Ceramic Capacitors Middle and High Voltage Features: * * High voltage in a given case size High stability and reliability Applications: * * * * Snubbers in high frequency power converters High voltage coupling / DC blocking DC-DC converters Back-lighting inverters External Dimensions Size Inch (mm) L (mm) W (mm) 0603 (1608) 1.6 0.1 0.8 0.1 0805 (2012) 1206 (3216) 2 0.15 3.2 0.15 1.25 0.1 1.6 0.15 3.2 0.2 1.6 0.2 3.2 0.3 2.5 0.2 1210 (3225) 3.2 0.4 1812 (4532) 4.5 + 0.5 / -0.3 2.5 0.3 3.2 0.3 T (mm) / Symbol Remarks MB (mm) 0.4 0.15 0.8 0.07 S 0.6 0.1 A 0.8 0.1 B - 1.25 0.1 D # 0.8 0.1 B 0.95 0.1 C - 1.25 0.1 D # 1.6 0.2 G # 0.95 0.1 C # 1.25 0.1 D # 1.6 0.2 G # 2.5 0.3 M # 1.25 0.1 D # 1.6 0.2 G # 2 0.2 K # 0.5 0.2 0.6 0.2 0.75 0.25 0.5 0.25 # Reflow soldering only is recommended Constructions No. Name 1 Ceramic material 2 Inner electrode 3 4 NP0, X7R* Inner layer Termination 5 NP0, X7R BaTiO3 based AgPd alloy Ni Ag Cu Middle layer Ni Outer layer Sn * Partial NP0;X7R items are with Ag/Ni/Sn terminations, please refer to product range of NP0;X7R dielectric for detail www.element14.com www.farnell.com www.newark.com Page <1> 20/02/12 V1.1 Ceramic Capacitors Middle and High Voltage General Electrical Data Dielectric NP0 Size X7R 0603, 0805, 1206, 1210, 1812 Capacitance* Capacitance tolerance*** 0.5 pF to 6,800 pF 100 pF to 1 F Cap 5 pF : C (0.25 pF) Cap 10 pF : J (5%), K (10%) K (10%) Rated voltage (WVDC) 200 V to 3 kV Cap <30 pF : Q 400 +20 C Cap 30 pF : Q 1,000 Q* 2.5% Ur = 200 to 630 V : 10 G or R x C 100 -F whichever is smaller Ur = 1,000 to 3,000 V : 10 G Insulation resistance at Ur** 200 to 300 V : 2 x WVDC 500 to 999 V : 1.5 x WVDC 1,000 to 3,000 V : 1.2 x WVDC Dielectric strength Operating temperature -55 to +125C Capacitance characteristic 30 ppm 15% Termination Ni/Sn (lead-free termination) * Measured at the condition of 30 to 70% related humidity NP0 : Apply 1 0.2 Vrms, 1 MHz 10% for Cap 1,000 pF and 1 0.2 Vrms, 1 KHz 10% for Cap >1,000 pF, 25C at ambient temperature X7R : Apply 1 0.2 Vrms, 1 KHz 10%, at 20C ambient temperature ** Measured at 500 V dc for 60 seconds for Ur >500 V dc *** Preconditioning for Class II MLCC : Perform a heat treatment at 150 10C for 1 hour, then leave in ambient condition for 24 2 hours before measurement Capacitance Range (Middle Voltage - 200 V to 630 V) NP0 Dielectric Dielectric Capacitance Size NP0 0603 0805 1206 1210 1812 Rated Voltage (V dc) 200 250 200 250 500 630 200 250 500 630 200 250 500 630 200 250 500 630 0.5 pF (0R5) S S A A A A - - - - - - - - - - - - 1 pF (1R0) S S A A A A - - - - - - - - - - - - 1.2 pF (1R2) S S A A A A - - - - - - - - - - - - 1.5 pF (1R5) S S A A A A B B B B - - - - - - - - 1.8 pF (1R8) S S A A A A B B B B - - - - - - - - 2.2 pF (2R2) S S A A A A B B B B - - - - - - - - 2.7 pF (2R7) S S A A A A B B B B - - - - - - - - 3.3 pF (3R3) S S A A A A B B B B - - - - - - - - www.element14.com www.farnell.com www.newark.com Page <2> 20/03/12 V1.1 Ceramic Capacitors Middle and High Voltage Dielectric NP0 Capacitance Size 603 0805 1206 1210 1812 Rated Voltage (V dc) 200 250 200 250 500 630 200 250 500 630 200 250 500 630 200 250 500 630 3.9 pF (3R9) S S A A A A B B B B 4.7 pF (4R7) S S A A A A B B B B 5.6 pF (5R6) S S A A A A B B B B 6.8 pF (6R8) S S A A A A B B B B 8.2 pF (8R2) S S A A A A B B B B - - - - - - - - 10 pF (100) S S A A A A B B B B C C C C D D D D 12 pF (120) S S A A A A B B B B C C C C D D D D 15 pF (150) S S A A A A B B B B C C C C D D D D 18 pF (180) S S A A A A B B B B C C C C D D D D 22 pF (220) S S A A A A B B B B C C C C D D D D 27 pF (270) S S A A A A B B B B C C C C D D D D 33 pF (330) S S A A A A B B B B C C C C D D D D 39 pF (390) S S A A A A B B B B C C C C D D D D 47 pF (470) S S A A A A B B B B C C C C D D D D 56 pF (560) S S A A A A B B B B C C C C D D D D 68 pF (680) S S A A A A B B B B C C C C D D D D 82 pF (820) S S A A B B B B B B C C C C D D D D 100 pF (101) S S A B B B B B B B C C C C D D D D 120 pF (121) S S A B D D B B B B C C C C D D D D 150 pF (151) S S B D D D B B B B C C C C D D D D 180 pF (181) S S B D D D B B B B C C C C D D D D 220 pF (221) S S D D D D B B B B C C C C D D D D 270 pF (271) X X D D D D B C C C C C C C D D D D 330 pF (331) X X D D D D B C C C C C C C D D D D 390 pF (391) X X D D D D B C C C C C C C D D D D 470 pF (471) X X D D C C C C C C C D D D D - - D D C D D D C C C C D D D D D D C D D D C C C C D D D D D D - C 560 pF (561) - C G G G C C C C D D D D C G G G D D D D D D D D 680 pF (681) 820 pF (821) 1,000 pF (102) D www.element14.com www.farnell.com www.newark.com Page <3> 20/03/12 V1.1 Ceramic Capacitors Middle and High Voltage Capacitance Range (Middle Voltage - 200 V to 630 V) NP0 Dielectric Dielectric NP0 Capacitance Size 0603 0805 1206 1210 1812 Rated Voltage (V dc) 200 250 200 250 500 630 200 250 500 630 200 250 500 630 200 250 500 630 1,200 pF (122) - - - - - - C G G G D D D D D D D D 1,500 pF (152) - - - - - - D G G G D D D D D D D D 1,800 pF (182) - - - - - - D G G G D D D D D D D D 2,200 pF (222) - - - - - - D G G G D D - - D D D D 2,700 pF (272) - - - - - - - - - - D D - - D D D D 3,300 pF (332) - - - - - - - - - - D D - - D D D D 3,900 pF (392) - - - - - - - - - - D D - - D - - - 4,700 pF (472) - - - - - - - - - - - - - - D - - - 5,600 pF (562) - - - - - - - - - - - - - - D - - - 6,800 pF (682) - - - - - - - - - - - - - - D - - - The letter in cell is expressed the symbol of product thickness X7R Dielectric Dielectric X7R Capacitance Size 0805 1206 1210 1812 Rated Voltage (V dc) 200 250 500 630 200 250 500 630 200 250 500 630 200 250 500 630 100 pF (101) B B B B 120 pF (121) B B B B - - - - 150 pF (151) B B B B D D D D 180 pF (181) B B B B D D D D 220 pF (221) B B B B D D D D 270 pF (271) B B B B D D D D 330 pF (331) B B B B D D D D 390 pF (391) B B B B D D D D 470 pF (471) B B B B D D D D 560 pF (561) B B B B D D D D 680 pF (681) B B B B D D D D - - - - - - - 820 pF (821) B B B B D D D D - 1,000 pF (102) B B B B D D D D C C D D D D D D 1,200 pF (122) B B B B D D D D C C D D D D D D 1,500 pF (152) B B B B D D D D C C D D D D D D www.element14.com www.farnell.com www.newark.com Page <4> 20/02/12 V1.1 Ceramic Capacitors Middle and High Voltage X7R Dielectric Dielectric X7R Capacitance Size 0805 1206 1210 1812 Rated Voltage (V dc) 200 250 500 630 200 250 500 630 200 250 500 630 200 250 500 630 1,800 pF (182) B B B B D D D D C C D D D D D D 2,200 pF (222) B B B B D D D D C C D D D D D D 2,700 pF (272) B B B B D D D D C C D D D D D D 3,300 pF (332) B B B B D D D D C C D D D D D D 3,900 pF (392) B B B B D D D D C C D D D D D D 4,700 pF (472) B B D D D D D D C C D D D D D D 5,600 pF (562) D D D D D D D D C C D D D D D D 6,800 pF (682) D D D D D D D D C C D D D D D D 8,200 pF (822) D D D D D D D D C C D D D D D D 0.010 F (103) D D D D D D D D C C D D D D D D 0.012 F (123) D D D D D C C D D D D D D D D D D D D C C D D D D D D 0.018 F (183) D D D D D D C C D D D D D D 0.022 F (223) D D D D G G C C D D D D D D 0.027 F (273) - - - D 0.015 F (153) - D D G G C C G G D D D D G G G G C C G G D D D D G G G G D D D D D D G G D D D D G G D D G G D D K K G G G G K K G G D D K K G G G G D D K K - - G G D D M M K K M M K K M M K K M M K K M M K K M M K K M M K K - - - D G - D G - C G - C G M M M M M M M M - - 0.033 F (333) 0.039 F (393) 0.047 F (473) 0.056 F (563) 0.068 F (683) 0.082 F (823) 0.1 F (104) 0.12 F (124) 0.15 F (154) 0.18 F (184) 0.22 F (224) 0.27 F (274) 0.33 F (334) 0.39 F (394) 0.47 F (474) 0.56 F (564) 0.68 F (684) 0.84 F (844) 1 F (105) The letter in cell is expressed the symbol of product thickness www.element14.com www.farnell.com www.newark.com Page <5> 20/03/12 V1.1 Ceramic Capacitors Middle and High Voltage Capacitance Range (High Voltage - 1 kV to 3 kV) NP0 Dielectric Dielectric NP0 Capacitance Size 1206 1210 1812 Rated Voltage (V dc) 1,000 2,000 1,000 2,000 1,000 2,000 3,000 1.5 pF (1R5) B B - - - - - 1.8 pF (1R8) B B - - - - - 2 pF (2R0) B B - - - - - 2.2 pF (2R2) B B - - - - - 2.7 pF (2R7) B B - - - - - 3.3 pF (3R3) B B - - - - - 3.9 pF (3R9) B B - - - - - 4.7 pF (4R7) B B - - - - - 5.6 pF (5R6) B B - - - - - 6.8 pF (6R8) B B - - - - - 8.2 pF (8R2) B B - - - - - 10 pF (100) B B C C D D D 12 pF (120) B B C C D D D 15 pF (150) B B C C D D D 18 pF (180) B B C C D D D 22 pF (220) B B C C D D D 27 pF (270) B B C C D D D 33 pF (330) B C C C D D D 39 pF (390) B C C C D D D 47 pF (470) C C C C D D D 56 pF (560) C D C D D D D 68 pF (680) C D C D D D D 82 pF (820) D D C D D D D 100 pF (101) D D D D D D D 120 pF (121) D G D D D D D 150 pF (151) D G D G D D D 180 pF (181) G G D G D D K 220 pF (221) G G G G D D K 270 pF (271) G - G - D K K 330 pF (331) G - G - D K K 390 pF (391) G - G - D K K 470 pF (471) G - G - K K K 560 pF (561) - - - - K K - www.element14.com www.farnell.com www.newark.com Page <6> 20/03/12 V1.1 Ceramic Capacitors Middle and High Voltage Capacitance Range (High Voltage - 1 kV to 3 kV) NP0 Dielectric Dielectric NP0 Capacitance Size 1206 1210 1812 Rated Voltage (V dc) 1,000 2,000 1,000 2,000 1,000 2,000 3,000 680 pF (681) - - - - K K - 820 pF (821) - - - - K K - 1,000 pF (102) - - - - K K - 1,200 pF (122) - - - - K - - 1,500 pF (152) - - - - K - - The letter in cell is expressed the symbol of product thickness X7R Dielectric Dielectric X7R Capacitance Size 1206 1210 1812 Rated Voltage (V dc) 1,000 2,000 1,000 1,000 2,000 3,000 150 pF (151) D D - - - - 180 pF (181) D D - - - - 220 pF (221) D D - - - - 270 pF (271) D D - D D - 330 pF (331) D D - D D - 390 pF (391) D D - D D - 470 pF (471) D D - D D - 560 pF (561) D D - D D - 680 pF (681) D D - D D K 820 pF (821) D G - D D K 1,000 pF (102) D G D D D K 1,200 pF (122) D G D D D - 1,500 pF (152) D G D D D - 1,800 pF (182) D G D D G - 2,200 pF (222) D - D D G - 2,700 pF (272) D - D D G - 3,300 pF (332) D - D D K - 3,900 pF (392) D - G D K - 4,700 pF (472) D - G D K - 5,600 pF (562) D - G D - - 6,800 pF (682) D - G D - - 8,200 pF (822) D - G D - - www.element14.com www.farnell.com www.newark.com Page <7> 20/03/12 V1.1 Ceramic Capacitors Middle and High Voltage X7R Dielectric Dielectric X7R Capacitance Size 1206 1210 1812 Rated Voltage (V dc) 1,000 2,000 1,000 1,000 2,000 3,000 0.01 F (103) D - G D - - 0.012 F (123) - - - K - - 0.015 F (153) - - - K - - The letter in cell is expressed the symbol of product thickness The letter in cell with "^" mark is expressed product with Ag/Ni/Sn terminations Packaging Dimension and Quantity Size 0603 0805 1206 1210 1812 Thickness/Symbol Paper Tape Plastic Tape 7" Reel 13" Reel 7" Reel 13" Reel 0.8 0.07 S 4k 15 k - - 0.6 0.1 A 4k 15 k - - 0.8 0.1 B 4k 15 k - - 1.25 0.1 D - - 3k 10 k 0.8 0.1 B 4k 15 k - - 0.95 0.1 C - - 3k 10 k 1.25 0.1 D - - 3k 10 k 1.6 0.2 G - - 2k 10 k 0.95 0.1 C - - 3k 10 k 1.25 0.1 D - - 3k 10 k 1.6 0.2 G - - 2k - 2.5 0.3 M - - 1k 6k 1.25 0.1 D - - 1k - 1.6 0.2 G - - 1k - 2 0.2 K - - 1k Unit : Pieces www.element14.com www.farnell.com www.newark.com Page <8> 20/03/12 V1.1 Ceramic Capacitors Middle and High Voltage Reliability Test Conditions and Requirements Item Test Condition Visual and Mechanical Capacitance Q / D.F. (Dissipation Factor) Dielectric Strength Insulation Resistance Requirements No remarkable defect Dimensions to conform to individual specification sheet --Class I : (NP0) Cap 1,000 pF, 1 0.2 Vrms, 1 MHz 10% Cap >1,000 pF, 1 0.2 Vrms, 1 KHz 10% Class II : (X7R) 1 0.2 Vrms, 1 KHz 10% To apply voltage : 200 V to 300 V 500 V to 999 V 1,000 V to 3,000 V Cut-off, set at 10 mA TEST = 15 s RAMP = 0 2 times V dc 1.5 times V dc 1.2 times V dc Rated voltage : 200 to 630 V Rated voltage : 630 V To apply rated voltage (500 V max.) for 60 s To apply 500 V for 60 s Shall not exceed the limits given in the detailed specifications NP0 : Cap 30 pF, Q 1,000; Cap <30 pF, Q 400 +20 C X7R : 2.5% No evidence of damage or flash over during test 10 G or R x C 100 -F whichever is smaller 10 G With no electrical load Temperature Coefficient T.C. Operating Temperature T.C. Capacitance Change NP0 -55 to 125C at 25C NP0 Within 30 ppm / C X7R -55 to 125C at 25C X7R Within 15% Adhesive Strength of Termination Pressurizing force : 5 N (0603) and 10 N (>0603) Test time : 10 1 s No remarkable damage or removal of the terminations Vibration Resistance Vibration frequency : 10 to 55 Hz / min. Total amplitude : 1.5 mm Test time : 6 hrs (Two hours each in three mutually perpendicular directions) No remarkable damage Cap change and Q / D.F.: To meet initial specification Solderability Solder temperature : 235 5C Dipping time : 2 0.5 s Bending Test 95% minimum coverage of all metalized area The middle part of substrate shall be pressurized by means of the pressurizing rod at a rate of about 1 mm per second until the deflection becomes 1 mm and then the pressure shall be maintained for 5 1 s Measurement to be made after keeping at room temperature for 24 2 hrs No remarkable damage Cap change : NP0 : Within 5% or 0.5 pF whichever is larger X7R : Within 12.5% (This capacitance change means the change of capacitance under specified flexure of substrate from the capacitance measured before the test) www.element14.com www.farnell.com www.newark.com Page <9> 20/03/12 V1.1 Ceramic Capacitors Middle and High Voltage Item Resistance to Soldering Heat Temperature Cycle Test Condition Requirements Solder temperature : 260 5C Dipping time : 10 1 s Preheating : 120 to 150C for 1 minute before immerse the capacitor in a eutectic solder Before initial measurement (Class II only) : Perform 150 + 0 / -10C for 1 hour and then set for 48 4 hours at room temperature Measurement to be made after keeping at room temperature for 24 2 hours (Class I) or 48 4 hours (Class II) Conduct the five cycles according to the temperatures and time Step Temperature (C) Time (Min.) 1 Minimum operating temperature +0 / -3 30 3 2 Room temperature 2 to 3 3 Maximum operating temperature +3 / -0 30 3 4 Room temperature No remarkable damage Cap change : NP0 : Within 2.5% or 0.25 pF whichever is larger X7R : Within 7.5% Q / D.F., I.R. and dielectric strength : To meet initial requirements 25% maximum leaching on each edge No remarkable damage Cap change : NP0 : Within 2.5% or 0.25 pF whichever is larger X7R : Within 7.5% Q / D.F., I.R. and dielectric strength : To meet initial requirements 2 to 3 Before initial measurement (Class II only) : Perform 150+0 / -10C for 1 hour and then set for 48 4 hours at room temperature Measurement to be made after keeping at room temperature for 24 2 hours (Class I) or 48 4 hours (Class II) Humidity (Damp Heat) Steady State Humidity (Damp Heat) Load Test temperature : 40 2C Humidity : 90 to 95% RH Test time : 500 +24 / -0 hrs Measurement to be made after keeping at room temperature for 24 2 hours (Class I) or 48 4 hours (Class II) Test temperature Humidity Test time To apply voltage : : : : 40 2C 90 to 95% RH 500 +24 / -0 hrs Frated voltage (Maximum 500 V) Measurement to be made after keeping at room temperature for 24 2 hours (Class I) or 48 4 hours (Class II) No remarkable damage Cap change : NP0 : within 5% or 0.5 pF whichever is larger X7R : within 12.5% Q / D.F. value : NP0 : Cap 30 pF, Q 350; 10 pF Cap <30 pF, Q 275 + 2.5 C Cap <10 pF; Q 200 + 10 C X7R : 3% I.R. : 1 G or R x C 50 -F whichever is smaller No remarkable damage Cap change : NP0 : within 7.5% or 0.75 pF whichever is larger X7R : within 12.5% Q / D.F. value : NP0 : Cap 30 pF, Q 200; Cap <30 pF, Q 100 + 10 / 3 C X7R : 3% I.R. : 500 M or R x C 25 -F whichever is smaller www.element14.com www.farnell.com www.newark.com Page <10> 20/03/12 V1.1 Ceramic Capacitors Middle and High Voltage Item Test Condition Requirements High Temperature Load (Endurance) Test temperature : NP0, X7R : 125 3C To apply voltage : (1) <500 V : 200% of rated voltage (2) 500 V : 150% of rated voltage (3) 630 V : 120% of rated voltage Test time : 1,000 +24 / -0 hrs Measurement to be made after keeping at room temperature for 24 2 hours (Class I) or 48 4 hours (Class II) No remarkable damage Cap change : NP0 : within 3% or 0.3 pF whichever is larger X7R : within 12.5% Q / D.F. value : NP0 : Cap 30 pF, Q 350 10 pF Cap <30 pF, Q 275 + 2.5 C Cap <10 pF, Q 200 + 10 C X7R : 3% I.R. : 1 G or R x C 50 -F whichever is smaller Appendixes Tape and Reel Dimensions The Dimension of Paper Tape The Dimension of Plastic Tape Size 0603 0805 1206 1210 1812 Thickness S, X B C, D, I B C, D G C, D, G M D, K A0 1.02 0.05 1.5 0.1 <1.57 2 0.1 <1.85 <1.95 <2.97 <2.97 <3.81 B0 1.8 0.05 2.3 0.1 <2.40 3.5 0.1 <3.46 <3.67 <3.73 <3.73 <5.30 T 0.95 0.05 0.95 0.05 0.23 0.05 0.95 0.05 0.23 0.05 0.23 0.05 0.23 0.05 0.230.05 0.250.05 K0 - - <2.5 - <2.5 <2.5 <2.5 <3 <2.5 W 8 0.1 8 0.1 8 0.1 8 0.1 8 0.1 8 0.1 8 0.1 8 0.1 12 0.2 P0 4 0.1 4 0.1 4 0.1 4 0.1 4 0.1 4 0.1 4 0.1 4 0.1 4 0.1 10 x P0 40 0.1 40 0.1 40 0.1 40 0.1 40 0.1 40 0.1 40 0.1 40 0.1 40 0.1 P1 4 0.1 4 0.1 4 0.1 4 0.1 4 0.1 4 0.1 4 0.1 4 0.1 8 0.1 P2 2 0.05 2 0.05 2 0.05 2 0.05 2 0.05 2 0.05 2 0.05 2 0.05 2 0.05 D0 1.55 0.05 1.55 0.05 1.5 0.05 1.5 0.05 1.5 0.05 1.5 0.05 1.5 0.05 1.5 0.05 1.5 0.05 D1 - - 1 0.1 - 1 0.1 1 0.1 1 0.1 1 0.1 1.5 0.1 E 1.75 0.05 1.75 0.05 1.75 0.1 1.750.1 1.75 0.1 1.75 0.1 1.75 0.1 1.75 0.1 1.75 0.1 F 3.5 0.05 3.5 0.05 3.5 0.05 3.5 0.05 3.5 0.05 3.5 0.05 3.5 0.05 3.5 0.05 5.5 0.05 www.element14.com www.farnell.com www.newark.com Page <11> 20/03/12 V1.1 Ceramic Capacitors Middle and High Voltage Size Reel Size The Dimension of Reel 0603, 0805, 1206, 1210 7 Inches 1812 10 Inches 13 Inches 7 Inches C 13 + 0.5 / -0.2 13 +0.5 / -0.2 13 + 0.5 / -0.2 13 + 0.5 / -0.2 W1 8.4 + 1.5 / -0 8.4 + 1.5 / -0 8.4 + 1.5 / -0 12.4 + 2.0 / -0 A 178 0.1 250 1 330 1 178 0.1 N 60 + 1 / -0 100 1 100 1 60.5 1 Storage and handling conditions 1. To store products at 5 to 40C ambient temperature and 20 to 70%. related humidity conditions 2. The product is recommended to be used within one year after shipment. check solderability in case of shelf life extension is needed Cautions: a. Don't store products in a corrosive environment such as sulfide, chloride gas, or acid. It may cause oxidization of electrode, which easily be resulted in poor soldering b. To store products on the shelf and avoid exposure to moisture c. Don't expose products to excessive shock, vibration, direct sunlight and so on Temperature (C) Recommended Soldering Conditions Recommended reflow soldering profile for SMT process with SnAgCu series solder paste www.element14.com www.farnell.com www.newark.com Page <12> 20/02/12 V1.1 Ceramic Capacitors Middle and High Voltage Temperature (C) Recommended wave soldering profile for SMT process with SnAgCu series solder Part Number Table Description Part Number Middle and High Voltage Ceramic Capacitor MC0603N1R0C201CT Middle and High Voltage Ceramic Capacitor MC0805B101K201CT Middle and High Voltage Ceramic Capacitor MC1206B102K102CT Middle and High Voltage Ceramic Capacitor MC1210B102K102CT Middle and High Voltage Ceramic Capacitor MC1812B102K102CT Part Number Explanation: MC Size-Inch (mm) Dielectric Capacitance Tolerance Rated Voltage Termination Packaging 0603 N 1R0 C 201 C T Size Dielectric Capacitance Tolerance Rated Voltage Termination Packaging : 0603 (1608), 0805 (2012), 1206 (3216), 1210 (3225) and 1812 (4532) : N = NP0, B = X7R : Two significant digits followed by no. of zeros. And R is in place of decimal point 0R5 = 0.5 pF 1R0 = 1 pF, 100 = 10 x 100, 100 = 10 pF : C = 0.25 pF, J = 5%, K = 10% : Two significant digits followed by no. of zeros. and R is in place of decimal point : 201 = 200 V dc, 251 = 250 V dc, 501 = 500 V dc, 631 = 630 V dc, 102 = 1,000 V dc, 202 = 2,000 V dc, and 302 = 3,000 V dc : C = Cu/Ni/Sn (for NP0, X7R dielectric) : L = Ag/Ni/Sn (for partial NP0 items) : T = 7 inches reeled Disclaimer This data sheet and its contents (the "Information") belong to the Premier Farnell Group (the "Group") or are licensed to it. No licence is granted for the use of it other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change without notice and replaces all data sheets previously supplied. The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use made of it. Users of this data sheet should check for themselves the Information and the suitability of the products for their purpose and not make any assumptions based on information included or omitted. Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the Group was aware of the possibility of such loss or damage arising) is excluded. This will not operate to limit or restrict the Group's liability for death or personal injury resulting from its negligence. Multicomp is the registered trademark of the Group. (c) Premier Farnell plc 2012. www.element14.com www.farnell.com www.newark.com Page <13> 20/02/12 V1.1