308 Constitution Drive
Menlo Park, CA 94025-1164
Phone: 800-227-4856
www.circuitprotection.com
PolySwitch®
PTC Devices
Overcurrent Protection Devi ce
Raychem Circuit Protection Products
PRODUCT: TRF250-145
DOCUMENT: SCD 26221
PCN: RF0021-000, RF0035-000
REV LETTER: D
REV DATE: MAY 22, 2007
PAGE NO.: 1 OF 1
Specification Status: RELEASED
Max Electrical Rating at 20ºC
Operating Voltage: 60VDC
Interrupt Current: 3ARMS
Fault Voltage: 250VRMS
Lead Material: 22 AWG Sn plated copper
(0.65 mm [0.026”] nominal diameter)
External Coating Material: Cured, flame retardant
epoxy polymer, meeting UL94 V-0 requirements.
Marking:
TABLE I. DIMENSIONS:
A B C D E F
MIN MAX MIN MAX MIN MAX MIN MAX NOM MIN MAX
mm: -- 6.5 -- 11.0 -- 4.6 4.7 -- 5.0 -- 7.0
in: -- (0.256) -- (0.433) -- (0.180) (0.185) -- (0.197) -- (0.276)
TABLE II. PERFORMANCE RATINGS @ 20ºC (unless otherwise noted):
IHOLD (A) ITRIP (A) RESISTANCE (Ω)
@ 20°C
TIME TO TRIP (s)
@ 1A
20°C 20°C R MIN R MAX R1 MAX* TYP MAX
0.145 0.290 3.0 6.0 14.0 2.5 5.0
* Maximum device resistance at 20°C measured 1 hour post trip.
Additional Ratings @ 20°C
Lightning Withstand ITU-T @ 1.5kV
Agency Recognition: UL, CSA, TUV
Reference Documents: PS300
Precedence: This specification takes precedence over documents referenced herein.
Effectivity: Reference documents shall be the issue in effect on the date of invitation for bid.
CAUTION: Operation beyond the rated voltage or current may result in rupture, electrical arcing or flame.
ROHS Compliant ELV Compliant Pb-Free
© 2006, 2007 Tyco Electronics Corporation. All rights reserved.
Ra
y
chem Lo
g
o
Lot Identification
Part Identification
45 F
RoHS Indication
