SG PARAMETER SYMBOL TEMP. POWER 1 1 1 1 1 1 1 Quiescent current Input offset voltage Input offset voltage Input offset voltage Input bias current, +IN Input bias current, - IN Input offset current IQ VOS VOS VOS +IB -IB IOS 25C 25C 25C 25C 25C 25C 25C 34V 34V 10V 40V 34V 34V 34V 3 3 3 3 3 3 3 Quiescent current Input offset voltage Input offset voltage Input offset voltage Input bias current, +IN Input bias current, -IN Input offset current IQ VOS VOS VOS +IB -IB IOS -55C -55C -55C -55C -55C -55C -55C 2 2 2 2 2 2 2 Quiescent current Input offset voltage Input offset voltage Input offset voltage Input bias current, +IN Input bias current, -IN Input offset current IQ VOS VOS VOS +IB -IB IOS 4 4 4 4 4 4 4 4 Output voltage, IO =10A Output voltage, IO = 68mA Output voltage, IO = 4A Current limits Stability/noise Slew rate Open loop gain Common-mode rejection 6 6 6 6 6 6 6 5 5 5 5 5 5 5 TEST CONDITIONS MAX UNITS VIN = 0, AV = 100, RCL = .1 VIN = 0, AV = 100 VIN = 0, AV = 100 VIN = 0, AV = 100 VIN = 0 VIN = 0 VIN = 0 10 10 16 11.2 40 40 10 mA mV mV mV nA nA nA 34V 34V 10V 40V 34V 34V 34V VIN = 0, AV = 100, RCL = .1 VIN = 0, AV = 100 VIN = 0, AV = 100 VIN = 0, AV = 100 VIN = 0 VIN = 0 VIN = 0 10 15.2 21.2 16.4 72 72 26 mA mV mV mV nA nA nA 125C 125C 125C 125C 125C 125C 125C 34V 34V 10V 40V 34V 34V 34V VIN = 0, AV = 100, RCL = .1 VIN = 0, AV = 100 VIN = 0, AV = 100 VIN = 0, AV = 100 VIN = 0 VIN = 0 VIN = 0 13 16.5 22.5 17.7 80 80 30 mA mV mV mV nA nA nA VO VO VO ICL EN SR AOL CMR 25C 25C 25C 25C 25C 25C 25C 25C 18V 40V 30V 16V 34V 34V 34V 15V RL = 1 RL = 500 RL = 6 RL = 1, RCL = .1 RL = 500, AV = +1, CL = 1.5nF RL = 500 RL = 500, F = 10Hz RL = 500, F = DC, VCM = 9V Output voltage, IO =10A Output voltage, IO = 68mA Output voltage, IO = 4A Stability/noise Slew rate Open loop gain Common-mode rejection VO VO VO EN SR AOL CMR -55C -55C -55C -55C -55C -55C -55C 18V 40V 30V 34V 34V 34V 15V RL = 1 RL = 500 RL = 6 RL = 500, AV = +1, CL = 1.5nF RL = 500 RL = 500, F = 10Hz RL = 500, F = DC, VCM = 9V Output voltage, IO = 8A Output voltage, IO = 68mA Output voltage, IO = 4A Stability/noise Slew rate Open loop gain Common-mode rejection VO VO VO EN SR AOL CMR 125C 125C 125C 125C 125C 125C 125C 16V 40V 30V 34V 34V 34V 15V RL = 1 RL = 500 RL = 6 RL = 500, AV = +1, CL = 1.5nF RL = 500 RL = 500, F = 10Hz RL = 500, F = DC, VCM = 9V BURN IN CIRCUIT 10 34 24 5 1.0 94 70 7.9 1 10 10 34 24 1.0 94 70 1 10 8 34 24 1.0 94 70 1 10 V V V A mV V/s dB dB V V V mV V/s dB dB V V V mV V/s dB dB * These components are used to stabilize device due to poor high frequency characteristics of burn in board. MIN ** Input signals are calculated to result in internal power dissipation of approximately 2.1W at case temperature = 125C. This data sheet has been carefullyCORPORATION checked and is believed to be reliable, however, no responsibility is assumed for possible* inaccuracies or omissions. All specifications subject to change without notice. APEX MICROTECHNOLOGY * TELEPHONE (520) 690-8600 * FAX (520) 888-3329 ORDERS (520) 690-8601 * EMAILare prodlit@apexmicrotech.com PA51MU REV I JULY 2002 (c) 2002 Apex Microtechnology Corp. 1