EMI Filters EMI Filters Type: EXCEMT Features Recommended Applications Small in size and taped type is available Excellent noise filtering characteristics using Digital equipment Personal Computers,Word Processors, Printers, HDD, PPC, and Communication equipment Digital audio and Video equipment AC adapters and Switching Power supplies Engine controls, Panels and Audio systems Electronic musical instruments and other digital devices T-network connections. ] Preformed leads provide better solderability for through-hole P.W.B. Explanation of Part Numbers 1 2 3 4 5 6 7 8 9 10 11 E X C E M T 1 0 3 D C Product Code Noise Filter Series EMT T-circuit EMI Filter Construction Nominal Capacitance Temperature Value Characteristics The first two digits are significant figures of capacitance value and the third one denotes the number of zeroes following Code Tolerance B D Suffix for Packing Code Packing C Bulk Packing T Taped & Box 10 % +20 % 30 % Schematic Exterior resin Ferrite bead Ferrite bead Capacitor Lead Cylindrical capacitor Rev.02/04 Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. Whenever a doubt about safety arises from this product, please inform us immediately for technical consultation without fail. EMI Filters Ratings Category Temperature Range (Operating Temp. Range): 25 C to +85 C (3) Part Number Rated Voltage (V DC) EXCEMT220B1 EXCEMT470B1 EXCEMT101B1 EXCEMT221B1 EXCEMT271B1 EXCEMT471B1 EXCEMT102B1 EXCEMT222D1 EXCEMT332D1 EXCEMT103D1 50 50 50 50 50 50 50 16 16 16 (3) (2) Rated 25 dB Attenuation 15 dB Attenuation Capacitance Tolerance Temperature Current Frequency Frequency (%) (pF) Characteristics (A DC) (MHz) (MHz) (1) 20 20 20 20 20 20 20 20 20 30 22 47 100 220 270 470 1000 2200 3300 10000 YB YB YB YB YB YB YB YD YD YD 5 5 5 5 5 5 5 5 5 5 800 450 350 250 250 150 100 50 40 25 to to to to to to to to to to 600 400 250 150 150 70 50 30 25 15 1000 700 550 400 400 350 250 200 160 120 to to to to to to to to to to 1000 1000 900 500 500 500 400 400 400 400 Lead Cut Type: C, Taped Type: T (1) Measurement Tepmerature: +20 C, Measurement Frequency: 1 kHz (2) Temperature Characteristics YB: Maximum capacitance change is 10 % over the temperature range of -25 C to +85 C in reference to +20 C YD: Maximum capacitance change is +20, -30 % over the temperature range of -25 C to +85 C in reference to +20 C (3) Measurement Temperature: +20 C Note: Please inquire to the particular capacitance value, on a range of 22 to 10000 pF. Dimensions in mm (not to scale) Standard Lead Taping in mm (not to scale) 2.50.5 2.50.5 3.850.50 Center lead only f 0.450.05 12.70.2 5.00.5 Typical Attenuation Characteristics Attenuation (dB) 0 Measurement Circuit 20 50 W 40 Sample 471 102 60 103 80 1M 5M 10 M 19.01.0 7 max. 471 471 f 0.500.05 50 M 332 222 100 M 220 470 101 221 271 500 M ~ 50 W 1G Frequency (Hz) Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. Whenever a doubt about safety arises from this product, please inform us immediately for technical consultation without fail. f4.00.2 18.00.5 4.51.0 Capacitance 9.51.0 471 7 max. 11 max. 2.5 max. 471 2.5 max. 6.5 max. EMI Filters Packaging Specifications Part Number Standard Quantity Style Weight (mg/pcs.) EXCEMT1111C 200 pcs./Bag Bulk 216 EXCEMT1111T 2000 pcs./Box Flat box 291 Safety Precautions The filter may fail in a short-circuit mode (or open-circuit mode) when subjected to severe conditions of electrical and/or environmental stresses beyond their specified rating. Burnout or glowing may result in the worst case. Soldering Flux: Use rosin type or nonhalogen type flux. Cleaning Solvent: Use alcohol based solution. Consult with us before using any other type of cleaning agent. Avoid contact with static electricity. Filter characteristics may deteriorate if subjected to surge or other abnormal voltage. Excessive mechanical stress may damage the components. Handle with care. Store under temperatures ranging from 5 C to +40 C and relative humidity from 40 % to 60 %. Avoid rapid changes of temperature and humidity. Use the components within one year of delivery. Before ordering, test sample components in your application to ensure proper function and compatibility. Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. Whenever a doubt about safety arises from this product, please inform us immediately for technical consultation without fail.