10W High Reliable Green Medical On Board Type MEM=10 series cFAk is CB CE till ANSI/AAMI ES60601-1 EN60601-1 IEC60601-1 M@ Features * 1.65"x0.88" compact size * Medical safety approved (2 x MOPP) according to ANSI/AAMI ES60601-1 and IEC/EN60601-1 * Suitable for BF application with appropriate system consideration * No load power consumption<0.075W * Extremely low leakage current * Wide operating temp. range -30 ~ +85C * EMI class B for class II configuration * Protections: Short circuit / Overload / Over voltage / Over temperature * No minimum load required * 3 years warranty H@ Applications * Portable medical device * Mobile clinical workstation * Medical computer monitor * Medical examination instrument MH Description MFM-10 is a 10W high density and small size (42*22.3*20.5mm) AC/DC on board type medical grade power supply series. It features the operation for 80~264VAC, alow no load power consumption less than 0.075W, a high efficiency up to 84%, Class II (no FG) double insulation, outstanding dissipation, 5G anti-vibration, high EMC performance, 4KVAC isolation, etc. The design observes IEC/EN60601-1 and ANSI/AAMI ES60601-1 version three with 2xMOPP level and ultra-low leakage current (<80 / A). Itis very suitable for BF (patient contact) type medical device or relevant equipment. H@ Model Encoding MFM - 10 - (5) Lo Output voltage Rated wattage Series name File Name:MFM-10-SPEC 2018-01-1210W High Reliable Green Medical On Board Type MFEM-10 series SPECIFICATION MODEL MFM-10-3.3 MFM-10-5 MFM-10-12 MFM-10-15 MFM-10-24 DC VOLTAGE 3.3V 5V 12V 15V 24V RATED CURRENT 2.5A 2A 0.85A 0.67A 0.42A CURRENT RANGE Note.2| 0 ~ 2.5A 0~2A 0~0.85A 0~0.67A 0~0.42A PEAK CURRENT 2.75A 2.2A 0.94A 0.74A 0.46A RATED POWER 8.3W 10W 10.2W 10W 10W PEAKLOAD(10sec.) _Note.3} 9W 11W 11.3W 11.4W 11W OUTPUT RIPPLE & NOISE (max.) Note.4} 120mVp-p 100mVp-p 180mVp-p 180mVp-p 200mVp-p VOLTAGE TOLERANCE Note.5 | +2.5% +2.5% +2.5% 42.5% 42.5% LINE REGULATION +0.3% +0.3% +0.3% +0.3% +0.3% LOAD REGULATION +0.5% +0.5% +0.5% +0.5% +0.5% SETUP, RISE TIME 1000ms, 30ms/230VAC 1000ms, 30ms/115VAC at full load HOLD UP TIME (Typ.) 40ms/230VAC 8ms/115VAC at full load VOLTAGE RANGE Note.6 | 80 ~ 264VAC FREQUENCY RANGE 47 ~ 440Hz INPUT EFFICIENCY (Typ.) 78% 81% 83% 83% 84% AC CURRENT (Typ.) 0.3A/115VAC 0.2A/230VAC INRUSH CURRENT (Typ.) COLD START 25A/115VAC 45A/230VAC LEAKAGE CURRENT (max.) Note.7| Touch current <80,A/264VAC 110% ~ 180% rated output power OVERLOAD Protection type : Hiccup mode, recovers automatically after fault condition is removed PROTECTION 3.8 ~ 5V 5.75 ~ 6.8V 13.8 ~ 16.2V 17.3 ~ 20.3V 27.6 ~ 32.4V ECs Protection type : Shut off o/p voltage, clamping by zener diode OVER TEMPERATURE Protection type : Shut down o/p voltage, recovers automatically after temperature goes down WORKING TEMP. -30 ~ +85C (Refer to "Derating Curve") WORKING HUMIDITY 20 ~ 90% RH non-condensing STORAGE TEMP., HUMIDITY | -40 ~ +100C, 10 ~ 95% RH non-condensing ENVIRONMENT | TEMP. COEFFICIENT +0.03%/C (0 ~ 50C) SOLDERING TEMPERATURE | 260C +5C/10sec.max. VIBRATION 10 ~ 500Hz, 5G 10min./cycle, period for 60min. each along X, Y, Z axes OPERATING ALTITUDE Note.8} 5000 meters IEC60601-1, EN60601-1, EAC TP TC 004,UL ANSI/AAMI ES60601-1(3.1 version), CAN/CSA-C22 3 Edition approved ; Design SAFETY STANDARDS refer to EN60335-1 ISOLATION LEVEL Primary-Secondary: 2xMOPP WITHSTAND VOLTAGE \/P-O/P:4KVAC ISOLATION RESISTANCE /P-O/P:100M Ohms / 500VDC / 25C/ 70% RH Parameter Standard Test Level / Note Conducted EN55011 (CISPR11) Class B EMC EMISSION Radiated EN55011 (CISPR11) Class B Harmonic Current EN61000-3-2 Class A SAFETY & Voltage Flicker EN61000-3-30 0 wee EMC EN60601-1-2 (Note 9) Parameter Standard Test Level / Note ESD EN61000-4-2 Level 4, 15KV air ; Level 4, 8KV contact RF field susceptibility EN61000-4-3 ae 9 9 28Vin( 38SMrie-6 78CH2 EFT bursts EN61000-4-4 Level 3, 2KV EMC IMMUNITY Surge susceptibility EN61000-4-5 Level 3, 1KV/Line-Line Conducted susceptibility EN61000-4-6 Level 3, 10V Magnetic field immunity EN61000-4-8 Level 4, 30A/m vee meat | ane te oa MTBF 1756.2Khrs min. MIL-HDBK-217F (25C) OTHERS | DIMENSION 42*22.3*20.5mm (L*W*H) or 1.65"*0.88"0.80" inch PACKING 0.018Kg; 270pcs/5.8Kg/0.97 CUFT 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25C of ambient temperature. 2. No minimum load required. 3. 33% Duty cycle maximum within every 30 seconds. Average output power should not exceed the rated power 4. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1f & 47f parallel capacitor. 5. Tolerance : includes set up tolerance, line regulation and load regulation. NOTE 6. Derating may be needed under low input voltages. Please check the derating curve for more details. 7. Touch current was measured from primary input to DC output. 8. The ambient temperature derating of 3.5C/1000m with fanless models and of 5C/1000m with fan models for operating altitude higher than 2000m(6500ft) 9. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. For guidance on how to perform these EMC tests, please refer to EMI testing of component power supplies. (as available on http:/Avwww.meanwell.com) File Name:MFM-10-SPEC 2018-01-12MW 10W High Reliable Green Medical On Board Type MFM-10 series Hi Block Diagram fosc : 100KHz Hi Derating Curve pol RECTIFIERS | | power | RECTIFIERS F O 4V SWITCHING FILTER FILTER FILTER OV PWM _ | iNy tL | petection |_| OLP CONTROL ae CIRCUIT Hi Output Derating VS Input Voltage LOAD (%) 4100 + | I 90 + | 80 | 70 F 60 50 F LOAD (%) 40 - AMBIENT TEMPERATURE (C) | i i | | i | | i | | i i | 0 (HORIZONTAL) 80 95 100 115 120 140 160 180 200 220 240 264 INPUT VOLTAGE (VAC) 60Hz File Name:MFM-10-SPEC 2018-01-12MW 10W High Reliable Green Medical On Board Type MFM-10 series i Mechanical Specification Hf Installation Manual TOP VIEW 16 Carr 1.8 1.05 Please refer to : http://www.meanwell.com/manual.html SIDE VIEW SH 20.5 Unit:mm File Name:MFM-10-SPEC 2018-01-12