TNPW Vishay Dale Thin Film, Rectangular, Resistor Chips FEATURES * Metal film layer on high quality ceramic * Protective top coat * Solder contacts on Ni barrier layer (2010/2512 size = 100% Sn on Ni barrier * Excellent stability at different environmental conditions * Low TC and tight tolerances STANDARD ELECTRICAL SPECIFICATIONS MODEL SIZE POWER RATING P70C (W) CECC INCH METRIC 40401-801 EIA 575 0402 1005 0.063 0.062 LIMITING ELEMENT TEMPERATURE TOLERANCE RESISTANCE VOLTAGE COEFFICIENT RANGE V MAX. 25 ppm/C % 25 0.5 100R-10K 100 0.5 10R-91R 100 0.5 11K-100K TNPW0603 0603 1608 0.1 0.062 75 25 0.1 100R-330K 25 0.5 10R-91R TNPW0805 0805 2012 0.125 0.1 100 15 0.1 100R-252K 25, 50 0.1, 0.5 49R9-252K 25, 50 0.5 10R-49R8 TNPW1206 1206 3216 0.25 0.125 100 15 0.1 100R-1M 25, 50 0.1, 0.5 49R9-1M 50 0.5 22R1-49R8 TNPW1210 1210 3225 0.33* 0.25 100 25, 50 0.1, 0.5 49R9-1M 50 0.5 22R1-49R8 TNPW2010 2010 5025 0.4 150 50 0.5 22R1-49R8 25 0.1 49R9-362K TNPW2512 2512 6332 0.5 200 50 0.5 22R1-49R8 25 0.1 49R9-700K *Size not specified in CECC * Extended values available on request. * Power rating depends on the max. Temperature at the solder point, * Looser tolerance or TC available the component placement density and the substrate material * Marking : 3 digits or 4 digits, 0402 no marking TNPW0402 E-SERIES 24-96 24 24-96 24-96 24-192 24-192 24-192 24-192 24-192 24-96 24-96 24-96 24-96 TECHNICAL SPECIFICATIONS PARAMETER UNIT TNPW0402 Rated Dissipation at 70C (CECC 40401 | EIA 575) W 0.063 0.062 Limiting Element Voltage 2) V Thermal Resistance 1) K/W 870 Category Temperature Range C Failure Rate Weight / 1000pcs 1) 0.1 TNPW0805 0.062 0.125 25 1) Insulation Resistance TNPW0603 75 0.1 TNPW1206 0.25 100 1) 1) 550 0.125 0.33 100 1) 440 TNPW1210 > 10 0.25 140 TNPW2512 0.4 100 1) 220 TNPW2010 0.5 150 1) 200 1) 90 70 9 - 55 / + 125 (+ 155) -1 0.3 *10-9 h 0.65 g Measuring conditions in acc. with CECC 40401 2 2) 5.5 Rated voltage: 10 16 28 39 Px R ORDERING INFORMATION TNPW0805 1002 B T9 RT1 MODEL RESISTANCE VALUE Ex: 1501 = 1.5k 10R0 = 10 3303 = 330k TOLERANCE B = 0.1% C = 0.25% D = 0.5% F = 1.0% TC T1 = 100 ppm/C T2 = 50 ppmC T9 = 25 ppm/C T10 = 15 ppm/C T13 = 10 ppm/C PACKAGING RT1 Papertape 5000 pcs www.vishay.com 60 For Technical Questions, contact: ff2bresistors@vishay.com Document Number 31006 Revision 15-Jul-04 TNPW Vishay Dale Thin Film, Rectangular, Resistor Chips DIMENSIONS SIZE DIMENSIONS millimeters inch metric L W H T1 0.35 0.05 T2 0402 1005 1.00 0.05 0.50 0.05 0.2 0.1 0603 1608 1.6 0.2 0.81 0.2 0.4 0.1 0.3 0.2 0805 2012 2.0 0.2 1.24 0.2 0.4 0. 1 0.4 0.25 1206 3216 3.2 0.15 1.6 0.15 0.61 0.15 0.5 0.25 1210 3225 3.2 0.15 2.49 0.15 0.61 0.15 0.46 0.2 2010 5.0 0.15 2.5 0.15 0.61 0.15 0.6 0.25 2512 6.3 0.20 3.1 0.15 0.61 0.15 0.6 0.25 SOLDER PAD DIMENSIONS millimeters SIZE REFLOW SOLDERING a b l 0402 1005 0.4 0.6 0.5 0603 1608 0.5 0.9 0805 2012 0.7 1.3 0402 0603 0805 1.0 0.9 0.9 1.0 1.2 0.9 1.3 1.3 3216 0.9 1.7 2.0 1.1 1.7 2.3 0.9 2.5 2.0 1.1 2.5 2.3 2010 1.0 2.5 3.9 1.2 2.5 3.9 2512 1.0 3.2 5.2 1.2 3.2 5.2 1206 60 2010 40 30 l 3225 70 50 b 1210 90 80 a 1206 Rated Power In % Temperature Rise In C inch metric WAVE SOLDERING 2512 120 100 EIA 80 60 40 20 20 10 0 CECC 0 0.1 0.2 0.3 0.4 0.5 Power in W Temperature Rise 0 - 55 -25 0 25 Derating 50 75 100 125 150 175 70 Ambient Temperature in C PACKAGING MODEL REEL PACKAGING CODE TAPE WIDTH DIAMETER PIECES / REEL TNPW0402 TNPW0603 8mm Papertape 8mm Paper TNPW0805 TNPW1206 8mm Paper/Blistertape1) TNPW1210 8mm Paper 12mm Blistertape 12mm Blistertape 180mm / 7" 180mm / 7" 292mm / 11.5" 180mm / 7" 180mm / 7" 292mm / 11.5" 180mm / 7" 292mm / 11.5" 180mm/7" 180mm/7" 10000 5000 10000 1000 5000 10000 5000 10000 4000 2000 4000 TNPW2010 TNPW2512 PAPER2) RT7 RT1 RT5 R52 RT1 RT5 RT1 RT5 BLISTER R75 RG1 RT4 R02 R67 R82 1) 2) only in combination with 180mm/7" and 330mm/13" plastic reel plastic reel * further information about packaging: see appropriate catalog or web page Document Number 31006 Revision 15-Jul-04 For Technical Questions, contact: ff2bresistors@vishay.com www.vishay.com 61 TNPW Thin Film Rectangular Chip Resistors Current Noise in V/V Non-Linearity A3 in dB Vishay Dale 120 TNPW1206 TNPW0805 TNPW0603 110 100 TNPW0402 90 80 1K 10K 100K Resistance Value in TNPW0805 TNPW1206 0.1 100 Current Noise 60 TNPW0603 20 10 100 0 [Z]-RO in % RO Phase Angle in 100 -20 1K 10K 100K 1M Resistance Value in 60 TNPW0603 40 20 10 100 1K 0 -20 1K -40 -40 -60 -60 -80 1 HF Performance 5 10 50 100 4.75K 10K 500 1000 Frequency f in MHz 20 10 100 0 -20 50 100 500 1000 Frequency f in MHz 60 TNPW0805 40 20 10 100 1K -40 -60 10K 10 50 100 500 1000 Frequency f in MHz TNPW0805 1K TNPW0603 1 HF Performance 5 10 50 100 500 1000 Frequency f in MHz 3K 1K TNPW0805 TNPW0603 100 100 10 10R 100R 1K Single-Pulse High Voltage Overload Test 1.2 / 50s EN140000 4.27 10K -80 Test Voltage in V 5 3K www.vishay.com 62 10 -20 1K -60 1 HF Performance 5 0 -40 -80 10K 1 HF Performance [Z]-RO in % RO TNPW0805 4.75K -80 60 Phase Angle in TNPW0603 0.01 10 Non-Linearity Test Voltage in V TNPW0402 0.3 0.03 60 40 1 0.5 0.05 70 40 3 2 10K 100K Resistance Value in 10 10R 100R 1K Single-Pulse High Voltage Overload Test 10 / 700s EN140000 4.27 For Technical Questions, contact: ff2bresistors@vishay.com 10K 100K Resistance Value in Document Number 31006 Revision 15-Jul-04 TNPW Vishay Dale 100 Power Rating P in W Power Rating P in W Thin Film, Rectangular, Resistor Chips TNPW0805 10 TNPW0603 1 TNPW0805 10 TNPW0603 1 0.1 0.1 0.01 100 Secondary conditions: a) P 0 (peak pulse, single pulse) b) u 70C c) Umax see diagram (Max pulse voltage) 10-3 0.01 10-2 10-1 1 10 Square Pulse ti in s 10-5 10-4 Pulse Rating P P70 Pulse Voltage Umax in V 10-5 10-4 Pulse Rating P > 0 Secondary conditions: a) P P70 (permissible constant power at u = 70C) b) u 70C c) Umax see diagram (Max. pulse voltage) 10-3 10-2 10-1 1 10 Square Pulse ti in s 500 TNPW0805 300 400 TNPW0603 200 100 0 Secondary conditions: a) P see diagram (Pulse Rating) b) u 70C 10-5 10-4 Maximum Pulse Voltage 10-3 10-2 10-1 1 10 Square Pulse ti in s PERFORMANCE TEST CONDITIONS OF TEST 0402 0.5 TEST RESULTS 0603 TO 2512 TOLERANCES % 0.1 / 0.25 < 100R 100R 0.5, 1.0% Endurance Test at 70C IEC 60115-1 4.25.1 1000 hours at 70C, 1.5 hours "ON", 0.5 hours "OFF" 3% 0.1% 0.05% 0.25% Endurance at UCT IEC 60115-1 4.25.3 1000 hours at 125 C without load 3% 0.1% 0.05% 0.5% Overload Test IEC 60115-1 4.13 Short time overload for 2 seconds 2.5 x rated voltage or 2 x limiting element voltage 2% 0.05% 0.02% 0.1% Thermal Shock IEC 60115-1 4.19, IEC 60068-2-14 Rapid change between upper and lower category temperature 1% 0.05% 0.02% 0.1% Damp Heat Steady State IEC 60115-1 4.24, IEC 60068-2-3 56 days at 40C and 93% relative humidity 3% 0.1% 0.05% 0.5% Resistance to Soldering Heat IEC 60115-1 4.18, IEC 60068-2-20 10 seconds at 260C solder bath temperature 2% 0.05% 0.02% 0.1% APPLICABLE SPECIFICATIONS * CECC40000 / 40400 / 40401-801 * EN140400 / IEC 60115 - 1 * EIA 575 Document Number 31006 Revision 15-Jul-04 For Technical Questions, contact: ff2bresistors@vishay.com www.vishay.com 63