ER100S THRU ER106S SUPERFAST RECOVERY RECTIFIERS VOLTAGE - 50 to 600 Volts CURRENT - 1.0 Ampere FEATURES A-405 l Superfast recovery times-epitaxial construction l Low forward voltage, high current capability l Exceeds environmental standards of MIL-S-19500/228 l Hermetically sealed l Low leakage l High surge capability l Plastic package has Underwriters Laboratories Flammability Classification 94V-O utilizing Flame Retardant Epoxy Molding Compound MECHANICAL DATA Case: Molded plastic, A-405 Terminals: Axial leads, solderable to per MIL-STD-202, Method 208 Polarity: Color Band denotes cathode end Mounting Position: Any Weight: 0.008 ounce, 0.22 gram MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25 ambient temperature unless otherwise specified. Resistive or inductive load, 60Hz. ER100S ER101S ER101AS ER102S ER103S ER104S ER106S UNITS Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximum Average Forward Current .375"(9.5mm) lead lengths at TA=55 50 35 50 100 70 100 150 105 150 Peak Forward Surge Current, IFM (surge): 8.3ms single half sine-wave superimposed on rated load(JEDEC method) Maximum Forward Voltage at 1.0A DC 200 140 200 1.0 300 210 300 400 320 400 600 420 600 .95 NOTES: 1. Reverse Recovery Test Conditions: IF=.5A, IR=1A, Irr=.25A V V A A 30.0 Maximum DC Reverse Current at Rated DC Blocking Voltage Maximum DC Reverse Current at Rated DC Blocking Voltage TA=125 Maximum Reverse Recovery Time(Note 1) Typical Junction capacitance (Note 1) Typical Junction Resistance(Note 2) R JA Operating and Storage Temperature Range TJ V 1.25 1.7 V 5.0 A 150 A 35.0 17 50 -55 to +150 ns PF /W 2. Measured at 1 MHz and applied reverse voltage of 4.0 VDC 3. Thermal resistance from junction to ambient and from junction to lead length 0.375"(9.5mm) P.C.B. mounted RATING AND CHARACTERISTIC CURVES ER100S THRU ER106S Fig. 1-REVERSE RECOVERY TIME CHARACTERISTIC AND TEST CIRCUIT DIAGRAM Fig. 2-MAXIMUM NON-REPETIVIE SURGE CURRENT Fig. 3-MAXIMUM AVERAGE FORWARD CURRENT RATING Fig. 4-FORWARD CURRENT DERATING CURVE Fig. 5-TYPICAL REVERSE CHAPACTERISTICS Fig. 6-TYPICAL JUNCTION CAPACITANCE