Tel : +44 118 979 1238
Fax : +44 118 979 1283
Email: info@actcrystals.com
In keeping with our ongoing policy of product evolvement and improvement, the above specification is subject to change without notice.
ISO9001: 2000 Registered - Registration number 6830/2
For quotations or further information please contact us at:
3 The Business Centre, Molly Millars Lane, Wokingham, Berks, RG41 2EY, UK
http://www.actcrystals.com
The ACTF8014/897.5/DCC6 is a low-loss, compact, and economical surface-acoustic-wave (SAW)
RF filter in a surface-mount ceramic DCC6 case for mobile communications ISM900 systems. It
provides low insertion loss and high attenuation. ( Nominal Centre Frequency 897.5 MHz)
1. Package Dimension (DCC6) 2.
3. Test Circuit
Pin Configuration
2 Input
5 Output
1,3,4,6 Ground
Sign Data (unit: mm) Sign Data (unit: mm)
A 1.9 E 1.2
B 0.64 F 3.8
C 1.0 G 3.8
D 1.27
Issue : 1 C1
Date : SEPT 04
Tel : +44 118 979 1238
Fax : +44 118 979 1283
Email: info@actcrystals.com
In keeping with our ongoing policy of product evolvement and improvement, the above specification is subject to change without notice.
ISO9001: 2000 Registered - Registration number 6830/2
For quotations or further information please contact us at:
3 The Business Centre, Molly Millars Lane, Wokingham, Berks, RG41 2EY, UK
http://www.actcrystals.com
4. Frequency Characteristics
5. Performance
5-1.Maximum Ratings
Rating Value Units
Input Power Level Pin 10 dBm
DC Voltage VDC 12 V
Storage Temperature Range Tstg -40 to +85 °C
Operating Temperature Range
TA
-10 to +65 °C
Issue : 1 C1
Date : SEPT 04
Tel : +44 118 979 1238
Fax : +44 118 979 1283
Email: info@actcrystals.com
In keeping with our ongoing policy of product evolvement and improvement, the above specification is subject to change without notice.
ISO9001: 2000 Registered - Registration number 6830/2
For quotations or further information please contact us at:
3 The Business Centre, Molly Millars Lane, Wokingham, Berks, RG41 2EY, UK
http://www.actcrystals.com
5-2.Electronic Characteristics
Characteristic Minimum Typical Maximum Units
Nominal Centre Frequency fC
-- 897.500 -- MHz
Usable Pass Bandwidth BW -- 26 -- MHz
Insertion Loss IL
884.50 …. 910.50 MHz -- 3.0 4.5 dB
Passband Ripple Δ α
884.50 …. 910.50 MHz -- -- 2.0 dB
Absolute Attenuation α
DC …. 783.00 MHz
783.00 …. 863.00 MHz
933.00 …. 1063.0 MHz
1063.0 …. 2000.0 MHz
25
28
32
20
27
33
42
25
--
--
--
--
dB
dB
dB
dB
Input / Output Impedance (Nominal) 50 Ω
iCAUTION: Electrostatic Sensitive Device. Observe precautions for handling!
1. Unless noted otherwise, all measurements are made with the filter installed in the specified test fixture that is
connected to a 50Ω test system with VSWR≤1.2:1. The test fixture L and C are adjusted for minimum insertion
loss at the filter centre frequency, fC. Note that insertion loss, bandwidth, and passband shape are dependent on
the impedance matching component values and quality.
2. Unless noted otherwise, specifications apply over the entire specified operating temperature range.
3. The specifications of this device are based on the test circuit shown above and subject to change or
obsolescence without notice.
4. All equipment designs utilizing this product must be approved by the appropriate government agency prior to
manufacture or sale.
5. Our liability is only assumed for the Surface Acoustic Wave (SAW) component(s) per se, not for applications,
processes and circuits implemented within components or assemblies.
Issue : 1 C1
Date : SEPT 04
