0.8 mm pitch connector Right-angle through hole type female connector for PCB HDRA-E100LFDT( )-( )+ For PCB Right-angle Through hole ANSI/SFF8441 Configuration of product Part No. HDRA- E 100 LFD T ( )- ( )+ 14.7 9.5 0.1 4.3 Length of contacts and board lock pins Blank : A-2.08 mm contacts B-2.28 mm board lock pins 1 : A-3.4 mm contacts B-2.6 mm board lock pins Lock screws Blank: None SL : provided (Thickness of panel: 1.12 mm) o10.05 POS.#100 (PAD) POS.#50 100-o0.650.05 (P.T.H.) POS.#2 POS.#1 1.150.05 4.90.1 2.250.05 Series name No. of contacts: 100 Type of contact LFD: Right-angle through hole type, female With board lock pin 3.4 4.7750.1 2-o1.750.08 58.7 53.7 47.65 44.3 42.4 0.824=19.2 Recommended PCB layout t=1.6mm 3.5 1 51 POS.#100 21.1 6 0.3 POS.#51 21.1 1.55 3.925 5.3 57.9 A B 50 2.3 3.46 POS.#1 100 0.3 : PAD 0.824=19.2 0.8 POS.#50 0.8 1.2 o1.20.05 o2.250.1 Edge of PCB (P.T.H.) (PAD) 0.05 0.824=19.20.05 (4) 0.824=19.2 0.1 42.4 48.350.1 57.90.1 1.150.05 (Two lock screws are supplied with a connector.) 6.3MAX. 2.6250.05 0.05 1.15 4.880.08 2.40.08 1.2 1.15 50.70.1 Components R Contacts Brackets Insulator Hold downs 53.70.1 Select the connector according to panel thickness. For the application without panel, use washers or special lock screw (P/N: HDRA-E68LFD-7C). Recommended panel cut-out dimensions Mating connector: HDRA series IDC type male connector Through hole SMT Press-in IDC Wire Soldering Crimping wrapping Others Square nuts Lock screws Shell