Ceramic Capacitors
Middle and High Voltage
Page <1> 20/02/12 V1.1
www.element14.com
www.farnell.com
www.newark.com
External Dimensions
Features:
• High voltage in a given case size
• High stability and reliability
Applications:
• Snubbers in high frequency power converters
• High voltage coupling / DC blocking
• DC-DC converters
• Back-lighting inverters
# Reflow soldering only is recommended
Size Inch (mm) L (mm) W (mm) T (mm) / Symbol Remarks MB(mm)
0603 (1608) 1.6 ±0.1 0.8 ±0.1 0.8 ±0.07 S-0.4 ±0.15
0805 (2012) 2 ±0.15 1.25 ±0.1
0.6 ±0.1 A-
0.5 ±0.20.8 ±0.1 B-
1.25 ±0.1 D #
1206 (3216) 3.2 ±0.15 1.6 ±0.15
0.8 ±0.1 B-
0.6 ±0.2
0.95 ±0.1 C-
1.25 ±0.1 D #
3.2 ±0.2 1.6 ±0.2 1.6 ±0.2 G #
1210 (3225)
3.2 ±0.3 2.5 ±0.2 0.95 ±0.1 C #
0.75 ±0.25
1.25 ±0.1 D #
3.2 ±0.4 2.5 ±0.3 1.6 ±0.2 G #
2.5 ±0.3 M #
1812 (4532) 4.5 + 0.5 / -0.3 3.2 ±0.3
1.25 ±0.1 D #
0.5 ±0.25
1.6 ±0.2 G #
2 ±0.2 K #
Constructions No. Name NP0, X7R* NP0, X7R
1Ceramic material BaTiO3based
2Inner electrode AgPd alloy Ni
3
Termination
Inner layer Ag Cu
4Middle layer Ni
5Outer layer Sn
* Partial NP0;X7R items are with Ag/Ni/Sn terminations, please refer to product range of NP0;X7R dielectric for detail
Ceramic Capacitors
Middle and High Voltage
Page <2> 20/03/12 V1.1
www.element14.com
www.farnell.com
www.newark.com
General Electrical Data
Dielectric NP0 X7R
Size 0603, 0805, 1206, 1210, 1812
Capacitance* 0.5 pF to 6,800 pF 100 pF to 1 µF
Capacitance tolerance*** Cap ≤5 pF : C (±0.25 pF)
Cap ≥10 pF : J (±5%), K (±10%) K (±10%)
Rated voltage (WVDC) 200 V to 3 kV
Q* Cap <30 pF : Q ≥400 +20 C
Cap ≥30 pF : Q ≥1,000 ≤2.5%
Insulation resistance at Ur** Ur = 200 to 630 V : ≥10 GΩor R × C ≥100 Ω-F whichever is smaller
Ur = 1,000 to 3,000 V : ≥10 GΩ
Dielectric strength
200 to 300 V : ≥2 × WVDC
500 to 999 V : ≥1.5 × WVDC
1,000 to 3,000 V : ≥1.2 × WVDC
Operating temperature -55 to +125°C
Capacitance characteristic ±30 ppm ±15%
Termination Ni/Sn (lead-free termination)
*Measured at the condition of 30 to 70% related humidity
NP0 : Apply 1 ±0.2 Vrms, 1 MHz ±10% for Cap ≤1,000 pF and 1 ±0.2 Vrms, 1 KHz ±10% for Cap >1,000 pF, 25°C at ambient
temperature
X7R : Apply 1 ±0.2 Vrms, 1 KHz ±10%, at 20°C ambient temperature
** Measured at 500 V dc for 60 seconds for Ur >500 V dc
*** Preconditioning for Class II MLCC : Perform a heat treatment at 150 ±10°C for 1 hour, then leave in ambient condition for
24 ±2 hours before measurement
Capacitance Range (Middle Voltage - 200 V to 630 V)
NP0 Dielectric
Dielectric NP0
Size 0603 0805 1206 1210 1812
Rated Voltage
(V dc) 200 250 200 250 500 630 200 250 500 630 200 250 500 630 200 250 500 630
0.5 pF (0R5) S S A A A A - - - - - - - - - - - -
1 pF (1R0) S S A A A A - - - - - - - - - - - -
1.2 pF (1R2) S S A A A A - - - - - - - - - - - -
1.5 pF (1R5) S S A A A A B B B B - - - - - - - -
1.8 pF (1R8) S S A A A A B B B B - - - - - - - -
2.2 pF (2R2) S S A A A A B B B B - - - - - - - -
2.7 pF (2R7) S S A A A A B B B B - - - - - - - -
3.3 pF (3R3) S S A A A A B B B B - - - - - - - -
Capacitance
Ceramic Capacitors
Middle and High Voltage
Page <3> 20/03/12 V1.1
www.element14.com
www.farnell.com
www.newark.com
Dielectric NP0
Size 603 0805 1206 1210 1812
Rated Voltage
(V dc) 200 250 200 250 500 630 200 250 500 630 200 250 500 630 200 250 500 630
3.9 pF (3R9) SSAAAABBBB--------
4.7 pF (4R7) SSAAAABBBB- - - - - - - -
5.6 pF (5R6) SSAAAABBBB- - - - - - - -
6.8 pF (6R8) SSAAAABBBB- - - - - - - -
8.2 pF (8R2) SSAAAABBBB- - - - - - - -
10 pF (100) S S A A A A B B B B C C C C D D D D
12 pF (120) S S A A A A B B B B C C C C D D D D
15 pF (150) S S A A A A B B B B C C C C D D D D
18 pF (180) S S A A A A B B B B C C C C D D D D
22 pF (220) S S A A A A B B B B C C C C D D D D
27 pF (270) S S A A A A B B B B C C C C D D D D
33 pF (330) S S A A A A B B B B C C C C D D D D
39 pF (390) S S A A A A B B B B C C C C D D D D
47 pF (470) S S A A A A B B B B C C C C D D D D
56 pF (560) S S A A A A B B B B C C C C D D D D
68 pF (680) S S A A A A B B B B C C C C D D D D
82 pF (820) S S A A B B B B B B C C C C D D D D
100 pF (101) S S A B B B B B B B C C C C D D D D
120 pF (121) S S A B D D B B B B C C C C D D D D
150 pF (151) S S B D D D B B B B C C C C D D D D
180 pF (181) S S B D D D B B B B C C C C D D D D
220 pF (221) S S D D D D B B B B C C C C D D D D
270 pF (271) XXDDDDBCCCCCCCDDDD
330 pF (331) XXDDDDBCCCCCCCDDDD
390 pF (391) XXDDDDBCCCCCCCDDDD
470 pF (471) X X D D - - CCCCCCCCDDDD
560 pF (561) - - D D - - CDDDCCCCDDDD
680 pF (681) - - D D - - CDDDCCCCDDDD
820 pF (821) - - D D - - C G G G C C C C D D D D
1,000 pF (102) - - D- - C G G G D D D D D D D D
Capacitance
Ceramic Capacitors
Middle and High Voltage
Page <4> 20/02/12 V1.1
www.element14.com
www.farnell.com
www.newark.com
Capacitance Range (Middle Voltage - 200 V to 630 V)
NP0 Dielectric
Dielectric NP0
Size 0603 0805 1206 1210 1812
Rated Voltage
(V dc) 200 250 200 250 500 630 200 250 500 630 200 250 500 630 200 250 500 630
1,200 pF (122) - - - - - - C G G G D D D D D D D D
1,500 pF (152) - - - - - - D G G G D D D D D D D D
1,800 pF (182) - - - - - - D G G G D D D D D D D D
2,200 pF (222) - - - - - - D G G G D D - - D D D D
2,700 pF (272) - - - - - - - - - - D D - - D D D D
3,300 pF (332) - - - - - - - - - - D D - - D D D D
3,900 pF (392) ----------DD--D---
4,700 pF (472) --------------D---
5,600 pF (562) --------------D---
6,800 pF (682) --------------D---
Capacitance
The letter in cell is expressed the symbol of product thickness
X7R Dielectric
Dielectric X7R
Size 0805 1206 1210 1812
Rated Voltage
(V dc) 200 250 500 630 200 250 500 630 200 250 500 630 200 250 500 630
100 pF (101) B B B B - - - - - - - - - - - -
120 pF (121) B B B B - - - - - - - - - - - -
150 pF (151) B B B B D D D D - - - - - - - -
180 pF (181) B B B B D D D D - - - - - - - -
220 pF (221) B B B B D D D D - - - - - - - -
270 pF (271) B B B B D D D D - - - - - - - -
330 pF (331) B B B B D D D D - - - - - - - -
390 pF (391) B B B B D D D D - - - - - - - -
470 pF (471) B B B B D D D D - - - - - - - -
560 pF (561) B B B B D D D D - - - - - - - -
680 pF (681) B B B B D D D D - - - - - - - -
820 pF (821) B B B B D D D D - - - - - - - -
1,000 pF (102) B B B B D D D D C C D D D D D D
1,200 pF (122) B B B B D D D D C C D D D D D D
1,500 pF (152) B B B B D D D D C C D D D D D D
Capacitance
www.element14.com
www.farnell.com
www.newark.com
Ceramic Capacitors
Middle and High Voltage
Page <5> 20/03/12 V1.1
X7R Dielectric
Dielectric X7R
Size 0805 1206 1210 1812
Rated Voltage
(V dc) 200 250 500 630 200 250 500 630 200 250 500 630 200 250 500 630
1,800 pF (182) B B B B D D D D C C D D D D D D
2,200 pF (222) B B B B D D D D C C D D D D D D
2,700 pF (272) B B B B D D D D C C D D D D D D
3,300 pF (332) B B B B D D D D C C D D D D D D
3,900 pF (392) B B B B D D D D C C D D D D D D
4,700 pF (472) B B D D D D D D C C D D D D D D
5,600 pF (562) DDDDDDDDCCDDDDDD
6,800 pF (682) DDDDDDDDCCDDDDDD
8,200 pF (822) DDDDDDDDCCDDDDDD
0.010 µF (103) DDDDDDDDCCDDDDDD
0.012 µF (123) D D - - DDDDCCDDDDDD
0.015 µF (153) D D - - DDDDCCDDDDDD
0.018 µF (183) D D - - DDDDCCDDDDDD
0.022 µF (223) D D - - D D G G C C D D D D D D
0.027 µF (273) - - - - D D G G C C G G D D D D
0.033 µF (333) - - - - G G G G C C G G D D D D
0.039 µF (393) - - - - G G - - C C G G D D D D
0.047 µF (473) - - - - G G - - D D G G D D D D
0.056 µF (563) - - - - G G - - D D G G D D K K
0.068 µF (683) - - - - G G - - G G - - D D K K
0.082 µF (823) - - - - G G - - G G - - D D K K
0.1 µF (104) - - - - G G - - G G - - D D K K
0.12 µF (124) - - - - - - - - G G - - D D - -
0.15 µF (154) - - - - - - - - M M - - K K - -
0.18 µF (184) - - - - - - - - M M - - K K - -
0.22 µF (224) - - - - - - - - M M - - K K - -
0.27 µF (274) - - - - - - - - M M - - K K - -
0.33 µF (334) - - - - - - - - M M - - K K - -
0.39 µF (394) - - - - - - - - M M - - K K - -
0.47 µF (474) - - - - - - - - M M - - K K - -
0.56 µF (564) ------------M M - -
0.68 µF (684) ------------M M - -
0.84 µF (844) ------------M M - -
1 µF (105) ------------M M - -
Capacitance
The letter in cell is expressed the symbol of product thickness
Ceramic Capacitors
Middle and High Voltage
Page <6> 20/03/12 V1.1
www.element14.com
www.farnell.com
www.newark.com
Capacitance Range (High Voltage - 1 kV to 3 kV)
NP0 Dielectric
Dielectric NP0
Size 1206 1210 1812
Rated Voltage
(V dc) 1,000 2,000 1,000 2,000 1,000 2,000 3,000
1.5 pF (1R5) B B - - - - -
1.8 pF (1R8) B B - - - - -
2 pF (2R0) B B - - - - -
2.2 pF (2R2) B B - - - - -
2.7 pF (2R7) B B - - - - -
3.3 pF (3R3) B B - - - - -
3.9 pF (3R9) B B - - - - -
4.7 pF (4R7) B B - - - - -
5.6 pF (5R6) B B - - - - -
6.8 pF (6R8) B B - - - - -
8.2 pF (8R2) B B - - - - -
10 pF (100) B B C C D D D
12 pF (120) B B C C D D D
15 pF (150) B B C C D D D
18 pF (180) B B C C D D D
22 pF (220) B B C C D D D
27 pF (270) B B C C D D D
33 pF (330) BCCCDDD
39 pF (390) BCCCDDD
47 pF (470) CCCCDDD
56 pF (560) CDCDDDD
68 pF (680) CDCDDDD
82 pF (820) DDCDDDD
100 pF (101) DDDDDDD
120 pF (121) D G D D D D D
150 pF (151) D G D G D D D
180 pF (181) G G D G D D K
220 pF (221) G G G G D D K
270 pF (271) G - G - D K K
330 pF (331) G - G - D K K
390 pF (391) G - G - D K K
470 pF (471) G - G - K K K
560 pF (561) - - - - K K -
Capacitance
Ceramic Capacitors
Middle and High Voltage
Page <7> 20/03/12 V1.1
www.element14.com
www.farnell.com
www.newark.com
Capacitance Range (High Voltage - 1 kV to 3 kV)
NP0 Dielectric
Dielectric NP0
Size 1206 1210 1812
Rated Voltage
(V dc) 1,000 2,000 1,000 2,000 1,000 2,000 3,000
680 pF (681) - - - - K K -
820 pF (821) - - - - K K -
1,000 pF (102) - - - - K K -
1,200 pF (122) ----K--
1,500 pF (152) ----K--
Capacitance
The letter in cell is expressed the symbol of product thickness
X7R Dielectric
Dielectric X7R
Size 1206 1210 1812
Rated Voltage
(V dc) 1,000 2,000 1,000 1,000 2,000 3,000
150 pF (151) D D - - - -
180 pF (181) D D - - - -
220 pF (221) D D - - - -
270 pF (271) D D - D D -
330 pF (331) D D - D D -
390 pF (391) D D - D D -
470 pF (471) D D - D D -
560 pF (561) D D - D D -
680 pF (681) D D - D D K
820 pF (821) D G - D D K
1,000 pF (102) D G D D D K
1,200 pF (122) D G D D D -
1,500 pF (152) D G D D D -
1,800 pF (182) D G D D G -
2,200 pF (222) D - D D G -
2,700 pF (272) D - D D G -
3,300 pF (332) D - D D K -
3,900 pF (392) D - G D K -
4,700 pF (472) D - G D K -
5,600 pF (562) D - G D - -
6,800 pF (682) D - G D - -
8,200 pF (822) D - G D - -
Capacitance
Ceramic Capacitors
Middle and High Voltage
Page <8> 20/03/12 V1.1
www.element14.com
www.farnell.com
www.newark.com
X7R Dielectric
Dielectric X7R
Size 1206 1210 1812
Rated Voltage
(V dc) 1,000 2,000 1,000 1,000 2,000 3,000
0.01 µF (103) D - G D - -
0.012 µF (123) - - - K - -
0.015 µF (153) - - - K - -
Capacitance
The letter in cell is expressed the symbol of product thickness
The letter in cell with “^” mark is expressed product with Ag/Ni/Sn terminations
Packaging Dimension and Quantity
Size Thickness/Symbol
Paper Tape Plastic Tape
7” Reel 13” Reel 7” Reel 13” Reel
0603 0.8 ±0.07 S4 k 15 k - -
0805
0.6 ±0.1 A4 k 15 k - -
0.8 ±0.1 B4 k 15 k - -
1.25 ±0.1 D - - 3 k 10 k
1206
0.8 ±0.1 B4 k 15 k - -
0.95 ±0.1 C - - 3 k 10 k
1.25 ±0.1 D - - 3 k 10 k
1.6 ±0.2 G - - 2 k 10 k
1210
0.95 ±0.1 C - - 3 k 10 k
1.25 ±0.1 D - - 3 k 10 k
1.6 ±0.2 G - - 2 k -
2.5 ±0.3 M - - 1 k 6 k
1812
1.25 ±0.1 D - - 1 k -
1.6 ±0.2 G - - 1 k -
2 ±0.2 K - - 1 k -
Unit : Pieces
www.element14.com
www.farnell.com
www.newark.com
Ceramic Capacitors
Middle and High Voltage
Page <9> 20/03/12 V1.1
Reliability Test Conditions and Requirements
Item Test Condition Requirements
Visual and
Mechanical ---
No remarkable defect
Dimensions to conform to individual specification
sheet
Capacitance Class I : (NP0)
Cap ≤1,000 pF, 1 ±0.2 Vrms, 1 MHz ±10%
Cap >1,000 pF, 1 ±0.2 Vrms, 1 KHz ±10%
Class II : (X7R)
1 ±0.2 Vrms, 1 KHz ±10%
Shall not exceed the limits given in the detailed
specifications
Q / D.F.
(Dissipation
Factor)
NP0 :
Cap ≥30 pF, Q ≥1,000; Cap <30 pF, Q ≥400 +20 C
X7R : ≤2.5%
Dielectric Strength
To apply voltage :
200 V to 300 V ≥2 times V dc
500 V to 999 V ≥1.5 times V dc
1,000 V to 3,000 V ≥1.2 times V dc
Cut-off, set at 10 mA
TEST = 15 s
RAMP = 0
No evidence of damage or flash over during test
Insulation
Resistance
Rated voltage : 200 to 630 V To apply rated voltage
(500 V max.) for 60 s ≥10 GΩor R × C ≥100 Ω-F whichever is smaller
Rated voltage : ≥630 V To apply 500 V for
60 s ≥10 GΩ
Temperature
Coefficient
With no electrical load
Adhesive
Strength of
Termination
Pressurizing force : 5 N (≤0603) and 10 N (>0603)
Test time : 10 ±1 s
No remarkable damage or removal of the
terminations
Vibration
Resistance
Vibration frequency : 10 to 55 Hz / min.
Total amplitude : 1.5 mm
Test time : 6 hrs
(Two hours each in three mutually perpendicular
directions)
No remarkable damage
Cap change and Q / D.F.: To meet initial specification
Solderability Solder temperature : 235 ±5°C
Dipping time : 2 ±0.5 s 95% minimum coverage of all metalized area
Bending Test
The middle part of substrate shall be pressurized by
means of the pressurizing rod at a rate of about 1
mm per second until the deflection becomes 1 mm
and then the pressure shall be maintained for 5 ±1 s
Measurement to be made after keeping at room
temperature for 24 ±2 hrs
No remarkable damage
Cap change :
NP0 : Within ±5% or ±0.5 pF whichever is larger
X7R : Within ±12.5%
(This capacitance change means the change of
capacitance under specified flexure of substrate from
the capacitance measured before the test)
T.C. Operating Temperature
NP0 -55 to 125°C at 25°C
X7R -55 to 125°C at 25°C
T.C. Capacitance Change
NP0 Within ±30 ppm / °C
X7R Within ±15%
Ceramic Capacitors
Middle and High Voltage
Page <10> 20/03/12 V1.1
www.element14.com
www.farnell.com
www.newark.com
Item Test Condition Requirements
Resistance to
Soldering Heat
Solder temperature : 260 ±5°C
Dipping time : 10 ±1 s
Preheating : 120 to 150°C for 1 minute
before immerse the capacitor in a eutectic solder
Before initial measurement (Class II only) : Perform
150 + 0 / -10°C for 1 hour and then set for 48 ±4
hours at room temperature
Measurement to be made after keeping at room
temperature for 24 ±2 hours (Class I) or 48 ±4 hours
(Class II)
No remarkable damage
Cap change :
NP0 : Within ±2.5% or ±0.25 pF whichever is larger
X7R : Within ±7.5%
Q / D.F., I.R. and dielectric strength : To meet initial
requirements
25% maximum leaching on each edge
Temperature
Cycle
Conduct the five cycles according to the
temperatures and time
Before initial measurement (Class II only) : Perform
150+0 / -10°C for 1 hour and then set for 48 ±4 hours
at room temperature
Measurement to be made after keeping at room
temperature for 24 ±2 hours (Class I) or 48 ±4 hours
(Class II)
No remarkable damage
Cap change :
NP0 : Within ±2.5% or ±0.25 pF whichever is larger
X7R : Within ±7.5%
Q / D.F., I.R. and dielectric strength : To meet initial
requirements
Humidity
(Damp Heat)
Steady State
Test temperature : 40 ±2°C
Humidity : 90 to 95% RH
Test time : 500 +24 / -0 hrs
Measurement to be made after keeping at room
temperature for 24 ±2 hours (Class I) or 48 ±4 hours
(Class II)
No remarkable damage
Cap change :
NP0 : within ±5% or ±0.5 pF whichever is larger
X7R : within ±12.5%
Q / D.F. value :
NP0 : Cap ≥30 pF, Q ≥350; 10 pF ≤Cap <30 pF,
Q ≥275 + 2.5 C
Cap <10 pF; Q ≥200 + 10 C
X7R : ≤3%
I.R. : ≥1 GΩor R × C ≥50 Ω-F whichever is smaller
Humidity
(Damp Heat) Load
Test temperature : 40 ±2°C
Humidity : 90 to 95% RH
Test time : 500 +24 / -0 hrs
To apply voltage : Frated voltage
(Maximum 500 V)
Measurement to be made after keeping at room
temperature for 24 ±2 hours (Class I) or 48 ±4 hours
(Class II)
No remarkable damage
Cap change :
NP0 : within ±7.5% or ±0.75 pF whichever is larger
X7R : within ±12.5%
Q / D.F. value :
NP0 : Cap ≥30 pF, Q ≥200; Cap <30 pF,
Q ≥100 + 10 / 3 C
X7R : ≥3%
I.R. : ≥500 MΩor R × C ≥25 Ω-F whichever is
smaller
Step Temperature (°C) Time
(Min.)
1Minimum operating temperature +0 / -3 30 ±3
2Room temperature 2 to 3
3Maximum operating temperature +3 / -0 30 ±3
4Room temperature 2 to 3
Ceramic Capacitors
Middle and High Voltage
Page <11> 20/03/12 V1.1
www.element14.com
www.farnell.com
www.newark.com
Item Test Condition Requirements
High Temperature
Load (Endurance)
Test temperature :
NP0, X7R : 125 ±3°C
To apply voltage :
(1) <500 V : 200% of rated voltage
(2) 500 V : 150% of rated voltage
(3) ≥630 V : 120% of rated voltage
Test time : 1,000 +24 / -0 hrs
Measurement to be made after keeping at room
temperature for 24 ±2 hours (Class I) or 48 ±4
hours (Class II)
No remarkable damage
Cap change :
NP0 : within ±3% or ±0.3 pF whichever is larger
X7R : within ±12.5%
Q / D.F. value :
NP0 : Cap ≥30 pF, Q ≥350
10 pF ≤Cap <30 pF, Q ≥275 + 2.5 C
Cap <10 pF, Q ≥200 + 10 C
X7R : ±3%
I.R. : ≥1 GΩor R × C ≥50 Ω-F whichever is smaller
Appendixes
Tape and Reel Dimensions
The Dimension of Plastic Tape
The Dimension of Paper Tape
Size 0603 0805 1206 1210 1812
Thickness S, X BC, D, I BC, D GC, D, G MD, K
A01.02 ±0.05 1.5 ±0.1 <1.57 2 ±0.1 <1.85 <1.95 <2.97 <2.97 <3.81
B01.8 ±0.05 2.3 ±0.1 <2.40 3.5 ±0.1 <3.46 <3.67 <3.73 <3.73 <5.30
T0.95 ±0.05 0.95 ±0.05 0.23 ±0.05 0.95 ±0.05 0.23 ±0.05 0.23 ±0.05 0.23 ±0.05 0.23±0.05 0.25±0.05
K0- - <2.5 - <2.5 <2.5 <2.5 <3 <2.5
W8 ±0.1 8 ±0.1 8 ±0.1 8 ±0.1 8 ±0.1 8 ±0.1 8 ±0.1 8 ±0.1 12 ±0.2
P04 ±0.1 4 ±0.1 4 ±0.1 4 ±0.1 4 ±0.1 4 ±0.1 4 ±0.1 4 ±0.1 4 ±0.1
10 × P040 ±0.1 40 ±0.1 40 ±0.1 40 ±0.1 40 ±0.1 40 ±0.1 40 ±0.1 40 ±0.1 40 ±0.1
P14 ±0.1 4 ±0.1 4 ±0.1 4 ±0.1 4 ±0.1 4 ±0.1 4 ±0.1 4 ±0.1 8 ±0.1
P22 ±0.05 2 ±0.05 2 ±0.05 2 ±0.05 2 ±0.05 2 ±0.05 2 ±0.05 2 ±0.05 2 ±0.05
D01.55 ±0.05 1.55 ±0.05 1.5 ±0.05 1.5 ±0.05 1.5 ±0.05 1.5 ±0.05 1.5 ±0.05 1.5 ±0.05 1.5 ±0.05
D1- - 1 ±0.1 -1 ±0.1 1 ±0.1 1 ±0.1 1 ±0.1 1.5 ±0.1
E1.75 ±0.05 1.75 ±0.05 1.75 ±0.1 1.75±0.1 1.75 ±0.1 1.75 ±0.1 1.75 ±0.1 1.75 ±0.1 1.75 ±0.1
F3.5 ±0.05 3.5 ±0.05 3.5 ±0.05 3.5 ±0.05 3.5 ±0.05 3.5 ±0.05 3.5 ±0.05 3.5 ±0.05 5.5 ±0.05
Ceramic Capacitors
Middle and High Voltage
Page <12> 20/02/12 V1.1
www.element14.com
www.farnell.com
www.newark.com
The Dimension of Reel
Size 0603, 0805, 1206, 1210 1812
Reel Size 7 Inches 10 Inches 13 Inches 7 Inches
C13 + 0.5 / -0.2 13 +0.5 / -0.2 13 + 0.5 / -0.2 13 + 0.5 / -0.2
W1 8.4 + 1.5 / -0 8.4 + 1.5 / -0 8.4 + 1.5 / -0 12.4 + 2.0 / -0
A178 ±0.1 250 ±1 330 ±1 178 ±0.1
N60 + 1 / -0 100 ±1 100 ±1 60.5 ±1
Storage and handling conditions
1. To store products at 5 to 40°C ambient temperature and 20 to 70%. related humidity conditions
2. The product is recommended to be used within one year after shipment. check solderability in case of shelf life extension is
needed
Cautions:
a. Don’t store products in a corrosive environment such as sulfide, chloride gas, or acid. It may cause oxidization of electrode, which
easily be resulted in poor soldering
b. To store products on the shelf and avoid exposure to moisture
c. Don’t expose products to excessive shock, vibration, direct sunlight and so on
Recommended Soldering Conditions
Recommended reflow soldering profile for SMT process with SnAgCu series solder paste
Temperature (°C)
Disclaimer This data sheet and its contents (the "Information") belong to the Premier Farnell Group (the "Group") or are licensed to it. No licence is granted for the use of it other than for information purposes
in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change without notice and replaces all data sheets previously supplied.
The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use made of it. Users of this data
sheet should check for themselves the Information and the suitability of the products for their purpose and not make any assumptions based on information included or omitted. Liability for loss or damage
resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the Group was aware of the possibility of such loss or damage arising) is excluded.
This will not operate to limit or restrict the Group's liability for death or personal injury resulting from its negligence. Multicomp is the registered trademark of the Group. © Premier Farnell plc 2012.
T
Packaging
C
Termination
201
Rated Voltage
C
Tolerance
1R0
Capacitance
N
Dielectric
0603
Size
MC
Part Number Explanation:
Size-Inch (mm) : 0603 (1608), 0805 (2012), 1206 (3216), 1210 (3225) and 1812 (4532)
Dielectric : N = NP0, B = X7R
Capacitance : Two significant digits followed by no. of zeros. And R is in place of decimal point
0R5 = 0.5 pF 1R0 = 1 pF, 100 = 10 × 100, 100 = 10 pF
Tolerance : C = ±0.25 pF, J = ±5%, K = ±10%
Rated Voltage : Two significant digits followed by no. of zeros. and R is in place of decimal point
:201 = 200 V dc, 251 = 250 V dc, 501 = 500 V dc, 631 = 630 V dc, 102 = 1,000 V dc, 202 = 2,000 V dc,
and 302 = 3,000 V dc
Termination : C = Cu/Ni/Sn (for NP0, X7R dielectric)
:L = Ag/Ni/Sn (for partial NP0 items)
Packaging : T = 7 inches reeled
Ceramic Capacitors
Middle and High Voltage
Page <13> 20/02/12 V1.1
www.element14.com
www.farnell.com
www.newark.com
Part Number Table
Description Part Number
Middle and High Voltage Ceramic Capacitor MC0603N1R0C201CT
Middle and High Voltage Ceramic Capacitor MC0805B101K201CT
Middle and High Voltage Ceramic Capacitor MC1206B102K102CT
Middle and High Voltage Ceramic Capacitor MC1210B102K102CT
Middle and High Voltage Ceramic Capacitor MC1812B102K102CT
Temperature (°C)
Recommended wave soldering profile for SMT process with SnAgCu series solder
