VG 42-K54 PG 42 39.0 - 40.0 60 13 60/55 10 0497760000
VG 48-K54 PG 48 45.0 - 47.0 61 14 65/60 5 1718760000
all sizes in mm
Ordering data
Type Thread Clamp range L L1 SW Qty. Cat. No.
Metric gland plastic Approval: VDE
VG M 12 - K 68 M 12 x 1.5 3.0 - 6.5 31 8 15 50 1772280000
VG M 16 - K 68 M 16 x 1.5 5.0 - 10.0 35 10 22 50 1772290000
VG M 20 - K 68 M 20 x 1.5 6.0 - 12.0 43 10 24 50 1772300000
VG M 25 - K 68 M 25 x 1.5 13.0 - 18.0 48 10 33 25 1772310000
VG M 32 - K 68 M 32 x 1.5 18.0 - 25.0 61 15 42 20 1772320000
VG M 40 - K 68 M 40 x 1.5 22.0 - 32.0 72 15 53 20 1772330000
VG M 50 - K 68 M 50 x 1.5 30.0 - 38.0 74 18 60 10 1772340000
VG M 63 - K 68 M 63 x 1.5 34.0 - 44.0 75 18 65 5 1772350000
PG gland plastic Approval: VDE/UL
VG 7-K68 PG 7 3.0 - 6.5 30.5 8.0 15 50 1568970000
VG 9-K68 PG 9 4.0 - 8.0 34 8.0 19 50 1568980000
VG 11-K68 PG 11 5.0 - 10.0 37 8.0 22 50 1568990000
VG 13.5-K68 PG 13.5 6.0 - 12.0 39 9.0 24 50 1569000000
VG 16-K68 PG 16 10.0 - 14.0 42.5 10.0 27 25 1569010000
VG 21-K68 PG 21 13.0 - 18.0 48 11.0 33 20 1569020000
VG 29-K68 PG 29 18.0 - 25.0 53 11.0 42 20 1569030000
VG 36-K68 PG 36 22.0 - 32.0 65 13.0 53 10 1569040000
VG 42-K68 PG 42 30.0 - 38.0 68 13.0 60 10 1569050000
VG 48-K68 PG 48 34.0 - 44.0 69 14.0 65 5 1718770000
NPT gland plastic Approval: UL/CSA
VG NPT 3/8" 5-10-K 68 NPT 3/8" 5.0 - 10.0 42 15 22 50 1772520000
VG NPT 1/2" 6-12-K 68 NPT 1/2" 6.0 - 12.0 42 15 24 50 1772550000
VG NPT 1/2" 10-14-K 68 NPT 1/2" 10.0 - 14.0 45 15 27 25 1772560000
VG NPT 3/4" 13-18-K 68 NPT 3/4" 13.0 - 18.0 46 15 33 20 1772590000
VG NPT 1" 18-25-K 68 NPT 1" 18.0 - 25.0 60 18 42 20 1772600000
all sizes in mm
L
L1
L
L1
Thread
Thread
a
v
Cable glands
49
Cable Glands
Cable glands brass IP54
Ordering data
Type Thread Clamp range L L1 SW1/SW2 Qty. Cat. No.
Metric gland brass IP 54, hexagonal
VGM12-MS54 M 12 x 1.5 5.0 - 7.0 21.50 6 14/13 100 1778410000
VGM12-MS54 M 12 x 1.5 6.0 - 8.0 22 6 17/15 100 1778400000
VGM16-MS54 M 16 x 1.5 8.0 - 10.0 26 6 20/18 100 1778390000
VGM20-MS54 M 20 x 1.5 8.0 - 10.0 26.50 6.50 22/18 50 1778380000
VGM20-MS54 M 20 x 1.5 10.0 - 12.0 26.50 6.50 22/20 50 1778370000
VGM25-MS54 M 25 x 1.5 12.0 - 14.0 27.50 7 27/22 50 1778360000
VGM25-MS54 M 25 x 1.5 15.0 - 17.0 29.50 7 30/28 50 1778350000
VGM32-MS54 M 32 x 1.5 24.0 - 26.0 33 8 40/38 25 1778340000
VGM40-MS54 M 40 x 1.5 28.0 - 30.0 33 8 43/37 25 1778330000
VGM50-MS54 M 50 x 1.5 31.0 - 33.0 39 9 55/47 10 1778320000
VGM50-MS54 M 50 x 1.5 39.0 - 41.0 43 9 57/54 5 1778310000
VGM63-MS54 M 63 x 1.5 45.0 - 47.0 45 10 68/60 5 1778300000
PG gland brass IP 54, hexagonal
VG 7-MS54 PG 7 5.0 - 7.0 20.5 5 14/13 50 0521500000
VG 9-MS54 PG 9 6.0 - 8.0 22 6 17/15 50 0261500000
VG 11-MS54 PG 11 8.0 - 10.0 26 6 20/18 50 0260700000
VG 13.5-MS54 PG 13.5 10.0 - 12.0 26 6.5 22/20 50 0260800000
VG 16-MS54 PG 16 12.0 - 14.0 27 6.5 24/22 25 0261400000
VG 21-MS54 PG 21 15.0 - 17.0 29.5 7 30/28 20 0260900000
VG 29-MS54 PG 29 24.0 - 26.0 33 8 40/37 20 0261000000
VG 36-MS54 PG 36 33.0 - 35.0 39 9 50/47 10 0497600000
VG 42-MS54 PG 42 41.0 - 43.0 44 10 57/54 10 0497700000
VG 48-MS54 PG 48 45.0 - 47.0 45 10 64/60 5 1718780000
all sizes in mm
Ordering data
Type Thread Clamp range L L1 SW Qty. Cat. No.
Metric gland brass
VG M 12 - MS 68 M 12 x 1.5 3.0 - 6.5 24 5 14 50 1772200000
VG M 16 - MS 68 M 16 x 1.5 5.5 - 10.0 28 5.5 17 50 1772210000
VG M 20 - MS 68 M 20 x 1.5 8.0 - 13.0 32 6 22 50 1772220000
VG M 25 - MS 68 M 25 x 1.5 11.0 - 18.0 35 7 30 20 1772230000
VG M 32 - MS 68 M 32 x 1.5 15.0 - 21.0 39 8 34 20 1772240000
VG M 40 - MS 68 M 40 x 1.5 19.0 - 27.0 53 8 44 10 1772250000
VG M 50 - MS 68 M 50 x 1.5 26.0 - 35.0 55 9 55 10 1772260000
VG M 63 - MS 68 M 63 x 1.5 34.0 - 45.0 58 10 66 5 1772270000
PG gland brass IP 68
VG 7-MS68 PG 7 3.0 - 6.5 23 5 14 50 1569060000
VG 9-MS68 PG 9 4.0 - 10.0 27 6 17 50 1569070000
VG 11-MS68 PG 11 5.0 - 10.0 28.5 6 20 50 1569080000
VG 13.5-MS68 PG 13.5 6.0 - 12.0 29.5 6.5 22 50 1569090000
VG 16-MS68 PG 16 10.0 - 14.0 29.5 6.5 24 25 1569100000
VG 21-MS68 PG 21 13.0 - 18.0 33.5 7 30 20 1569110000
VG 29-MS68 PG 29 18.0 - 25.0 37.5 8 40 20 1569120000
VG 36-MS68 PG 36 22.0 - 32.0 45 9 50 10 1569130000
VG 42-MS68 PG 42 30.0 - 38.0 47.5 10 57 10 1569140000
VG 48-MS68 PG 48 34.0 - 44.0 50.5 10 64 5 1718790000
NPT gland brass
VG NPT 3/8" - MS 68NPT 3/8" 4.0 - 8.0 36 15 17 50 1772370000
VG NPT 1/2" - MS 68NPT 1/2" 6.0 - 12.0 36 13 22 50 1772380000
VG NPT 3/4" - MS 68NPT 3/4" 13.0 - 18.0 39 13 30 20 1772390000
all sizes in mm
Cable glands brass IP68
Technical data
Material: Nickel plated brass
Sealing: Soft rubber
Temperature: -20°C ... +60°C
Protection class: IP54 (with thread sealing ring Type GWDR ...-PO = IP65)
Technical data
Material: Nickel plated brass
Sealing: Neoprene
Temperature: -40°C ... +70°C (peak +100°C)
Protection class: IP 68 / 5 bar with GWDR in the clamping area
Brass cable gland with hexagon threaded glands Brass cable gland IP68 with strain relief.
Reduced clamping range on request.
Multiple seal insert on request.
L
L1
L
L1
Thread
Thread
Cable glands
50
Plastic cable glands with bending protection Cable glands brass with bending protection
Cable gland with bending protection and internal strain
relief.Clamping profile made of Hostaform C. Cable gland with bending protection and internal strain relief.
Without external strain relief clamp. Clamping profile made of
Hostaform C.
Technical data
Material: Polyamide, glass fibre reinforced
Sealing: Soft rubber
Temperature: -10°C...+80°C
Protection class: IP 65
Colour: similar Grey RAL 7035
Technical data
Material: Nickel plated brass
Sealing: Soft rubber
Temperature: -10°C...+80°C
Protection class: IP 65
Ordering data
Type Thread Clamp range L L1 SW Qty. Cat. No.
Metric KV cable gland plastic bending protection
VGM12-K65 BS M 12 x 1.5 6.0 - 8.0 40 11 19 50 1778750000
VGM16-K65 BS M 16 x 1.5 6.0 - 8.0 40 11 19 50 1778760000
VGM20-K65 BS M 20 x 1.5 8.0 - 10.0 45 11 22 50 1778770000
VGM20-K65 BS M 20 x 1.5 10.0 - 12.0 57 11 24 50 1778780000
VGM25-K65 BS M 25 x 1.5 12.0 - 14.0 51 11 27 50 1778790000
VGM25-K65 BS M 25 x 1.5 14.0 - 18.0 53 11 33 25 1778800000
VGM32-K65 BS M 32 x 1.5 18.0 - 24.0 60 11 42 25 1778810000
PG-KV plastic bending protection
VG 7-K65 BS PG 7 4.0 - 6.0 36 8 15 50 1720400000
VG 9-K65 BS PG 9 6.0 - 8.0 37 8 19 50 1720410000
VG 11-K65 BS PG 11 8.0 - 10.0 42 8 22 50 1720420000
VG 13.5-K65 BS PG 13.5 10.0 - 12.0 45 9 24 50 1720430000
VG 16-K65 BS PG 16 12.0 - 14.0 50 10 27 25 1720440000
VG 21-K65 BS PG 21 14.0 - 18.0 53 11 32 20 1720450000
VG 29-K65 BS PG 29 18.0 - 24.0 60 11 42 20 1720460000
all sizes in mm
Ordering data
Type Thread Clamp range L L1 SW1/SW2 Qty. Cat. No.
PG-KV cable gland Brass bending protection
VG 9-MS65 BS PG 9 6.0 - 8.0 35 6 19/15 50 1720340000
VG 11-MS65 BS PG 11 8.0 - 10.0 35 6 22/19 50 1720350000
VG 13.5-MS65 BS PG 13.5 10.0 - 12.0 36 6.5 24/20 50 1720360000
VG 16-MS65 BS PG 16 12.0 - 14.0 40 7 27/30 25 1720370000
VG 21-MS65 BS PG 21 14.0 - 18.0 44 7 32/34 20 1720380000
VG 29-MS65 BS PG 29 18.0 - 24.0 50 8 41/46 20 1720390000
all sizes in mm
L
L1
L
L1
Thread
Thread
Cable glands
51
Cable Glands
Cable glands brass IP54 with gripping jaw Cable glands brass for Ex-areas
With cantered strain relief For use in hazardous areas. These cable glands are tested for
higher safety specifications with certified conformity to approvals
LCIE 97ATEX6005X.
Variant for EMC applications are available.
Technical data
Material: Nickel plated brass
Sealing: Universal sealing ring neoprene
Temperature: -30°C ... +90°C
Protection class: IP54 (with thread sealing ring type GWDR ...-PO = IP65)
Technical data
Material: Nickel plated brass
Sealing: Neoprene
Temperature: -20°C ... +100°C
Protection class: IP66 (with thread sealing ring
Type GWDR ...-NP = IP68/20 bar)
ATEX certification available
Ordering data
Type Thread Clamp range L L1 SW1/SW2 Qty. Cat. No.
Metric gland brass IP 54, hexagonal
VG M12-MS54ZE M 12 x 1.5 5.0 - 7.0 21.50 6 14 100 1778420000
VG M12-MS54ZE M 12 x 1.5 4.0 - 9.5 22 6 17 100 1778430000
VG M16-MS54ZE M 16 x 1.5 4.0 - 9.5 26 6 18 100 1778440000
VG M20-MS54ZE M 20 x 1.5 6.0 - 11.5 26.50 6.50 22 50 1778450000
VG M20-MS54ZE M 20 x 1.5 6.0 - 13.5 26.50 6.50 22 50 1778460000
VG M25-MS54ZE M 25 x 1.5 6.0 - 15.5 27.50 7 30 50 1778470000
VG M25-MS54ZE M 25 x 1.5 9.0 - 21.5 29.50 7 30 50 1778480000
VG M32-MS54ZE M 32 x 1.5 17.0 - 29.5 33 8 39 25 1778490000
VGM40-MS54ZE M 40 x 1.5 17.0 - 29.5 33 8 43 25 1778500000
VG M50-MS54ZE M 50 x 1.5 23.0 - 36.5 39 9 55 10 1778510000
VG M50-MS54ZE M 50 x 1.5 29.0 - 42.5 43 9 57 5 1778520000
VG M63-MS54ZE M 63 x 1.5 35.0 - 46.5 45 10 68 5 1778530000
PG gland brass IP 54, hexagonal
VG 7-MS54-ZE PG 7 5.0 - 7.0 27 5 14/16 50 1718800000
VG 9-MS54-ZE PG 9 4.0 - 11.0 30.5 6 17/19 50 1718810000
VG 11-MS54-ZE PG 11 6.0 - 13.0 31.5 6 20/22 50 1718820000
VG 13.5-MS54-ZE PG 13.5 6.0 - 13.0 32 6.5 22/24 50 1718830000
VG 16-MS54-ZE PG 16 6.0 - 16.0 33 6.5 24/27 25 1718840000
VG 21-MS54-ZE PG 21 9.0 - 20.0 38 7 30/34 20 1718850000
VG 29-MS54-ZE PG 29 17.0 - 28.0 43 8 40/42 20 1718860000
VG 36-MS54-ZE PG 36 23.0 - 34.0 49.5 9 50/52 10 1718870000
VG 42-MS54-ZE PG 42 29.0 - 40.0 53.5 10 57/62 10 1718880000
VG 48-MS54-ZE PG 48 35.0 - 46.0 55 10 64/68 5 1718890000
all sizes in mm
Ordering data
Type Thread Clamp range L L1 SW Qty. Cat. No.
Metric gland brass-KV for Eex-e
VG M 16-Exe MS M 16 x 1.5 7.0 - 11.0 28 8 22 50 1737210000
VG M 20-Exe MS M 20 x 1.5 8.5 - 13.0 28 8 24 50 1737220000
VG M 25-Exe MS M 25 x 1.5 13.5 - 18.0 33 9 30 25 1737230000
VG M 32-Exe MS M 32 x 1.5 17.5 - 25.0 38 10 41 20 1737240000
VG M 40-Exe MS M 40 x 1.5 24.5 - 33.5 49 11 52 10 1737250000
VG M 50-Exe MS M 50 x 1.5 33.0 - 43.0 54 12 63 5 1737260000
VG M 63-Exe MS M 63 x 1.5 43.5 - 55.0 60 13 77 5 1737270000
PG gland brass-KV for Eex-e
VG 7-Exe MS PG 7 4.0 - 8.0 24 7 18 50 1718990000
VG 9-Exe MS PG 9 6.0 - 11.0 28 8 22 50 1719000000
VG 11-Exe MS PG 11 7.5 - 13.0 28 8 24 50 1719010000
VG 13.5-Exe MS PG 13.5 7.5 - 13.0 32 8 24 50 1719020000
VG 16-Exe MS PG 16 12.5 - 18.0 33 9 30 25 1719030000
VG 21-Exe MS PG 21 17.5 - 23.5 38 10 41 20 1719040000
VG 29-Exe MS PG 29 24.5 - 31.5 49 11 52 20 1719050000
VG 36-Exe MS PG 36 33.0 - 40.5 54 12 63 10 1719060000
VG 42-Exe MS PG 42 33.0 - 43.0 54 12 63 10 1719070000
VG 48-Exe MS PG 48 42.5 - 52.5 60 13 77 5 1719080000
NPT brass KV for Eex-e
VG NPT 1/2" Eex-e MS NPT 1/2" 8.5 - 13.0 36 16 24 50 1778160000
VG NPT 3/4" Eex-e MS NPT 3/4" 13.5 - 18.0 40 16 30 25 1778150000
VG NPT 1" Eex-e MS NPT 1" 17.5 - 25.0 48 20 41 1 1778140000
VG NPT 1 1/4" Eex-e MS NPT 1 1/4" 24.5 - 33.5 58 20 52 1 1778130000
VG NPT 1 1/2" Eex-e MS NPT 1 1/2" 24.5 - 33.5 58 20 52 1 1778120000
VG NPT 2" Eex-e MS NPT 2" 33.0 - 43.0 62 20 63 1 1778110000
VG NPT 2 1/2" Eex-e MS NPT 2 1/2" 43.5 - 55.0 75 28 77 1 1778090000
all sizes in mm
L
L1
Thread
L
L1
Thread
T
Cable glands
52
Ordering data
Type Thread Clamp range L L1 SW Qty. Cat. No.
Metric plastic cable glands for EExe-areas
VG M 16-Exe SW M 16 x 1.5 5.0 - 8.0 34 12 19 50 1737280000
VG M 20-Exe SW M 20 x 1.5 8.0 - 13.0 35 12 24 50 1737290000
VG M 25-Exe SW M 25 x 1.5 13.0 - 19.0 42 13 32 25 1737300000
VG M 32-Exe SW M 32 x 1.5 17.0 - 25.0 44 15 41 20 1737310000
VG M 40-Exe SW M 40 x 1.5 24.0 - 32.0 50 15 52 10 1737320000
VG M 50-Exe SW M 50 x 1.5 29.0 - 38.0 56 16 59 5 1737330000
VG M 63-Exe SW M 63 x 1.5 36.0 - 44.0 58 16 65 5 1737340000
PG plastic cable glands for EExe-areas
VG 7-Exe SW PG 7 3.5 - 6.0 27 9 15 50 1569360000
VG 9-Exe SW PG 9 5.0 - 8.0 31 9 19 50 1490500000
VG 11-Exe SW PG 11 6.0 - 10.0 31 9 22 50 1490600000
VG 13.5-Exe SW PG 13.5 8.0 - 13.0 33 10 24 50 1490700000
VG 16-Exe SW PG 16 10.0 - 15.0 33 10 26 25 1490800000
VG 21-Exe SW PG 21 13.0 - 19.0 40 11 32 20 1490900000
VG 29-Exe SW PG 29 17.0 - 25.0 41 12 41 20 1491000000
VG 36-Exe SW PG 36 24.0 - 32.0 49 14 52 10 1491100000
VG 42-Exe SW PG 42 28.0 - 38.0 56 16 59 10 1491200000
VG 48-Exe SW PG 48 34.0 - 44.0 60 16 65 5 1718970000
all sizes in mm
Technical data
Material: Polyamide
Sealing: Santoprene
Temperature: -40°C ... +90°C
Protection class: IP66 (with thread sealing ring)
Type GWDR ...-NP = IP68/5 bar)
ATEX available
Colour: similar Black RAL 9005
For use in hazardous areas (EEX e II). These cable glands are
tested for higher safety specifications with certified conformity to
approvals LCIE 97ATEX6007X.
The clamping profile serves as an internal strain relief.
The sealing ring is constructed with a membrane against dust,
which can be easily pierced.
Ordering data
Type Thread Clamp range L L1 SW Qty. Cat. No.
PG plastic cable glands for EExi-areas
VG M 16-Exi BL M 16 x 1.5 5.0 - 8.0 34 12 19 50 1737350000
VG M 20-Exi BL M 20 x 1.5 8.0 - 13.0 35 12 24 50 1737360000
VG M 25-Exi BL M 25 x 1.5 13.0 - 19.0 42 13 32 25 1737370000
VG M 32-Exi BL M 32 x 1.5 17.0 - 25.0 44 15 41 20 1737380000
VG M 40-Exi BL M 40 x 1.5 24.0 - 32.0 50 15 52 10 1737390000
VG M 50-Exi BL M 50 x 1.5 29.0 - 38.0 56 16 59 5 1737400000
VG M 63-Exi BL M 63 x 1.5 36.0 - 44.0 58 16 67/65 5 1737410000
PG plastic cable glands for EExi-areas
VG 7-Exi BL PG 7 3.5 - 6.0 27 9 15 50 1569370000
VG 9-Exi BL PG 9 5.0 - 8.0 31 9 19 50 1491300000
VG 11-Exi BL PG 11 6.0 - 10.0 31 9 22 50 1491400000
VG 13.5-Exi BL PG 13.5 8.0 - 13.0 33 10 24 50 1491500000
VG 16-Exi BL PG 16 10.0 - 15.0 33 10 26 25 1491600000
VG 21-Exi BL PG 21 13.0 - 19.0 40 11 32 20 1491700000
VG 29-Exi BL PG 29 17.0 - 25.0 41 12 41 20 1491800000
VG 36-Exi BL PG 36 24.0 - 32.0 49 14 52 10 1491900000
VG 42-Exi BL PG 42 28.0 - 38.0 56 16 59 10 1492000000
VG 48-Exi BL PG 48 34.0 - 44.0 60 16 65 5 1718980000
all sizes in mm
Technical data
Material: Polyamide
Sealing: Santoprene
Temperature: -40°C ... +90°C
Protection class: IP66 (with thread sealing ring)
Type GWDR ...-NP = IP68/5 bar)
ATEX granted
Colour: similar Blue RAL 5012
For use in explosion endangered areas (EEX i). These cable
glands are tested for higher safety specifications with certified
conformity to approvals LCIE 97ATEX6007X. The clamping
profile is used as an internal strain relief. The sealing ring is con-
structed with a membrane against dust, which can be easily
pierced.
Plastic cable glands for EExe-areas Plastic cable glands for EExi-areas
T
L
L1
Thread
L
L1
Thread
T
Cable glands
53
Cable Glands
Plastic cable glands with strain relief spiral cap Cable Gland ADE 1F
Cable gland specially for moveable connections.; Approvals to
VDE and UL; halogen-free.
Reduced clamping range on request
EN 50262: metric
For use in hazardous areas
EEx e II,
EEx d IIB,
EEx d II C ≤2000 cm3
These cable glands are certified in accordance with
LCIE 97ATEX6008X.
Technical data
Material: Polyamide 6
Sealing: Neoprene
Temperature: -40°C...+70°C (peak 150°C)
Protection class: IP 68 / 5 bar with GWDR
Colour: similar grey RAL 7035 (on request 9005)
Technical data
Material: Nickel plated brass (on request stainless steel)
Sealing: Neoprene
Temperature: -40 °C - 100 °C
Protection class: IP 68 (10 bar)
ATEX available
Ordering data
Type Thread Clamp range L L1 SW Qty. Cat. No.
Metric.plastic-KV with strain relief spiral cap
VGM12-K68 SKS M 12 x 1.5 3.0 - 6.5 66.5 8 15 100 1776700000
VGM16-K68 SKS M 16 x 1.5 5.0 - 10.0 80 10 22 50 1776710000
VGM20-K68 SKS M 20 x 1.5 6.0 - 12.0 106 11 24 50 1778860000
VGM20-K68 SKS M 20 x 1.5 10.0 - 14.0 106 15 27 50 1776720000
VGM25-K68 SKS M 25 x 1.5 13.0 - 18.0 129 15 33 25 1776730000
PG plastic cable glands with strain relief spiral cap
VG 7-K68 SKS PG 7 3.0 - 6.5 62 8 15 50 1720470000
VG 9-K68 SKS PG 9 4.0 - 8.0 78 8 19 50 1720480000
VG 11-K68 SKS PG 11 5.0 - 10.0 84 8 22 50 1720490000
VG 13.5-K68 SKS PG 13.5 6.0 - 12.0 105 9 24 50 1720500000
VG 16-K68 SKS PG 16 10.0 - 14.0 117 10 27 25 1720510000
VG 21-K68 SKS PG 21 13.0 - 18.0 130 11 33 20 1720520000
all sizes in mm
Ordering data
Type Thread
Protecting cap Clamp range
LL1SW1 SW2 Qty. Cat. No.
Metric cable glands
VG ADE 1/M 12 Exe/d M 12 x 1.5 4 4
.0
- 8
.0
35 15 15 15 5 173669
0000
VG ADE 1/M 16 Exe/d M 16 x 1.5 5 6
.0
- 12
.0
37 15 19 19 5 173670
0000
VG ADE 1/M 20 Exe/d M 20 x 1.5 6 8.5 - 16
.0
40 15 24 24 2 173671
0000
VG ADE 1/M 25 Exe/d M 25 x 1.5 7 12
.0
- 20.5 42 15 30 30 2 173672
0000
VG ADE 1/M 32 Exe/d M 32 x 1.5 8 16
.0
- 27.5 49 15 41 41 2 173673
0000
VG ADE 1/M 40 Exe/d M 40 x 1.5 9 21
.0
- 34
.0
51 15 48 48 2 173674
0000
VG ADE 1/M 50 Exe/d M 50 x 1.5 10 27
.0
- 41
.0
55 16 55 55 1 173675
0000
VG ADE 1/M 63 Exe/d M 63 x 1.5 12 40
.0
- 56
.0
60 17 72 72 1 173676
0000
VG ADE 1/M 75 Exe/d M 75 x 1.5 13 47
.0
- 65
.0
67 18 85 85 1 173677
0000
VG ADE 1/M 80 Exe/d M 80 x 2 14 54
.0
- 73
.0
76 20 95 95 1 173678
0000
VG ADE 1/M 90 Exe/d M 90 x 2 15 63
.0
- 82
.0
83 22 110 110 1 173679
0000
VG ADE 1/M 100 Exe/d M 100 x 2 16 72
.0
- 92
.0
84 22 120 120 1 173680
0000
all sizes in mm
T
Cable glands
54
ADE 4F EMC cable glands
For use in hazardous areas:
EEx e II,
EEx d IIB,
EEx d II C ≤2000 cm3
These cable glands are certified in accordance with
LCIE 97ATEX6008X.
On request: silicone sealing ring, halogen-free,
Working temperature: -70 °C - +220 °C.
High shielding factor up to 100 dB. An endless lock washer is
pressed against the cable armour by two conical rings; thus
guaranteeing a reliable and safe contact. This ensures that the
shield braiding is inserted into the enclosure.
Technical data
Material: Nickel plated brass (on request stainless steel)
Sealing: Neoprene
Temperature: -40 °C - 100 °C
Protection class: IP 68 (10 bar)
ATEX available
Technical data
Material: Nickel plated brass
Sealing: TPE-V /thermoplastic Elastomer
O-Ring: Perbunan
Temperature: -40°C ... +135°C (peak 150°C)
Protection class: IP 68
Ordering data
Type Thread Sealing Cable Armoured Cable L L1 SW1 SW2 Qty. Cat. No.
ring Ø outside Ø inside
Metric gland
VG ADE 4F/M 12 Exe/d M 12 x 1.5 5 6.0 - 12.0 0 - 0.9 4.0 - 8.0 51 15 19 19 5 1736810000
VG ADE 4F/M 16 Exe/d M 16 x 1.5 6 8.5 - 16.0 0 - 1.25 6.0 - 12.0 57 15 24 24 5 1736820000
VG ADE 4F/M 20 Exe/d M 20 x 1.5 7 12.0 - 21.0 0 - 1.25 8.5 - 15.5 61 15 30 30 2 1736830000
VG ADE 4F/M 25 Exe/d M 25 x 1.5 8 16.0 - 27.5 0 - 1.6 12.0 - 20.5 71 15 41 41 2 1736840000
VG ADE 4F/M 32 Exe/d M 32 x 1.5 9 21.0 - 34.0 0 - 1.6 16.0 - 27.5 78 15 48 48 2 1736850000
VG ADE 4F/M 40 Exe/d M 40 x 1.5 10 27.0 - 41.0 0 - 2 21.0 - 34.0 83 15 55 55 2 1736860000
VG ADE 4F/M 50 Exe/d M 50 x 1.5 11 33.0 - 48.0 0 - 2.5 27.0 - 41.0 90 16 64 64 1 1736870000
VG ADE 4F/M 63 Exe/d M 63 x 1.5 13 47.0 - 65.0 0 - 2.5 40.0 - 56.0 102 17 85 85 1 1736880000
VG ADE 4F/M 75 Exe/d M 75 x 1.5 14 54.0 - 74.0 0 - 2.5 47.0 - 65.0 110 18 95 95 1 1736890000
VG ADE 4F/M 80 Exe/d M 80 x 2 15 63.0 - 83.0 0 - 3.15 54.0 - 73.0 124 20 110 110 1 1736900000
VG ADE 4F/M 90 Exe/d M 90 x 2 16 72.0 - 93.0 0 - 3.15 63.0 - 82.0 130 22 120 120 1 1736910000
all sizes in mm
Ordering data
Type Thread Clamp range Armour-Ø L SW Qty. Cat. No.
Metric cable glands brass
VG EMC M18x1.5 M 18x1.5 6.0 - 9.5 3.0 - 7.0 26.7 24 5 1706920000
VG EMC M20x1.5 M 20x1.5 7.0 - 11.0 4.0 - 8.5 26.7 24 5 1706940000
VG EMC M24x1.5 M 24x1.5 16.5 - 14.0 8.0 - 12.0 33.5 30 5 1706930000
VG EMC M25x1.5 M 25x1.5 16.5 - 14.0 8.0 - 12.0 33.5 30 5 1706950000
PG cable gland brass
VG EMC Pg 7/9 PG 7 / 9 4.0 - 6.0 1.5 - 4.0 32.9 17 20 1713870000
VG EMC Pg 9/11 PG 9 / 11 6.5 - 9.5 2.5 - 6.5 32.9 20 20 1706860000
VG EMC Pg 11 PG 11 6.0 - 9.0 3.5 - 7.5 39.6 24 20 1706870000
VG EMC Pg 13.5 PG 13.5 7.0 - 10.5 4.0 - 8.5 39.0 24 10 1706880000
VG EMC Pg 16 PG 16 10.0 - 14.0 8.0 - 13.0 40.5 30 10 1706890000
VG EMC Pg 16 PG 16 14.0 - 18.0 8.0 - 13.0 40.5 30 10 1713880000
VG EMC Pg 21 PG 21 14.0 - 18.0 10.0 - 15.0 40.5 35 10 1706900000
VG EMC Pg 21 PG 21 17.0 - 28.0 12.5 - 17.5 40.5 35 10 1713890000
VG EMC Pg 29 PG 29 22.0 - 26.0 15.0 - 21.0 43.5 40 5 1706910000
VG EMC Pg 29 PG 29 25.0 - 29.0 18.0 - 25.0 55.3 40 5 1713900000
VG EMC Pg 36 PG 36 32.0 - 27.0 18.0 - 25.0 55.3 40 5 1770410000
all sizes in mm
L
Thread
L
L1
SW 1
SW 2
T
Cable glands
55
Cable Glands
Lock nut with EMCLock nut brass
These lock nuts are equipped with six cutting elements, which
cut into the painted insulating layer of the enclosure; thus creat-
ing an optimum contact.
Lock nut for securing brass cable glands in accordance with
DIN 46320
Technical data
Material: Nickel plated brass
Technical data
Material: Nickel plated brass (on request stainless steel)
Ordering data
Type Thread D S SW Qty. Cat. No.
Metric gland lock nut EMC brass approx.
SKMU EMC M10 M 10 x 1 3.10 1.0 12 100 1777600000
SKMU EMC M12 M 12 x 1.5 3.60 1.0 14 100 1777610000
SKMU EMC M16 M 16 x 1.5 3.60 1.0 18 100 1777620000
SKMU EMC M20 M 20 x 1.5 3.60 1.0 23 100 1777630000
SKMU EMC M25 M 25 x 1.5 3.60 1.0 28 50 1777640000
SKMU EMC M32 M 32 x 1.5 4.10 1.0 36 25 1777650000
SKMU EMC M40 M 40 x 1.5 4.60 1.0 44 25 1777660000
SKMU EMC M50 M 50 x 1.5 4.60 1.0 54 10 1777670000
SKMU EMC M63 M 63 x 1.5 6.60 1.0 70 10 1777680000
PG gland lock nut brass with EMC
SKMU EMC Pg7 PG 7 4.7 1.0 15 20 1718900000
SKMU EMC Pg9 PG 9 4.7 1.0 18 20 1718910000
SKMU EMC Pg11 PG 11 4.7 1.0 21 20 1718920000
SKMU EMC Pg13.5 PG 13.5 4.7 1.0 23 10 1718930000
SKMU EMC Pg16 PG 16 4.7 1.0 26 10 1718940000
SKMU EMC Pg21 PG 21 5.2 1.0 32 10 1718950000
SKMU EMC Pg29 PG 29 5.7 1.0 41 5 1718960000
all sizes in mm
Ordering data
Type Thread D SW Qty. Cat. No.
Metric gland lock nut brass
SKMU M 12-MS M 12 x 1.5 2.8 14 50 1772360000
SKMU M 16-MS M 16 x 1.5 2.8 18 50 1736990000
SKMU M 20-MS M 20 x 1.5 3 23 50 1737000000
SKMU M 25-MS M 25 x 1.5 3 28 25 1737010000
SKMU M 32-MS M 32 x 1.5 4 36 20 1737020000
SKMU M 40-MS M 40 x 1.5 4.5 44 10 1737030000
SKMU M 50-MS M 50 x 1.5 5 54 5 1737040000
SKMU M 63-MS M 63 x 1.5 6 70 5 1737050000
SKMU M 75-MS M 75 x 1.5 8 85 5 1737060000
PG gland lock nut brass
SKMU Pg7-MS PG 7 2.8 15 50 1694070000
SKMU Pg9-MS PG 9 2.8 18 50 1694080000
SKMU Pg11-MS PG 11 3.0 21 50 1694090000
SKMU Pg13.5-MS PG 13.5 3.0 23 50 1694100000
SKMU Pg16-MS PG 16 3.0 26 25 1694110000
SKMU Pg21-MS PG 21 3.5 32 20 1719200000
SKMU Pg29-MS PG 29 4.0 41 20 1719210000
SKMU Pg36-MS PG 36 5.0 51 10 1719220000
SKMU Pg42-MS PG 42 5.0 58 10 1719230000
SKMU Pg48-MS PG 48 5.5 64 5 1719240000
all sizes in mm
D
S
Thread
D
Thread
Cable glands
56
Lock nut Plastic Lock nut Plastic Ex
Lock nut for securing plastic cable glands in accordance with
DIN 46320. Lock nut for securing cable glands used in Ex-areas in
accordance with LCIE 97ATEX6007X.
Technical data
Material: Polyamide, glass fibre reinforced
Temperature: -40°C ... +70°C
Colour: similar grey RAL 7035
DIN: 46320
Technical data
Material: Polyamide
Temperature: -40°C ... +70°C
Colour: similar black RAL 9005
Ordering data
Type Thread D SW Qty. Cat. No.
Metric gland lock nut plastic grey
SKMU M12-K GR M 12 x 1.5 5 18 50 1772440000
SKMU M16-K GR M 16 x 1.5 5 22 50 1772450000
SKMU M20-K GR M 20 x 1.5 6 26 50 1772460000
SKMU M25-K GR M 25 x 1.5 6 32 25 1772470000
SKMU M32-K GR M 32 x 1.5 7 41 20 1772480000
SKMU M40-K GR M 40 x 1.5 7 50 20 1772490000
SKMU M50-K GR M 50 x 1.5 8 60 10 1772500000
SKMU M63-K GR M 63 x 1.5 8 75 10 1772510000
PG gland lock nut plastic grey
SKMU Pg7-K GR PG 7 5.0 19 50 1697440000
SKMU Pg9-K GR PG 9 5.0 22 50 1697450000
SKMU Pg11-K GR PG 11 5.0 24 50 1697460000
SKMU Pg13.5-K GR PG 13.5 6.0 27 50 1697470000
SKMU Pg16-K GR PG 16 6.0 30 25 1697480000
SKMU Pg21-K GR PG 21 7.0 36 20 1698220000
SKMU Pg29-K GR PG 29 7.0 46 20 1698230000
SKMU Pg36-K GR PG 36 8.0 60 10 1698240000
SKMU Pg42-K GR PG 42 8.0 65 10 1698250000
SKMU Pg48-K GR PG 48 8.0 70 5 1719090000
all sizes in mm
Ordering data
Type Thread D SW Qty. Cat. No.
Metric gland lock nut plastic Ex
SKMU M 16-K SW M 16 x 1.5 5.0 22 50 1736920000
SKMU M 20-K SW M 20 x 1.5 6.0 26 50 1736930000
SKMU M 25-K SW M 25 x 1.5 6.0 32 25 1736940000
SKMU M 32-K SW M 32 x 1.5 7.0 41 20 1736950000
SKMU M 40-K SW M 40 x 1.5 7.0 50 10 1736960000
SKMU M 50-K SW M 50 x 1.5 8.0 60 5 1736970000
SKMU M 63-K SW M 63 x 1.5 8.0 75 5 1736980000
PG gland lock nut plastic Ex
SKMU Pg7-K SW PG 7 5.0 19 50 1719100000
SKMU Pg9-K SW PG 9 5.0 22 50 1719110000
SKMU Pg11-K SW PG 11 5.0 24 50 1719120000
SKMU Pg13.5-K SW PG 13.5 6.0 27 50 1719130000
SKMU Pg16-K SW PG 16 6.0 30 25 1719140000
SKMU Pg21-K SW PG 21 7.0 36 20 1719150000
SKMU Pg29-K SW PG 29 7.0 46 20 1719160000
SKMU Pg36-K SW PG 36 8.0 60 10 1719170000
SKMU Pg42-K SW PG 42 8.0 65 10 1719180000
SKMU Pg48-K SW PG 48 8.0 70 5 1719190000
all sizes in mm
D
Thread
D
Thread
T
Cable glands
57
Cable Glands
Ordering data
Type Thread D1 D2 S Qty. Cat. No.
Metric threaded sealing rings, neoprene
GWDR M 16-NP M 16 22 16 1.2 20 1736230000
GWDR M 20-NP M 20 24 20 1.2 20 1736240000
GWDR M 25-NP M 25 30 25 1.5 20 1736250000
GWDR M 32-NP M 32 42 32 1.5 20 1736260000
GWDR M 40-NP M 40 52 40 1.5 10 1736270000
GWDR M 50-NP M 50 63 50 1.5 10 1736280000
GWDR M 63-NP M 63 77 63 2 10 1736290000
PG threaded sealing rings, neoprene
GWDR Pg7-NP PG 7 17 11.6 1.2 50 1719540000
GWDR Pg9-NP PG 9 21 14.0 1.2 50 1719550000
GWDR Pg11-NP PG 11 24 17.0 1.2 50 1719560000
GWDR Pg13.5-NP PG 13.5 27 19.5 1.2 50 1719570000
GWDR Pg16-NP PG 16 30 22.5 1.2 25 1719580000
GWDR Pg21-NP PG 21 35 28.3 1.5 20 1719590000
GWDR Pg29-NP PG 29 45 37.0 1.5 20 1719600000
GWDR Pg36-NP PG 36 60 47.0 1.5 10 1719610000
GWDR Pg42-NP PG 42 65 54.0 1.5 10 1719620000
GWDR Pg48-NP PG 48 71 59.3 1.5 5 1719630000
all sizes in mm
Threaded sealing rings
To increase the protection class of cable glands in Ex areas in
accordance with LCIE 97ATEX6007X.
Ordering data
Type Thread D1 D2 S Qty. Cat. No.
Metric threaded sealing rings, polyethylene
GWDR M12-PO M 12 x 1.5 16 12 1.5 100 1777920000
GWDR M16-PO M 16 x 1.5 20 16 1.5 100 1777930000
GWDR M20-PO M 20 x 1.5 24 20 2.0 100 1777940000
GWDR M25-PO M 25 x 1.5 29 25 2.0 100 1777950000
GWDR M32-PO M 32 x 1.5 36 32 2.0 50 1777960000
GWDR M40-PO M 40 x 1.5 44 40 2.0 50 1777970000
GWDR M50-PO M 50 x 1.5 54 50 2.0 25 1777980000
GWDR M63-PO M 63 x 1.5 67 63 2.0 10 1777990000
PG Threaded sealing rings, polyethylene
GWDR Pg7-PO PG 7 16.5 12.5 1.6 50 1719440000
GWDR Pg9-PO PG 9 19 15.3 1.6 50 1719450000
GWDR Pg11-PO PG 11 22.5 18.6 1.8 50 1719460000
GWDR Pg13.5-PO PG 13.5 25 20.4 1.8 50 1719470000
GWDR Pg16-PO PG 16 27 22.5 1.8 25 1719480000
GWDR Pg21-PO PG 21 33.5 28.5 2.2 20 1719490000
GWDR Pg29-PO PG 29 43.5 37.0 2.2 20 1719500000
GWDR Pg36-PO PG 36 55 47.0 2.7 10 1719510000
GWDR Pg42-PO PG 42 63 54.0 3.2 10 1719520000
GWDR Pg48-PO PG 48 69 59.3 3.2 5 1719530000
all sizes in mm
Threaded sealing rings
To increase the protection class of cable glands.
Technical data
Material: Neoprene
DIN: 46320
Technical data
Material: Polyethylene
DIN: 46320
D 1
D 2
S
D 1
D 2
S
Cable glands
58
Ordering data
Type Thread L L1 Head-Ø Qty. Cat. No.
Metric sealing plug, brass
VP M16 - MS65 M 16 5.0 18 100 1777730000
VP M20 - MS65 M 20 6.5 22 100 1777740000
VP M25 - MS65 M 25 7.0 28 100 1777750000
VP M32 - MS65 M 32 8.0 35 50 1777760000
VP M40 - MS65 M 40 8.0 45 50 1777770000
VP M50 - MS65 M 50 9.0 55 25 1777780000
VP M63 - MS65 M 63 10.0 68 10 1777790000
PG sealing plug, brass
VP 7-MS65 PG 7 8 5 16 50 0521600000
VP 9-MS65 PG 9 7.9 4.5 19 50 0294700000
VP 11-MS65 PG 11 7.9 4.5 22 50 0294800000
VP 13.5-K65 PG 13.5 9.5 6 24 50 0294900000
VP 16-MS65 PG 16 9 6 26 25 0295000000
VP 21-MS65 PG 21 10 6 32 20 0295100000
VP 29-MS65 PG 29 12 8 39 20 0501100000
VP 36-MS65 PG 36 15 9 50 10 0501200000
VP 42-MS65 PG 42 16 10 57 10 0501300000
VP 48-MS65 PG 48 16 10 64 5 1719270000
all sizes in mm
Sealing plug, brass
Technical data
Material: Nickel plated brass
Sealing: O-Ring Perbunan
Temperature: -40°C ... +100°C
Protection class: IP65
Ordering data
Type Thread L L1 Head Ø Qty. Cat. No.
Metric sealing plug, plastic
VP M12-K54 M12 x 1.5 10.0 6 15 100 1776930000
VP M16-K54 M16 x 1.5 11.5 7 19 100 1776920000
VP M20-K54 M20 x 1.5 12.5 7.5 22 100 1776910000
VP M25-K54 M25 x 1.5 15.0 11 27 100 1776900000
VP M32-K54 M32 x 1.5 16.0 11 34 100 1776940000
VP M40-K54 M40 x 1.5 18.0 12 42 50 1776950000
VP M50-K54 M50 x 1.5 20.0 13 52 50 1776960000
VP M63-K54 M63 x 1.5 20.0 14 65 50 1776970000
PG sealing plug, plastic
VP 7-K54 PG 7 8 6 15 50 1719250000
VP 9-K54 PG 9 9 6 19 50 0294760000
VP 11-K54 PG 11 10.5 6.5 22 50 0294860000
VP 13.5-K54 PG 13.5 9.5 6 25 50 0294960000
VP 16-K54 PG 16 9.5 6 27 25 0295060000
VP 21-K54 PG 21 11 8 33 20 0295160000
VP 29-K54 PG 29 12 8 44 20 0501160000
VP 36-K54 PG 36 15 10 55 10 0501260000
VP 42-K54 PG 42 16 10 62 10 0501360000
VP 48-K54 PG 48 16 12 69 5 1719260000
all sizes in mm
Sealing plug, plastic
Technical data
Material: Polyamide, glass fibre reinforced
Temperature: -40°C ... +100°C
Protection class: IP54 (with thread sealing ring Type GWDR ...-PO = IP66)
Colour: similar Grey RAL 7035
DIN: 46320
Self-sealing version with O-ring made of perbunan.
Also available with a hexagon head.
Glass-fibre reinforced polyamide offers excellent resistance to
numerous chemicals.
L
L1
Thread
Ø
L
L1
Thread
Ø
Cable glands
59
Cable Glands
Technical data
Material: Polyamide
Temperature: -40°C ... +100°C
Protection class: IP54 (with thread sealing ring Type GWDR ...-PO = IP66)
ATEX granted
Colour: similar Black RAL 9005
Sealing plug plastic EExe Sealing plug brass EExe / EExd
Technical data
Material: Nickel plated brass
Temperature: -40°C ... +100°C
Protection class: IP54 (with thread sealing ring Type GWDR ...-NP = IP66)
ATEX granted
Sealing plugs for Ex areas in accordance with LCIE 97ATEX6003X.
Also available with metric ISO thread Hexagon head version for Ex-areas (EExe II).
Approvals in accordance with LCIE 98ATEX0001X.
Also available with metric ISO thread.
Ordering data
Type Thread L L1 SW Qty. Cat. No.
Metric sealing plug, plastic EExe
VP M 16-Exe SW M 16 x 1.5 19 15 19 50 1737070000
VP M 20-Exe SW M 20 x 1.5 19 15 23 50 1737080000
VP M 25-Exe SW M 25 x 1.5 20 15 28 25 1737090000
VP M 32-Exe SW M 32 x 1.5 20.5 15 36 20 1737100000
VP M 40-Exe SW M 40 x 1.5 20.5 15 44 10 1737110000
VP M 50-Exe SW M 50 x 1.5 21 15 54 5 1737120000
VP M 63-Exe SW M 63 x 1.5 21.5 15 67 5 1737130000
PG sealing plug, plastic EExe
VP 7-Exe SW PG 7 12 8 15 50 1719280000
VP 9-Exe SW PG 9 14.5 10 19 50 1719290000
VP 11-Exe SW PG 11 15 10.5 22 50 1569380000
VP 13.5-Exe SW PG 13.5 16 11 24 50 1569390000
VP 16-Exe SW PG 16 17 12 27 25 1569400000
VP 21-Exe SW PG 21 18 12.5 32 20 1569410000
VP 29-Exe SW PG 29 19 13.5 40 20 1719300000
VP 36-Exe SW PG 36 21 15 54 10 1719310000
VP 42-Exe SW PG 42 21.5 15 59 10 1719320000
VP 48-Exe SW PG 48 22 15.5 64 5 1719330000
all sizes in mm
Ordering data
Type Thread L L1 SW Qty. Cat. No.
Metric sealing plug, brass EExe
VP M 16-Exe SW M 16 x 1.5 18 15 18 50 1737140000
VP M 20-Exe SW M 20 x 1.5 18 15 23 50 1737150000
VP M 25-Exe SW M 25 x 1.5 18.5 15 28 25 1737160000
VP M 32-Exe SW M 32 x 1.5 19 15 36 20 1737170000
VP M 40-Exe SW M 40 x 1.5 19 15 44 10 1737180000
VP M 50-Exe SW M 50 x 1.5 21 16 54 5 1737190000
VP M 63-Exe SW M 63 x 1.5 24 17 67 5 1737200000
PG sealing plug, brass EExe
VP 7-Exe MS PG 7 18 15 15 50 1719340000
VP 9-Exe MS PG 9 18 15 18 50 1719350000
VP 11-Exe MS PG 11 18 15 21 50 1719360000
VP 13.5-Exe MS PG 13.5 18 15 23 50 1719370000
VP 16-Exe MS PG 16 18 15 26 25 1719380000
VP 21-Exe MS PG 21 18 15 32 20 1719390000
VP 29-Exe MS PG 29 19 15 41 20 1719400000
VP 36-Exe MS PG 36 20 15 51 10 1719410000
VP 42-Exe MS PG 42 20 15 58 10 1719420000
VP 48-Exe MS PG 48 20.5 15 64 5 1719430000
all sizes in mm
L1
Thread
L1
Thread
TT
Cable glands
60
Adaptors
Male thread 3” NPT 2
1/2
” NPT 2” NPT 1
1/2
“ NPT 1
1/4
“ NPT 1“ NPT
3/4
“ NPT
1/2
“ NPT M 75 M 63 M 50 M 40 M 32 M 25 M 20 M 16
Female thread
M 16
1737420000 1737430000 1737440000 1737450000 1737460000 1737470000 1737480000 1737490000 1737500000 1737510000 1737520000 1737530000 1737540000 1737550000 1737560000 1737570000
M 20
1737580000 1737590000 1737600000 1737610000 1737620000 1737630000 1737640000 1737650000 1737660000 1737670000 1737680000 1737690000 1737700000 1737710000 1737720000 1737730000
M 25
1737740000 1737750000 1737760000 1737770000 1737780000 1737790000 1737800000 1737810000 1737820000 1737830000 1737840000 1737850000 1737860000 1737870000 1737880000
M 32
1737890000 1737900000 1737910000 1737920000 1737930000 1737940000 1737950000 1737960000 1737970000 1737980000 1737990000 1738000000 1738010000
M 40
1738020000 17380300001738040000 1738050000 1738060000 1738070000 1738080000 1738090000 1738100000 1738110000 1738120000
M 50
1738130000 17381400001738150000 1738160000 1738170000 1738180000 1738190000 1738200000 1738210000
M 63
1738220000 1738230000 1738240000 1738250000 1738260000 1738270000 1738280000
M 75
1738290000 1738300000 1738310000 1738320000 1738330000
1/2
“ NPT
1738340000 1738350000 1738360000 1738370000 1738380000 1738390000 1738400000 1738410000 17384200001738430000 1738440000 17384500001738460000 1738470000 1738480000 1738490000
3/4
“ NPT
1738500000 1738510000 1738520000 1738530000 1738540000 1738550000 1738560000 1738570000 1738580000 1738590000 17386000001738610000 1738620000 1738630000 1738640000
1“ NPT
1738650000 1738660000 1738670000 1738680000 1738690000 1738700000 1738710000 1738720000 1738730000 1738740000 1738750000 1738760000
1 1/4
“ NPT
1738770000 1738780000 1738790000 1738800000 1738810000 1738820000 17388300001738840000 1738850000 1738860000 1738870000
11/2
“ NPT
1738880000 1738890000 1738900000 1738910000 1738920000 1738930000 1738940000 1738950000 1738960000
2” NPT
1738970000 1738980000 1738990000 1739000000 1739010000 1739020000 1739030000
2
1/2
” NPT
1739040000 1739050000 1739060000 1739070000 1739080000
3” NPT
1739090000 1739100000 1739110000
T
Technical data
Material: Nickel plated brass
Temperature: -40°C ... +100°C
Protection class:
IP54 (with thread sealing ring Type GWDR ...-NP = IP66)
Approval: in accordance with LCIE 97ATEX6001X
Metric PG adaptors, available soon.
Please contact us
Cable glands
61
Cable Glands
Thread
Technical data
Material: Polyethylene
Temperature: -20°C ... +70°C
Protection class: IP 54
Colour: similar grey RAL 7035
Closed version which can be can also be used as as a simple
sealing plug
Ordering data
Type Thread L1 Qty. Cat. No.
PG seal stopper
DN Pg9 PG 9 9.5 50 1719640000
DN Pg11 PG 11 10 50 1719650000
DN Pg13.5 PG 13.5 12 50 1719660000
DN Pg16 PG 16 12 25 1719670000
DN Pg21 PG 21 14 20 1719680000
DN Pg29 PG 29 16 20 1719690000
DN Pg36 PG 36 19 10 1719700000
DN Pg42 PG 42 23 10 1719710000
DN Pg48 PG 48 24 5 1719720000
all sizes in mm
Stopper
L1
Seal stopper
In order to improve conductivity, the earthing washer is inserted
into the cable gland when using lead-sheathed cables.
Please refer to the mounting instructions.
Technical data
Material: brass
Ordering data
Type Cable Ø D L Qty. Cat. No.
EA VS No. 6 6.0 - 11.0 13.9 4 20 1736370000
EA VS No. 7 9.0 - 15.0 18.3 4.8 20 1736380000
EA VS No. 8 12.0 - 20.0 23.8 5.7 20 1736390000
EA VS No. 9 18.0 - 26.5 31 7.2 20 1736400000
EA VS No. 10 21.0 - 32.5 38.3 8.2 20 1736410000
EA VS No. 11 28.0 - 39.5 45.3 8.8 20 1736420000
EA VS No. 12 33.0 - 46.5 52.8 9.5 20 1736430000
EA VS No. 13 40.0 - 54.5 60.8 10.1 10 1736440000
EA VS No. 14 46.5 - 61.0 71 11.4 10 1736450000
EA VS No. 15 54.0 - 72.5 60.5 12.6 10 1736460000
EA VS No. 16 63.0 - 81.5 89.5 12.6 5 1736470000
all sizes in mm
Mounting instructions
Accessories
Earthing washer, brass for lead-sheathed cables
Cable glands
62
Technical data
Material: PVC
Temperature: -40 °C - 100 °C
Colour: Black
The protective cap is simply slid or pulled over the cable gland.
The use of protective caps achieves are more effective sealing of
the cable glands via the exterior cable sheath.
This method of sealing protects cable glands in corrosive atmo-
spheres.
Ordering data
Type Cable Ø D L L1 Qty. Cat. No.
Protection cap No. 4 6.0 - 12.0 20 90 42 20 1736560000
Protection cap No. 5 6.0 - 12.0 20 90 42 20 1736570000
Protection cap No. 6 8.5 - 16.0 25 110 50 20 1736580000
Protection cap No. 7 10.0 - 21.0 31 110 50 20 1736590000
Protection cap No. 8 16.0 - 27.5 43 125 60 20 1736600000
Protection cap No. 9 21.0 - 34.0 50 135 70 20 1736610000
Protection cap No. 10 27.0 - 41.0 57 150 75 20 1736620000
Protection cap No. 11 33.0 - 48.0 67 165 80 10 1736630000
Protection cap No. 12 40.0 - 56.0 75 170 82 10 1736640000
Protection cap No. 13 47.0 - 65.0 89 190 97 10 1736650000
Protection cap No. 14 54.0 - 74.0 100 205 105 5 1736660000
Protection cap No. 15 63.0 - 83.0 115 245 120 5 1736670000
Protection cap No. 16 72.0 - 93.0 125 245 120 5 1736680000
all sizes in mm
Technical data
Material: Steel, nickel plated
Ordering data
Type Thread D1 D2 S Qty. Cat. No.
Metric safety washers
SZS M 16 M 16 – – – 10 1736300000
SZS M 20 M 20 32.8 21.5 1.5 10 1736310000
SZS M 25 M 25 39.8 26.5 1.9 10 1736320000
SZS M 32 M 32 49.3 32.8 1.5 10 1736330000
SZS M 40 M 40 64.5 42.2 1.8 5 1736340000
SZS M 50 M 50 80 53 1.8 5 1736350000
SZS M 63 M 63 100 64 1.9 5 1736360000
all sizes in mm
D1
D2
S
Accessories
Serated lock washer Protecting cap (shroud)
Cable glands
63
Cable Glands
Technical data
Material: Nickel plated brass
The earthing ring is slid over the entry thread. An improved con-
nection between the enclosure and earth or other conductive
components is created by the use of earthing rings.
Ordering data
Type Thread A B C D E Qty. Cat. No.
Metric safety washers, brass
EA-RING MS/M 16 M 16 48.75 30 6.75 24.50 13 20 1736480000
EA-RING MS/M 20 M 20 53.80 33 7 28.60 13 20 1736490000
EA-RING MS/M 25 M 20 61.50 36 10.50 34 17 20 1736500000
EA-RING MS/M 32 M 32 73 41 12.20 42 22 20 1736510000
EA-RING MS/M 40 M 40 86.50 44.50 13.50 54 30 10 1736520000
EA-RING MS/M 50 M 50 111.50 58 13.50 67 40 10 1736530000
EA-RING MS/M 63 M 63 125.50 67 13.50 77 40 10 1736540000
EA-RING MS/M 75 M 75 137.50 73 13.50 89 40 10 1736550000
all sizes in mm
Accessories
Earthing ring, brass
Technical data
Operating temperature - 40°C to + 100°C
Protection class IP 69 K
Material PBT- GF 20
Colour similar to grey RAL 7038 / black RAL 9005
Connection thread PG7
Osmotic potential of membrane > 0.6 bar (membrane side)
Air flow rate, at 70 mbar. ≥12I /h
Membrane characteristics water and oil resistant
Weathering behaviour No or very slight yellowing
(Xenotest 3.600 h) and alteration of the surface
No significant alteration to the
mechanical characteristics
Ordering data
Type Thread Qty. Cat. No.
DAE PG 7 grey PG7 10 1753530000
DAE M 12 black M12 10 1806480000
Enclosures for electrical and electronic modules are used in envi-
ronments with harsh climate changes. Temperature fluctuations
can lead to considerable pressure fluctuations within a liquid-
tight container. If negative pressure levels resulting from temper-
ature fluctuations are sufficient, moist air will penetrate in to the
enclosure to compensate the pressure. After a number of tem-
perature fluctuation cycles, condensation can form in the enclo-
sure if ventilation via the seal is inadequate.
Our GORE-TEX®pressure compensation element, DAE PG,
protects electrical and electronic components against failure: the
enclosure can "breathe" even though according to IP standards
it is liquid-tight.
Pressure compensating
elements
Cable glands
64
Technical data
Material: Polyamide
Temperature: -20°C ... +70°C
Protection class: IP 65
Colour: similar black RAL 9005
We recommend the the use of EWS drain stoppers to prevent
the building up of condensation water within enclosures, and also
to guarantee sufficient ventilation.
PG 16
23
5
Ordering data
Type Thread Qty. Cat. No.
EWS PG16 PG 16 25 1719730000
EWS M 25x1.5 M 25 x 1.5 25 1719740000
Drain stopper
T
Technical data
Material: Körper BD 1 Blank brass or stainless steel 1.4404
BD 2 Blank brass or stainless steel 1.4404
DLP Blank brass or stainless steel 1.4404
Filter BD 1 Sinter nickel - chrom insert
BD 2 Sinter nickel - chrom insert
DLP Sinter nickel - chrom insert
Sealing BD 1 Nylon seal
BD 2 Nitril O-ring
DLP Nitril O-ring
Mounting: BD 1 Direct mounting in available M 16 x 1.5 connection thread
or with lock nut in 16-mm round hole
BD 2 Flanged fixing made with fourM 4 hexagon head screws
washer and self locking lock nut
DLP Direct mounting in available M 20 x 1.5 connection thread
or with lock nut in 20 mm round hole
Protection BD 1 IP 54 in accordance with IEC 529
class: BD 2 IP 54 in accordance with IEC 529
DLP IP 66
Approvals: BD 1 EEx e II i.a.w. EN 50019 Components certification 86B3174U
BD 2 EEx e II i.a.w. EN 50019 Components certification 86B3174U
DLP EEx e II i.a.w. SIRA99ATEX3050U
Ordering data
Type Material Qty. Cat. No.
BD 1 Brass 1 3883400000
BD 1 Stainless steel 1 3883500000
BD 2 Brass 1 3884300000
BD 2 Stainless steel 1 3884400000
DLP Brass 1 3080760000
DLP Stainless steel 1 3080770000
Breather Drains
T
BD 1
BD 2
DLP
99ATEX3050U
65
Cable Glands
