FEATURES
• For surface mounted applications in order to
optimize board space
• Low profile package
• Built-in strain relief
• Glass passivated junction
• Low inductance
• Excellent clamping capability
• Repetition rate (duty cycle):0.01%
• Fast response time: typically less than
1.0 ps from 0 volts to BV for unidirectional types
• Typical IR less than 1µA above 10V
• High temperature soldering:
250°C/10 seconds at terminals
• Plastic package has Underwriters Laboratory
Flammability Classification 94 V-O
MECHANICAL DATA
Case: JEDEC DO214AB. Molded plastic over glass
passivated junction
Terminals: Solder plated, solderable per
MIL-STD-750, Method 2026
Polarity: Color band denoted positive end (cathode) Dimensions in inches and (millimeters)
except Bidirectional
Standard Packaging: 12mm tape (EIA STD RS-481)
Weight: 0.007 ounces, 0.021 grams)
Ratings at 25°C ambient temperature unless otherwise specified.
RATING SYMBOL
V
ALUE UNITS
Peak Pulse Power Dissipation on 10/1000 µs
waveform (NOTE 1, 2, Fig.1) IPPM SEE TABLE 1 Amps
Superimposed on Rated Load, (JEDEC Method)(Note2, 3)
Operatings and Storage Temperature Range TJ, TSTG -55 +150 °C
NOTES:
1. Non-repetitive current pulse, per Fig.3 and derated above Ta=25 °C per Fig.2.
2. Mounted on Copper Pad area of 0.8x0.8" (20x20mm) per Fig.5.
3. 8.3ms single half sine-wave, or equivalent square wave, Duty cycle=4 pulses per minutes maximum.
Certified RoHS Compliant
UL File # E223026
Peak Pulse Current of on 10/1000 µs waveform (Note 1,Fig 3)
IFSM 300 Amps
Peak Forward Surge Current, 8.3ms Single Half Sine-wave
MAXIMUM RATINGS AND CHARACTERISTIC
S
Electrical characteristics apply in both directions.
For Bidirectional use Suffix for types 5.0SMLJ12A thru types 5.0SMLJ170A (e.g. 5.0SMLJ12CA, 5.0SMLJ45CA)
DEVICES FOR BIPOLAR APPLICATION
S
PPPM Minimum 5000 Watts
SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR
VOLTAGE-5.0 TO 170 Volts
5000 Watt Peak Pulse Power
MDE Semiconductor, Inc.
78-150 Calle Tampico, Unit 210, La Quinta, CA., USA 92253 Tel : 760-564-8656 • Fax : 760-564-2414
1-800-831-4881 Email: sales@mdesemiconductor.com Web: www.mdesemiconductor.com
5.0 SMLJ SERIES
5/1/2012
MDE Semiconductor, Inc.
78-150 Calle Tampico, Unit 210, La Quinta, CA., USA 92253 Tel : 760-564-8656 • Fax : 760-564-241
4
1-800-831-4881 Email: sales@mdesemiconductor.com Web: www.mdesemiconductor.com
RATING AND CHARACTERISTIC CURVES 5.0SMLJ SERIES
t - Time(ms)
3.0 4.0
150
0
1.0 2.0
tr = 10μsec.
Peak Value
IPPM
TJ= 25°C
Pulse Width(td)is defined
as the point where the
peak current decays to
50% of IPPM
10/1000μsec.Waveform
as defined by R.E.A.
td
Fig.3 - Pulse Waveform
4.0
50
Half Value- IPPM
2
100
IPPM - Peak Pulse Current,% IRSM
3.0
0
0.1
1
10
100
1000
100ns 1µs 10µs 100µs
td- Pulse Width (sec.)
Fig. 1 - Peak Pulse Power Rating Curve
PPPM-Peak Pulse Power s. Pulse Time - KW
Non-repetitive Pulse
1
100
10000
1000000
1 10 100 1000
CJ- Capacitance (pF)
Fig. 4 - Typica l Junction Capacit ance
VWM - Reverse Stand-Off
Uni-directional V=OV
PM(AV),Steady State Power
Dissipation (W)
0
0.5
1
1.5
2
2.5
3
3.5
4
4.5
5
5.5
6
6.5
0 255075100125150175
Fi g. 5 - Steady State Power
Derating Curve
TL- Lead Temperature (°C)
60Hz
Resistive or
Inductive Load
50
100
150
200
250
300
350
1 10 100
Number of C
y
cles at 60 H
z
Fig.6 - Maximum Non-Repetitive Forward
Surge Current Uni-Directional Onl y
8.3ms Single Half Sine-Wave
(JEDEC Method)TJ=TJmax.
IFSM-Peak Forward Surge
0
12.5
25
37.5
50
62.5
75
87.5
100
0 25 50 75 100 125 150 175 200
Fig.2 - Pulse Derating Curve
Peak Pulse Power (PPP)
or Current (IPP)
Derating in
Percentage,%
TA- Ambient Temperature (°C)
Bi-directional V=OV
Uni-directional @V
R
Bi-directional @V
R
5/1/2012
5000 Watt Surface Mount TVS
UNI BI
5.0SMLJ12A 5.0SMLJ12CA 5PEP 5BEP 12.00 13.30 14.70 10 19.9 252.0 800
5.0SMLJ13A 5.0SMLJ13CA 5PEQ 5BEQ 13.00 14.40 15.90 10 21.5 233.0 500
5.0SMLJ14A 5.0SMLJ14CA 5PFR 5BFR 14.00 15.60 17.20 10 23.2 216.0 200
5.0SMLJ15A 5.0SMLJ15CA 5PES 5BES 15.00 16.70 18.50 1 24.4 205.0 100
5.0SMLJ16A 5.0SMLJ16CA 5PET 5BET 16.00 17.80 19.70 1 26.0 193.0 50
5.0SMLJ17A 5.0SMLJ17CA 5PEU 5BEU 17.00 18.90 20.90 1 27.6 181.0 20
5.0SMLJ18A 5.0SMLJ18CA 5PFV 5BFV 18.00 20.00 22.10 1 29.2 172.0 10
5.0SMLJ20A 5.0SMLJ20CA 5PEW 5BEW 20.00 22.20 24.50 1 32.4 155.0 5
5.0SMLJ22A 5.0SMLJ22CA 5PEX 5BEX 22.00 24.40 26.90 1 35.5 141.0 5
5.0SMLJ24A 5.0SMLJ24CA 5PEZ 5BEZ 24.00 26.70 29.50 1 38.9 129.0 5
5.0SMLJ26A 5.0SMLJ26CA 5PFE 5BFE 26.00 28.90 31.90 1 42.1 119.0 5
5.0SMLJ28A 5.0SMLJ28CA 5PFG 5BFG 28.00 31.10 34.40 1 45.4 110.0 5
5.0SMLJ30A 5.0SMLJ30CA 5PFK 5BFK 30.00 33.30 36.80 1 48.4 103.0 5
5.0SMLJ33A 5.0SMLJ33CA 5PFM 5BFM 33.00 36.70 40.60 1 53.3 93.9 5
5.0SMLJ36A 5.0SMLJ36CA 5PFP 5BFP 36.00 40.00 44.20 1 58.1 86.1 5
5.0SMLJ40A 5.0SMLJ40CA 5PFR 5BFR 40.00 44.40 49.10 1 64.5 77.6 5
5.0SMLJ43A 5.0SMLJ43CA 5PFT 5BFT 43.00 47.80 52.80 1 69.4 72.1 5
5.0SMLJ45A 5.0SMLJ45CA 5PFV 5BFV 45.00 50.00 55.30 1 72.7 68.8 5
5.0SMLJ48A 5PFX 48.00 53.30 58.90 1 77.4 64.7 5
5.0SMLJ51A 5PFZ 51.00 56.70 62.70 1 82.4 60.7 5
5.0SMLJ54A 5PGE 54.00 60.00 66.30 1 87.1 57.5 5
5.0SMLJ58A 5PGG 58.00 64.40 71.20 1 93.6 53.5 5
5.0SMLJ60A 5PGK 60.00 66.70 73.70 1 96.8 51.7 5
5.0SMLJ64A 5PGM 64.00 71.10 78.60 1 103.0 48.6 5
5.0SMLJ70A 5PGP 70.00 77.80 86.00 1 113.0 44.3 5
5.0SMLJ75A 5PGR 75.00 83.30 92.10 1 121.0 41.4 5
5.0SMLJ78A 5PGT 78.00 86.70 95.80 1 126.0 39.7 5
5.0SMLJ85A 5PGV 85.00 94.40 104.00 1 137.0 36.5 5
5.0SMLJ90A 5PGX 90.00 100.00 111.00 1 146.0 34.3 5
5.0SMLJ100A 5PGZ 100.00 111.00 123.00 1 162.0 30.9 5
5.0SMLJ110A 5PHE 110.00 122.00 135.00 1 177.0 28.3 5
5.0SMLJ120A 5PHG 120.00 133.00 147.00 1 193.0 26.0 5
5.0SMLJ130A 5PHK 130.00 144.00 159.00 1 209.0 24.0 5
5.0SMLJ150A 5PHM 150.00 167.00 185.00 1 243.0 20.6 5
5.0SMLJ160A 5PHP 160.00 178.00 197.00 1 259.0 19.3 5
5.0SMLJ170A 5PHR 170.00 189.00 209.00 1 275.0 18.2 5
For bidirectional type having Vrwm of 20 volts and less, the IR limit is double.
For parts without A , the VBR is ± 10
%
Certified RoHS Compliant
UL File # E223026
MDE Semiconductor, Inc.
78-150 Calle Tampico, Unit 210, La Quinta, CA., USA 92253 Tel : 760-564-8656 • Fax : 760-564-2414
1-800-831-4881 Email: sales@mdesemiconductor.com Web: www.mdesemiconductor.com
UNI-POLAR BI-POLAR
DEVICE
MARKING
CODE
REVERSE
STANDOFF
VOLTAGE
VRWM (V)
PEAK
PULSE
CURRENT
IPP (A)
REVERSE
LEAKAGE
@ VRWM
IR (µA)
BREAKDOWN
VOLTAGE
VBR (V)
MIN. @ IT
BREAKDOWN
VOLTAGE
VBR (V)
MAX. @ IT
TEST
CURRENT
(IT)
mA
MAXIMUM
CLAMPING
VOLTAGE
@IPP VC (V)
