Cree(R) XLamp(R) XP-G2 LEDs XP-G2 Standard LED CLD-DS51 Rev 14A Product family data sheet XP-G2 High Efficacy LED Product Description FEATURES The original XLamp(R) XP-G2 LED pioneered a broad set of LED * applications for the industry, including outdoor and area lighting, Available in white, outdoor white and 80-, 85- and 90-CRI white and has since served as a preferred choice by manufacturers * ANSI-compatible chromaticity bins that require advanced output, efficacy and optical control. The * Binned at 85 C compact and proven 3.45mm XP platform has an excellent * Maximum drive current: Standard: 1500 mA, HE: 2000 mA ecosystem of optics and system solutions available, enabling * Low thermal resistance: Standard: 4 C/W, HE: 3 C/W lighting manufacturers to simplify their design process and * Wide viewing angle: Standard: 120, HE: 125 shorten time to market. * Unlimited floor life at 30 C/85% RH * Reflow solderable - JEDEC JSTD020C XP-G2 LEDs are now available in two different White versions: * Electrically neutral thermal path Standard and High Efficacy (HE). XP-G2 Standard is the same * RoHS and REACh compliant breakthrough product that enabled a broad set of new LED * UL(R) recognized component (E349212) applications for ceramic high-power LEDs. The new High Efficacy version extends this legacy with a dropin upgrade for existing designs optimized around XPG2 LEDs. XPG2 HE LEDs leverage Cree's latest highpower chip technology to deliver 25 percent more light output via a higher maximum current of 2000 mA, higher efficacy and lower thermal www.cree.com/Xlamp resistance. Copyright (c) 2012-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R), the Cree logo and XLamp(R) are registered trademarks of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. Other trademarks, product, and company names are the property of their respective owners and do not imply specific product and/or vendor endorsement, sponsorship or association. Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 XLamp (R) XP-G2 LED Table of Contents Characteristics........................................................................................................................................................................................................ 3 Flux Characteristics - High Efficacy....................................................................................................................................................................... 4 Flux Characteristics - Standard.............................................................................................................................................................................. 8 Relative Spectral Power Distribution................................................................................................................................................................... 15 Relative Flux vs. Junction Temperature............................................................................................................................................................... 15 Electrical Characteristics - High Efficacy............................................................................................................................................................ 16 Electrical Characteristics - Standard................................................................................................................................................................... 16 Relative Flux vs. Current - High Efficacy.............................................................................................................................................................. 17 Relative Flux vs. Current - Standard..................................................................................................................................................................... 17 Relative Chromaticity vs Current and Temperature - High Efficacy................................................................................................................... 18 Relative Chromaticity vs Current and Temperature - Standard.......................................................................................................................... 19 Typical Spatial Distribution - High Efficacy......................................................................................................................................................... 20 Typical Spatial Distribution - Standard................................................................................................................................................................ 20 Thermal Design - High Efficacy............................................................................................................................................................................ 21 Thermal Design - Standard................................................................................................................................................................................... 21 Performance Groups - Luminous Flux............................................................................................................................................................... 22 Performance Groups - Chromaticity................................................................................................................................................................... 23 Cree's Standard Cool White Kits Plotted on ANSI Standard Chromaticity Regions.......................................................................................... 26 Cree's Standard Warm and Neutral White Kits Plotted on ANSI Standard Chromaticity Regions................................................................... 28 Cree's Standard Chromaticity Kits....................................................................................................................................................................... 30 Bin and Order Code Formats................................................................................................................................................................................ 31 Reflow Soldering Characteristics......................................................................................................................................................................... 32 Notes..................................................................................................................................................................................................................... 33 Mechanical Dimensions....................................................................................................................................................................................... 35 Tape and Reel........................................................................................................................................................................................................ 37 Packaging.............................................................................................................................................................................................................. 38 Copyright (c) 2012-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R), the Cree logo and XLamp(R) are registered trademarks of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. Other trademarks, product, and company names are the property of their respective owners and do not imply specific product and/or vendor endorsement, sponsorship or association. 2 XLamp (R) XP-G2 LED Characteristics Characteristics Unit Thermal resistance, junction to solder point - High Efficacy C/W 3 Thermal resistance, junction to solder point - Standard C/W 4 Viewing angle (FWHM) - High Efficacy degrees 125 Viewing angle (FWHM) - Standard degrees 120 Temperature coefficient of voltage - High Efficacy mV/C -1.3 Temperature coefficient of voltage - Standard mV/C -1.8 ESD withstand voltage (HBM per Mil-Std-883D) Minimum Typical Maximum V 8000 DC forward current - High Efficacy mA 2000 DC forward current - Standard mA 1500 Reverse voltage V 5 Forward voltage (@ 350 mA, 85 C) - High Efficacy V 2.73 3 Forward voltage (@ 350 mA, 85 C) - Standard V 2.8 3.15 Forward voltage (@ 700 mA, 85 C) - High Efficacy V 2.83 Forward voltage (@ 700 mA, 85 C) - Standard V 2.9 Forward voltage (@ 1000 mA, 85 C) - High Efficacy V 2.90 Forward voltage (@ 1000 mA, 85 C) - Standard V 3.0 Forward voltage (@ 1500 mA, 85 C) - High Efficacy V 2.99 Forward voltage (@ 1500 mA, 85 C) - Standard V 3.1 LED junction temperature C 150 Copyright (c) 2012-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R), the Cree logo and XLamp(R) are registered trademarks of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. Other trademarks, product, and company names are the property of their respective owners and do not imply specific product and/or vendor endorsement, sponsorship or association. 3 XLamp (R) XP-G2 LED Flux Characteristics - High Efficacy (TJ = 85 C) The following table provides order codes for XLamp HighEfficacy XP-G2 LEDs. For a complete description of the order code nomenclature, please see the Bin and Order Code Formats section (page 31). For definitions of the chromaticity kits, please see the Cree's Standard Chromaticity Kits section (page 30). Chromaticity Kit DT E1 51 DV 50 CCT 7000 K 6500 K 6200 K 6000 K 6000 K Minimum Luminous Flux (lm) @ 350 mA Order Codes Code Flux (lm) @ 85 C Flux (lm) @ 25 C* S4 164 180 XPGBWT-BE-0000-00LDT S3 156 171 XPGBWT-BE-0000-00KDT XPGBWT-HE-0000-00KDT S2 148 163 XPGBWT-BE-0000-00JDT XPGBWT-HE-0000-00JDT R5 139 153 S4 164 180 XPGBWT-BE-0000-00LE1 S3 156 171 XPGBWT-BE-0000-00KE1 XPGBWT-HE-0000-00KE1 S2 148 163 XPGBWT-BE-0000-00JE1 XPGBWT-HE-0000-00JE1 R5 139 153 S4 164 180 XPGBWT-BE-0000-00L51 S3 156 171 XPGBWT-BE-0000-00K51 XPGBWT-HE-0000-00K51 S2 148 163 XPGBWT-BE-0000-00J51 XPGBWT-HE-0000-00J51 R5 139 153 R4 130 143 S4 164 180 XPGBWT-BE-0000-00LDV S3 156 171 XPGBWT-BE-0000-00KDV XPGBWT-HE-0000-00KDV S2 148 163 XPGBWT-BE-0000-00JDV XPGBWT-HE-0000-00JDV R5 139 153 R4 130 143 S4 164 180 XPGBWT-BE-0000-00L50 S3 156 171 XPGBWT-BE-0000-00K50 XPGBWT-HE-0000-00K50 S2 148 163 XPGBWT-BE-0000-00J50 XPGBWT-HE-0000-00J50 R5 139 153 R4 130 143 70 CRI Minimum 80 CRI Minimum 90 CRI Minimum XPGBWT-HE-0000-00HDT XPGBWT-HE-0000-00HE1 XPGBWT-HE-0000-00H51 XPGBWT-UE-0000-00H51 XPGBWT-UE-0000-00G51 XPGBWT-HE-0000-00HDV XPGBWT-UE-0000-00HDV XPGBWT-UE-0000-00GDV XPGBWT-HE-0000-00H50 XPGBWT-UE-0000-00H50 XPGBWT-UE-0000-00G50 Notes * Cree maintains a tolerance of 7% on flux and power measurements, 0.005 on chromaticity (CCx, CCy) measurements and a tolerance of 2 on CRI measurements. See the Measurements section (page 33). * Cree XLamp XP-G2 LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specified by the order code. * Flux values @ 25 C are calculated and for reference only. Copyright (c) 2012-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R), the Cree logo and XLamp(R) are registered trademarks of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. Other trademarks, product, and company names are the property of their respective owners and do not imply specific product and/or vendor endorsement, sponsorship or association. 4 XLamp (R) XP-G2 LED Flux Characteristics - High Efficacy (TJ = 85 C) - Continued Chromaticity Kit E2 E3 F4 E4 F5 CCT 5700 K 5000 K 4750 K 4500 K 4250 K Minimum Luminous Flux (lm) @ 350 mA Order Codes Code Flux (lm) @ 85 C Flux (lm) @ 25 C* 70 CRI Minimum S4 164 180 XPGBWT-BE-0000-00LE2 S3 156 171 XPGBWT-BE-0000-00KE2 XPGBWT-HE-0000-00KE2 S2 148 163 XPGBWT-BE-0000-00JE2 XPGBWT-HE-0000-00JE2 R5 139 153 R4 130 143 S4 164 180 XPGBWT-BE-0000-00LE3 S3 156 171 XPGBWT-BE-0000-00KE3 XPGBWT-HE-0000-00KE3 S2 148 163 XPGBWT-BE-0000-00JE3 XPGBWT-HE-0000-00JE3 R5 139 153 R4 130 143 S4 164 180 XPGBWT-BE-0000-00LF4 S3 156 171 XPGBWT-BE-0000-00KF4 XPGBWT-HE-0000-00KF4 S2 148 163 XPGBWT-BE-0000-00JF4 XPGBWT-HE-0000-00JF4 R5 139 153 R4 130 143 XPGBWT-UE-0000-00GF4 R3 122 134 XPGBWT-UE-0000-00FF4 S4 164 180 XPGBWT-BE-0000-00LE4 S3 156 171 XPGBWT-BE-0000-00KE4 XPGBWT-HE-0000-00KE4 S2 148 163 XPGBWT-BE-0000-00JE4 XPGBWT-HE-0000-00JE4 R5 139 153 R4 130 143 XPGBWT-UE-0000-00GE4 R3 122 134 XPGBWT-UE-0000-00FE4 S4 164 180 XPGBWT-BE-0000-00LF5 S3 156 171 XPGBWT-BE-0000-00KF5 XPGBWT-HE-0000-00KF5 S2 148 163 XPGBWT-BE-0000-00JF5 XPGBWT-HE-0000-00JF5 R5 139 153 R4 130 143 XPGBWT-UE-0000-00GF5 R3 122 134 XPGBWT-UE-0000-00FF5 80 CRI Minimum XPGBWT-HE-0000-00HE2 90 CRI Minimum XPGBWT-UE-0000-00HE2 XPGBWT-UE-0000-00GE2 XPGBWT-HE-0000-00HE3 XPGBWT-UE-0000-00HE3 XPGBWT-UE-0000-00GE3 XPGBWT-HE-0000-00HF4 XPGBWT-HE-0000-00HE4 XPGBWT-HE-0000-00HF5 XPGBWT-UE-0000-00HF4 XPGBWT-UE-0000-00HE4 XPGBWT-UE-0000-00HF5 Notes * Cree maintains a tolerance of 7% on flux and power measurements, 0.005 on chromaticity (CCx, CCy) measurements and a tolerance of 2 on CRI measurements. See the Measurements section (page 33). * Cree XLamp XP-G2 LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specified by the order code. * Flux values @ 25 C are calculated and for reference only. Copyright (c) 2012-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R), the Cree logo and XLamp(R) are registered trademarks of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. Other trademarks, product, and company names are the property of their respective owners and do not imply specific product and/or vendor endorsement, sponsorship or association. 5 XLamp (R) XP-G2 LED Flux Characteristics - High Efficacy (TJ = 85 C) - Continued Chromaticity Kit E5 F6 E6 F7 CCT 4000 K 3750 K 3500 K 3250 K Minimum Luminous Flux (lm) @ 350 mA Order Codes Code Flux (lm) @ 85 C Flux (lm) @ 25 C* 70 CRI Minimum S4 164 180 XPGBWT-BE-0000-00LE5 S3 156 171 XPGBWT-BE-0000-00KE5 XPGBWT-HE-0000-00KE5 S2 148 163 XPGBWT-BE-0000-00JE5 XPGBWT-HE-0000-00JE5 R5 139 153 R4 130 143 XPGBWT-UE-0000-00GE5 R3 122 134 XPGBWT-UE-0000-00FE5 S4 164 180 XPGBWT-BE-0000-00LF6 S3 156 171 XPGBWT-BE-0000-00KF6 S2 148 163 XPGBWT-BE-0000-00JF6 R5 139 153 R4 130 143 XPGBWT-UE-0000-00GF6 R3 122 134 XPGBWT-UE-0000-00FF6 R2 114 125 XPGBWT-UE-0000-00EF6 S4 164 180 XPGBWT-BE-0000-00LE6 S3 156 171 XPGBWT-BE-0000-00KE6 S2 148 163 XPGBWT-BE-0000-00JE6 R5 139 153 R4 130 143 XPGBWT-UE-0000-00GE6 R3 122 134 XPGBWT-UE-0000-00FE6 R2 114 125 XPGBWT-UE-0000-00EE6 S3 156 171 XPGBWT-BE-0000-00KF7 S2 148 163 XPGBWT-BE-0000-00JF7 R5 139 153 XPGBWT-BE-0000-00HF7 R4 130 143 R3 122 134 XPGBWT-UE-0000-00FF7 R2 114 125 XPGBWT-UE-0000-00EF7 80 CRI Minimum XPGBWT-HE-0000-00HE5 90 CRI Minimum XPGBWT-UE-0000-00HE5 XPGBWT-HE-0000-00JF6 XPGBWT-HE-0000-00HF6 XPGBWT-HE-0000-00JE6 XPGBWT-HE-0000-00HE6 XPGBWT-HE-0000-00HF7 XPGBWT-HE-0000-00GF7 XPGBWT-UE-0000-00GF7 Notes * Cree maintains a tolerance of 7% on flux and power measurements, 0.005 on chromaticity (CCx, CCy) measurements and a tolerance of 2 on CRI measurements. See the Measurements section (page 33). * Cree XLamp XP-G2 LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specified by the order code. * Flux values @ 25 C are calculated and for reference only. Copyright (c) 2012-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R), the Cree logo and XLamp(R) are registered trademarks of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. Other trademarks, product, and company names are the property of their respective owners and do not imply specific product and/or vendor endorsement, sponsorship or association. 6 XLamp (R) XP-G2 LED Flux Characteristics - High Efficacy (TJ = 85 C) - Continued Chromaticity Kit E7 F8 E8 CCT 3000 K 2850 K 2700 K Minimum Luminous Flux (lm) @ 350 mA Order Codes Code Flux (lm) @ 85 C Flux (lm) @ 25 C* 70 CRI Minimum S3 156 171 XPGBWT-BE-0000-00KE7 S2 148 163 XPGBWT-BE-0000-00JE7 R5 139 153 XPGBWT-BE-0000-00HE7 R4 130 143 R3 122 134 XPGBWT-UE-0000-00FE7 R2 114 125 XPGBWT-UE-0000-00EE7 S3 156 171 XPGBWT-BE-0000-00KF8 S2 148 163 XPGBWT-BE-0000-00JF8 R5 139 153 XPGBWT-BE-0000-00HF8 R4 130 143 R3 122 134 R2 114 125 XPGBWT-UE-0000-00EF8 Q5 107 118 XPGBWT-UE-0000-00DF8 S3 156 171 XPGBWT-BE-0000-00KE8 S2 148 163 XPGBWT-BE-0000-00JE8 R5 139 153 XPGBWT-BE-0000-00HE8 R4 130 143 R3 122 134 R2 114 125 XPGBWT-UE-0000-00EE8 Q5 107 118 XPGBWT-UE-0000-00DE8 80 CRI Minimum 90 CRI Minimum XPGBWT-HE-0000-00HE7 XPGBWT-HE-0000-00GE7 XPGBWT-UE-0000-00GE7 XPGBWT-HE-0000-00HF8 XPGBWT-HE-0000-00GF8 XPGBWT-HE-0000-00HE8 XPGBWT-HE-0000-00GE8 Notes * Cree maintains a tolerance of 7% on flux and power measurements, 0.005 on chromaticity (CCx, CCy) measurements and a tolerance of 2 on CRI measurements. See the Measurements section (page 33). * Cree XLamp XP-G2 LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specified by the order code. * Flux values @ 25 C are calculated and for reference only. Copyright (c) 2012-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R), the Cree logo and XLamp(R) are registered trademarks of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. Other trademarks, product, and company names are the property of their respective owners and do not imply specific product and/or vendor endorsement, sponsorship or association. 7 XLamp (R) XP-G2 LED Flux Characteristics - Standard (TJ = 85 C) The following table provides order codes for XLamp Standard XP-G2 LEDs. For a complete description of the order code nomenclature, please see the Bin and Order Code Formats section (page 31). For definitions of the chromaticity kits, please see the Cree's Standard Chromaticity Kits section (page 30). Chromaticity Minimum Luminous Flux (lm) @ 350 mA Order Codes Kit Code Flux (lm) @ 85 C 70 CRI Typical 51 53 50 E1 CCT 6200 K 6000 K 6200 K 6500 K Flux (lm) @ 25 C* S4 164 180 XPGBWT-L1-0000-00L51 S3 156 171 XPGBWT-L1-0000-00K51 S2 148 163 XPGBWT-L1-0000-00J51 R5 139 153 XPGBWT-L1-0000-00H51 R4 130 143 XPGBWT-L1-0000-00G51 R3 122 134 XPGBWT-L1-0000-00F51 S4 164 180 XPGBWT-L1-0000-00L53 S3 156 171 XPGBWT-L1-0000-00K53 S2 148 163 XPGBWT-L1-0000-00J53 R5 139 153 XPGBWT-L1-0000-00H53 R4 130 143 XPGBWT-L1-0000-00G53 R3 122 134 XPGBWT-L1-0000-00F53 S4 164 180 XPGBWT-L1-0000-00L50 S3 156 171 XPGBWT-L1-0000-00K50 S2 148 163 XPGBWT-L1-0000-00J50 R5 139 153 XPGBWT-L1-0000-00H50 R4 130 143 XPGBWT-L1-0000-00G50 R3 122 134 XPGBWT-L1-0000-00F50 S4 164 180 XPGBWT-L1-0000-00LE1 S3 156 171 XPGBWT-L1-0000-00KE1 S2 148 163 XPGBWT-L1-0000-00JE1 R5 139 153 XPGBWT-L1-0000-00HE1 R4 130 143 XPGBWT-L1-0000-00GE1 R3 122 134 XPGBWT-L1-0000-00FE1 Notes * Cree maintains a tolerance of 7% on flux and power measurements, 0.005 on chromaticity (CCx, CCy) measurements and a tolerance of 2 on CRI measurements. See the Measurements section (page 33). * Cree XLamp XP-G2 LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specified by the order code. * Flux values @ 25 C are calculated and for reference only. Copyright (c) 2012-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R), the Cree logo and XLamp(R) are registered trademarks of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. Other trademarks, product, and company names are the property of their respective owners and do not imply specific product and/or vendor endorsement, sponsorship or association. 8 XLamp (R) XP-G2 LED Flux Characteristics - Standard (TJ = 85 C) - Continued Chromaticity Minimum Luminous Flux (lm) @ 350 mA Order Codes Kit Code Flux (lm) @ 85 C Flux (lm) @ 25 C* 70 CRI Typical S4 164 180 XPGBWT-L1-0000-00LE2 S3 156 171 XPGBWT-L1-0000-00KE2 S2 148 163 XPGBWT-L1-0000-00JE2 R5 139 153 XPGBWT-L1-0000-00HE2 R4 130 143 XPGBWT-L1-0000-00GE2 R3 122 134 XPGBWT-L1-0000-00FE2 E2 CCT 5700 K Chromaticity Minimum Luminous Flux (lm) @ 350 mA Kit Code Flux (lm) @ 85 C Flux (lm) @25 C* 70 CRI Typical S4 164 180 XPGBWT-01-0000-00LE3 S3 156 171 XPGBWT-01-0000-00KE3 S2 148 163 XPGBWT-01-0000-00JE3 R5 139 153 XPGBWT-01-0000-00HE3 XPGBWT-L1-0000-00HE3 R4 130 143 XPGBWT-01-0000-00GE3 XPGBWT-L1-0000-00GE3 R3 122 134 XPGBWT-01-0000-00FE3 XPGBWT-L1-0000-00FE3 R2 114 125 XPGBWT-01-0000-00EE3 XPGBWT-L1-0000-00EE3 Q5 107 118 S4 164 180 XPGBWT-01-0000-00LF4 S3 156 171 XPGBWT-01-0000-00KF4 S2 148 163 XPGBWT-01-0000-00JF4 R5 139 153 XPGBWT-01-0000-00HF4 XPGBWT-L1-0000-00HF4 R4 130 143 XPGBWT-01-0000-00GF4 XPGBWT-L1-0000-00GF4 R3 122 134 XPGBWT-01-0000-00FF4 XPGBWT-L1-0000-00FF4 R2 114 125 XPGBWT-01-0000-00EF4 XPGBWT-L1-0000-00EF4 Q5 107 118 E3 F4 CCT 5000 K 4750 K Order Codes 75 CRI Typical 80 CRI Minimum XPGBWT-L1-0000-00DE3 XPGBWT-L1-0000-00DF4 Notes * Cree maintains a tolerance of 7% on flux and power measurements, 0.005 on chromaticity (CCx, CCy) measurements and a tolerance of 2 on CRI measurements. See the Measurements section (page 33). * Cree XLamp XP-G2 LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specified by the order code. * Flux values @ 25 C are calculated and for reference only. Copyright (c) 2012-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R), the Cree logo and XLamp(R) are registered trademarks of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. Other trademarks, product, and company names are the property of their respective owners and do not imply specific product and/or vendor endorsement, sponsorship or association. 9 XLamp (R) XP-G2 LED Flux Characteristics - Standard (TJ = 85 C) - Continued Chromaticity Minimum Luminous Flux (lm) @ 350 mA Kit Code Flux (lm) @ 85 C Flux (lm) @25 C* 70 CRI Typical S4 164 180 XPGBWT-01-0000-00LE4 S3 156 171 XPGBWT-01-0000-00KE4 S2 148 163 XPGBWT-01-0000-00JE4 R5 139 153 XPGBWT-01-0000-00HE4 XPGBWT-L1-0000-00HE4 R4 130 143 XPGBWT-01-0000-00GE4 XPGBWT-L1-0000-00GE4 R3 122 134 XPGBWT-01-0000-00FE4 XPGBWT-L1-0000-00FE4 R2 114 125 XPGBWT-01-0000-00EE4 XPGBWT-L1-0000-00EE4 Q5 107 118 S4 164 180 XPGBWT-01-0000-00LF5 S3 156 171 XPGBWT-01-0000-00KF5 S2 148 163 XPGBWT-01-0000-00JF5 R5 139 153 XPGBWT-01-0000-00HF5 XPGBWT-L1-0000-00HF5 R4 130 143 XPGBWT-01-0000-00GF5 XPGBWT-L1-0000-00GF5 R3 122 134 XPGBWT-01-0000-00FF5 XPGBWT-L1-0000-00FF5 R2 114 125 XPGBWT-01-0000-00EF5 XPGBWT-L1-0000-00EF5 Q5 107 118 S4 164 180 XPGBWT-01-0000-00LE5 S3 156 171 XPGBWT-01-0000-00KE5 S2 148 163 XPGBWT-01-0000-00JE5 R5 139 153 XPGBWT-01-0000-00HE5 XPGBWT-L1-0000-00HE5 XPGBWT-H1-0000-00HE5 R4 130 143 XPGBWT-01-0000-00GE5 XPGBWT-L1-0000-00GE5 XPGBWT-H1-0000-00GE5 R3 122 134 XPGBWT-01-0000-00FE5 XPGBWT-L1-0000-00FE5 XPGBWT-H1-0000-00FE5 R2 114 125 XPGBWT-01-0000-00EE5 XPGBWT-L1-0000-00EE5 XPGBWT-H1-0000-00EE5 Q5 107 118 XPGBWT-L1-0000-00DE5 XPGBWT-H1-0000-00DE5 R5 139 153 XPGBWT-L1-0000-00HZ5 XPGBWT-H1-0000-00HZ5 R4 130 143 XPGBWT-L1-0000-00GZ5 XPGBWT-H1-0000-00GZ5 R3 122 134 XPGBWT-L1-0000-00FZ5 XPGBWT-H1-0000-00FZ5 R2 114 125 XPGBWT-L1-0000-00EZ5 XPGBWT-H1-0000-00EZ5 Q5 107 118 XPGBWT-L1-0000-00DZ5 XPGBWT-H1-0000-00DZ5 E4 F5 E5 Z5 CCT 4500 K 4250 K 4000 K 4000 K Order Codes 75 CRI Typical 80 CRI Minimum XPGBWT-L1-0000-00DE4 XPGBWT-L1-0000-00DF5 Notes * Cree maintains a tolerance of 7% on flux and power measurements, 0.005 on chromaticity (CCx, CCy) measurements and a tolerance of 2 on CRI measurements. See the Measurements section (page 33). * Cree XLamp XP-G2 LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specified by the order code. * Flux values @ 25 C are calculated and for reference only. Copyright (c) 2012-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R), the Cree logo and XLamp(R) are registered trademarks of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. Other trademarks, product, and company names are the property of their respective owners and do not imply specific product and/or vendor endorsement, sponsorship or association. 10 XLamp (R) XP-G2 LED Flux Characteristics - Standard (TJ = 85 C) - Continued Chromaticity Minimum Luminous Flux (lm) @ 350 mA Kit Code Flux (lm) @ 85 C Flux (lm) @25 C* 70 CRI Typical S2 148 163 XPGBWT-01-000000JF6 R5 139 153 R4 130 R3 F6 E6 Z6 CCT Order Codes 80 CRI Typical 80 CRI Minimum XPGBWT-01-000000HF6 XPGBWT-L1-000000HF6 XPGBWT-H1-000000HF6 143 XPGBWT-01-000000GF6 XPGBWT-L1-000000GF6 XPGBWT-H1-000000GF6 122 134 XPGBWT-01-000000FF6 XPGBWT-L1-000000FF6 XPGBWT-H1-000000FF6 R2 114 125 XPGBWT-01-000000EF6 XPGBWT-L1-000000EF6 XPGBWT-H1-000000EF6 Q5 107 118 XPGBWT-01-000000DF6 XPGBWT-L1-000000DF6 XPGBWT-H1-000000DF6 S2 148 163 XPGBWT-01-000000JE6 R5 139 153 XPGBWT-01-000000HE6 XPGBWT-L1-000000HE6 XPGBWT-H1-000000HE6 R4 130 143 XPGBWT-01-000000GE6 XPGBWT-L1-000000GE6 XPGBWT-H1-000000GE6 R3 122 134 XPGBWT-01-000000FE6 XPGBWT-L1-000000FE6 XPGBWT-H1-000000FE6 R2 114 125 XPGBWT-01-000000EE6 XPGBWT-L1-000000EE6 XPGBWT-H1-000000EE6 Q5 107 118 XPGBWT-01-000000DE6 XPGBWT-L1-000000DE6 XPGBWT-H1-000000DE6 R4 130 143 XPGBWT-L1-000000GZ6 XPGBWT-H1-000000GZ6 R3 122 134 XPGBWT-L1-000000FZ6 XPGBWT-H1-000000FZ6 R2 114 125 XPGBWT-L1-000000EZ6 XPGBWT-H1-000000EZ6 Q5 107 118 XPGBWT-L1-000000DZ6 XPGBWT-H1-000000DZ6 3750 K 3500 K 3500 K 85 CRI Minimum 90 CRI Minimum Notes * Cree maintains a tolerance of 7% on flux and power measurements, 0.005 on chromaticity (CCx, CCy) measurements and a tolerance of 2 on CRI measurements. See the Measurements section (page 33). * Cree XLamp XP-G2 LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specified by the order code. * Flux values @ 25 C are calculated and for reference only. Copyright (c) 2012-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R), the Cree logo and XLamp(R) are registered trademarks of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. Other trademarks, product, and company names are the property of their respective owners and do not imply specific product and/or vendor endorsement, sponsorship or association. 11 XLamp (R) XP-G2 LED Flux Characteristics - Standard (TJ = 85 C) - Continued Chromaticity Minimum Luminous Flux (lm) @ 350 mA Kit Code Flux (lm) @ 85 C Flux (lm) @25 C* 70 CRI Typical S2 148 163 XPGBWT-01-000000JF7 R5 139 153 R4 130 R3 F7 E7 CCT 80 CRI Typical 80 CRI Minimum 85 CRI Minimum 90 CRI Minimum XPGBWT-01-000000HF7 XPGBWT-L1-000000HF7 XPGBWT-H1-000000HF7 143 XPGBWT-01-000000GF7 XPGBWT-L1-000000GF7 XPGBWT-H1-000000GF7 122 134 XPGBWT-01-000000FF7 XPGBWT-L1-000000FF7 XPGBWT-H1-000000FF7 R2 114 125 XPGBWT-01-000000EF7 XPGBWT-L1-000000EF7 XPGBWT-H1-000000EF7 Q5 107 118 XPGBWT-L1-000000DF7 XPGBWT-H1-000000DF7 S2 148 163 XPGBWT-01-000000JE7 R5 139 153 XPGBWT-01-000000HE7 XPGBWT-L1-000000HE7 XPGBWT-H1-000000HE7 R4 130 143 XPGBWT-01-000000GE7 XPGBWT-L1-000000GE7 XPGBWT-H1-000000GE7 R3 122 134 XPGBWT-01-000000FE7 XPGBWT-L1-000000FE7 XPGBWT-H1-000000FE7 R2 114 125 XPGBWT-01-000000EE7 XPGBWT-L1-000000EE7 XPGBWT-H1-000000EE7 XPGBWT-P1-000000EE7 XPGBWT-U1-000000EE7 Q5 107 118 XPGBWT-L1-000000DE7 XPGBWT-H1-000000DE7 XPGBWT-P1-000000DE7 XPGBWT-U1-000000DE7 Q4 100 110 XPGBWT-L1-000000CE7 XPGBWT-H1-000000CE7 XPGBWT-P1-000000CE7 XPGBWT-U1-000000CE7 Q3 93.9 103 XPGBWT-P1-000000BE7 XPGBWT-U1-000000BE7 Q2 87.4 96.1 XPGBWT-P1-000000AE7 XPGBWT-U1-000000AE7 P4 80.6 88.6 XPGBWT-P1-0000009E7 XPGBWT-U1-0000009E7 P3 73.9 81.2 XPGBWT-P1-0000008E7 XPGBWT-U1-0000008E7 3250 K 3000 K Order Codes Notes * Cree maintains a tolerance of 7% on flux and power measurements, 0.005 on chromaticity (CCx, CCy) measurements and a tolerance of 2 on CRI measurements. See the Measurements section (page 33). * Cree XLamp XP-G2 LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specified by the order code. * Flux values @ 25 C are calculated and for reference only. Copyright (c) 2012-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R), the Cree logo and XLamp(R) are registered trademarks of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. Other trademarks, product, and company names are the property of their respective owners and do not imply specific product and/or vendor endorsement, sponsorship or association. 12 XLamp (R) XP-G2 LED Flux Characteristics - Standard (TJ = 85 C) - Continued Chromaticity Minimum Luminous Flux (lm) @ 350 mA Kit Code Flux (lm) @ 85 C Flux (lm) @25 C* R4 130 R3 Z7 F8 CCT 3000 K Order Codes 80 CRI Typical 80 CRI Minimum 85 CRI Minimum 90 CRI Minimum 143 XPGBWT-L1-000000GZ7 XPGBWT-H1-000000GZ7 122 134 XPGBWT-L1-000000FZ7 XPGBWT-H1-000000FZ7 R2 114 125 XPGBWT-L1-000000EZ7 XPGBWT-H1-000000EZ7 Q5 107 118 XPGBWT-L1-000000DZ7 XPGBWT-H1-000000DZ7 XPGBWT-P1-000000DZ7 XPGBWT-U1-000000DZ7 Q4 100 110 XPGBWT-L1-000000CZ7 XPGBWT-H1-000000CZ7 XPGBWT-P1-000000CZ7 XPGBWT-U1-000000CZ7 Q3 93.9 103 XPGBWT-P1-000000BZ7 XPGBWT-U1-000000BZ7 Q2 87.4 96.1 XPGBWT-P1-000000AZ7 XPGBWT-U1-000000AZ7 P4 80.6 88.6 XPGBWT-P1-0000009Z7 XPGBWT-U1-0000009Z7 P3 73.9 81.2 XPGBWT-P1-0000008Z7 XPGBWT-U1-0000008Z7 R4 130 143 XPGBWT-L1-000000GF8 XPGBWT-H1-000000GF8 R3 122 134 XPGBWT-L1-000000FF8 XPGBWT-H1-000000FF8 R2 114 125 XPGBWT-L1-000000EF8 XPGBWT-H1-000000EF8 Q5 107 118 XPGBWT-L1-000000DF8 XPGBWT-H1-000000DF8 XPGBWT-P1-000000DF8 XPGBWT-U1-000000DF8 Q4 100 110 XPGBWT-L1-000000CF8 XPGBWT-H1-000000CF8 XPGBWT-P1-000000CF8 XPGBWT-U1-000000CF8 Q3 93.9 103 XPGBWT-L1-000000BF8 XPGBWT-H1-000000BF8 XPGBWT-P1-000000BF8 XPGBWT-U1-000000BF8 Q2 87.4 96.1 XPGBWT-P1-000000AF8 XPGBWT-U1-000000AF8 P4 80.6 88.6 XPGBWT-P1-0000009F8 XPGBWT-U1-0000009F8 P3 73.9 81.2 XPGBWT-P1-0000008F8 XPGBWT-U1-0000008F8 P2 67.2 73.9 XPGBWT-P1-0000007F8 XPGBWT-U1-0000007F8 2850 K 70 CRI Typical Notes * Cree maintains a tolerance of 7% on flux and power measurements, 0.005 on chromaticity (CCx, CCy) measurements and a tolerance of 2 on CRI measurements. See the Measurements section (page 33). * Cree XLamp XP-G2 LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specified by the order code. * Flux values @ 25 C are calculated and for reference only. Copyright (c) 2012-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R), the Cree logo and XLamp(R) are registered trademarks of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. Other trademarks, product, and company names are the property of their respective owners and do not imply specific product and/or vendor endorsement, sponsorship or association. 13 XLamp (R) XP-G2 LED Flux Characteristics - Standard (TJ = 85 C) - Continued Chromaticity Minimum Luminous Flux (lm) @ 350 mA Kit Code Flux (lm) @ 85 C Flux (lm) @25 C* R4 130 R3 E8 Z8 CCT 80 CRI Typical 80 CRI Minimum 85 CRI Minimum 90 CRI Minimum 143 XPGBWT-L1-000000GE8 XPGBWT-H1-000000GE8 122 134 XPGBWT-L1-000000FE8 XPGBWT-H1-000000FE8 R2 114 125 XPGBWT-L1-000000EE8 XPGBWT-H1-000000EE8 Q5 107 118 XPGBWT-L1-000000DE8 XPGBWT-H1-000000DE8 Q4 100 110 XPGBWT-L1-000000CE8 XPGBWT-H1-000000CE8 XPGBWT-P1-000000CE8 XPGBWT-U1-000000CE8 Q3 93.9 103 XPGBWT-L1-000000BE8 XPGBWT-H1-000000BE8 XPGBWT-P1-000000BE8 XPGBWT-U1-000000BE8 Q2 87.4 96.1 XPGBWT-P1-000000AE8 XPGBWT-U1-000000AE8 P4 80.6 88.6 XPGBWT-P1-0000009E8 XPGBWT-U1-0000009E8 P3 73.9 81.2 XPGBWT-P1-0000008E8 XPGBWT-U1-0000008E8 P2 67.2 73.9 XPGBWT-P1-0000007E8 XPGBWT-U1-0000007E8 R3 122 134 XPGBWT-L1-000000FZ8 XPGBWT-H1-000000FZ8 R2 114 125 XPGBWT-L1-000000EZ8 XPGBWT-H1-000000EZ8 Q5 107 118 XPGBWT-L1-000000DZ8 XPGBWT-H1-000000DZ8 Q4 100 110 XPGBWT-L1-000000CZ8 XPGBWT-H1-000000CZ8 Q3 93.9 103 XPGBWT-L1-000000BZ8 XPGBWT-H1-000000BZ8 XPGBWT-P1-000000BZ8 XPGBWT-U1-000000BZ8 Q2 87.4 96.1 XPGBWT-P1-000000AZ8 XPGBWT-U1-000000AZ8 P4 80.6 88.6 XPGBWT-P1-0000009Z8 XPGBWT-U1-0000009Z8 P3 73.9 81.2 XPGBWT-P1-0000008Z8 XPGBWT-U1-0000008Z8 P2 67.2 73.9 XPGBWT-P1-0000007Z8 XPGBWT-U1-0000007Z8 2700 K 2700 K Order Codes 70 CRI Typical Notes * Cree maintains a tolerance of 7% on flux and power measurements, 0.005 on chromaticity (CCx, CCy) measurements and a tolerance of 2 on CRI measurements. See the Measurements section (page 33). * Cree XLamp XP-G2 LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specified by the order code. * Flux values @ 25 C are calculated and for reference only. Copyright (c) 2012-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R), the Cree logo and XLamp(R) are registered trademarks of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. Other trademarks, product, and company names are the property of their respective owners and do not imply specific product and/or vendor endorsement, sponsorship or association. 14 XLamp (R) XP-G2 LED Relative Spectral Power Relative Spectral Power Distribution 100% Relative Radiant Power 80% 60% 5000 K - 8300 K CCT 3700 K - 5000 K CCT 40% 2600 K - 3700 K CCT 20% 0% 380 430 480 530 580 630 680 730 780 Wavelength (nm) Relative Flux Output vs. Junction Temperature Relative Flux vs. Junction Temperature (IF = 350 mA) 120% Relative Luminous Flux 100% 80% 60% 40% 20% 0% 25 50 75 100 125 150 Junction Temperature (C) Copyright (c) 2012-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R), the Cree logo and XLamp(R) are registered trademarks of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. Other trademarks, product, and company names are the property of their respective owners and do not imply specific product and/or vendor endorsement, sponsorship or association. 15 XLamp (R) XP-G2 LED Electrical Characteristics (Tj = 85C) - high efficacy Electrical Characteristics - High Efficacy (TJ = 85 C) 2000 Forward Current (mA) 1750 1500 1250 1000 750 500 250 0 2.60 2.70 2.80 2.90 3.00 3.10 3.20 3.00 3.10 3.20 Forward Voltage (V) Electrical Characteristics (Tj = 85C) - standard efficacy Electrical Characteristics - Standard (TJ = 85 C) 1500 Forward Current (mA) 1250 1000 750 500 250 0 2.60 2.70 2.80 2.90 Forward Voltage (V) Copyright (c) 2012-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R), the Cree logo and XLamp(R) are registered trademarks of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. Other trademarks, product, and company names are the property of their respective owners and do not imply specific product and/or vendor endorsement, sponsorship or association. 16 XLamp (R) XP-G2 LED Relative Intensity vs. Current (Tj = 85C) - high efficacy Relative Flux vs. Current - High Efficacy (TJ = 85 C) 450% Relative Luminous Flux 400% 350% 300% 250% 200% 150% 100% 50% 0% 0 250 500 750 1000 1250 1500 1750 2000 Forward Current (mA) Relative Intensity vs. Current (Tj = 85C) - standard Relative Flux vs. Current - Standard (TJ = 85 C) 350% Relative Luminous Flux 300% 250% 200% 150% 100% 50% 0% 0 250 500 750 1000 1250 1500 Forward Current (mA) Copyright (c) 2012-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R), the Cree logo and XLamp(R) are registered trademarks of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. Other trademarks, product, and company names are the property of their respective owners and do not imply specific product and/or vendor endorsement, sponsorship or association. 17 XLamp (R) XP-G2 LED Delta CCT vs. Current vs - high efficacyand - warm white Relative Chromaticity Current Temperature - High Efficacy (Warm White*) 0.020 TJ = 85 C 0.015 0.010 0.005 CCx 0.000 CCy -0.005 -0.010 -0.015 -0.020 0 250 500 750 1000 1250 1500 1750 2000 Current (mA) Delta CCT vs Temp - high efficacy - warm white 0.020 IF = 350 mA 0.015 0.010 0.005 CCx 0.000 CCy -0.005 -0.010 -0.015 -0.020 25 50 75 100 125 150 Tsp (C) * Warm White XLamp XP-G2 LEDs have a typical CRI of 80. Copyright (c) 2012-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R), the Cree logo and XLamp(R) are registered trademarks of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. Other trademarks, product, and company names are the property of their respective owners and do not imply specific product and/or vendor endorsement, sponsorship or association. 18 XLamp (R) XP-G2 LED Delta CCT vs. Current - standard - warm white Relative Chromaticity vs Current and Temperature - Standard (Warm White*) 0.020 TJ = 85 C 0.015 0.010 0.005 CCx 0.000 CCy -0.005 -0.010 -0.015 -0.020 0 250 500 750 1000 1250 1500 Delta CCT vs Temp - standard - warm white Current (mA) 0.020 IF = 350 mA 0.015 0.010 0.005 CCx 0.000 CCy -0.005 -0.010 -0.015 -0.020 25 50 75 100 125 150 Tsp (C) * Warm White XLamp XP-G2 LEDs have a typical CRI of 80. Copyright (c) 2012-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R), the Cree logo and XLamp(R) are registered trademarks of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. Other trademarks, product, and company names are the property of their respective owners and do not imply specific product and/or vendor endorsement, sponsorship or association. 19 XLamp (R) XP-G2 LED Typical Spatial Radiation Pattern - high efficacy Typical Spatial Distribution - High Efficacy 100% Relative Luminous Intensity 80% 60% 40% 20% -100 -80 -60 -40 -20 0% 0 20 40 60 80 100 60 80 100 Angle () Typical Spatial Radiation Pattern - standard efficacy Typical Spatial Distribution - Standard 100% Relative Luminous Intensity 80% 60% 40% 20% -100 -80 -60 -40 -20 0% 0 20 40 Angle () Copyright (c) 2012-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R), the Cree logo and XLamp(R) are registered trademarks of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. Other trademarks, product, and company names are the property of their respective owners and do not imply specific product and/or vendor endorsement, sponsorship or association. 20 XLamp (R) XP-G2 LED Thermal Design - high efficacy Thermal Design - High Efficacy The maximum forward current is determined by the thermal resistance between the LED junction and ambient. It is crucial for the end product to be designed in a manner that minimizes the thermal resistance from the solder point to ambient in order to optimize lamp life and optical characteristics. 2200 2000 Maximum Current (mA) 1800 1600 1400 1200 1000 800 Rj-a = 10C/W 600 Rj-a = 15C/W 400 Rj-a = 20C/W 200 0 Rj-a = 25C/W 0 20 40 60 80 100 120 140 160 60 80 100 120 140 160 Temperature (C) Thermal Design - standard Ambient efficacy Cool White Thermal Design - Standard 1600 Maximum Current (mA) 1400 1200 1000 800 600 Rj-a = 10C/W 400 Rj-a = 15C/W Rj-a = 20C/W 200 0 Rj-a = 25C/W 0 20 40 Ambient Temperature (C) Copyright (c) 2012-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R), the Cree logo and XLamp(R) are registered trademarks of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. Other trademarks, product, and company names are the property of their respective owners and do not imply specific product and/or vendor endorsement, sponsorship or association. 21 XLamp (R) XP-G2 LED Performance Groups - Luminous Flux XLamp XP-G2 LEDs are tested for luminous flux and placed into one of the following luminousflux groups: Group Code Minimum Luminous Flux (lm) @ 350 mA Maximum Luminous Flux (lm) @ 350 mA P2 67.2 73.9 P3 73.9 80.6 P4 80.6 87.4 Q2 87.4 93.9 Q3 93.9 100 Q4 100 107 Q5 107 114 R2 114 122 R3 122 130 R4 130 139 R5 139 148 S2 148 156 S3 156 164 S4 164 172 S5 172 180 Copyright (c) 2012-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R), the Cree logo and XLamp(R) are registered trademarks of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. Other trademarks, product, and company names are the property of their respective owners and do not imply specific product and/or vendor endorsement, sponsorship or association. 22 XLamp (R) XP-G2 LED Performance Groups - Chromaticity Region 0A 0R 1A 1R 2A 2R 3A 3R 4A x y 0.2950 0.2970 0.2920 0.3060 0.2984 0.3133 0.3009 Region x y 0.2920 0.3060 x y 0.2984 0.3133 x y 0.2984 0.3133 0.2895 0.3135 0.2962 0.3220 0.3048 0.3207 0.2962 0.3220 0.3028 0.3304 0.3068 0.3113 0.3042 0.2984 0.3133 0.3048 0.3207 0.3009 0.3042 0.2980 0.2880 0.2895 0.3135 0.2962 0.3220 0.3037 0.2937 0.2950 0.2970 0.2870 0.3210 0.2937 0.3312 0.3009 0.3042 0.3009 0.3042 0.2937 0.3312 0.3005 0.3415 0.3068 0.3113 0.3037 0.2937 0.2962 0.3220 0.3028 0.3304 0.3093 0.2993 0.3048 0.3207 0.3028 0.3304 0.3115 0.3391 0.3130 0.3290 0.3130 0.3290 0.3115 0.3391 0.3205 0.3481 0.3213 0.3373 0.3144 0.3186 0.3130 0.3290 0.3213 0.3373 0.3221 0.3261 0.3068 0.3113 0.3048 0.3207 0.3130 0.3290 0.3144 0.3186 0.3068 0.3113 0.3005 0.3415 0.3099 0.3509 0.3144 0.3186 0.3144 0.3186 0.3099 0.3509 0.3196 0.3602 0.3221 0.3261 0.3161 0.3059 0.3115 0.3391 0.3205 0.3481 0.3231 0.3120 0.3093 0.2993 0.3028 0.3304 0.3115 0.3391 0.3161 0.3059 0.3215 0.3350 0.3207 0.3462 0.3290 0.3538 0.3290 0.3417 0.3290 0.3417 0.3290 0.3538 0.3376 0.3616 0.3371 0.3490 0.3290 0.3300 0.3290 0.3417 0.3371 0.3490 0.3366 0.3369 0.3222 0.3243 0.3215 0.3350 0.3290 0.3417 0.3290 0.3300 0.3222 0.3243 0.3196 0.3602 0.3290 0.3690 0.3290 0.3300 0.3290 0.3300 0.3290 0.3690 0.3381 0.3762 0.3366 0.3369 0.3290 0.3180 0.3290 0.3538 0.3376 0.3616 0.3361 0.3245 0.3231 0.3120 0.3207 0.3462 0.3290 0.3538 0.3290 0.3180 0.3371 0.3490 0.3376 0.3616 0.3463 0.3687 0.3451 0.3554 0.3451 0.3554 0.3463 0.3687 0.3551 0.3760 0.3533 0.3620 0.3440 0.3427 0.3451 0.3554 0.3533 0.3620 0.3515 0.3487 0.3366 0.3369 0.3371 0.3490 0.3451 0.3554 0.3440 0.3427 0.3366 0.3369 0.3381 0.3762 0.3440 0.3428 0.3480 0.3840 0.3429 0.3307 0.3463 0.3687 0.3361 0.3245 0.3376 0.3616 0.3530 0.3597 0.3548 0.3736 0.3641 0.3804 0.3615 0.3659 0.3615 0.3659 0.3641 0.3804 0.3736 0.3874 0.3702 0.3722 0.3590 0.3521 0.3615 0.3659 0.3702 0.3722 0.3670 0.3578 0.3512 0.3465 0.3530 0.3597 0.3615 0.3659 0.3590 0.3521 0B 0S 1B 1S 2B 2S 3B 3S 4B Region 0C 0T 1C 1T 2C 2T 3C 4C Region 0D 0U 1D 1U 2D 2U 3D 4D Copyright (c) 2012-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R), the Cree logo and XLamp(R) are registered trademarks of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. Other trademarks, product, and company names are the property of their respective owners and do not imply specific product and/or vendor endorsement, sponsorship or association. 23 XLamp (R) XP-G2 LED Performance Groups - Chromaticity (continued) Region 5A1 5B1 5C1 5D1 6A1 6B1 6C1 6D1 7A1 x y 0.3670 0.3578 0.3686 0.3649 0.3744 0.3685 0.3726 Region x y 0.3686 0.3649 x y x y 0.3744 0.3685 0.3726 0.3612 0.3702 0.3722 0.3763 0.3760 0.3744 0.3685 0.3763 0.3760 0.3825 0.3798 0.3804 0.3721 0.3612 0.3744 0.3685 0.3804 0.3721 0.3783 0.3646 0.3702 0.3722 0.3719 0.3797 0.3782 0.3837 0.3763 0.3760 0.3719 0.3797 0.3736 0.3874 0.3802 0.3916 0.3782 0.3837 0.3782 0.3837 0.3802 0.3916 0.3869 0.3958 0.3847 0.3877 0.3763 0.3760 0.3782 0.3837 0.3847 0.3877 0.3825 0.3798 0.3825 0.3798 0.3847 0.3877 0.3912 0.3917 0.3887 0.3836 0.3847 0.3877 0.3912 0.3917 0.3869 0.3958 0.3937 0.4001 0.3912 0.3917 0.3937 0.4001 0.4006 0.4044 0.3978 0.3958 0.3887 0.3836 0.3912 0.3917 0.3978 0.3958 0.3950 0.3875 0.3783 0.3646 0.3804 0.3721 0.3863 0.3758 0.3840 0.3681 0.3804 0.3721 0.3825 0.3798 0.3887 0.3836 0.3863 0.3758 0.3863 0.3758 0.3887 0.3836 0.3950 0.3875 0.3924 0.3794 0.3840 0.3681 0.3863 0.3758 0.3924 0.3794 0.3898 0.3716 0.3889 0.3690 0.3915 0.3768 0.3981 0.3800 0.3953 0.3720 0.3915 0.3768 0.3941 0.3848 0.4010 0.3882 0.3981 0.3800 0.3981 0.3800 0.4010 0.3882 0.4080 0.3916 0.4048 0.3832 0.3953 0.3720 0.3981 0.3800 0.4048 0.3832 0.4017 0.3751 0.3941 0.3848 0.3968 0.3930 0.4040 0.3966 0.4010 0.3882 0.3968 0.3930 0.3996 0.4015 0.4071 0.4052 0.4040 0.3966 0.4040 0.3966 0.4071 0.4052 0.4146 0.4089 0.4113 0.4001 0.4010 0.3882 0.4040 0.3966 0.4113 0.4001 0.4080 0.3916 0.4080 0.3916 0.4113 0.4001 0.4186 0.4037 0.4150 0.3950 0.4113 0.4001 0.4146 0.4089 0.4222 0.4127 0.4186 0.4037 0.4186 0.4037 0.4222 0.4127 0.4299 0.4165 0.4259 0.4073 0.4150 0.3950 0.4186 0.4037 0.4259 0.4073 0.4221 0.3984 0.4017 0.3751 0.4048 0.3832 0.4116 0.3865 0.4082 0.3782 0.4048 0.3832 0.4080 0.3916 0.4150 0.3950 0.4116 0.3865 0.4116 0.3865 0.4150 0.3950 0.4221 0.3984 0.4183 0.3898 0.4082 0.3782 0.4116 0.3865 0.4183 0.3898 0.4147 0.3814 0.4147 0.3814 0.4183 0.3898 0.4242 0.3919 0.4203 0.3833 0.4183 0.3898 0.4221 0.3984 0.4281 0.4006 0.4242 0.3919 0.4242 0.3919 0.4281 0.4006 0.4342 0.4028 0.4300 0.3939 0.4203 0.3833 0.4242 0.3919 0.4300 0.3939 0.4259 0.3853 5A2 5B2 5C2 5D2 6A2 6B2 6C2 6D2 7A2 Region 5A3 5B3 5C3 5D3 6A3 6B3 6C3 6D3 7A3 Region 5A4 5B4 5C4 5D4 6A4 6B4 6C4 6D4 7A4 Copyright (c) 2012-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R), the Cree logo and XLamp(R) are registered trademarks of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. Other trademarks, product, and company names are the property of their respective owners and do not imply specific product and/or vendor endorsement, sponsorship or association. 24 XLamp (R) XP-G2 LED Performance Groups - Chromaticity (continued) Region 7B1 7C1 7D1 8A1 8B1 8C1 8D1 x y 0.4221 0.3984 0.4259 0.4073 0.4322 0.4096 0.4281 Region x y 0.4259 0.4073 x y x y 0.4322 0.4096 0.4281 0.4006 0.4299 0.4165 0.4364 0.4188 0.4322 0.4096 0.4364 0.4188 0.4430 0.4212 0.4385 0.4119 0.4006 0.4322 0.4096 0.4385 0.4119 0.4342 0.4028 0.4342 0.4028 0.4385 0.4119 0.4449 0.4141 0.4403 0.4049 0.4385 0.4119 0.4430 0.4212 0.4496 0.4236 0.4449 0.4141 0.4449 0.4141 0.4496 0.4236 0.4562 0.4260 0.4513 0.4164 0.4403 0.4049 0.4449 0.4141 0.4513 0.4164 0.4465 0.4071 0.4259 0.3853 0.4300 0.3939 0.4359 0.3960 0.4316 0.3873 0.4300 0.3939 0.4359 0.3960 0.4342 0.4028 0.4403 0.4049 0.4359 0.3960 0.4403 0.4049 0.4465 0.4071 0.4418 0.3981 0.4316 0.3873 0.4359 0.3960 0.4418 0.3981 0.4373 0.3893 0.4373 0.3893 0.4418 0.3981 0.4475 0.3994 0.4428 0.3906 0.4418 0.3981 0.4465 0.4071 0.4523 0.4085 0.4475 0.3994 0.4475 0.3994 0.4523 0.4085 0.4582 0.4099 0.4532 0.4008 0.4428 0.3906 0.4475 0.3994 0.4532 0.4008 0.4483 0.3919 0.4465 0.4071 0.4513 0.4164 0.4573 0.4178 0.4523 0.4085 0.4513 0.4164 0.4562 0.4260 0.4624 0.4274 0.4573 0.4178 0.4573 0.4178 0.4624 0.4274 0.4687 0.4289 0.4634 0.4193 0.4523 0.4085 0.4573 0.4178 0.4634 0.4193 0.4582 0.4099 0.4582 0.4099 0.4634 0.4193 0.4695 0.4207 0.4641 0.4112 0.4634 0.4193 0.4687 0.4289 0.4750 0.4304 0.4695 0.4207 0.4695 0.4207 0.4750 0.4304 0.4813 0.4319 0.4756 0.4221 0.4641 0.4112 0.4695 0.4207 0.4756 0.4221 0.4700 0.4126 0.4483 0.3919 0.4532 0.4008 0.4589 0.4021 0.4538 0.3931 0.4532 0.4008 0.4582 0.4099 0.4641 0.4112 0.4589 0.4021 0.4589 0.4021 0.4641 0.4112 0.4700 0.4126 0.4646 0.4034 0.4538 0.3931 0.4589 0.4021 0.4646 0.4034 0.4593 0.3944 7B2 7C2 7D2 8A2 8B2 8C2 8D2 Region 7B3 7C3 7D3 8A3 8B3 8C3 8D3 Region 7B4 7C4 7D4 8A4 8B4 8C4 8D4 Copyright (c) 2012-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R), the Cree logo and XLamp(R) are registered trademarks of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. Other trademarks, product, and company names are the property of their respective owners and do not imply specific product and/or vendor endorsement, sponsorship or association. 25 XLamp (R) XP-G2 LED Cree's Standard Cool White Kits Plotted on ANSI Standard Chromaticity Regions 0.40 0.40 5000 K 0.39 0.38 5700 K 0.38 0.37 6500 K 0.36 2B 1S 0T 0.33 0.32 1D 0C 0B 0.31 2A 1B 0S 2D 1C 2U 1U 0D 0A 0.31 0U 0.30 0C 0B 2U ANSI C78.377A 2R 1A 0A 3R 2A 1D 1U 0D 1R 0U 0.30 0R 3A 2D 1C 1B 0S 0.32 1R 2C 2B 1S 0T 3B 2S 1T 8000 K 0.34 0.33 ANSI C78.377A 2R 1A 2T E1 0.35 CCy 8000 K 2C 1T 0.34 3S 6500 K 2S DT 0.35 5700 K 0.37 2T 0.36 CCy 5000 K 0.39 0R 0.29 0.29 0.36 0.35 0.34 0.40 5000 K 0.39 0.38 0.38 3S 51 6500 K 0.36 2C 1S 0T 1B 0C 0D 0A 0A ANSI C78.377A 1U 1R 0U 0.36 0.35 0.28 0.36 0.35 0.34 0.33 0.32 0.28 0.31 0.28 0.30 0.29 0.34 0R 0R 0.29 2U 2R 0D 0.30 0.29 0.28 1D 1A 0.33 0.30 0.31 1R 0U 2A 1B 0C 0B 2D 1C 0.32 0.31 1U 0S 0.32 ANSI C78.377A 2R 1A 1S 0T 0.33 2U 1D 0.34 0.31 0B 3R 2A 2B 0.30 0S 0.32 2D 1C 2C 1T 8000 K 0.29 0.33 CCy 0.34 2T 2S 0.35 3A 2B DV 6500 K 0.36 3B 1T 8000 K 5700 K 0.37 2T 2S 0.35 5000 K 0.39 5700 K 0.37 CCx CCx 0.40 0.40 5000 K 0.39 0.38 0.38 3S 50 6500 K 0.36 6500 K 1U 0.31 1R CCx 0.36 0.35 0.29 0.28 0.36 0.35 0.34 0.33 0.28 0.32 0.28 0.31 0.29 0.30 1R 0R 0R 0.29 ANSI C78.377A 2R 1U 0U 0.30 0.29 0.28 2U 1D 1A 0D 0A 0U 0.30 0C 0B 3R 2A 1B 0.34 0A 0S 0.32 2D 1C 0.33 0.31 ANSI C78.377A 2R 1A 0D 0T 0.33 2U 3A 2B 1S 0.32 0C 0B 1D 8000 K 0.34 0.31 0S 0.32 3R 2A 1B 2C 1T 0.30 0T 0.33 2D 1C 3B 2S 0.35 3A 2B 1S 3S 2T 0.36 3B CCy 8000 K E2 0.37 2C 1T 0.34 5700 K 2T 2S 0.35 5000 K 0.39 5700 K 0.37 CCy 0.33 0.32 0.31 CCx 0.40 CCy 0.30 0.28 CCx 0.29 0.28 0.36 0.35 0.34 0.33 0.32 0.31 0.30 0.29 0.28 0.28 CCx Copyright (c) 2012-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R), the Cree logo and XLamp(R) are registered trademarks of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. Other trademarks, product, and company names are the property of their respective owners and do not imply specific product and/or vendor endorsement, sponsorship or association. 26 XLamp (R) XP-G2 LED Cree's Standard Cool White Kits Plotted on ANSI Standard Chromaticity Regions - Continued 0.40 5000 K 0.39 0.38 5700 K 53 0.37 6500 K 0.36 3B 2S 0.35 2C 1T 8000 K CCy 3S 2T 0.34 0T 0.33 0S 0.32 0C 0.31 3R 2A 2U 1D ANSI C78.377A 2R 1A 0D 0A 2D 1C 1B 0B 3A 2B 1S 1U 1R 0U 0.30 0R 0.29 0.36 0.35 0.34 0.33 0.32 0.31 0.30 0.29 0.28 0.28 CCx Copyright (c) 2012-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R), the Cree logo and XLamp(R) are registered trademarks of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. Other trademarks, product, and company names are the property of their respective owners and do not imply specific product and/or vendor endorsement, sponsorship or association. 27 XLamp (R) XP-G2 LED Cree's Standard Warm and Neutral White Kits Plotted on ANSI Standard Chromaticity Regions 0.46 0.45 2700 K 3000 K 0.44 0.43 0.42 4000 K 0.41 E6 4500 K E5 0.40 CCy E7 3500 K 5000 K 0.39 0.38 E3 0.37 0.36 E4 4B 3C 4D 3B 5B1 5D2 5A3 5D4 6A1 5A2 5D1 5A4 5A1 6D2 6A3 5D3 6A2 6A4 6D1 7A4 7A1 6D4 7A3 7A2 6D3 7D1 8B2 8B3 8C1 8B4 8C2 8C3 8C4 8D3 8D2 8D4 8A4 8D1 8A1 7D4 8A3 8A2 7D3 7D2 8B1 7C4 7C1 7B4 7B1 6C4 6C1 6B4 5C4 6B1 5C1 5B4 4C 6B2 5C3 5C2 5B3 5B2 6C2 6B3 7C2 7B3 7B2 6C3 7C3 E8 ANSI C78.377A 4A 3D 0.35 3A 0.34 0.49 0.48 0.47 0.46 0.45 0.44 0.43 0.42 0.41 0.40 0.39 0.38 0.37 0.36 0.35 0.34 0.33 0.33 CCx 0.46 0.45 2700 K 3000 K 0.44 0.43 3500 K 0.42 4000 K 0.41 4500 K CCy 0.40 F5 5000 K 0.39 F4 0.38 0.37 4B 3C 0.36 4D 3B 5B3 5C4 5C1 5B4 5D3 6A2 5B1 5D2 5A3 5D4 6A1 5A2 5D1 5A4 5A1 6C2 6B3 6B4 6B1 6A3 6A4 7B2 6C3 6B2 5C3 5C2 5B2 4C F6 F7 6C1 6D2 6D1 7B1 6C4 6D3 6D4 7A2 7A1 7A4 F8 7A3 7D1 7C2 7B3 7B4 7C1 7D4 8B1 7C4 7D3 7D2 7C3 8A1 8A2 8A3 8B2 8B3 8B4 8D2 8C1 8C2 8C3 8C4 8D3 8D4 8A4 8D1 ANSI C78.377A 4A 3D 0.35 3A 0.34 0.49 0.48 0.47 0.46 0.45 0.44 0.43 0.42 0.41 0.40 0.39 0.38 0.37 0.36 0.35 0.34 0.33 0.33 CCx Copyright (c) 2012-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R), the Cree logo and XLamp(R) are registered trademarks of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. Other trademarks, product, and company names are the property of their respective owners and do not imply specific product and/or vendor endorsement, sponsorship or association. 28 XLamp (R) XP-G2 LED Cree's Standard Warm and Neutral White Kits Plotted on ANSI Standard Chromaticity Regions Continued 0.46 0.45 2700 K 3000 K 0.44 0.43 0.42 Z6 4000 K 0.41 Z5 4500 K 0.40 CCy Z7 3500 K 5C3 5000 K 0.39 5C2 5B3 0.38 4C 0.37 4B 3C 0.36 4D 3B 6B2 6B4 5C4 6B1 5C1 5B2 6C2 6B3 6A3 5B4 5D3 6A2 5D2 6A4 5A3 5D4 6A1 5A2 5D1 5A4 5A1 5B1 6C1 6D2 6D1 7B1 6C4 6D3 6D4 7A2 7A1 7A4 7B3 7B2 6C3 7B4 7A3 7D1 7C2 7C1 7D4 8B1 7C4 7D3 7D2 7C3 8A1 8A2 8A3 8B2 Z8 8B3 8B4 8D2 8C1 8C2 8C3 8C4 8D3 8D4 8A4 8D1 ANSI C78.377A 4A 3D 0.35 3A 0.34 0.49 0.48 0.47 0.46 0.45 0.44 0.43 0.42 0.41 0.40 0.39 0.38 0.37 0.36 0.35 0.34 0.33 0.33 CCx Copyright (c) 2012-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R), the Cree logo and XLamp(R) are registered trademarks of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. Other trademarks, product, and company names are the property of their respective owners and do not imply specific product and/or vendor endorsement, sponsorship or association. 29 XLamp (R) XP-G2 LED Cree's Standard Chromaticity Kits The following table provides the chromaticity bins associated with chromaticity kits. Color Cool White Neutral White Warm White CCT Kit Chromaticity Bins 7000 K DT 0A, 0B, 0C, 0D, 0R, 0S, 0T, 0U, 1A, 1B, 1C, 1D, 1R, 1S, 1T, 1U 6200 K 51 0A, 0B, 0C, 0D, 0R, 0S, 0T, 0U, 1A, 1B, 1C, 1D, 1R, 1S, 1T, 1U, 2A, 2B, 2C, 2D, 2R, 2S, 2T, 2U, 3A, 3B, 3R, 3S 6000 K 53 1A, 1B, 1C, 1D, 1R, 1S, 1T, 1U, 2A, 2B, 2C, 2D, 2R, 2S, 2T, 3A, 3B, 3S 6000 K 50 1A, 1B, 1C, 1D, 2A, 2B, 2C, 2D 6500 K E1 1A, 1B, 1C, 1D 6000 K DV 1A, 1B, 1C, 1D, 1R, 1S, 1T, 1U, 2A, 2B, 2C, 2D, 2R, 2S, 2T, 2U 5700 K E2 2A, 2B, 2C, 2D 5000 K E3 3A, 3B, 3C, 3D 4750 K F4 3C, 3D, 4A, 4B 4500 K E4 4A, 4B, 4C, 4D 4250 K F5 4C, 4D, 5A1, 5A2, 5A3, 5A4, 5B1, 5B2, 5B3, 5B4 4000 K E5 5A1, 5A2, 5A3, 5A4, 5B1, 5B2, 5B3, 5B4, 5C1, 5C2, 5C3, 5C4, 5D1, 5D2, 5D3, 5D4 4000 K Z5 5A3, 5B4, 5C1, 5D2 3750 K F6 5C1, 5C2, 5C3, 5C4, 5D1, 5D2, 5D3, 5D4, 6A1, 6A2, 6A3, 6A4, 6B1, 6B2, 6B3, 6B4 3500 K E6 6A1, 6A2, 6A3, 6A4, 6B1, 6B2, 6B3, 6B4, 6C1, 6C2, 6C3, 6C4, 6D1, 6D2, 6D3, 6D4 3500 K Z6 6A3, 6B4, 6C1, 6D2 3250 K F7 6C1, 6C2, 6C3, 6C4, 6D1, 6D2, 6D3, 6D4, 7A1, 7A2, 7A3, 7A4, 7B1, 7B2, 7B3, 7B4 3000 K E7 7A1, 7A2, 7A3, 7A4, 7B1, 7B2, 7B3, 7B4, 7C1, 7C2, 7C3, 7C4, 7D1, 7D2, 7D3, 7D4 3000 K Z7 7A3, 7B4, 7C1, 7D2 2850 K F8 7C1, 7C2, 7C3, 7C4, 7D1, 7D2, 7D3, 7D4, 8A1, 8A2, 8A3, 8A4, 8B1, 8B2, 8B3, 8B4 2700 K E8 8A1, 8A2, 8A3, 8A4, 8B1, 8B2, 8B3, 8B4, 8C1, 8C2, 8C3, 8C4, 8D1, 8D2, 8D3, 8D4 2700 K Z8 8A3, 8B4, 8C1, 8D2 Copyright (c) 2012-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R), the Cree logo and XLamp(R) are registered trademarks of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. Other trademarks, product, and company names are the property of their respective owners and do not imply specific product and/or vendor endorsement, sponsorship or association. 30 XLamp (R) XP-G2 LED Bin and Order Code Formats XP-G2 bin codes and order codes are configured in the following manner: Order Code Bin Code Series XPG = XP-G Series XPG = XP-G Color specification 01 = Outdoor White B1 = 70 CRI minimum L1 = Standard CRI H1 = 80 CRI minimum P1 = 85 CRI minimum U1 = 90 CRI minimum Color specification 01 = Outdoor White B1 = 70 CRI minimum L1 = Standard CRI H1 = 80 CRI minimum P1 = 85 CRI minimum U1 = 90 CRI minimum Internal code Chromaticity bin SSSCCC-BD-HHHH-NNNNN Kit number Version 1 = Standard E = High Efficacy Color BWT = Gen 2 White Internal code SSSCCC-BD-WWW-FF-G-AA Luminous flux group Version 1 = Standard E = High Efficacy Color BWT = Gen 2 White Copyright (c) 2012-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R), the Cree logo and XLamp(R) are registered trademarks of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. Other trademarks, product, and company names are the property of their respective owners and do not imply specific product and/or vendor endorsement, sponsorship or association. 31 XLamp (R) XP-G2 LED Reflow Soldering Characteristics In testing, Cree has found XLamp XP-G2 LEDs to be compatible with JEDEC J-STD-020C, using the parameters listed below. As a general guideline, Cree recommends that users follow the recommended soldering profile provided by the manufacturer of the solder paste used, and therefore it is the lamp or luminaire manufacturer's responsibility to determine applicable soldering requirements. Note that this general guideline may not apply to all PCB designs and configurations of reflow soldering equipment. tP TP Critical Zone TL to TP Temperature Ramp-up TL tS Tsmax Tsmin Ramp-down ts Preheat 25 t 25C to Peak IPC/JEDEC J-STD-020C Time Profile Feature Average Ramp-Up Rate (Tsmax to Tp) Preheat: Temperature Min (Tsmin) Preheat: Temperature Max (Tsmax) Preheat: Time (tsmin to tsmax) Time Maintained Above: Temperature (TL) Time Maintained Above: Time (tL) Peak/Classification Temperature (Tp) Lead-Free Solder 1.2 C/second 120 C 170 C 65-150 seconds 217 C 45-90 seconds 235 - 245 C Time Within 5 C of Actual Peak Temperature (tp) 20-40 seconds Ramp-Down Rate 1 - 6 C/second Time 25 C to Peak Temperature 4 minutes max. Note: All temperatures refer to topside of the package, measured on the package body surface. Copyright (c) 2012-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R), the Cree logo and XLamp(R) are registered trademarks of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. Other trademarks, product, and company names are the property of their respective owners and do not imply specific product and/or vendor endorsement, sponsorship or association. 32 XLamp (R) XP-G2 LED Notes Measurements The luminous flux, radiant power, chromaticity, forward voltage and CRI measurements in this document are binning specifications only and solely represent product measurements as of the date of shipment. These measurements will change over time based on a number of factors that are not within Cree's control and are not intended or provided as operational specifications for the products. Calculated values are provided for informational purposes only and are not intended or provided as specifications. PreRelease Qualification Testing Please read the LED Reliability Overview for details of the qualification process Cree applies to ensure long-term reliability for XLamp LEDs and details of Cree's pre-release qualification testing for XLamp LEDs. Lumen Maintenance Cree now uses standardized IES LM-80-08 and TM-21-11 methods for collecting long-term data and extrapolating LED lumen maintenance. For information on the specific LM-80 data sets available for this LED, refer to the public LM-80 results document. Please read the Long-Term Lumen Maintenance application note for more details on Cree's lumen maintenance testing and forecasting. Please read the Thermal Management application note for details on how thermal design, ambient temperature, and drive current affect the LED junction temperature. Moisture Sensitivity Cree recommends keeping XLamp LEDs in the provided, resealable moisture-barrier packaging (MBP) until immediately prior to soldering. Unopened MBPs that contain XLamp LEDs do not need special storage for moisture sensitivity. Once the MBP is opened, XLamp XP-G2 LEDs may be stored as MSL 1 per JEDEC J-STD-033, meaning they have unlimited floor life in conditions of 30 C/85% relative humidity (RH). Regardless of the storage condition, Cree recommends sealing any unsoldered LEDs in the original MBP. RoHS Compliance The levels of RoHS restricted materials in this product are below the maximum concentration values (also referred to as the threshold limits) permitted for such substances, or are used in an exempted application, in accordance with EU Directive 2011/65/EC (RoHS2), as implemented January 2, 2013. RoHS Declarations for this product can be obtained from your Cree representative or from tthe Product Ecology section of the Cree website. REACh Compliance REACh substances of very high concern (SVHCs) information is available for this product. Since the European Chemical Agency (ECHA) has published notice of their intent to frequently revise the SVHC listing for the foreseeable future, please contact a Cree representative to insure you get the most up-to-date REACh Declaration. REACh banned substance information (REACh Article 67) is also available upon request. Copyright (c) 2012-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R), the Cree logo and XLamp(R) are registered trademarks of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. Other trademarks, product, and company names are the property of their respective owners and do not imply specific product and/or vendor endorsement, sponsorship or association. 33 XLamp (R) XP-G2 LED Notes - Continued UL(R) Recognized Component This product meets the requirements to be considered a UL Recognized Component with Level 4 enclosure consideration. The LED package or a portion thereof has been investigated as a fire and electrical enclosure per ANSI/UL 8750. Vision Advisory WARNING: Do not look at an exposed lamp in operation. Eye injury can result. For more information about LEDs and eye safety, please refer to the LED Eye Safety application note. Copyright (c) 2012-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R), the Cree logo and XLamp(R) are registered trademarks of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. Other trademarks, product, and company names are the property of their respective owners and do not imply specific product and/or vendor endorsement, sponsorship or association. 34 6 5 NOTICE CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION CONTAINED WITHIN ARE THE PROPRIETARY AND CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY UNAUTHORIZED PERSON THE WITHOUT WRITTEN CONSENT OF CREE INC. 1 1.01 3 Mechanical Dimensions (TA = 25 C) Thermal vias, if present, are not shown on these drawings. D All measurements are .13 mm unless otherwise indicated.3.30 .50 2.30 2.26 .73 3.45 .50 OPTICAL REFERENCE 3.45 4 4 OPTICAL REFERENCE 2 2 3 3 C REV REV 1 1 REVISONS REVISONS R1.53 DESCRIPTION DESCRIPTION BYBY DATE APP'D DATE APP'D 1.30 .58 Top View Side View 3.30 3.30 .73.73 3.30 REF. 3.30 REF. .50.50 .50 PRIMARY D D .50.50 2.30 2.30 2.26 2.26 .50 .64 .50 B 3.30 3.30 3.30 R1.53 R1.53 30 XLamp (R) XP-G2 LED 4 .25 C C 3.30 Anode .58.58 3.30 REF. 3.30 REF. .75 Anode 1.30 1.30 ALTERNATIVE ALTERNATIVE PRIMARY PRIMARY Bottom View 1.30 2.30 3.30 3.30 A RECOMMENDED PCB SOLDER PAD UNLESS OT DIMENSI MILLIMETER TOLERANCE .XX .XXX X THIRD ANGLE PROJECTION FOR SHEET .X .XX .XXX X SURFACE F RECOMMENDED STENCIL PATTERN (HATCHED AREA IS OPENING) .64.64 6 ALL DIMENSIONS 1.01 Alternate Bottom View 5 4 B B 3 .25.25 Copyright (c) 2012-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R), the Cree logo and XLamp(R) are registered trademarks of Cree, Inc. UL(R) and .75 the UR logo are registered trademarks of UL LLC. .75Other trademarks, product, and company names are the property of their respective owners and do not imply specific product and/or vendor endorsement, sponsorship or association. 35 ALLALL DIMENSIONS ARE .13MM UNLESS OTHERWISE NOTED DIMENSIONS ARE .13MM UNLESS OTHERWISE NOTED 3.45 3.30 3.45 XLamp (R) XP-G2 LED OPTICAL OPTICAL REFERENCE REFERENCE C R 1.53 R 1.53 Mechanical Dimensions (TA = 25 C) - Continued 3.50 3.50 .30 .30 .30 .30 .58 1.30 .58 1.30 PRIMARY PRIMARY 3.30 3.30 .50 .50 .50 .50 .56 .56 .56 .56 .43 .83 3.50 3.30 3.50 3.30 3.30 .29 .83 3.30 .18 .18 .56 B A 3.30 .09 .70 1.50 .70 1.30 1.50 Recommended Copper Layout .50 1.30 .50 Recommended Solder Pad RECOMMENDED SOLDERSOLDER PAD PAD RECOMMENDED (Solder Mask Pattern) (SOLDER RESIST PATTERN) (SOLDER RESIST PATTERN) RECOMMENDED COPPER LAYOUT RECOMMENDED COPPER LAYOUT .43 .29 .18 .18 .56 .09 .19 .50 .19 .50 3.30 .50 .18 .18 .50 3.30 Recommended Stencil Openings* RECOMMENDED STENCIL OPENINGS RECOMMENDED STENCIL OPENINGS DATE DRAWN BY DRAWN UNLESSUNLESS OTHERWISE SPECIFIED OTHERWISE SPECIFIED D.ARE CRONIN 10/6/1 D. CRONI Notes: DIMENSIONS ARE IN DIMENSIONS IN CHECK MILLIMETERS AND AFTER FINISH. CHECK MILLIMETERS AND AFTERDATE FINIS ALLto DIMENSIONS ARE .13MM UNLESSUNLESS OTHERWISE NOTEDNOTEDTOLERANCE ALL DIMENSIONS ARE thermal .13MM OTHERWISE * Cree recommends using thermal pad kickouts maximize component performance. UNLESSUNLESS SPECIFIED: TOLERANCE SPECIFIED .XX .XX .25 .25 DATE APPROVED APPROV .XXX .XXX .125 .125 * Cree recommends using white solder mask material to minimize system optical loss. X X .5 .5 THIRDTHIRD ANGLE PROJECTION (R) (R) ANGLE PROJECTION MATERIAL MATERIA * This stencil has been tested and optimized for the avoidance of voiding when using ALPHA LUMET P30FOR Maxrel solder paste. For SHEET METAL PARTS ONLY FOR SHEET METAL PARTS ONL .X .X 1.5 1.5 other solder pastes, a "window pane" design for the thermal pad stencil may result in a lower voiding percentage. .XXContact .XX .75 your .75local .XXX .XXX .25 FINAL PROTECTIV .25 FINAL PRO X X .5 .5 Cree Field Applications Engineer for consultation regarding your specific application. 1.6 1.6 SURFACE FINISH:FINISH: SURFACE 6 6 5 5 4 4 3 2 3 Copyright (c) 2012-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R), the Cree logo and XLamp(R) are registered trademarks of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. Other trademarks, product, and company names are the property of their respective owners and do not imply specific product and/or vendor endorsement, sponsorship or association. 36 2 REF REF 4.375 X SECTION Y-Y R Ao 4 2.2 0. 0 Po 4.0 0.1 (II) CATHODE SIDE Y 5 4.375 F(III) 5 3.70 2.40 5.50 8.00 12.00 +/- 0.1 +0.0/-0.1 +/- 0.05 X 3.70 +/- 0.1 Bo Ko F 3.70 2.40 5.50 8.00 12.00 +/- 0.1 +0.0/-0.1 +/- 0.05 +/- 0.1 +0.3/-0.1 (I) 4 Ao REV B REF 0.59 4 Measured from centerline of sprocket hole to centerline of pocket. (II) Cumulative tolerance of 10 sprocket 2 1 holes is 0.20. REVISONS (III) Measured from centerline of sprocket BY DATE APP'D DESCRIPTION ADDED CATHODE AND ANODE NOTE hole to centerlineDC of pocket. 2/26/12 REORIENTED DEVICE (IV) Other material available. ANODE SIDE 3 P1 2.2 P1 W Y R SECTION Y-Y D1 1.5 MIN. +/- 0.1 REF Bo Ko F NOTICE CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION CONTAINED WITHIN ARE THE PROPRIETARY AND CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY UNAUTHORIZED PERSON WITHOUTTHE WRITTEN CONSENT OF CREE INC. 3.70 Ao P1 W W Bo Ao R0.2 TYPICAL Ko All dimensions in mm. E1 1.75 0.1 5 P2 2.0 0.05 (I) X 6 Y D1 1.5 MIN. REF 1.5 SECTION X-X REF R R0.2 TYPICAL Ko R0.2 TYPICAL Y Ko P1 D1 All Cree carrier tapes conform to EIA-481D, Automated Component Handling Systems Standard. 1.5 MIN. SECTION Y-Y REF 0.59 Tape and Reel Do F(III) Bo XLamp (R) XP-G2 LED Bo X T 0.30 0.05 4.375 +/- 0.1 +0.3/-0.1 D D SECTION X-X 1.5 .1 Ao 3.70 8.1 3.70 +/- 0.1 2.40 +0.0/-0.1 5.50 +/- 0.05 8.00 P1 +/- 0.1 6 NOTICE CREE CONFIDENTIAL. THIS PLOT AND W 12.00THE INFORMATION +0.3/-0.1 Bo Ko F User Feed Direction +/- 0.1 END 5 4 Loaded Pockets (1000 Lamps) 6 NOTICE CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION CONTAINED WITHIN ARE THE PROPRIETARY AND CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY UNAUTHORIZED PERSON WITHOUT THE WRITTEN CONSENT OF CREE, INC. +.3 2 -.0 3 OE Foxit PDF Editor a1/4aeEEuO (c) by Foxit Software Company, 2004 1/2oOAOUAEAA C 1 ANODE SIDE Trailer 160mm (min) of empty pockets sealed with tape (20 pockets min.) D Measured from centerline of sprocket hole to centerline of pocket. 4.1 Cumulative tolerance of 10 sprocket 2.5.1 1.75 STARTholes is 0.20. .10 (III) Measured from centerline of sprocket hole to centerline of pocket. (IV) Other material available. 12.0 (II) CATHODE SIDE CONTAINED WITHIN ARE THE PROPRIETARY AND CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY UNAUTHORIZED PERSON WITHOUT THE WRITTEN CONSENT OF CREE, INC. C (I) 5 4 Leader 400mm (min.) of empty pockets with at least 100mm sealed by tape (50 empty pockets min.) D 3 2 OE Foxit PDF Editor a1/4aeEEuO (c) by Foxit Software Company, 2004 1/2oOAOUAEAA 1 16.40 User Feed Direction O190 B D D B C Carrier Tape C 16.40 Pocket Tape O190 O61 0.5 13mm C 7" OD C A 7.5 12.40 +2.00 0 MEASURED AT HUB '' THIRD ANGLE PROJECTION B UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN MILLIMETERS AND AFTER FINISH. TOLERANCE UNLESS SPECIFIED: .XX .25 .XXX .125 X .5 DATE DRAWN BY D. CRONIN DATE --- -- 6 5 OD 4 -- 1.6 7.5 3 '' Fax (919) 313-5558 A DATE APPROVED FOR SHEET METAL PARTS ONLY MATERIAL .X 1.5 .XX .75 O61 FINAL 0.5 .XXX .25 PROTECTIVE FINISH X .5 SURFACE FINISH: Phone (919) 313-5300 -- -- O13 4600 Silicon Drive Durham, N.C 27703 11/29/10 CHECK TITLE SIZE SCALE B XP HEW LOADING SPEC C REV. DRAWING NO. 2402-00014 SHEET 3.000 2 B OF 1 /1 1 12.40 12.40 +2.00 0 MEASURED AT INSIDE EDGE MEASURED AT HUB B B Copyright (c) 2012-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R), the Cree logo and XLamp(R) are registered trademarks of Cree, Inc. UL(R) and O13 OTHERWISE SPECIFIED 2012/5/25 theAUR logo are registered trademarks of UL LLC. Other trademarks, product, and company names are the property of theirUNLESS respective and do not imply specific product and/or vendor endorsement, DIMENSIONS ARE IN owners LIUDEZHI MILLIMETERS & BEFORE FINISH. sponsorship or association. TOLERANCE UNLESS SPECIFIED: 12.40 THIRD ANGLE PROJECTION MEASURED AT INSIDE EDGE DRAWN BY DATE CHECK DATE .X 0.3 .XX .13 APPROVED DATE X MATERIAL 1 FOR SHEET METAL PARTS ONLY .X .25 4600 Silicon Drive Durham, N.C 27703 Phone (919) 361-4770 A TITLE PS FINAL PROTECTIVE FINISH Reel, SIZE 7" x 12mm Wide DRAWING NO. 2400-00005 REV. B 37 XLamp (R) XP-G2 LED Packaging Unpackaged Reel Vacuum-Sealed Vacuum-Sealed Moisture Barrier Bag Moisture Barrier Bag Label CREE Binwith Code Cree Bin & Barcode LabelLot # Code, Qty, Label with Cree Bin Code, Quantity, Reel ID Label with Cree Bin Label with Customer P/N, Qty,Qty, Lot #, Lot PO # # Code, Packaged Reel Patent Label Label with Customer Order Label with Cree Order Code, Code, Qty, Reel ID, PO # Quantity, Reel ID, PO # Label with Cree Bin Code, Quantity, Reel ID Boxed Reel Label with Cree Order Code, Quantity, Reel ID, PO # Label with Cree Bin Code, Quantity, Reel ID Patent Label (on bottom of box) Copyright (c) 2012-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R), the Cree logo and XLamp(R) are registered trademarks of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. Other trademarks, product, and company names are the property of their respective owners and do not imply specific product and/or vendor endorsement, sponsorship or association. 38 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Cree, Inc.: XPGBWT-01-0000-00GD3 XPGBWT-01-0000-00HE4 XPGBWT-01-R250-00EC1 XPGBWT-H1-R250-00BF8 XPGBWT-H1-R250-00BZ8 XPGBWT-H1-R250-00CE8 XPGBWT-H1-R250-00DF6 XPGBWT-L1-0000-00F51 XPGBWT-L1-R250-00DZ5 XPGBWT-L1-R250-00FE3 XPGBWT-01-0000-00ED5 XPGBWT-01-R250-00GE4 XPGBWT-H1-0000-00EF6 XPGBWT-H1-R250-00CZ6 XPGBWT-L1-R250-00EZ5 XPGBWT-L1-R250-00FE1 XPGBWT-01-0000-00FC1 XPGBWT-01-0000-00FD1 XPGBWT-01-0000-00FE6 XPGBWT-01-0000-00FF5 XPGBWT01-0000-00HD1 XPGBWT-01-R250-00FD3 XPGBWT-H1-0000-00DE5 XPGBWT-H1-R250-00EF6 XPGBWT-L10000-00FE4 XPGBWT-L1-0000-00HE1 XPGBWT-L1-R250-00FF5 XPGBWT-L1-R250-00CZ7 XPGBWT-01-000000FC5 XPGBWT-01-0000-00GD2 XPGBWT-01-0000-00HE3 XPGBWT-01-R250-00GD1 XPGBWT-H1-0000-00DE7 XPGBWT-H1-0000-00EE5 XPGBWT-H1-R250-00CF8 XPGBWT-L1-0000-00CF8 XPGBWT-L1-R250-00DF5 XPGBWT-L1-R250-00DZ6 XPGBWT-L1-R250-00DZ7 XPGBWT-01-0000-00DC5 XPGBWT-01-0000-00DC6 XPGBWT-01-0000-00DD5 XPGBWT-01-0000-00DF6 XPGBWT-01-0000-00EC1 XPGBWT-01-0000-00EC2 XPGBWT-01-0000-00EC3 XPGBWT-01-0000-00EC4 XPGBWT-01-0000-00EC5 XPGBWT-01-0000-00EC6 XPGBWT-01-0000-00ED1 XPGBWT-01-0000-00ED2 XPGBWT-01-0000-00ED3 XPGBWT-01-0000-00ED4 XPGBWT-01-0000-00EE3 XPGBWT-01-0000-00EE4 XPGBWT-01-0000-00EE6 XPGBWT-01-0000-00EF4 XPGBWT01-0000-00EF5 XPGBWT-01-0000-00EF6 XPGBWT-01-0000-00FC2 XPGBWT-01-0000-00FC3 XPGBWT-01-000000FC4 XPGBWT-01-0000-00FC6 XPGBWT-01-0000-00FD2 XPGBWT-01-0000-00FD3 XPGBWT-01-0000-00FD4 XPGBWT-01-0000-00FD5 XPGBWT-01-0000-00FE3 XPGBWT-01-0000-00FE4 XPGBWT-01-0000-00FE5 XPGBWT01-0000-00FF4 XPGBWT-01-0000-00FF6 XPGBWT-01-0000-00GC1 XPGBWT-01-0000-00GC2 XPGBWT-01-000000GC4 XPGBWT-01-0000-00GC5 XPGBWT-01-0000-00GD1 XPGBWT-01-0000-00GD4 XPGBWT-01-0000-00GE3 XPGBWT-01-0000-00GE4 XPGBWT-01-0000-00GE5 XPGBWT-01-0000-00GF4 XPGBWT-01-0000-00GF5 XPGBWT-01-0000-00HC1 XPGBWT-01-0000-00HC2 XPGBWT-01-0000-00HF4 XPGBWT-01-R250-00DC5 XPGBWT-01-R250-00DC6 XPGBWT-01-R250-00DD5 XPGBWT-01-R250-00DE6 XPGBWT-01-R250-00DF6 XPGBWT-01-R250-00EC2 XPGBWT-01-R250-00EC3 XPGBWT-01-R250-00EC4 XPGBWT-01-R250-00EC5 XPGBWT-01-R250-00EC6 XPGBWT-01-R250-00ED1 XPGBWT-01-R250-00ED2 XPGBWT-01-R250-00ED3 XPGBWT-01-R250-00ED4