1
www.power-one.com
• Reinforced isolation for IMY-models
• Magnetic feedback
• Synchronous rectifier for 2.5, 3.3 and 5 V
outputs
• Short circuit protection
IMX 15, IMY 15 Series 15 Watt DC-DC Converters
Wide input voltage ranges up to 150 V DC
1 or 2 outputs up to 48 V DC
1500...4000 V DC I/O electric strength test
Selection chart
Output 1 Output 2 Input voltage Type Options
U
o nom
I
o nom
U
o nom
I
o nom
U
i(for availability
[V DC] [mA] [V DC] [mA] [V DC] consult sales point)
2.5 4500 - - 8.4...36 20 IMX 15-2.5-9RG -8, i, L, C, Z
2.5 4500 - - 16.8...75 40 IMX 15-2.5-9RG -8, i, L, C, Z
3.3 4500 - - 8.4...36 20 IMX 15-03-9RG -8, i, L, C, Z
3.3 4500 - - 16.8...75 40 IMX 15-03-9RG -8, i, L, C, Z
3.3 4500 - - 50...150 110 IMY 15-03-9RG -8, i, L, C, Z
5 3500 - - 8.4...36 20 IMX 15-05-9RG -8, i, L, C, Z
5 3500 - - 16.8...75 40 IMX 15-05-9RG -8, i, L, C, Z
5 3500 - - 50...150 110 IMY 15-05-9RG -8, i, L, C, Z
5.1 2300 - - 8.4...36 20 IMX 15-05-9R -8, i, L, C, Z
5.1 2500 - - 16.8...75 40 IMX 15-05-9R -8, i, L, C, Z
5.1 2500 - - 50...150 110 IMY 15-05-9R -8, i, L, C, Z
+5.1 1350 +3.3 1350 8.4...36 20 IMX 15-0503-9R -8, i, L, C, Z
+5.1 1500 +3.3 1500 16.8...75 40 IMX 15-0503-9R -8, i, L, C, Z
+5.1 1500 +3.3 1500 50...150 110 IMY 15-0503-9R -8, i, L, C, Z
5 1300 5 1300 8.4...36 20 IMX 15-05-05-9 -8, R, K, i, L, C, Z
5 1400 5 1400 16.8...75 40 IMX 15-05-05-9 -8, R, K, i, L, C, Z
5 1400 5 1400 50...150 110 IMY 15-05-05-9 -8, R, i, L, C, Z
12 650 12 650 8.4...36 20 IMX 15-12-12-9 -8, R, K, i, L, C, Z
12 700 12 700 16.8...75 40 IMX 15-12-12-9 -8, R, K, i, L, C, Z
12 700 12 700 50...150 110 IMY 15-12-12-9 -8, R, i, L, C, Z
15 500 15 500 8.4...36 20 IMX 15-15-15-9 -8, R, K, i, L, C, Z
15 560 15 560 16.8...75 40 IMX 15-15-15-9 -8, R, K, i, L, C, Z
15 560 15 560 50...150 110 IMY 15-15-15-9 -8, R, i, L, C, Z
24 320 24 320 8.4...36 20 IMX 15-24-24-9 -8, R, i, L, C, Z
24 350 24 350 16.8...75 40 IMX 15-24-24-9 -8, R, i, L, C, Z
24 350 24 350 50...150 110 IMY 15-24-24-9 -8, R, i, L, C, Z
LGA
2
www.power-one.com
Board Mountable IMX 15, IMY 15 Series
Input
Input voltage range 20 IMX 15 8.4...36 V DC
40 IMX 15 16.8...75 V DC
110 IMY 15 50...150 V DC
Output
Output voltage setting accuracy
U
i nom, 50%
l
o nom ±1%
U
o nom
Minimum load recommended for double output models 10%
l
o nom
Line/load regulation
U
i min
...U
i max, 50%
l
o nom, models R (magn. feedback) ±0.5%
U
o nom
Line regulation
U
i min
...U
i max, 50%
l
o nom, models without R ±1%
U
o nom
Load regulation
U
i nom
,
10...100%
l
o nom, models without R, main outp. ±3%
U
o nom
tracking output, models without R ±3%
U
o nom
Output voltage switching noise
U
i nom, 0...100%
l
o nom, peak-peak, total max. 1...2%
U
o nom
Efficiency
U
i nom,
l
o nom up to typ 88%
Control and protection
Remote shut down TTL-compatible input disabled with ≤0.7 V
Trim input for
U
o80...105%
Input undervoltage lock-out
Overload protection
U
i min
...U
i max, fully protected, hiccup mode
No-load protection
U
i min
...U
i max
Temperature protection
Safety and EMC
Electric strength test voltage I/O (20 and 40 IMX/110 IMY) 1500/4000 V DC
Type of insulation I/O (20 and 40 IMX supplementary/110 IMY re-inforced)
Electromagnetic interference conducted (with external filter) class B
radiated class A
Environmental
Operating ambient temperature
U
i nom
, l
o nom –40...71°C
Storage temperature non operational –40...100°C
Relative humidity non condensing 93%
Options
Extended temperature range –40...85°C (derating above 71°C), ambient, operating -8
Magnetic feedback standard for all single output and -0503-models R
Alternative pinout connected outputs, for compatibility K
Inhibit input (reverse logic) TTL-compatible, disabled with ≥2.4 V or open-circuit i
SMD version with PCB lid L
C-pinout connected outputs, no options possible C
Open version no housing, not lacquered Z
3
www.power-one.com
Mechanical data
Tolerances ±0.3 mm (0.012") unless otherwise indicated.
European
Projection
IMX 15, IMY 15 Series 15 Watt DC-DC Converters
50.8 (2")
40.65 (1.6")
10.5 (0.41")
5 (0.19")
0.8 (0.03")
45.72 (1.8")
S09011
1
4
11
17
47 (1.85")
36.83 (1.45")
2.54 (0.1")
Fixing hole for
M2 or KA 22
self tapping screws
5.08 (0.2")
Measuring point of case temperature
T
C
2
3
12
13
15
50.8 (2")
40.65 (1.6")
11.2
(0.44")
3.4 (0.13")
45.72 (1.8")
S90010
1
5
5.08 (0.2")
20.3 (0.8")
Measuring point of case temperature
T
C
2
3
4
0.5 (0.02")
45.72 (1.8")
C pinout (option C)
Standard and option K
4
www.power-one.com
Board Mountable IMX 15, IMY 15 Series
Pin allocation
Pin Standard Option K Option C Option L and Z
single double -0503- dual single dual single double
1 Vi+ Vi+ Vi+ Vi+ Vi+ Vi+ Vi+ Vi+
2Vi–Vi–Vi–Vi–Vi–Vi–Vi–Vi–
3 - Trim n.c. - Vo+ Vo+ n.c. Trim
4 SDSDSDSD - GoSDSD
5----Vo–Vo–n.c. n.c.
6------n.c.n.c.
11 - Vo1+ Vo2+ Vo+ - - - Vo1–
12 - Vo1–Go----Vo2–
13 Vo+ Vo2+ Vo1+ Go - - Vo+ Vo1+
15 Vo–Vo2–Go Vo–--Vo–Vo2–
17 R n.c./R R n.c. - - R n.c.
12
48.26 (1.9")
10.5 (0.41")
5 (0.19")
45.72 (1.8")
S90011
1
4
11
17
? (?")
3 x 5.08 (0.2")
6 x 5.08 (0.2")
2
316
12
13
15
14
Open frame version (option Z)
50.8 (2")
40.65 (1.6")
11.5 (0.45") 54.57 (2.15")
S90012
11
15
5 x 5.08 (0.2")
12
13
16
17
1
4
2
3
6
5
14
6 x 5.08 (0.2")
SMC version (option L)
