SURFACE MOUNT DISPLAY P/N: KPSC03-103 YELLOW Features Description 0.3 INCH DIGIT HEIGHT. The Yellow source color devices are made with Gallium LOW CURRENT OPERATION. EXCELLENT CHARACTER APPEARANCE. Arsenide Phosphide on Gallium Phosphide Yellow Light Emitting Diode. I.C. COMPATIBLE. MECHANICALLY RUGGED. GRAY FACE,WHITE SEGMENT. PACKAGE : 550PCS / REEL. RoHS COMPLIANT. Package Dimensions & Internal Circuit Diagram Notes: 1. All dimensions are in millimeters (inches), Tolerance is 0.25(0.01")unless otherwise noted. 2. Specifications are subject to change without notice. SPEC NO: DSAD0152 REV NO: V.4 DATE: NOV/19/2005 APPROVED: J. Lu CHECKED: Joe Lee DRAWN: Y.L.LI PAGE: 1 OF 4 Selection Guide Part No. Dice KPSC03-103 Iv (ucd) @ 10mA Lens Type YELLOW (GaAsP/GaP) WHITE DIFFUSED Min. Typ. 480 2290 Description Common Cathode,Rt. Hand Decimal. Electrical / Optical Characteristics at TA=25C Symbol Parameter Device peak Peak Wavelength Yellow D Dominant Wavelength 1/2 Typ. Max. Units Test Conditions 590 nm IF=20mA Yellow 588 nm IF=20mA Spectral Line Half-width Yellow 35 nm IF=20mA C Capacitance Yellow 20 pF VF=0V;f=1MHz VF Forward Voltage Yellow 2.1 2.5 V IF=20mA IR Reverse Current Yellow 10 uA VR = 5V Absolute Maximum Ratings at TA=25C Parameter Yellow Units Power dissipation 105 mW DC Forward Current 30 mA Peak Forward Current [1] 140 mA 5 V Reverse Voltage Operating / Storage Temperature -40C To +85C Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAD0152 REV NO: V.4 DATE: NOV/19/2005 APPROVED: J. Lu CHECKED: Joe Lee DRAWN: Y.L.LI PAGE: 2 OF 4 Yellow KPSC03-103 SPEC NO: DSAD0152 REV NO: V.4 DATE: NOV/19/2005 APPROVED: J. Lu CHECKED: Joe Lee DRAWN: Y.L.LI PAGE: 3 OF 4 KPSC03-103 Recommended Soldering Pattern (Units : mm) Tape Specifications (Units : mm) Remarks: If special sorting is required (e.g. binning based on forward voltage, Luminous intensity/ luminous flux, or wavelength), the typical accuracy of the sorting process is as follows: 1. Wavelength: +/-1nm 2. Luminous Intensity/ Luminous Flux: +/-15% 3. Forward Voltage: +/-0.1V Note: Accuracy may depend on the sorting parameters. SPEC NO: DSAD0152 REV NO: V.4 DATE: NOV/19/2005 APPROVED: J. Lu CHECKED: Joe Lee DRAWN: Y.L.LI PAGE: 4 OF 4