HIGH ISOLATION VOLTAGE
SOP MULTI PHOTOCOUPLER −NEPOC Series−
PHOTOCOUPLER
PS2701-1
DESCRIPTION
The PS2701-1 is an optically coupled isolator containing a GaAs light emitting diode and an NPN silicon
phototransistor.
This package is SOP (Small Outline Package) type and has shield effect to cut off ambient light.
It is designed for high density mounting applications.
FEATURES
PIN CONNECTION
(Top View)
1. Anode
2. Cathode
3. Emitter
4. Collector
43
12
• High isolation voltage (BV = 3 750 Vr.m.s.)
• SOP (Small Outline Package) type
• High-speed switching (tr = 3
µ
s TYP., tf = 5
µ
s TYP.)
• Ordering number of taping product: PS2701-1-F3, F4
• Safety standards
• UL approved: No. E72422
• BSI approved: No. 8219/8220
• CSA approved: No. CA 101391
• DIN EN60747-5-2 (VDE0884 Part2) approved: No. 40008902 (Option)
<R>
APPLICATIONS
• Hybrid IC
• Measuring instruments
• Power supply
• Programmable logic controllers
Document No. PN10240EJ03V0DS (3rd edition)
Date Published December 2008 NS
1988, 2008
The mark <R> shows major revised points.
The revised points can be easily searched by copying an "<R>" in the PDF file and specifying it in the "Find what:" field.
PS2701-1
PACKAGE DIMENSIONS (in millimeters)
4.0±0.5
7.0±0.3
4.4
0.5±0.3
0.15
+0.10
–0.05
2.0
0.1±0.1
2.1±0.2
2.54
0.4
+0.10
–0.05
0.25 M
MARKING EXAMPLE
<R>
Pb-Free Special version (Pb-Free and Halogen Free)
2701
M831
Trade Mark
Type Number
Assembly Lot
No. 1 pin Mark
M831
Week Assembled
Year Assembled
(Last 1 Digit)
CTR Rank Name
*1 Bar: Pb-Free
Remark "PS" and "-1" are omitted from original type number
*1
2701
M831
Trade Mark
Type Number
Assembly Lot
No. 1 pin Mark
M831
Week Assembled
Year Assembled
(Last 1 Digit)
CTR Rank Name
*1 Bar: Pb-Free and Halogen Free
Remark "PS" and "-1" are omitted from original type number
*1
Data Sheet PN10240EJ03V0DS
2
PS2701-1
ORDERING INFORMATION
<R>
Part Number Order Number Solder Plating
Specification Packing Style Safety Standard
Approval Application Part
Number*1
PS2701-1 PS2701-1-A Pb-Free Magazine case 100 pcs Standard products PS2701-1
PS2701-1-F3 PS2701-1-F3-A Embossed Tape 3 500 pcs/reel (UL, BSI, CSA
PS2701-1-F4 PS2701-1-F4-A approved)
PS2701-1-V PS2701-1-V-A Magazine case 100 pcs DIN EN60747-5-2
PS2701-1-V-F3 PS2701-1-V-F3-A Embossed Tape 3 500 pcs/reel (VDE0884 Part2)
PS2701-1-V-F4 PS2701-1-V-F4-A Approved (Option)
PS2701-1 PS2701-1Y-A Special
version Magazine case 100 pcs Standard products PS2701-1
PS2701-1-F3 PS2701-1Y-F3-A (Pb-Free and Embossed Tape 3 500 pcs/reel (UL, BSI, CSA
Halogen Free) approved)
PS2701-1-V PS2701-1Y-V-A Magazine case 100 pcs DIN EN60747-5-2
PS2701-1-V-F3 PS2701-1Y-V-F3-A Embossed Tape 3 500 pcs/reel (VDE0884 Part2)
Approved (Option)
*1 For the application of the Safety Standard, following part number should be used.
Data Sheet PN10240EJ03V0DS 3
PS2701-1
ABSOLUTE MAXIMUM RATINGS (TA = 25°C, unless otherwise specified)
Parameter Symbol Ratings Unit
Diode Forward Current (DC) IF 50 mA
Reverse Voltage VR 6 V
Power Dissipation Derating
∆
PD/°C 0.8 mW/°C
Power Dissipation PD 80 mW
Peak Forward Current*1 IFP 1 A
Transistor Collector to Emitter Voltage VCEO 40 V
Emitter to Collector Voltage VECO 6 V
Collector Current IC 80 mA
Power Dissipation Derating
∆
PC/°C 1.5 mW/°C
Power Dissipation PC 150 mW
Isolation Voltage*2 BV 3 750 Vr.m.s.
Operating Ambient Temperature TA –55 to +100 °C
Storage Temperature Tstg –55 to +150 °C
*1 PW = 100
µ
s, Duty Cycle = 1%
*2 AC voltage for 1 minute at TA = 25°C, RH = 60% between input and output
Pins 1-2 shorted together, 3-4 shorted together.
Data Sheet PN10240EJ03V0DS
4
PS2701-1
ELECTRICAL CHARACTERISTICS (TA = 25°C)
Parameter Symbol Conditions MIN. TYP. MAX. Unit
Diode Forward Voltage VF IF = 5 mA 1.1 1.4 V
Reverse Current IR VR = 5 V 5
µ
A
Terminal Capacitance Ct V = 0 V, f = 1 MHz 30 pF
Transistor Collector to Emitter Dark
Current ICEO IF = 0 mA, VCE = 40 V 100 nA
Coupled Current Transfer Ratio
(IC/IF)*1 CTR IF = 5 mA, VCE = 5 V 50 100 300 %
Collector Saturation
Voltage VCE (sat) IF = 10 mA, IC = 2 mA 0.3 V
Isolation Resistance RI-O VI-O = 1 kVDC 1011
Ω
Isolation Capacitance CI-O V = 0 V, f = 1 MHz 0.4 pF
Rise Time
*2 tr VCC = 5 V, IC = 2 mA, RL = 100 Ω 3
µ
s
Fall Time
*2 tf 5
*1 CTR rank
P: 150 to 300 (%)
L: 100 to 300 (%)
M: 50 to 150 (%)
*2 Test circuit for switching time
<R>
PW = 100 s,
Duty cycle = 1/10
µ
Pulse input V
CC
V
OUT
R
L
= 100 Ω50 Ω
I
F
Input
Output
90%
10%
t
r
t
d
t
f
t
s
t
on
t
off
Data Sheet PN10240EJ03V0DS 5
PS2701-1
TYPICAL CHARACTERISTICS (TA = 25°C, unless otherwise specified)
100
50
25
0
75
25 50 75 100
Ambient Temperature T
A
(°C)
Diode Power Dissipation P
D
(mW)
DIODE POWER DISSIPATION vs.
AMBIENT TEMPERATURE 200
150
100
50
025 50 75 100
Ambient Temperature T
A
(°C)
Transistor Power Dissipation P
C
(mW)
TRANSISTOR POWER DISSIPATION vs.
AMBIENT TEMPERATURE
1.5 mW/°C
50
20
0
40
30
10
6124 8
Collector to Emitter Voltage V
CE
(V)
Collector Current I
C
(mA)
COLLECTOR CURRENT vs.
COLLECTOR TO EMITTER VOLTAGE
0
I
F
= 30 mA
20 mA
10 mA
15 mA
5 mA
100
0.1
1
0.01
10
0.6 1.0 1.4 1.60.8 1.2
Forward Voltage V
F
(V)
Forward Current I
F
(mA)
FORWARD CURRENT vs.
FORWARD VOLTAGE
+25°C
0°C
–25°C
–55°C
T
A
= +100°C
+75°C
+50°C
10 000
0.1
100
1 000
10
1
–60 0 40 80–40 –20 20 60 100
Ambient Temperature T
A
(°C)
COLLECTOR TO EMITTER DARK
CURRENT vs. AMBIENT TEMPERATURE
Collector to Emitter Dark Current I
CEO
(nA)
V
CE
= 40 V
24 V
10 V
50
5
0.1
10
0.5
0.2
20
2
1
0.2 0.6 1.00.0 0.4 0.8
Collector Saturation Voltage V
CE (sat)
(V)
Collector Current I
C
(mA)
COLLECTOR CURRENT vs.
COLLECTOR SATURATION VOLTAGE
I
F
= 25 mA
10 mA
5 mA
2 mA
1 mA
Remark The graphs indicate nominal characteristics.
Data Sheet PN10240EJ03V0DS
6
PS2701-1
1.2
0.6
0.0
0.8
1.0
0.4
0.2
02550 100–50 –25 75
Ambient Temperature T
A
(°C)
NORMALIZED CURRENT TRANSFER
RATIO vs. AMBIENT TEMPERATURE
Normalized Current Transfer Ratio CTR
Normalized to 1.0
at T
A
= 25°C,
I
F
= 5 mA, V
CE
= 5 V
300
250
150
50
0
200
100
0.05 0.5 5 50
0.1 1 10
Forward Current I
F
(mA)
Current Transfer Ratio CTR (%)
CURRENT TRANSFER RATIO vs.
FORWARD CURRENT
V
CE
= 5 V
Load Resistance R
L
(Ω)
SWITCHING TIME vs.
LOAD RESISTANCE
Switching Time t ( s)
µ
V
CC
= 5 V,
I
C
= 2 mA
100
0.5
0.1
50
10
5
1
50 200 1 k 2 k
100 500
Load Resistance R
L
(Ω)
SWITCHING TIME vs.
LOAD RESISTANCE
Switching Time t ( s)
µ
t
on
t
off
t
d
t
s
1.2
0.4
0.0
0.8
0.6
0.2
1.0
20 500
5 10 2002 50 100
Frequency f (kHz)
Normalized Gain G
V
FREQUENCY RESPONSE
R
L
= 1 kΩ
510 Ω
300 Ω
100 Ω
1.2
1.0
0.0
0.4
0.2
0.8
0.6
10
2
10
3
110
4
10
5
10
6
Time (Hr)
LONG TERM CTR DEGRADATION
CTR (Relative Value)
I
F
= 1 mA, T
A
= 25°C
I
F
= 5 mA, T
A
= 25°C
I
F
= 20 mA, T
A
= 25°C
I
F
= 20 mA, T
A
= 60°C
I
F
= 5 mA, V
CC
= 5 V,
CTR = 169%
1 000
0.5
100
500
10
1
50
5
0.1
100 1 k 10 k 50 k500 5 k 100 k
t
f
t
s
t
r
t
d
Remark The graphs indicate nominal characteristics.
Data Sheet PN10240EJ03V0DS 7
PS2701-1
TAPING SPECIFICATIONS (in millimeters)
Tape Direction
Outline and Dimensions (Reel)
Packing: 3 500 pcs/reel
2.0±0.5
R 1.0
13.0±0.2
φ
21.0±0.8
φ
330±2.0
φ
100±1.0
φ
2.0±0.5
11.9 to 15.4
Outer edge of
flange
17.5±1.0
13.5±1.0
13.0±0.2
φ
PS2701-1-F3 PS2701-1-F4
1.55±0.1
2.0±0.05
4.0±0.1
1.75±0.1
4.6±0.1
2.9 MAX.
0.3
8.0±0.1
Outline and Dimensions (Tape)
2.4±0.1
1.5
+0.1
–0
7.4±0.1
5.5±0.05
12.0±0.2
Data Sheet PN10240EJ03V0DS
8
PS2701-1
NOTES ON HANDLING
1. Recommended soldering conditions
(1) Infrared reflow soldering
• Peak reflow temperature 260°C or below (package surface temperature)
• Time of peak reflow temperature 10 seconds or less
• Time of temperature higher than 220°C 60 seconds or less
• Time to preheat temperature from 120 to 180°C 120±30 s
• Number of reflows Three
• Flux Rosin flux containing small amount of chlorine (The flux with a
maximum chlorine content of 0.2 Wt% is recommended.)
120±30 s
(preheating)
220°C
180°C
Package Surface Temperature T (°C)
Time (s)
Recommended Temperature Profile of Infrared Reflow
(heating)
to 10 s
to 60 s
260°C MAX.
120°C
(2) Wave soldering
• Temperature 260°C or below (molten solder temperature)
• Time 10 seconds or less
• Preheating conditions 120°C or below (package surface temperature)
• Number of times One (Allowed to be dipped in solder including plastic mold portion.)
• Flux Rosin flux containing small amount of chlorine (The flux with a maximum chlorine
content of 0.2 Wt% is recommended.)
(3) Soldering by soldering iron
• Peak temperature (lead part temperature) 350°C or below
• Time (each pins) 3 seconds or less
• Flux Rosin flux containing small amount of chlorine (The flux with a
maximum chlorine content of 0.2 Wt% is recommended.)
(a) Soldering of leads should be made at the point 1.5 to 2.0 mm from the root of the lead.
(b) Please be sure that the temperature of the package would not be heated over 100°C.
Data Sheet PN10240EJ03V0DS 9
PS2701-1
(4) Cautions
• Fluxes
Avoid removing the residual flux with freon-based and chlorine-based cleaning solvent.
2. Cautions regarding noise
Be aware that when voltage is applied suddenly between the photocoupler’s input and output or between
collector-emitters at startup, the output transistor may enter the on state, even if the voltage is within the absolute
maximum ratings.
3. Measurement conditions of current transfer ratios (CTR), which differ according to
photocoupler
Check the setting values before use, since the forward current conditions at CTR measurement differ according
to product.
When using products other than at the specified forward current, the characteristics curves may differ from the
standard curves due to CTR value variations or the like. This tendency may sometimes be obvious, especially
below IF = 1 mA.
Therefore, check the characteristics under the actual operating conditions and thoroughly take variations or the
like into consideration before use.
USAGE CAUTIONS
1. Protect against static electricity when handling.
2. Avoid storage at a high temperature and high humidity.
Data Sheet PN10240EJ03V0DS
10
PS2701-1
SPECIFICATION OF VDE MARKS LICENSE DOCUMENT
<R>
Parameter Symbol Spec. Unit
Climatic test class (IEC 60068-1/DIN EN 60068-1) 55/110/21
Dielectric strength
maximum operating isolation voltage
Test voltage (partial discharge test, procedure a for type test and random test)
Upr = 1.5 × UIORM, Pd < 5 pC
UIORM
Upr
707
1 060
Vpeak
Vpeak
Test voltage (partial discharge test, procedure b for all devices)
Upr = 1.875 × UIORM, Pd < 5 pC Upr 1 325 Vpeak
Highest permissible overvoltage UTR 6 000 Vpeak
Degree of pollution (DIN EN 60664-1 VDE0110 Part 1) 2
Clearance distance >5.0 mm
Creepage distance >5.0 mm
Comparative tracking index (IEC 60112/DIN EN 60112 (VDE 0303 Part 11)) CTI 175
Material group (DIN EN 60664-1 VDE0110 Part 1) III a
Storage temperature range Tstg –55 to +150 °C
Operating temperature range TA –55 to +110 °C
Isolation resistance, minimum value
VIO = 500 V dc at TA = 25°C
VIO = 500 V dc at TA MAX. at least 100°C
Ris MIN.
Ris MIN.
1012
1011
Ω
Ω
Safety maximum ratings (maximum permissible in case of fault, see thermal
derating curve)
Package temperature
Current (input current IF, Psi = 0)
Power (output or total power dissipation)
Isolation resistance
VIO = 500 V dc at TA = Tsi
Tsi
Isi
Psi
Ris MIN.
150
300
500
109
°C
mA
mW
Ω
Data Sheet PN10240EJ03V0DS 11
PS2701-1
The information in this document is current as of December, 2008. The information is subject to
change without notice. For actual design-in, refer to the latest publications of NEC Electronics data
sheets or data books, etc., for the most up-to-date specifications of NEC Electronics products. Not
all products and/or types are available in every country. Please check with an NEC Electronics sales
representative for availability and additional information.
No part of this document may be copied or reproduced in any form or by any means without the prior
written consent of NEC Electronics. NEC Electronics assumes no responsibility for any errors that may
appear in this document.
NEC Electronics does not assume any liability for infringement of patents, copyrights or other intellectual
property rights of third parties by or arising from the use of NEC Electronics products listed in this document
or any other liability arising from the use of such products. No license, express, implied or otherwise, is
granted under any patents, copyrights or other intellectual property rights of NEC Electronics or others.
Descriptions of circuits, software and other related information in this document are provided for illustrative
purposes in semiconductor product operation and application examples. The incorporation of these
circuits, software and information in the design of a customer's equipment shall be done under the full
responsibility of the customer. NEC Electronics assumes no responsibility for any losses incurred by
customers or third parties arising from the use of these circuits, software and information.
While NEC Electronics endeavors to enhance the quality, reliability and safety of NEC Electronics products,
customers agree and acknowledge that the possibility of defects thereof cannot be eliminated entirely. To
minimize risks of damage to property or injury (including death) to persons arising from defects in NEC
Electronics products, customers must incorporate sufficient safety measures in their design, such as
redundancy, fire-containment and anti-failure features.
NEC Electronics products are classified into the following three quality grades: "Standard", "Special" and
"Specific".
The "Specific" quality grade applies only to NEC Electronics products developed based on a customer-
designated "quality assurance program" for a specific application. The recommended applications of an NEC
Electronics product depend on its quality grade, as indicated below. Customers must check the quality grade of
each NEC Electronics product before using it in a particular application.
The quality grade of NEC Electronics products is "Standard" unless otherwise expressly specified in NEC
Electronics data sheets or data books, etc. If customers wish to use NEC Electronics products in applications
not intended by NEC Electronics, they must contact an NEC Electronics sales representative in advance to
determine NEC Electronics' willingness to support a given application.
(Note)
•
•
•
•
•
•
M8E 02. 11-1
(1)
(2)
"NEC Electronics" as used in this statement means NEC Electronics Corporation and also includes its
majority-owned subsidiaries.
"NEC Electronics products" means any product developed or manufactured by or for NEC Electronics (as
defined above).
Computers, office equipment, communications equipment, test and measurement equipment, audio
and visual equipment, home electronic appliances, machine tools, personal electronic equipment
and industrial robots.
Transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster
systems, anti-crime systems, safety equipment and medical equipment (not specifically designed
for life support).
Aircraft, aerospace equipment, submersible repeaters, nuclear reactor control systems, life
support systems and medical equipment for life support, etc.
"Standard":
"Special":
"Specific":
Data Sheet PN10240EJ03V0DS
12
PS2701-1
Caution GaAs Products This product uses gallium arsenide (GaAs).
GaAs vapor and powder are hazardous to human health if inhaled or ingested, so please observe
the following points.
• Follow related laws and ordinances when disposing of the product. If there are no applicable laws
and/or ordinances, dispose of the product as recommended below.
1. Commission a disposal company able to (with a license to) collect, transport and dispose of
materials that contain arsenic and other such industrial waste materials.
2. Exclude the product from general industrial waste and household garbage, and ensure that the
product is controlled (as industrial waste subject to special control) up until final disposal.
• Do not burn, destroy, cut, crush, or chemically dissolve the product.
• Do not lick the product or in any way allow it to enter the mouth.
