ER100S THRU ER106S
SUPERFAST RECOVERY RECTIFIERS
VOLTAGE - 50 to 600 Volts CURRENT - 1.0 Ampere
FEATURES
l Superfast recovery times-epitaxial construction
l Low forward voltage, high current capability
l Exceeds environmental standards of MIL-S-19500/228
l Hermetically sealed
l Low leakage
l High surge capability
l Plastic package has Underwriters Laboratories
Flammability Classification 94V-O utilizing
Flame Retardant Epoxy Molding Compound
MECHANICAL DATA
Case: Molded plastic, A-405
Terminals: Axial leads, solderable to per MIL-STD-202,
Method 208
Polarity: Color Band denotes cathode end
Mounting Position: Any
Weight: 0.008 ounce, 0.22 gram
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25 ambient temperature unless otherwise specified.
Resistive or inductive load, 60Hz.
ER100S
ER101S
ER101AS
ER102S
ER103S
ER104S
ER106S
UNITS
Maximum Recurrent Peak Reverse Voltage
50 100 150 200 300 400 600 V
Maximum RMS Voltage 35 70 105 140 210 320 420 V
Maximum DC Blocking Voltage 50 100 150 200 300 400 600 V
Maximum Average Forward
Current .375"(9.5mm) lead lengths
at TA=55
1.0 A
Peak Forward Surge Current, IFM (surge):
8.3ms single half sine-wave superimposed
on rated load(JEDEC method)
30.0 A
Maximum Forward Voltage at 1.0A DC .95 1.25 1.7 V
Maximum DC Reverse Current
at Rated DC Blocking Voltage 5.0 A
Maximum DC Reverse Current at
Rated DC Blocking Voltage TA=125 150 A
Maximum Reverse Recovery Time(Note 1) 35.0 ns
Typical Junction capacitance (Note 1) 17 PF
Typical Junction Resistance(Note 2) RJA 50 /W
Operating and Storage Temperature Range TJ -55 to +150
NOTES:
1. Reverse Recovery Test Conditions: IF=.5A, IR=1A, Irr=.25A
A-405
2. Measured at 1 MHz and applied reverse voltage of 4.0 VDC
3. Thermal resistance from junction to ambient and from junction to lead length 0.375”(9.5mm) P.C.B. mounted
RATING AND CHARACTERISTIC CURVES ER100S THRU ER106S
Fig. 1-REVERSE RECOVERY TIME CHARACTERISTIC Fig. 2-MAXIMUM NON-REPETIVIE SURGE
AND TEST CIRCUIT DIAGRAM CURRENT
Fig. 3-MAXIMUM AVERAGE FORWARD CURRENT RATING Fig. 4-FORWARD CURRENT DERATING CURVE
Fig. 5-TYPICAL REVERSE CHAPACTERISTICS Fig. 6-TYPICAL JUNCTION CAPACITANCE
