Electronic Components Cannon Microminiature Connectors Customer Support Locations ASIA Tuopandun Industrial Area, Jinda Cheng, Xiner Village, Shajing Town, Baoan District, Shenzhen City, Guangdong, China 518125 Phone: (86) 755 2726 7238 Fax: (86) 755 2726 7515 GERMANY Cannonstrasse 1 Weinstadt, 71384 phone: 49.7151.699.0 fax: 49.7151.699.217 ITALY Corso Europa 41/43 Lainate (MI), Italy 20020 phone: 39.02938721 fax: 39.0293872300 UK Jays Close, Viables Estate Basingstoke, RG22 4BA phone: 44.1256.311200 fax: 44.1256.323356 USA 666 East Dyer Road Santa Ana, CA 92705 toll free: 1.800.854.3028 phone: 1.714.557.4700 fax: 1.714.628.2142 www.ittcannon.com (c)2006 ITT Corporation. "Engineered for life" and "Cannon" are registered trademarks of ITT Corporation. Specification and other data are based on information available at the time of printing, and are subject to change without notice. CMC-08-06 Cannon Microminiature Connectors Cannon Microminiature Products system, developed by ITT in the early 1960's. A separate section describes in detail the twist pin electrical contact technology (refer to page 6). High Performance Micro Miniature Connectors ITT Cannon is a division of ITT Inc. Developed first by Cannon in the 1960s, Cannon's Micro Connector portfolio has witnessed many product extensions since then, and it remains the most extensive in the industry, offering the most reliable and cost effective range of micro interconnect solutions. These innovations have enabled ITT to provide products and technologies to such markets as: * * * * * * * * * * Aerospace Computers Systems Defense Electronics Geophysical Industrial Automation Medical Electronics Network Systems Telecom Switching Underwater Systems Wireless Offering the broadest selections of standard and custom micro interconnect solutions, ITT is the one stop source for design, development, manufacturing, and test of sophisticated multi channel high density connectors. Our product portfolio consists of rectangular, circular, quick disconnect, high speed signal, filter, hermetic, mixed signal packages, and strip style interconnects. Each product has unique mechanical engagement and locking mechanisms to meet the demands of harsh environment applications. These products include our Centi Line .100-inch and .075-inch center spacing, the Micro line .050 inch center spacing, and our Nano line of .025-inch center contact spacing. All of ITT's micro connectors utilize our twist pin contact The Standard of Six Sigma When you specify a Cannon microminiature connector, you can rely on a product designed, developed, and manufactured to the highest quality and reliability standards in the industry. This tradition of excellence is based on ITT's corporate culture of operating its entire business under the principles of Six Sigma. At ITT, Six Sigma is not just a quality philosophy but a complete corporate culture that drives the entire business. Our Value Based Management and Value Based Product Development systems are two cornerstones of ITT that allows for the development of both leadership and product development principles, ensuring that the correct industry leading products are in all of our business portfolios. Six Sigma Engineering ITT, utilizing its six sigma tools and multiple lean initiatives, offers the most experienced engineering design team in the micro miniature interconnect field. Using our systems approach, ITT continues to advance new interconnect technologies by developing advanced products including higher density Nano 0.025-inch spacing interconnects, Chipon-Flex filter connectors, flexible high density circuits terminated directly to ITT contacts, and innovative high speed mixed signal connector configurations. In conjunction with our design teams, ITT operates a world class test lab offering state of the art capabilities in electronic, fiber optic, and mechanical test expertise . Our certified test engineers and technicians can develop a specific test plan based on our customer's specific needs. Additionally, our team is experienced in providing test services and programs for US DOD Defense electronics and Space related programs. Six Sigma Manufacturing developed to the accepted market driven lead times. These principles have allowed ITT to become the market leader ITT operates manufacturing facilities in the United States, France, Germany, Italy, Mexico, China, and the UK, all of www.ittcannon.com 2 Cannon Microminiature Products viding terminated flex circuit assemblies, high temperature geophysical cable assemblies, innovative medical electronics cable assemblies, over mold strain relief systems, and EMI shielded terminations. which have particular product area strengths allowing ITT to offer a truly global footprint to our customers. Our facilities are world class and accommodate full vertical integration with the latest manufacturing technologies including: automated and robotic machining centers, Super Market manufacturing cells, Kanban pull systems, and automated electrical, mechanical, and optical test and inspection equipment. The combination of our manufacturing strength and our advanced manufacturing facilities allows ITT to offer products at market driven prices. Our capabilities, especially in robotics, computerized precision tooling, Kaizen Project Management, Six Sigma tools, and test labs, gives ITT the most optimized global manufacturing footprint in the interconnect industry. RoHS Compliance Information ITT has implemented a strict parts control plan for all ITT electronics plants worldwide that allows the Cannon Microminiature connector product portfolio to meet the requirements of European Union Directive 2002/95/EC better know as the Reduction of Hazardous Substances initiative. To make things easier for our customers, all Cannon Microminiature products can be ordered with an R prefix number which insures our customers will receive RoHS compliant parts for their commercial electronics applications and equipment. Since most RoHS hazardous substances center around specific metal plating and lead solder coatings, ITT's products for RoHS compliance are available in the following plating finishes: electroless nickel, stainless steel, Anodize over aluminum and Gold plating. It should be noted that gold plating would be recommended as the replacement for tin-lead solder when ordering board mount connectors. The Custom Difference As the industry leader in harsh environment interconnect applications, ITT's world class engineering teams will work directly with our customers to design and develop cost effective solutions for their applications . In many cases we may modify one of our standard designs to ensure a highly reliable solution where timing is critical. Yet, in those cases where a complete custom interconnect solution is required, ITT will work with our customer's Engineers to design an interconnect solution which will be cost effective yet highly reliable. As professional consultants, our Engineering teams will provide a thorough systems and mechanical analysis of any proposed solution. These analyses provide our customers with sophisticated electrical signal and mechanical characterizations to determine the best solution for their application. Non Compliant RoHS Materials Advanced Aerospace specifications and DOD system performance requirements demand the necessity to maintain production status for the primary base metals and Chem film coatings typically utilized in Aerospace electronics. Thus, in order to support ITT's Aerospace customer base and maintain our leadership position in micro miniature connector technologies, ITT will continue to provide interconnect products with cadmium plating and tin lead solder in support of these markets. These materials are designed to be comparable to M83513. In addition to custom connectors, ITT offers sophisticated custom cable assembly capabilities for a wide range of harsh environment applications. Our in house expertise translates to our ability to integrate different technologies within a custom cable harness. ITT's capabilities include discrete wire terminations to multi wire cable harnesses with multiple connector configurations as part of the final assembly. We also specialize in pro- Please consult Customer Service if RoHS part verification is required. www.ittcannon.com 3 Table of Contents Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Microminiature Product Overview Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Twist Pin Contact System. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Micro-D Metal Shell - .050" Contact Spacing (MDM) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Micro-D PCB - .050" Contact Spacing (MDM-PCB) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 Micro-D Coaxial/Power - .050" Contact Spacing (MDM-C/P). . . . . . . . . . . . . . . . . . . . . . . . . . . 22 Hermetic (MDMH) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 Filter (TMDM) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 Micro-D Plastic Shell - .050" Contact Spacing (MD/MDV) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 Micro Center Jackscrew (MJS). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39 Microminiature Circular - .050" Contact Spacing (MIK, MIKM, MIKQ) . . . . . . . . . . . . . . . . . . . . 44 Microstrips .050" Contact Spacing (MT) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48 Microminiature Strip - .100/.050" Contact Spacing (MT). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52 Micro Edgeboard - .050" Contact Spacing (MEB) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54 The Centi Line - .075" Contact Spacing (2D). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59 Centi-D Loc-.075" Contact Spacing (CDL) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65 Strip Connectors - .100"/.075" Contact Spacing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66 The NANO Line - .025" Contact Spacing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70 Strip Connectors - .025" Contact Spacing (NT). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71 NANO D Metal Shell - .025" Contact Spacing (NDM) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72 Center Jackscrew - .030" Contact Spacing (NJS) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73 Custom Cable Assemblies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75 Flex Circuit Cable Assembly. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77 Custom Back Shells . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78 Appendix Standard Wire Termination "L" Code Chart. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79 Standard Wire Termination "H" Code Chart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81 Wire Color Code Chart. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83 Terminology . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84 Product Safety Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85 www.ittcannon.com 4 Cannon Microminiature Product Overview Guide Type Current Rating Contact Resistance Contact Material Shell Shell Material Available Layouts MDM MDM PCB MDM C/P MDMH Hermetics TMDM Filter MD** MDB Coaxial MJS MIK MIKM Plug and Socket Plug and Socket Plug and Socket Plug and Socket Plug and Socket Plug and Socket Plug and Socket Plug and Socket Plug and Socket Plug and Socket 3A max. 3A max. 3A max. 3A max. 3A max. 3A max. 3A max. 3A max. 3A max. 3A max. 8 milliohms max. 8 milliohms max. 8 milliohms max. 24 milliohms max. 15 milliohms max. 8 milliohms max. 8 milliohms max. 8 milliohms max. 8 milliohms max. 8 milliohms max. (signal) gold plated copper alloy gold plated copper alloy gold plated copper alloy gold plated copper and steel gold plated copper alloy gold plated copper alloy gold plated copper alloy gold plated copper alloy gold plated copper alloy gold plated copper alloy Metal Metal Metal Metal Metal Plastic Plastic Plastic Plastic Metal Aluminum Aluminum Aluminum Steel Aluminum Thermoplastic & Thermoset Thermoset Thermoplastic & Thermoset Thermoplastic Steel 7C/P2 10, 26, 51 & 66 Rect/unshrouded 16, 28 & 35 Rect/shrouded 26, 38, 42 & 76 Polarized D 7 & 55 7, 55 & 85 9, 15, 21, 25, 31, 9, 15, 21, 25, 31, 7C/P2, 24C/P4, 9, 15, 21, 25, 31, 9, 15, 21, 25, 31, 9, 15, 21, 25, 31, 37, 51 & 100 37, 51 & 100 27C/P5 & 37 & 51 37 & 51 37 & 51 10C/P10 Polarized D Polarized D Polarized D Polarized D Polarized D Polarized D Polarized D Rectangular & Polarized D Circular Circular Available Available Available Available No Available Available Available Available Available Factory Terminated Yes* Yes Yes Yes* Yes Yes* Yes Yes* Yes Yes Space Applications Available Available Available Yes Yes Available Available Available Yes Yes Page Number 7 18 22 23 25 28 32 39 44 44 MIKQ MT* MEB 2D CDL CTA* NDM NTP NJS Plug and Socket Plug and Socket Plug and Socket Plug and Socket Plug and Socket Plug and Socket Plug and Socket Plug and Socket Plug and Socket 3A max. 3A max. 3A max. 5A max. 5A max. 5A max. 1A max. 1A max. 1A max. Configuration RoHS Type Current Rating Contact Resistance Contact Material 8 milliohms max. 8 milliohms max. 8 milliohms max. 9 milliohms max. 9 milliohms max. 9 milliohms max. 60 milliohms max. 60 milliohms max. 60 milliohms max. gold plated copper alloy gold plated copper alloy gold plated copper alloy gold plated copper alloy gold plated copper alloy gold plated copper alloy precious metal precious metal precious metal alloy & gold plated alloy & gold plated alloy & gold plated copper alloy copper alloy copper alloy Shell Metal Plastic Plastic Plastic Plastic Plastic Metal Plastic Plastic Shell Material Steel Thermoplastic Thermoset Thermoplastic Thermoplastic Thermoplastic Thermoset Thermoset Thermoplastic 7, 19 & 37 MTV - 1 thru 120 MTB - 1 thru 80 64, 128, 92 & 184 19, 31, 52, 79 & 100 139 CTA3 - 1 thru 53 CTA4 - 1 thru 60 9, 15, 21, 25, 31 & 37 1 thru 40 Rectangular 9, 24 & 44 Circular - 27, 72 & 246 Configuration Circular Strip Polarized D Polarized D Polarized D Strip Polarized D Strip Rectangular & Circular RoHS Available Layouts Available Available Available Available Yes Yes Yes Yes Yes Factory Terminated Yes Yes* Yes* No No No Yes Yes Yes Space Applications Yes Yes Yes No No No Yes Yes Yes Page Number 44 48 54 59 65 66 72 71 73 * Solderpot versions available for end user termination Dimensions shown in inch (mm) Specifications and dimensions subject to change www.ittcannon.com 5 Micro Twist Pin Cannon Microminiature Products NORMAL MATING CONDITIONS Cannon MICROPIN WIRE WELDED TIP SEVERE MISALIGNMENT WIRE CRIMP SLEEVE CRIMP AREA Figure 1 TWIST PIN CONTACTS WILL MATE EVEN UNDER SEVERE MISALIGNMENT Pos-A-Line Contact Alignment Figure 2 The flexible twist-pin is recessed into the insulator and the rigid socket is exposed, reversing the traditional positions of pin and socket. During mating, the socket is guided into the pin insulator by the lead-in chamfer. The pin is kept from flexing beyond the socket capture radius by the walls of the cavity. The hemispherical weld of controlled radius at the tip of the pin combines with the lead-in chamfers of the socket contact and the pin insulator to carn the pin into alignment. By controlling the welding process and the dimensions of the socket contact and the insulators, it is impossible for the recessed pin to escape the socket capture radius. tact and insulator material. The net result is a contact system that makes it impossible for the recessed pin to escape the socket capture radius. Figure 2 shows the twist pin features as well as mating and severe misalignment conditions. Twist Pin Contact Technology The foundation of ITT's Cannon Micro Connector portfolio starts with ITT's innovative twist pin contact system. This system was originally developed in the early 1960's and ITT was one of the original interconnect companies to license this technology and improve it. Our forty five years of experience in manufacturing and establishing a fully automated manufacturing system for this contact has truly given ITT the foremost knowledge in twist pin contact technology. The advantages of ITT's twist pin contact system are many and have been field proven in the most demanding applications and environments for over forty five years. Some of these advantages include: * Seven points of electrical contact (Micro 0.050-inc & Centi Line 0.075-inch Interconnect Products) As the core of our micro products, the twist pin contact offers a superior electrical and mechanical system that outperforms traditional machined or stamped electrical contract systems. ITT's twist pin system consists of the Micro Socket and the Micro pin or Twist pin. Figure I show the basic contacts. * Five points of electrical contact (Nano 0.025-inch Interconnect Products) * Contact and crimp sleeve materials carefully optimized for extremely reliable crimps- No design tradeoffs Figure 1 The twist pin contact system consists of several stranded cores making up the wire bundle. The strands are subsequently heat treated and a weld is performed on the tip of each contact. Crimp sleeves are then inserted over the contact and crimp areas are defined to produce a seamless crimp system. The entire twist pin system is referred by ITT as a Pos-A-Line contact alignment system. Our reference to this system identifies that the flexible twist pin is recessed into the insulator and the rigid socket is exposed thus reversing the traditional positions of the pin and socket. During the mating sequence, the socket is guided into the pin insulator by the lead-in chamfer. The pin is kept from flexing beyond the socket capture radius by the walls of the cavity. The hemispherical weld of controlled radius at the tip of the pin combines with the lead-in chamfer of the socket contact and the pin insulator to cam the pin in alignment. ITT has developed a very robust Six Sigma manufacturing process that controls the welding process as well as the dimensions of the socket con- * Seamless crimp sleeves * Multiple 4-indent wire crimps standard and smaller bore micro socket contacts * Standard integral tail & thru bundle micro pin contacts (high density packaging) * High mating cycles * High current handling capabilities * System qualification in numerous Aerospace, Defense Electronic, and high temperature Geophysical applications. * Wide array of wire terminations The advantages listed above are by no means inclusive of ITT's innovative product improvement processes. Moving forward, ITT plans to introduce additional new product features supporting enhanced twist pin contact performance. Dimensions shown in inch (mm) Specifications and dimensions subject to change www.ittcannon.com 6 Micro-D Metal Shell - .050" Contact Spacing MDM connectors are used in applications requiring highly reliable, extremely small, lightweight connectors with higher density contact configurations than available in traditional rectangular connectors. They are available in 8 shell sizes accommodating from 9 to 100 contacts, and special arrangements of power and coaxial contacts. These connectors are designed to meet the rapidly increasing demands for an environmental, high performance, rugged, moisture-sealed microminiature connector. This connector MDM employs size 24 MICROPINTM/MICROSOCKETTM contacts on .050 (1.27) centers in a contact density identical to the standard MICRO-D connector series, but with these additional features: * Aluminum shells to provide greater strength, prevent chipping, cracking or breaking, offer electromagnetic (EMI) and RFI shielding. * Silicone elastomer compression interfacial seal to provide a moisture and humidity seal between each contact and between contacts and shell. Specifications STANDARD MATERIALS AND FINISHES MECHANICAL FEATURES Shell Coupling - Friction/jackscrews - 6061-T6 Aluminum alloy per QQ-A-200/8, yellow chromate/ Polarization - Keystone-shaped shells cadmium, Type II, Class 3 over Contact Spacing - .050 (1.27) electroless nickel per SAE Centers AMS-C-26074, Class 4. - Plug and receptacle - Liquid Crystal Polymer per MIL-M-24519, Shell Styles Insulator Type GLCP-30F (9-100) - 9 thru 100 signal; No. of Contacts 5 signal/2 coaxial; - Glass filled diallyl phthalate per 5 signal/2 power; MIL-M-14, Type SDGF (7*2 and 24*4) 11 signal/5 coaxial; - Polyphenylene sulfide per 11 signal/5 power; MIL-M-24519, Type GST-40F (16*5) 0 signal/10 coaxial; - Polyester per MIL-M-24519, Type 0 signal/10 power; GPT-30F (10*10) 20 signal/4 coaxial; - Copper alloy, gold plate Contacts 20 signal/4 power Mounting Hardware - 300 Series stainless steel, passivate Kit, Jackpost (3) items - 300 Series stainless steel, passivate Washer - 400 Series stainless stell, passivate Standard Epoxy Coaxial Cable Wire Size - RG - 178/U - #24 thru #32 AWG Contact Termination - Multiple indent crimp - Hysol EE4215/HD3561, color black or Hysol EE4198/HD3561, color green Performance Data The table below summarizes the results of key tests performed in accordance with MIL-STD-1344, where applicable. Data is applicable to standard connectors with standard termination. Variations may affect this data, so please consult customer service for further information on your requirements. Test Method Dielectric Withstanding Voltage Method 3001: 600 VAC at sea level 150 VAC at 70,00' altitude Method 3003 Method 1003. Condition A: - 55C to +125C Method 2004, Condition E: 50 G's, 3 axes, 6 millisecond duration sawtooth pulse Method 2005, Condition IV: 20 G's, 10-2,000 Hz. 12 hrs Insulation Resistance Thermal Shock Physical Shock Vibration Durability Moisture Resistance Salt Spray Contact Resistance (MIL-STD-202) Contact Retention Criteria of Acceptance 500 cycles of mating and unmating, 500 CPH max. Method 1002, Type II, omit steps 7a & 7b Method 1001, Condition B: 48 hours Method 1001, Condition B: At 3 amps At 1 milliamp Per 83513-Style Dimensions shown in inch (mm) Specifications and dimensions subject to change www.ittcannon.com 7 No breakdown No breakdown 5,000 megohms minimum No physical damage No physical damage No loss of continuity > 1 sec No physical damage No loss of continuity > 1 sec No mechanical or electrical defects Insulation resistance > 100 megohms Shall be capable of mating and unmating, and meet contact resistance requirements 8 milliohms maximum 10 milliohms maximum 5 lb. minimum axial load Micro-D Metal Shell - .050" Contact Spacing MDM How to Order For 83513-Style ordering information see pages 16 and 17 R MDM - 51 P H 001 P - XXX RoHS COMPLIANCE SERIES CONTACT ARRANGEMENTS CONTACT TYPE TERMINATION TYPE TERMINATION CODE HARDWARE SHELL FINISH MOD CODES SERIES MDM: (Size 9-100) Liquid Crystal Polymer (LCP) MDM: (Combo Layout) Diallyl Phthalate (DAP) CONTACT ARRANGEMENTS 9-15-21-25-31-37-51-100 (standard) 16C5, 10C10, 7C2, 24C4 (coaxial) or combination of 16P5, 10P10, 7P2, 24P4 (power) coax and power } CONTACT TYPE P - Pin S - Socket TERMINATION TYPE H - Harness-insulated wire. L - Solid-uninsulated wire. S - Solder pot to accept #26 AWG MAX. harness wire. (Not available with power contact arrangements.) HARDWARE M - Military specification hardware, see page 11 for military hardware codes. P - Jackpost K - Jackscrew-standard profile L - Jackscrew-low profile TERMINATION CODE* (H) 001 - 18",7/34 strand,#26 AWG, MIL-W-16878/4, Type E Teflon, yellow. (H) 003 - 18", 7/34 strand, #26 AWG, MIL-W-16878/4, Type E Teflon, color coded to MIL-STD-681 System I. (L) 1 - 1/2" uninsulated solid #25 AWG gold plated copper. (L) 2 - 1" uninsulated solid #25 AWG gold plated copper. SHELL FINISH MOD CODES No Number - (Standard cadmium/yellow chromate over nickel A174 - Electroless nickel A172 - Gold over nickel A141 - Irridite/alodine A30 - Black anodize *See page 79 and 81 for additional Termination codes. F - Float mount B - No hardware standard .091 (2.31) dia. hole for sizes 9-51; .120 (3.05) dia. hole for size 100. A - .125 (3.18) dia. mounting holes for sizes 9-51; .166 (4.22) dia. hole for size 100. B1 - .1475 (3.75) dia. hole for size 100 (Per 83513-Style) Dimensions shown in inch (mm) Specifications and dimensions subject to change www.ittcannon.com 8 Micro-D Metal Shell - .050" Contact Spacing MDM COTS or Non Mil-Spec or Commercial or Industrial Standard Wire Termination Codes Cannon Modification Code (Not MS) The following termination codes are listed for your information. For additional codes please refer to Appendix on page 79 and 81. All wire lengths are minimum. Solid Uninsulated Type (L) Harness Type (H) #25 AWG gold plated copper #26 AWG per MIL-W-16878/4, 7/34 strand, type E Teflon, stranded. All Yellow H020 H019 H026 H029 H028 H001 H038 H009 H010 H011 H013 H017 H042 Length 3 (76.2) 6 (152.4) 8 (203.2) 10 (254.0) 12 (304.8) 18 (457.2) 20 (508.0) 24 (609.6) 30 (762.0) 36 (914.4) 48 (1219.2) 72 (1828.8) 120 (3048.0) Color Coded* H027 H016 H034 H025 H002 H003 H023 H004 H005 H006 H048 H046 H041 Termination Code L61 L56 L57 L39 L58 L1 L14 L2 L7 L6 L16 L10 Length .125 (3.18) .150 (3.81) .190 (4.83) .250 (6.35) .375 (9.52) .500 (12.70) .750 (19.05) 1.000 (25.40) 1.500 (38.10) 2.000 (50.80) 2.500 (63.50) 3.000 (76.20) * Cavity #1 black Contact Arrangements (Face View of Pin insert - Use Reverse Order for Socket Side) Standard 1 2 6 3 7 4 8 5 1 9 2 9 14 2 3 4 5 6 7 8 9 4 5 6 7 8 1 10 11 12 13 14 15 2 3 10 11 12 13 15 16 17 18 19 20 21 22 23 24 1 25 17 2 3 4 5 6 7 18 19 20 21 22 23 25 Contacts 8 9 10 3 4 5 6 7 2 3 4 9 10 5 6 20 21 22 23 24 25 26 27 28 29 30 31 7 11 8 9 10 11 12 13 14 15 16 17 18 19 24 25 26 27 28 29 30 31 32 33 34 35 36 37 31 Contacts 8 9 13 14 15 16 17 18 19 20 21 37 Contacts 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 2 8 21 Contacts 1 11 12 13 14 15 16 1 1 .043 (1.09) 7 12 15 Contacts 9 Contacts 1 3 .025 (0.64) TYP. .050 (1.27) TYP. 4 5 6 46 47 48 49 50 51 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 100 Contacts 51 Contacts Contact identification numbers are for reference only and do not appear on insulator or connector body. A1 A2 1 2 5 8 3 6 9 4 A3 A4 A5 1 A1 7 10 .714 (18.14) .460 (11.68) .320 (8.13) Coaxial .103 2 4 11 Size 51 Shell 11 Micro contact 5 Coax or 5 Power 3 A1 A2 A2 A6 A3 A4 A7 A8 www.ittcannon.com 9 2 3 4 5 6 7 A3 A4 9 10 11 12 13 Size 51 Shell 20 Micro contacts 4 Coax or 4 Power (Not MS) A5 A9 Size 100 Shell 0 Micro contact 10 Coax or 10 Power Dimensions shown in inch (mm) Specifications and dimensions subject to change 1 14 15 16 17 18 19 20 Size 25 Shell 5 Micro contact 2 Coax or 2 Power A1 A2 8 5 A10 .007 (0.18) Micro-D Metal Shell - .050" Contact Spacing MDM COTS or Non Mil-Spec or Commercial or Industrial Shell Dimensions (Conforms to 83513-Style) Plug .110 (2.79) MAX. B .093 (2.36) REF. F D G .186 (4.72) MAX. .284 (7.21) MAX. TWO MTG. HOLES .091 .003(2.31 0.08) E .200 (5.08) MAX. .416 (10.57) MAX. C A Solder Pot Receptacle .110 (2.79) MAX. .296 (7.52) MAX. TWO MTG. HOLES .091 .003(2.31 0.08) F E D G .200 (5.08) MAX. B .093 (2.36) REF. .429 (10.09) MAX. C A .198 (5.03) MAX. Solder Pot Receptacle (MDM-100 only) TWO MTG. HOLES .120 .003(3.05 0.08) G D .429 (10.90) MAX. .394 (10.01) MAX. .198 (5.03) MAX. B .093 (2.36) REF. E .296 (7.52) MAX. F Pigtail termination C A Part Number By Shell Size MDM-9P* A Max. .785 (19.94) B Max. .334 (8.48) C Max. .400 (10.16) D Max. .270 (6.86) E Max. .308 (7.82) F +_.005 (0.13) .565 (14.35) G Max. .185 (4.70) Average Weights** oz. (gm.) 5% .063 (1.79) MDM-9S* .785 (19.94) .402 (10.21) .400 (10.16) .270 (6.86) .308 (7.82) .565 (14.35) .253 (6.43) .063 (1.79) MDM-15P* .935 (23.75) .484 (12.29) .550 (13.97) .270 (6.86) .308 (7.82) .715 (18.16) .185 (4.70) .084 (2.39) MDM-15S* .935 (23.75) .552 (13.97) .550 (13.97) .270 (6.86) .308 (7.82) .715 (18.16) .253 (6.43) .083 (2.37) MDM-21P* 1.085 (27.56) .634 (16.10) .700 (17.78) .270 (6.86) .308 (7.82) .865 (21.97) .185 (4.70) .105 (2.99) MDM-21P* 1.085 (27.56) .702 (17.83) .700 (17.78) .270 (6.86) .308 (7.82) .865 (21.97) .253 (6.43) .104 (2.97) MDM-25P* 1.185 (30.10) .734 (18.64) .800 (20.32) .270 (6.86) .308 (7.82) .965 (24.51) .185 (4.70) .119 (3.39) MDM-25S* 1.185 (30.10) .802 (20.37) .800 (20.32) .270 (6.86) .308 (7.82) .965 (24.51) .253 (6.43) .118 (3.36) MDM-31P* 1.335 (33.91) .884 (22.45) .950 (24.13) .270 (6.86) .308 (7.82) 1.115 (28.32) .185 (4.70) .140 (3.99) MDM-31S* 1.335 (33.91) .952 (24.18) .950 (24.13) .270 (6.86) .308 (7.82) 1.115 (28.32) .253 (6.43) .139 (3.96) MDM-37P* 1.485 (37.72) 1.034 (26.26) 1.100 (27.94) .270 (6.86) .308 (7.82) 1.265 (32.13) .185 (4.70) .161 (4.59) MDM-37S* 1.485 (37.72) 1.102 (27.99) 1.100 (27.94) .270 (6.86) .308 (7.82) 1.265 (32.13) .253 (6.43) .160 (4.56) MDM-51P* 1.435 (36.45) .984 (24.99) 1.050 (26.67) .310 (7.87) .351 (8.92) 1.215 (30.86) .228 (5.79) .193 (5.50) MDM-51S* 1.435 (36.45) 1.052 (26.72) 1.050 (26.67) .310 (7.87) .351 (8.92) 1.215 (30.86) .296 (7.52) .188 (5.35) MDM-100P* 2.170 (55.12) 1.384 (35.15) 1.442 (36.63) .360 (9.14) .394 (10.01) 1.800 (45.72) .271 (6.88) .500 (14.3) .394 (10.01) 1.800 (45.72) .394 (10.01) .360 (9.14) 1.442 (36.63) ***Weight given is 1/2", uninsulated, solid, #25 AWG gold plated copper pigtails. 1.040 (29.5) 1.508 (38.10) 2.170 (55.12) MDM-100S* *Add lead type and length; see How To Order. Panel Mounting Dimensions (Sizes 9 - 100) .300 .005 (7.62 0.13) .200 .005 (5.08 0.13) .395 .005 (10.03 0.13) Plug and Receptacle Rear Mounted Plug and Receptacle Front Mounted Plug Front Mounted Receptacle Rear Mounted Dimensions shown in inch (mm) Specifications and dimensions subject to change www.ittcannon.com 10 Micro-D Metal Shell - .050" Contact Spacing MDM Panel Cutouts NOTE: See page 13 for rear panel mounting configuration. Shell Sizes 9 thru 51 D TYP. C D TYP. A C .450.002 (11.430.05) .100 +.005 -.000 (2.54) +0.13 ) R TYP. -0.00 C .030 (0.76) TYP. D B B FULL R. (TYP.) A + + + + FULL R. (TYP.) .015 (0.38)R. MAX.(TYP) 26/27TYP FULL R. (TYP.) Figure 1 Front Mounting Figure 2 Rear Mounting PANEL REF. Figure 3 Edgeboard Mounting Shell Size 100 .450+_.002 .118 +.005 -.000 1.805 (3.00 +0.13 ) +.005 -.000 (45.85 +0.13 ) -0.00 -0.00 +.005 -.000 (45.85 +0.13 -0.00 ) +.005 -.000 (3.00 +0.13 ) -0.00 .118 .361 1.456 R. MAX (TYP.) +.004 1.520 -.000 (38.61 +0.10 ) .125 -0.00 ) Figure 1 Front Mounting NOTES: 1. Front panel mounting is the preferred mounting method. Front panel mounting dimensions (figure 1) will accommodate either #2-56 screws or jackpost hardware. 2. Rear panel mount dimensions (figure 2) will accommodate #2-56 screw hardware only. When mounting the connector with rear panel mount jackpost see the panel cut-out dimensions. 3. Edgeboard mounting bracket (figure 3) uses #256 screws. Dimension .450+/-.002 (11.43+/0.05) locates the MDM receptacle flush with the end of the board. FULL R. (TYP.) FULL R. (TYP.) Figure 2 Rear Mounting PANEL REF. Figure 3 Edgeboard Mounting Shell Size Cutout Figure 1 A +.004 -.000 .408 B +.004 -.000 .271 C +.005 -.000 .570 D +.005 -.000 .089 9 2 .401 .252 .570 .089 3 - - .570 .089 1 .558 .271 .720 .089 2 .551 .252 .720 .089 3 - - .720 .089 1 .708 .271 .870 .089 2 .701 .252 .870 .089 3 - - .870 .089 1 .808 .271 .970 .089 2 .801 .252 .970 .089 3 - - .970 .089 1 .958 .271 1.120 .089 2 .951 .252 1.120 .089 3 - - 1.120 .089 1 1.108 .271 1.270 .089 2 1.101 .252 1.270 .089 3 - - 1.270 .089 1 1.058 .315 1.220 .089 2 1.051 .295 1.220 .089 3 - 1.220 .089 15 21 25 For 100 Shell Size NOTES: 1. Front mounting is the preferred mounting method. Front panel mounting dimensions (figure 1) will accommodate either #4-40 screws or jackpost hardware. 2. Rear panel mount dimensions (figure 2) will accommodate #4-40 screw hardware only see the panel cut-out dimensions. 3.Edgeboard mounting bracket (figure 3) uses #440 screws. Dimension .450+/-.002 (11.43+/0.05) locates the MDM receptacle flush with the end of the board. + + -0.00 (3.18 For 9-51 Shell Sizes + + (10.18 +0.10 ) +.004 -.000 (36.98 +0.10 ) -0.00 FULL R. (TYP.) .118 31 37 51 Dimensions shown in inch (mm) Specifications and dimensions subject to change www.ittcannon.com 11 +.005 -.000 ) (3.00 +0.13 -0.00 +.004 .401 -.000 ) (9.17 +0.10 -0.00 .015 (0.38) +.005 -.000 ) (45.85 +0.13 -0.00 (0.76) TYP. 1.805 +.004 -.000 1.805 .030 (11.43+_0.05) Micro-D Metal Shell - .050" Contact Spacing MDM Mounting Hardware Views (for sizes 9-51) This hardware supplied unassembled. LOCK SCREW MATING FACE #2-56 UNC-2B RETAINING CLIP .408 (10.36) MAX. .182 (4.62) .688 (17.48) MAX. MAX. .185 (4.70) MAX. CONNECTOR SHOWN FOR REF. ONLY PANEL REF. .232 (5.89) MAX. BUSHING Screw Lock Assembly #2-56 UNC-2A .093 (2.36) RECOMMENDED PANEL THICKNESS Jackpost - (P) Screw Lock Assembly* *NOTE Torque value is 2.5 in/lbs max. .052 (1.32) TYP. .096 .005 (2.44 0.13)DIA. .178 .005 (4.52 0.13) .170 (4.32) MAX. 90 Angle Mounting Bracket .500 (12.7) MAX. #2-56 UNC-2B THD .260 (6.60) MAX. B A Description 90 Angle Mounting Bracket Part Number A +/-.005 (0.13) B Max. Screw Lock Assembly 322-9500-000 N/A Jackpost kit 320-9505-000 N/A Mounting Bracket 90 MDM 015-9516-002 .147 (3.73) .308 (7.82) for 9 thru 37 Shell Sizes Mounting Bracket 90 MDM 015-9516-003 .169 (4.29) .350 (8.89) for 51 Shell Size NOTES: Screw lock assembly (322-9500-000) can be used for front mounting only. Jackpost kit (320-9505-000) consists of two assmblies, shipped unassmbled. Jackpost Bushing (for rear panel mounting-for sizes 9-51) HEX IS .135 (3.43)/.115 (2.92) ACROSS FLATS .170 (4.32) .185 (4.70) C #2-56 UNC-2B THD MATING FACE .105 (2.67) A .100 (2.54) .126 (3.20) R TYP. .125 (3.18) DIA. TYP A 27 26 .500 (12.7) TYP Jackpost diameter within the "A" dimension is .124/.120 (3.15/3.05). Plug and Receptacle Dimensions A +.004 (0.10) Shell -.000 (0.00) Size 9 .401 (10.19) 15 .551 (14.00) 21 .701 (17.81) 25 .801 (20.34) 31 .951 (24.16) 37 1.101 (27.97) 51 1.051 (26.70) .480 (12.19) #2-56 UNC 2A THD Panel A Thickness 3/32 (2.4) 1/16 (1.6) 3/64 (1.2) 1/32 (0.8) B A +.005 (0.13) -.000 (0.00) .087 (2.21) .056 (1.42) .042 (1.07) .025 (0.64) Jackpost Kit Number* 320-9505-007 320-9505-006 320-9505-005 320-9505-004 B +.004 (0.10) -.000 (0.00) .252 (6.40) .252 (6.40) .252 (6.40) .252 (6.40) .252 (6.40) .252 (6.40) .295 (7.49) C +_.005 (0.13) .565 (14.35) .715 (18.16) .865 (21.97) .965 (24.51) 1.115 (28.34) 1.265 (32.13) 1.215 (30.86) *A kit consists of 2 jackpost, 2 nuts, 2 washers. Dimensions shown in inch (mm) Specifications and dimensions subject to change www.ittcannon.com 12 Micro-D Metal Shell - .050" Contact Spacing MDM Mounting Hardware Views (sizes 9-51) This hardware is factory installed. MATING FACE .014 .004 (0.36 0.10) ALLOWABLE DIAMETRAL FLOAT .020 (0.51) MAX. ALLOWABLE AXIAL FLOAT .185 (4.70) MAX .150 .003 .735 (18.67) MAX. CONNECTOR SHOWN FOR REF. ONLY CONNECTOR SHOWN FOR REF ONLY HEX HEAD .050 (1.27) ACROSS FLATS .050 (1.27) DEEP (REF) .490 (12.45) MAX (3.81 .076) .155 (3.94) MAX. .093 (2.36) REF. .090 .0015 .031 .003 (2.29 0.038)DIA (0.79 0.08) MATING FACE Float Mount - (F) #2-56 UNC-2A MATING FACE PART HAS A .040 (1.02) MAX AXIAL FLOAT Jackscrew - (K) Standard Profile Shown here is a cutaway view of the float mount for the MDM connector. The basic shell dimensions are the same for the float mount and the screw mounting hole configurations. View shown is for standard float mount front panel mounting. Reverse mounting is available on request. PART HAS A .040 (1.02) MAX. AXIAL FLOAT #2-56 UNC-2A Jackscrew - (L) Low Profile * NOTE: Torque values are as follows: Low Profile Jackscrew (L)-2.5 in-lbs Standard Jackscrew (K)-2.5 in-lbs Mounting Hardware to Military Specification (for sizes 9 - 100) per 83513/5-Style This hardware supplied in kits unassembled (2 pieces of each item). #2-56 UNC-2A THREAD TYP. PLUG (REF. WITH .092 (2.34) DIA. MOUNTING HOLES #2-56 UNC-2A THREAD TYP. .062 (1.57) HEX. (REF.) .361 (9.17) MAX. .390 (9.91) MAX. SIZE 100 ONLY PLUG (REF.) WITH .092 (2.34) DIA. MOUNTING HOLES .010 (0.25) TH'K (REF.) .010 (0.25) TH'K (REF.) POTTING WELL (REF.) Figure 1. Jackscrew - Low profile Slotted Head Size 9-51 Size 100* Allen head Optional Head Configuration Plug and Receptacle Low and High Profile Size 9-51 Size 100* (same dimensions) .868 (22.05) MAX. .902 (22.91) MAX. POTTING WELL (REF.) Figure 2. Jackscrew - High Profile Slotted Head Size 9-51 Size 100* .125 (3.18) HEX. .187 (4.75) HEX. #2-56 UNC-2B THREAD #4-40 UNC -2A THREAD .190/.185(4.83/4.70) .185/.175(4.70/4.44) .475 .025 (12.06 0.64) SIZE 100 SAME LOCKWASHER RETAINING NUT .154 (3.91) HEX. .187 (4.75) HEX. .062 .010 (.157 0.25) SIZE 100 SAME To order hardware kits separately, order either by M83513/5-Style** or by 320-950X-XXX. Size 9-51 Mod Code Part Number Description ** Size 100* Mod Code Part Number ** Slotted Head Jackscrew Assy Low Profile (Figure 1) M5 320-9508-025 05 M15 320-9508-021 15 Slotted Head Jackscrew Assy Low Profile (Figure 2) M6 320-9508-027 06 M16 320-9508-023 16 Allen Head Jackscrew Assy Low Profile (Figure 1) M2 320-9508-026 02 M12 320-9508-022 12 Allen Head Jackscrew Assy High Profile (Figure 2) M3 320-9508-028 03 M13 320-9508-024 13 Jackpost Assy (Figure 3) M7 320-9505-033 07 M17 320-9505-030 17 Figure 3. Jackpost Assembly Size 9-51 Size 100* *Size 100 requires B1 size mounting holes for Mil-Spec hardware Note: Torque values as follows: Size 9-51 4.0 in-lbs Size 100 6.0 in-lbs Dimensions shown in inch (mm) Specifications and dimensions subject to change www.ittcannon.com 13 Micro-D Metal Shell - .050" Contact Spacing MDM Mounting Hardware Views (for size 100) This hardware supplied unassembled. .123 .005 (3.12 0.13) DIA. #4-40 UNC-2B THD +.010 #4-40 UNC-2A THD 180 -.005 (4.57 +.025) PANEL MAY BE USED WITH .093 (2.36) MAX THICK PANEL #4 LOCK WASHER -0.13 A .395 (10.03) MAX. .500 (12.70) MAX. .185 (4.70) MAX. MATING SIDE #4-40 UNC-2B NOTHING OR FEMALE THD Jackpost - (P) 90Angle Mounting Bracket B .064 .010 (1.62 0.25) TYP. .235 .005 (5.97 0.13) Note: Size 100 requires .120 dia (B) mounting hole when using Commercial (P) jackpost kits. 90 Angle Mounting Bracket Part Number 320-9505-015 015-9528-000 Description Jackpost kit Mounting Bracket 90 MDM B Max. A .005 (0.13) N/A .191 (4.85) .370 (9.40) This hardware is factory installed. .014 .004 (0.36 0.10) ALLOWABLE DIAMETRAL FLOAT .020 (0.51) MAX. ALLOWABLE AXIAL FLOAT .185 (4.70) MAX MATING FACE .735 (18.67) MAX. CONNECTOR SHOWN FOR REF. ONLY .174 .005 (4.4 .10) HEX. SOCKET HEAD. .078 (1.98) ACROSS FLATS .050 (1.27) MIN. DEPTH .155 (3.94) MAX. .093 (2.36) REF. .040 (1.02) MAX. AXIAL FLOAT .116 .002 (2.29 .051) DIA .031 .003 (0.79 0.08) #4-40 UNC-2A THD MATING FACE PART HAS A .040 (1.02) MAX AXIAL FLOAT MATING SIDE Jackscrew - (K) Standard Float Mount - (F) Std. #4-40 UNC-2A THD Jackscrew - (L) (Low Profile) *NOTE: Torque values are as follows: Low Profile Jackscrew (L)-4.0 in-lbs Standard Profile Jackscrew (K)-4.0 in-lbs Jackpost Bushing (for Rear Panel Mounting) ENGAGING FACE Dimensions for Rear Panel Mounting 3/16" HEX. LOCKING POST 1.800 .005 (45.72 0.13) #4-40 UNC-2B .185 (4.70) +.004 .401 -.000 (10.18 +1.10 ) -0.00 .170 (4.32) Panel Thickness A +.005 (0.13) -.000 (0.00) Jackpost Kit Number* 3/32 (2.4) 1/16 (1.6) 1/32 (0.8) 3/64 (1.2) .087 (2.21) .058 (1.42) .025 (0.64) .042 (1.07) 320-9505-013 320-9505-012 320-9505-010 320-9505-011 A .500 (12.70) MAX. +.004 1.516 -.000 RECEPTACLE SHOWN FOR REF. ONLY #4-40 THREAD RETAINING NUT +.005 .125 -.000 R (3.18 +0.13 ) -0.00 .161 (4.09) .159 (4.04) DIA. (38.51 +1.10 ) -0.00 *2 jackposts, 2 nuts, 2 washers Torque value for size 100 Note: Size 100 requires B mounting hole shell size when using rear panel mount jackposts Dimensions shown in inch (mm) Specifications and dimensions subject to change www.ittcannon.com 14 Micro-D Metal Shell - .050" Contact Spacing MDM Connector Saver Save wear and tear on your equipment and systems connectors by using the "Connector Saver". Simply mate the "Connectors Saver" to your unit and use the opposite side for your testing interface...less wear, less tear, less chance of damage. It is available in all eight standard MDM layouts. Mating hardware is available and can be ordered either separately or included with the connector saver. The multi-matings and unmatings experienced by most connectors during testing and final check out can be eliminated. .790 (20.07) MAX. .040 (1.02) MAX. ALLOWABLE AXIAL FLOAT #2-56 UNC-2A THD (9-51) (TYP.) .315 (8.00) MAX. JACKSCREW/JACKPOST BUSHING (FOR REFERENCE ONLY SEE ORDERING INFORMATION BELOW.) MICROSOCKET MICROPIN B CONNECTOR RECEPT A CONNECTOR, PLUG BACKPOTTING, EPOXY INTERFACIAL SEAL .185 (4.70) MAX. (TYP.) .090 (2.29) REF. (TYP.) C .900 (22.86) REF. E-RING (TYP.) MDM Size 9 Shown Size Electroless Nickel (A174) Plated With Hardware W/O Hardware Cadmium over Nickel (A101) Plated With Hardware W/O Hardware *Hardware Kits A Max. B .005 (0.13) C Max. 9 MDM98479-86 MDM98479-18 MDM98479-78 MDM-97294-371 320-9505-014** .785 (19.94) .565 (14.35) .308 (7.82) 15 MDM98479-87 MDM98479-19 MDM98479-79 MDM-97294-372 320-9505-014** .935 (23.75) .715 (18.16) .308 (7.82) 21 MDM98479-88 MDM98479-20 MDM98479-80 MDM-97294-373 320-9505-014** 1.085 (27.56) .865 (21.97) .308 (7.82) 25 MDM98479-89 MDM98479-21 MDM98479-81 MDM-97294-374 320-9505-014** 1.185 (30.10) .965 (24.51) .308 (7.82) 31 MDM98479-90 MDM98479-14 MDM98479-82 MDM-97294-375 320-9505-014** 1.335 (33.91) 1.115 (28.32) .308 (7.82) 37 MDM98479-91 MDM98479-15 MDM98479-83 MDM-97294-376 320-9505-014** 1.485 (37.72) 1.265 (32.13) .308 (7.82) 51 MDM98479-92 MDM98479-16 MDM98479-84 MDM-97294-377 320-9505-014** 1.435 (36.45) 1.215 (30.86) .351 (8.91) 100 MDM98479-93 MDM98479-17 MDM98479-85 MDM-97294-717 320-9508-014*** 2.170 (55.12) 1.800 (45.72) .394 (10.01) * Kit contains 2 jackpost/jackscrew bushings and 2 E-Rings. ** Size 9-51-#2-56 UNC-2B Thread *** Size 100-#4-40 UNC-2B Thread Dimensions shown in inch (mm) Specifications and dimensions subject to change www.ittcannon.com 15 83513-Style Micro-D Metal Shell - .050" Contact Spacing How to Order - 83513-Style Part Number Nomenclature - Slash Sheets 1-9 M83513/ 01 - SERIES MDM MDB MDVB - H100 - * * **** Metal Shell, Liquid Crystal Polymer (LCP) Diallyl Phthalate Insulator Polyester Insulator 83513-Style SLASH SHEET 01 02 03 04 05 06 07 08 09 - Plug, Connector, Solderpot Receptacle, Connector, Solderpot Plug, Connector, Crimp Type Receptacle, Connector, Crimp Type 7 Hardware Only Plug, Connector, Solderpot Receptacle, Connector, Solderpot Plug, Connector, Crimp Type Receptacle, Connector, Crimp Type Metal Shell Plastic 5 INSERT ARRANGEMENT A B C D E F G H - METAL SHELL PLASTIC 9 Contact 15 Contact 21 Contact 25 Contact 31 Contact 37 Contact 51 Contact 100 Contact 9 Contact 15 Contact 21 Contact 25 Contact 31 Contact 37 Contact 51 Contact 5 WIRE TYPE No Number - For Solderpot 01 - 18" long, #26 AWG per MIL-W-22759/11-26-9 (all white) 02 - 36" long, #26 AWG per MIL-W-22759/11-26-9 (all white) 03 - 18" long, #26 AWG per MIL-W-22759/11-26 Color Coded per MIL-STD-681, System 1, 10 colors repeating 04 - 36" long, #26 AWG per MIL-W-22759/11-26Color Coded per MIL-STD-681, System 1, 10 colors repeating 05 - .5" long. #25 AWG, type S per QQ-W-343, Gold Plated 06 - 1.0" long, #25 AWG, type S per QQ-W-343, Gold Plated 07 - .5" long, #25 AWG, type S per QQ-W-W-343, Tin Plated 08 - 1.0" long, #25 AWG, type S per QQ-W-343, Tin Plated 09 - 18" long, #26 AWG per MIL-W-22759/33-26-9 (all white) 10 - 36" long, #26 AWG per MIL-W-22759/33-26-9 (all white) 11 - 18" long, #26 AWG per MIL-W-22759/33-26 NOTES: Color Coded per MIL-STD-681, System 1, 10 colors repeating 1 - For every Mil Spec Part Number, ITT has one corresponding 12 - 36" long, #26 AWG per MIL-W-22759/33-26 part number shown an example Color Coded per MIL-STD-681, System 1, 10 colors repeating 2 - Tolerance on wire lengths: 18", 36" and 72" long -- 13 - 72" long, #26 AWG per MIL-W-22759/11-26-9 (all white) +1.00"/-0.00" 14 - 72" long, #26 AWG per MIL-W-22759/11-26 .5" and 1.00" -- + .200"/-.000" 3 - For space application, connector shell finish must be "A174" Color Coded per MIL-STD-681, System 1, 10 colors repeating and wire must be per MIL-W-22759/33-26. 15 - 72" long, #26 AWG per MIL-W-22759/33-26-9 (all white) 4 - Any deviations to these P/N's will result in assignment of a 16 - 72" long, #26 AWG per MIL-W-22759/33-26 special P/N, consult factory. Color Coded per MIL-STD-681, System 1, 10 colors repeating Size 100 not available in / 06 through / 09. (Plastic shell) 5 6 - Color coding in accordance with MIL-STD-681, System 1, no parenthesis. See page 83 for color code chart. 7 - For mounting hardware to Military Specification (sizes 9 to 100) see page 13. 6 6 3 3 3 6 3 6 6 3 3 6 SHELL FINISH No number - for plastic type connector C - for Cadmium/Yellow chromate over nickel N - A174 - Electroless Nickel A174 3 Dimensions shown in inch (mm) Specifications and dimensions subject to change www.ittcannon.com 16 Micro-D Metal Shell - .050" Contact Spacing 83513-Style How to Order - 83513-Style Part Number Nomenclature - Slash Sheets 10-27 M83513/ 10 - A SERIES Connector, Electrical, Rectangular Microminiature, Polarized Shell PC Board Mounting MIL-C-83513 SLASH SHEET 10 - Connector, Plug, Condensed Board Right Angle (CBR), Sizes 9 - 37 11 - Connector, Plug, CBR, Size 51 12 - Connector, Plug, CBR, Size 100 13 - Connector, Receptacle, CBR, Sizes 9 - 37 14 - Connector, Receptacle, CBR Size 51 15 - Connector, Receptacle, CBR, Size 100 16 - Connector, Plug, Board Right Angle (BR), Sizes 9 - 37 17 - Connector, Plug, BR, Size 51 18 - Connector, Plug, BR, Size 100 19 - Connector, Receptacle, BR, Sizes 9 - 37 20 - Connector, Receptacle, BR Size 51 21 - Connector, Receptacle, BR Size 100 22 - Connector, Plug, Board Straight (BS), Sizes 9 - 37 23 - Connector, Plug, BS, Size 51 24 - Connector, Plug, BS, Size 100 25 - Connector, Receptacle, BS, Sizes 9 - 37 26 - Connector, Receptacle, BS, Size 51 27 - Connector, Receptacle, BS Size 100 INSERT ARRANGEMENT METAL SHELL A B C D E F G H NOTES: 1 - For every Mil Spec Part Number, ITT has one 2 - Tolerance on wire lengths .015 3 - For space application, connector shell finish must be "N". 4 - Any deviations to these P/N's will result in assignment of a special P/N, consult customer service. corresponding part number 9 Contact - 15 Contact - 21 Contact - 25 Contact - 31 Contact - 37 Contact - 51 Contact - 100 Contact WIRE TYPE No Number - For Solderpot 01 - .109" long, #24 AWG solid copper wire per QQ-W-343, Type "S", solder dipped 02 - .140" long, #24 AWG solid copper wire per QQ-W-343, Type "S", solder dipped 03 - .172" long, #24 AWG solid copper wire per QQ-W-343, Type "S", solder dipped SHELL FINISH No letter - for plastic type connector C - Cadmium / Yellow chromate over nickel N - Electroless Nickel 3 3 HARDWARE N - No jackpost P - Jackpost (permanently attached) T - Threaded insert Dimensions shown in inch (mm) Specifications and dimensions subject to change www.ittcannon.com 17 2 ** C * Micro-D PCB - .050" Contact Spacing MDM-PCB MDM-PCB connectors are designed for use with flex circuitry, flat cable and printed circuit boards or multi-layer boards. They use the standard MDM metal shell and provide high density and high reliability in board-to-board, board-to-cable and cable-to-cable applications. MDM-PCB connectors are available in 8 shell sizes with 9 to 100 contacts. Terminations may be straight (BS) or at 90 right angle (BR, CBR) board thickness. Jackpost mounting for use with locking hardware is also available. How to Order - MDM-PCB Series R MDM * - 25 P BS P - T L39 A174 RoHS COMPLIANCE SERIES INSULATOR MATERIAL CONTACT ARRANGEMENT CONTACT TYPE TERMINATION TYPE MOUNTING HARDWARE (Shell Flange) MOUNTING HARDWARE FOR PCB TERMINATION TAIL LENGTH MODIFICATION CODE SHELL FINISH MODIFICATION CODES SERIES MDM - Micro "D" Metal Shell INSULATOR MATERIAL Liquid Crystal Polymer (LCP) CONTACT ARRANGEMENT 9, 15, 21, 25, 31, 37, 51, and 100 CONTACT TYPE P - Pin (Plug) S - Socket (Receptacle) NOTE: Back molding material - Epoxy Hysol #MG40FS TERMINATION TYPE BS - Straight PCB Termination BR - Right Angle PCB Termination CBR - Right Angle Narrow Profile PCB Terminations MOUNTING HARDWARE (Shell Flange) P - Jackposts M7 - Jackposts M83513/5-07 (Sizes 9-51) M17 - Jackposts M83513/5-17 (Size 100) No letter - none MOUNTING HARDWARE FOR PCB T - Threaded Insert #2-56 Thd for Shell Sizes 9 thru 51 #4-40 Thd for Shell Size 100 No letter - none TERMINATION TAIL LENGTH MODIFICATION CODE None - .109 (2.77) .015 (0.38) Standard L61 - .125 (3.18) L56 - .150 (3.81) L57 - .190 (4.83) L39 - .250 (6.35) L58 - .375 (9.52) SHELL FINISH MODIFICATION CODES None - Yellow Chromate/Cadmium over Nickel A174 - Electroless Nickel A172 - Gold over Nickel A141 - Irridite/Alodine A30 - Black Anodize (For special modification codes, consult customer service.) Dimensions shown in inch (mm) Specifications and dimensions subject to change www.ittcannon.com 18 Micro-D PCB - .050" Contact Spacing MDM-PCB BS (Board Straight) Series A B D C .186 (4.72) MAX. PLUG .198 (5.03) MAX. RECEPTACLE F E G J CAV. #1 .096 .005 (2.44 0.13) DIA. Size 9-51) K H LAST CAV. JACKPOST (9-51) #2-56 UNC-2B TYP. .109 0.15 (2.77 0.38) JACKPOST (100) #4-40 UNC-2B TYP. .120 .005 (3.05 0.13) Size 100 LAST CAV. * .100 (2.54) REF. CAV. #1 PCB Termination Arrangements* (Viewed from PCB solder side) Identification number shown for plug connector, use reverse order for socket connector. .050 (1.27) 6 1 7 2 8 3 .050 (1.27) 9 4 5 1 2 3 4 5 6 7 .050 (1.27) .050 (1.27) 9 10 11 12 13 14 15 .375 (9.53) NOTE: Dimensions shown are for reference only-consult factory for final design dimensions. 12 13 8 1 2 14 15 16 17 18 19 20 21 3 5 6 7 8 9 10 11 15 Contacts 2 3 4 5 6 7 8 9 10 20 21 22 23 24 25 26 27 28 29 30 31 11 12 13 14 15 16 1 .150 (3.81) 2 3 4 5 6 7 8 9 10 .050 (1.27) 32 33 34 35 36 37 .100 (2.54) TYP. 77 27 1 78 53 28 2 79 54 29 3 5 6 7 8 9 10 11 36 12 13 37 38 39 40 41 42 43 44 45 46 47 48 19 11 12 13 14 15 16 17 18 19 1 37 Contacts 52 4 49 50 51 35 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 .150 (3.81) 31 Contacts 76 3 25 Contacts .050 (1.27) 1 2 21 Contacts 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 .150 (3.81) 1 .150 (3.81) .225 (5.72) .225 (5.72) TYP. 9 Contacts 4 14 15 16 17 18 19 20 21 22 23 24 25 80 30 4 81 55 56 31 5 82 57 32 6 83 58 33 7 84 59 34 8 85 60 35 9 86 61 36 10 87 62 37 11 12 88 63 38 89 64 39 13 90 65 40 14 51 Contacts 91 66 41 15 92 67 42 16 93 43 17 94 68 69 44 18 19 95 70 45 96 71 46 20 21 97 72 47 98 73 48 22 .150 (3.81) 99 49 23 100 74 75 50 24 25 51 26 .150 (3.81) 100 Contacts NOTE: Standard lead termination is #24 AWG, solid copper, solder or tin dipped All Termination Configurations .100 (2.54) x .100 (2.54) Grid Pattern, Offset .050 (1.27) Part Number By Shell Size MDM-9PBS* A Max. 1.390 (35.31) B .007 (.18) 1.150 (29.21) C .005 (.13) .565 (14.35) D Max. .785 (19.94) E Max. .334 (8.48) F Max. .185 (4.70) G Max. .308 (7.82) H Max. .165 (4.19) J Max. .355 (9.02) K Max. .555 (14.10) MDM-9SBS* 1.390 (35.31) 1.150 (29.21) .565 (14.35) .785 (19.94) .402 (10.21) .253 (6.43) .308 (7.82) .165 (4.19) .355 (9.02) .555 (14.10) MDM-15PBS* 1.390 (35.31) 1.150 (29.21) .715 (18.16) .935 (23.75) .484 (12.29) .185 (4.70) .308 (7.82) .165 (4.19) .355 (9.02) .555 (14.10) MDM-15SBS* 1.390 (35.31) 1.150 (29.21) .715 (18.16) .935 (23.75) .552 (13.97) .253 (6.43) .308 (7.82) .165 (4.19) .355 (9.02) .555 (14.10) MDM-21PBS* 1.690 (43.93) 1.450 (36.83) .865 (21.97) 1.085 (27.56) .634 (16.10) .185 (4.70) .308 (7.82) .165 (4.19) .355 (9.02) .555 (14.10) MDM-21SBS* 1.690 (43.93) 1.450 (36.83) .865 (21.97) 1.085 (27.56) .702 (17.83) .253 (6.43) .308 (7.82) .165 (4.19) .355 (9.02) .555 (14.10) MDM-25PBS 1.740 (44.20) 1.500 (38.10) .965 (24.51) 1.185 (30.10) .734 (18.64) .185 (4.70) .308 (7.82) .165 (4.19) .355 (9.02) .555 (14.10) MDM-25SBS* 1.740 (44.20) 1.500 (38.10) .965 (24.51) 1.185 (30.10) .802 (20.37) .253 (6.43) .308 (7.82) .165 (4.19) .355 (9.02) .555 (14.10) MDM-31PBS* 2.040 (51.82) 1.800 (45.72) 1.115 (28.32) 1.335 (33.91) .884 (22.45) .185 (4.70) .308 (7.82) .165 (4.19) .355 (9.02) .555 (14.10) MDM-31SBS* 2.040 (51.82) 1.800 (45.72) 1.115 (28.32) 1.335 (33.91) .952 (24.18) .253 (6.43) .308 (7.82) .165 (4.19) .355 (9.02) .555 (14.10) MDM-37PBS* 2.340 (59.44) 2.100 (53.34) 1.265 (32.13) 1.485 (37.72) 1.034 (26.26) .185 (4.70) .308 (7.82) .165 (4.19) .355 (9.02) .555 (14.10) MDM-37SBS* 2.340 (59.44) 2.100 (53.34) 1.265 (32.13) 1.485 (37.72) 1.102 (27.99) .253 (6.43) .308 (7.82) .165 (4.19) .355 (9.02) .555 (14.10) MDM-51PBS* 2.270 (67.66) 2.000 (50.80) 1.215 (30.86) 1.435 (36.45) .984 (24.99) .228 (5.79) .351 (8.92) .165 (4.19) .355 (9.02) .555 (14.10) MDM-51SBS* 2.270 (67.66) 2.000 (50.80) 1.215 (30.86) 1.435 (36.45) 1.052 (26.72) .296 (7.52) .351 (8.92) .165 (4.19) .355 (9.02) .555 (14.10) MDM-100PBS* 3.070 (77.98) 2.800 (71.12) 1.800 (45.72) 2.175 (55.24) 1.384 (35.15) .271 (6.88) .460 (11.68) .303 (7.70) .550 (12.70) .686 (17.42) 3.070 (77.98) 2.800 (71.12) 1.800 (45.72) MDM-100SBS* *For jackpost, add letter "P" or "M7" for sizes 9-51, "M17" for size 100. 2.175 (55.24) 1.508 (38.30) .394 (10.01) .460 (11.68) .303 (7.70) .550 (12.70) .686 (17.75) Dimensions shown in inch (mm) Specifications and dimensions subject to change www.ittcannon.com 19 Micro-D PCB - .050" Contact Spacing MDM-PCB BR (Board Right Angle) Series C .109 .015 (2.77 0.38) E CAV. #1 JACKPOST #2-56 UNC-2B TYP. .186 (4.72) MAX. PLUG .198 (5.05) MAX. A G B .125 .015 (3.18 0.38) D .100 (2.54) TYP. F LAST CAV. .050 (1.27) TYP. .096 .005 (2.44 0.31) .150 .010 (3.8 0.25) .100 TYP. PCB Termination Arrangements (Viewed from bottom of connector, PCB solder side.) Identification number shown for plug connector, use reverse order for socket connector. .150 (3.81) 6 1 7 2 8 3 .375 (9.53) 9 4 9 10 11 12 13 14 15 5 1 2 3 4 5 6 7 12 13 .300 (7.62) 8 .150 (3.81) .150 (3.81) .150 (3.81) 1 2 14 15 16 17 18 19 20 21 22 23 24 25 14 15 16 17 18 19 20 21 3 4 5 6 7 8 1 9 10 11 15 Contacts 9 Contacts 4 5 5 6 7 8 9 10 11 12 13 .175 (4.45) 25 Contacts .050 (1.27) 20 21 22 23 24 25 26 27 28 29 30 31 36 32 33 34 35 36 37 19 3 4 .150 (3.81) 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 2 3 21 Contacts .150 (3.81) 1 2 .225 (5.72) 6 7 8 9 10 11 12 13 14 15 16 1 2 3 4 5 6 7 8 9 10 1 11 12 13 14 15 16 17 18 19 3 4 5 6 7 8 9 10 49 50 51 34 35 11 12 13 14 15 16 17 18 .150 (3.81) .150 (3.81) .150 (3.81) 51 Contacts 37 Contacts 31 Contacts 37 38 39 40 41 42 43 44 45 46 47 48 20 21 22 23 24 25 26 27 28 29 30 31 32 33 2 .050 (1.27) 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 27 28 29 30 31 32 33 1 2 3 4 5 6 7 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 .150 (3.81) 100 Contacts NOTE: Standard lead termination is #24 AWG, gold plated, solid copper, solder or tin dripped. Part Number By Shell Size MDM-9PBR* MDM-9SBR* MDM-15PBR* MDM-15SBR* MDM-21PBR* MDM-21SBR* MDM-25PBR* MDM-25SBR* MDM-31PBR* MDM-31SBR* MDM-37PBR* MDM-37SBR* MDM-51PBR* MDM-51SBR* MDM-100PBR* MDM-100SBR* A Max. 1.390 (35.31) 1.390 (35.31) 1.540 (39.12) 1.540 (39.12) 1.690 (42.93) 1.690 (42.93) 1.790 (45.47) 1.790 (45.47) 2.040 (51.82) 2.040 (51.52) 2.340 (59.44) 2.340 (59.44) 1.875 (47.63) 1.875 (47.63) 2.74 (69.72) 2.74 (69.72) B .007 (.18) 1.150 (29.21) 1.150 (29.21) 1.300 (33.02) 1.300 (33.02) 1.450 (36.83) 1.450 (36.83) 1.550 (39.37) 1.550 (39.37) 1.800 (45.72) 1.800 (45.72) 2.100 (53.34) 2.100 (53.34) 1.600 (40.64) 1.600 (40.64) 2.500 (63.50) 2.500 (63.50) All Termination Configurations .100 (2.54) x .100 (2.54) Grid Pattern, Offset .050 (1.27). C .005 (.13) .565 (14.35) .565 (14.35) .715 (18.16) .715 (18.16) .865 (21.97) .865 (21.97) .965 (24.51) .965 (24.51) 1.115 (28.32) 1.115 (28.32) 1.265 (32.13) 1.265 (32.13) 1.215 (30.86) 1.215 (30.86) 1.800 (45.72) 1.800 (45.72) D Max. .334 (8.48) .402 (10.21) .484 (12.29) .552 (13.97) .634 (16.10) .702 (17.83) .734 (18.64) .802 (20.37) .884 (22.45) .952 (24.18) 1.034 (26.26) 1.102 (27.99) .984 (24.99) 1.052 (26.72) 1.384 (35.15) 1.508 (38.10) E Max. F Max. .185 (4.70) .253 (6.43) .185 (4.70) .253 (6.43) .185 (4.70) .253 (6.43) .185 (4.70) .253 (6.43) .185 (4.70) .253 (6.43) .185 (4.70) .253 (6.43) .228 (5.79) .296 (7.52) .271 (6.88) .394 (10.01) .455 (11.56) .455 (11.56) .455 (11.56) .455 (11.56) .455 (11.56) .455 (11.56) .455 (11.56) .455 (11.56) .455 (11.56) .455 (11.56) .455 (11.56) .455 (11.56) .565 (14.35) .565 (14.35) .755 (19.18) .755 (19.18) G Max. .308 (7.82) .308 (7.82) .308 (7.82) .308 (7.82) .308 (7.82) .308 (7.82) .308 (7.82) .308 (7.82) .308 (7.82) .308 (7.82) .308 (7.82) .308 (7.82) .351 (8.92) .351 (8.92) .394 (10.01) .394 (10.01) *For jackpost, add letter "P" or "M7" for sizes 9-51, "M17" for size 100. Dimensions shown in inch (mm) Specifications and dimensions subject to change www.ittcannon.com 20 Micro-D PCB - .050" Contact Spacing MDM-PCB CBR (Condensed Board Right Angle) Series LAST CAV. JACKPOST 2-56 UNC-2B TYP. (Size 9-51) A C .109 .015 (2.77 0.38) + D + .186 (4.72) MAX.PLUG .198 (5.03) MAX. RECEPT. CAV. #1 B .185 (4.70)MAX. H G F E JACKPOST #4-40 UNC 2B TYP. C H H G G F .096 .005 (2.44 0.31) DIA.TYP. (Size 9-51) SEE VIEW X SEE VIEW Y F .125 .005 (3.18 0.31) DIA. TYP. ** * * FOR 31: 1.085(27.56) MAX. FOR 37: 1.185(30.10) MAX. FOR 51: 1.225(31.12) MAX. 1.815 (46.10) MAX. SEE VIEW W 100 VIEW PCB Termination Arrangements (Viewed from bottom of connector, PCB solder side.) Identification number shown for plug connector, use reverse order for socket connector. .108 (2.73) .083 (2.11) 5 4 9 2 8 .100 (2.54) TYP. 7 3 .020 (0.51) 1 7 8 15 5 6 14 4 12 13 3 11 1 10 10 15 Contacts View X 21 20 .083 (2.11) 6 8 9 11 9 6 9 Contacts View X .083 (2.11) .020 (0.51) 2 7 19 5 .050 (1.27) TYP. 4 17 18 3 16 1 14 15 .020 (0.51) 13 10 11 12 2 13 24 25 12 8 5 7 21 20 23 19 .158 (4.00) 15 16 13 14 30 .020 (0.51) 29 31 11 12 28 27 9 10 8 24 25 26 6 7 23 4 5 21 22 2 3 19 20 19 1 18 17 37 18 .020 (0.51) 36 17 15 16 35 13 14 33 34 32 12 31 30 11 10 29 7 9 5 8 28 6 26 27 25 3 4 .020 (0.51) 25 Contacts View X 21 Contacts View X 24 22 23 15 17 1 18 2 35 20 16 34 21 51 50 13 14 33 32 48 28 43 45 47 8 6 7 9 10 29 46 30 49 27 11 12 31 26 42 44 40 4 5 25 41 39 2 3 24 25 1 23 22 38 36 50 All Termination Configurations .100 (2.54) x .100 (2.54) Grid Pattern, Offset .050 (1.27). Part Number By Shell Size MDM-9PCBR* MDM-9SCBR* MDM-15PCBR* MDM-15SCBR* MDM-21PCBR* MDM-21SCBR* MDM-25PCBR* MDM-25SCBR* MDM-31PCBR* MDM-31SCBR* MDM-37PCBR* MDM-37SCBR* MDM-51PCBR* MDM-51SCBR* MDM-100PCBR* MDM-100SCBR* A Max. .785 (19.94) .785 (19.94) .935 (23.75) .935 (23.75) 1.085 (27.56) 1.085 (27.56) 1.185 (30.10) 1.185 (30.10) 1.335 (33.91) 1.335 (33.91) 1.485 (37.72) 1.485 (37.72) 1.435 (36.45) 1.435 (36.45) 2.170 (55.12) 2.170 (55.12) B .005 (.13) .565 (14.35) .565 (14.35) .715 (18.16) .715 (18.16) .865 (21.97) .865 (21.97) .965 (24.51) .965 (24.51) 1.115 (28.32) 1.115 (28.32) 1.265 (32.13) 1.265 (32.13) 1.215 (30.86) 1.215 (30.86) 1.800 (45.72) 1.800 (45.72) C Max. .334 (8.48) .402 (10.21) .484 (12.29) .552 (13.97) .634 (16.10) .702 (17.83) .734 (18.64) .802 (20.37) .884 (22.45) .952 (24.18) 1.034 (26.26) 1.102 (27.99) .984 (24.99) 1.052 (26.72) 1.384 (35.15) 1.508 (38.10) D Max. .308 (7.82) .308 (7.82) .308 (7.82) .308 (7.82) .308 (7.82) .308 (7.82) .308 (7.82) .308 (7.82) .308 (7.82) .308 (7.82) .308 (7.82) .308 (7.82) .351 (8.92) .351 (8.92) .394 (10.01) .394 (10.01) *For jackpost, add letter "P" or "M7" for sizes 9-51, "M17" for size 100. Dimensions shown in inch (mm) Specifications and dimensions subject to change www.ittcannon.com 21 47 48 73 74 100 99 97 70 96 95 15 14 68 94 92 41 42 69 67 93 13 16 43 46 44 71 72 98 17 18 45 .275 (6.98) 40 65 66 90 91 38 89 86 87 59 60 3 83 2 29 27 30 55 56 82 1 4 31 32 57 58 84 85 5 6 33 36 34 61 62 88 8 10 37 35 63 64 7 9 11 12 39 80 81 28 53 54 78 79 52 76 .100 .005 (2.54 0.13) 77 100 Contacts View W 51 Contacts View Y 37 Contacts View Y 31 Contacts View Y 20 49 75 .108 (2.73) 21 19 22 51 .050 (1.27) 20 37 23 24 26 21 19 14 16 18 1 15 17 .325 (8.26) .183 (4.65) 2 3 4 6 9 22 NOTE: Standard lead termination is #24 AWG, solid copper, solder or tin dripped. E Max. .185 (4.70) .253 (6.43) .185 (4.70) .253 (6.43) .185 (4.70) .253 (6.43) .184 (4.70) .253 (6.43) .185 (4.70) .253 (6.43) .185 (4.70) .253 (6.43) .228 (5.79) .296 (7.52) .271 (6.88) .394 (10.01) F Max. .420 (10.67) .420 (10.67) .420 (10.67) .420 (10.67) .420 (10.67) .420 (10.67) .420 (10.67) .420 (10.67) .520 (13.21) .520 (13.21) .520 (13.21) .520 (13.21) .650 (16.15) .650 (16.15) 1.000 (25.40) 1.000 (25.40) G .010 (.25) .250 (6.35) .250 (6.35) .250 (6.35) .250 (6.35) .250 (6.35) .250 (6.35) .250 (6.35) .250 (6.35) .250 (6.35) .250 (6.35) .250 (6.35) .250 (6.35) .300 (7.62) .300 (7.62) .400 (10.16) .400 (10.16) H .010 (.25) .230 (5.81) .230 (5.81) .130 (3.30) .130 (3.30) .130 (3.30) .130 (3.30) .130 (3.30) .130 (3.30) .130 (3.30) .130 (3.30) .130 (3.30) .130 (3.30) .150 (3.81) .150 (3.81) .200 (5.08) .200 (5.08) Micro-D Coaxial/Power - .050" Contact Spacing MDM Coaxial The MDM Metal Shell Connectors have been tooled in several coaxial layouts and offer the versatility of combining coaxial and signal lines in the same connector. Any modifications to these layouts or new requirements, please consult the factory. Standard coax is RG178 white. MDM C/P MDM Power The same insulator that is used with coaxial contacts is available with power contacts. This offers the versatility of combining power and signal lines in the same connector. MDM Coaxial/Power Power and coaxial contacts can be interchanged as desired. Power contacts are rated at 13 amps, 24V rms, AWG #16 stranded. How to Order For 83513-Style ordering information see pages 16 and 17 R MDM - 51 P H 001 P - XXX RoHS COMPLIANCE SERIES MDM: (Size 9-100) Liquid Crystal Polymer (LCP) MDM: (Combo Layout) Diallyl Phthalate (DAP) SERIES CONTACT ARRANGEMENTS CONTACT TYPE CONTACT ARRANGEMENTS TERMINATION TYPE 9-15-21-25-31-37-51-100 (standard) 16C5, 10C10, 7C2, 24C4 (coaxial) TERMINATION CODE 16P5, 10P10, 7P2, 24P4 (power) or combination of HARDWARE coax and power SHELL FINISH MOD CODES CONTACT TYPE P - Pin S - Socket F - Float mount B - No hardware standard TERMINATION TYPE .091 (2.31) dia. hole for sizes 9-51; H - Harness-insulated wire. .120 (3.05) dia. hole for size 100. L - Solid-uninsulated wire. A - .125 (3.18) dia. mounting holes for sizes 9-51; S - Solder pot to accept #26 AWG MAX. .166 (4.22) dia. hole for size 100. harness wire. (Not available with power B1 - .1475 (3.75) dia. hole for size 100 contact arrangements.) (Per 83513-Style) } HARDWARE M - Military specification hardware, see page 11 for military hardware codes. P - Jackpost K - Jackscrew-standard profile L - Jackscrew-low profile TERMINATION CODE* (H) 001 - 18",7/34 strand,#26 AWG, MIL-W-16878/4, Type E Teflon, yellow. (H) 003 - 18", 7/34 strand, #26 AWG, MIL-W-16878/4, Type E Teflon, color coded to MIL-STD-681 System I. (L) 1 - 1/2" uninsulated solid #25 AWG gold plated copper. (L) 2 - 1" uninsulated solid #25 AWG gold plated copper. SHELL FINISH MOD CODES No Number - (Standard cadmium/yellow chromate over nickel A174 - Electroless nickel A172 - Gold over nickel A141 - Irridite/alodine A30 - Black anodize *See page 79 and 81 for additional Termination codes. 7C2/7P2 .186 (4.92) MAX. 1.185 (30.10) MAX. 308 (7.82) MAX .965 .005 (24.51 0.13) + .965 .005 (24.51 0.13) .416 (10.57) MAX. + .308 (7.82) MAX. .100 (2.54) MAX. .091 .003 DIA. (2.31 0.08) .199 (5.05) MAX. 1.185 (30.10) MAX. .800 (20.32) MAX. Plug + + .091 .003 DIA. (2.31 0.08) .429 (10.90) MAX. Receptacle .100 (2.54) MAX. .800 (20.32) MAX. 24C4/24P4 .186 (4.92) MAX. 1.435 (36.45) MAX. 1.215 .005 (30.86 0.13) .351 (8.92) MAX. + 1.215 .005 (30.86 0.13) .351 (8.92) MAX. + .091 .003 DIA. (2.31 0.08) .199 (5.05) MAX. 1.435 (36.45) MAX. .416 (10.51) MAX. .100 (2.54) MAX. 1.050 (26.67) MAX. + + .091 .003 DIA. (2.31 0.08) Plug .429 (10.90) MAX. Receptacle Power Contacts .100 (2.54) MAX. 1.050 (26.67) MAX. Coaxial Contacts BACK POTTING REQUIRED .350 (8.89) MAX. Plug Receptacle Receptacle Plug Dimensions shown in inch (mm) Specifications and dimensions subject to change www.ittcannon.com 22 Microminiature Connectors Hermetic-MDMH MDMH connectors are ideal for applications requiring a better seal than can be achieved with epoxy resins. The connector utilizes size 24 AWG contacts that are compression glass sealed through a steel shell and into a diallyl pthalate front end insulator. An interfacial seal provides environmental protection when mated. We recommend MDMH receptacles be soldered to the chassis or container for a completely leak-proof joint. MDMH receptacles mate with standard MDM plugs. Features * Hermetically sealed connector designed for those applications where a vacuum, inert gas or a constant controlled pressure are required to eliminate adverse effects created by atmospheric changes. * Steel shells to provide greater strength, prevent chipping, cracking or breaking, offer electro-magnetic (EMI) and RFI shielding. * Silicone elastomer compression interfacial seal to provide a moisture and humidity seal between each contact and between contacts and shell. Specifications Standard materials & finishes Shell Insulator Contacts Hermetic seal Leak rate ELECTRICAL DATA No. of contacts Dielectric withstanding voltage Insulation resistance Wire size Contact termination MECHANICAL FEATURES Size or length Service class Coupling Polarization Contact spacing Shell style Mild steel, tin-lead plated Glass filled diallyl phthalate per MIL-M-14. Type SDGF Copper alloy, gold plated sockets on mild steel gold plated pins. Solder pots - mild steel gold plated Compression glass 1 micron cubic ft/hr max (1.04 x 10-5 cc/sec at 1 ATM pressure differential) 9 to 100 150 VAC 5000 Mohm minimum #26 through #30 AWG Solder pot 8 sizes Hermetically sealed Friction/jacks Keystone shaped shells .050 (1,27) centers Receptacle, solder mount How to Order MDMH - 51 Hermetic Micro D Receptacle Series Contact layout 9, 15, 21, 25, 31, 37, 51, 100 Socket Contacts (only) Termination type Dimensions shown in inch (mm) Specifications and dimensions subject to change www.ittcannon.com 23 S S Microminiature Connectors Hermetic-MDMH Contact Arrangements Face vew of socket insert - use reverse order for wiring side. 5 4 9 3 8 2 7 1 8 6 7 6 5 4 3 15 14 13 12 11 10 9 Contacts 2 11 1 10 9 8 7 6 5 4 3 2 7 6 5 4 3 2 13 12 11 10 9 1 21 20 19 18 17 16 15 14 13 12 9 25 19 18 17 16 15 14 13 12 11 10 1 9 8 7 6 5 8 7 6 5 4 3 2 1 24 23 22 21 20 19 18 17 16 15 14 21 Contacts 15 Contacts 16 15 14 13 12 11 10 9 8 25 Contacts 4 3 2 18 17 16 15 14 13 12 11 10 1 9 8 7 6 5 4 3 2 1 35 34 33 32 31 30 29 28 27 26 25 24 23 22 21 20 19 37 36 35 34 33 32 31 30 29 28 27 26 25 24 23 22 21 20 31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 51 50 49 48 47 46 45 44 43 42 41 40 39 38 37 36 37 Contacts 31 Contacts 1 2 3 4 5 6 7 8 51 Contacts 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 100 Contacts Contact identification numbers are for reference only and do not appear on insulator or connector body. Shell Dimensions 6,61 (.260) MAX A B F 4,58 (.180) MAX D 2 HOLES G E 2-56 UNC (9-51 WAY) 4-40 UNC (100 WAY) 5,06 (.199) MAX 1,93 (.076) MAX C Part Number by shell size A max B max C max D max E max F .005 (0,13) G max MDMH-9S .885 (22,48) .738 (18,74) .400 (10,16) .270 (6,86) .430 (10,92) .565 (14,35) .261 (6,63) MDMH-15S 1.035 (26,29) .888 (22,55) .550 (13,97) .270 (6,86) .430 (10,92) .715 (18,16) .261 (6,63) MDMH-21S 1.185 (30,10) 1.038 (26,36) .770 (17,78) .270 (6,86) .430 (10,92) .865 (21,97) .261 (6,63) MDMH-25S 1.285 (32,64) 1.137 (28,87) .800 (20,32) .270 (6,86) .430 (10,92) .965 (24,51) .261 (6,63) MDMH-31S 1.435 (36,45) 1.288 (32,72) .950 (24,13) .270 (6,86 .430 (10,92) 1.115 (28,32) .261 (6,63) MDMH-37S 1.585 (40,26) 1.438 (36,53) 1.100 (27,94) .270 (6,86) .430 (10,92) 1.265 (32,13) .261 (6,63) MDMH-51S 1.535 (38,99) 1.388 (35,26) 1.050 (26,67) .310 (8,00) .473 (12,01) 1.215 (30,86) .315 (8,00) MDMH-100S 2.275 (57,78) 2.078 (52,78) 1.455 (36,97) .365 (9,27) .522 (13,26) 1.800 (45,72) .410 (10,41) Dimensions shown in inch (mm) Specifications and dimensions subject to change www.ittcannon.com 24 Microminiature Connectors Filter-TMDM With an increasing number of MDM connectors being used in avionics and military equipment and with increasing emphasis being put on EMI, RFI and EMP shielding, Cannon have developed a range of filter connectors to suit most applications. Features The TMDM receptacle accommodates from 8 to 37 sizes, 24 AWG socket contacts on 1,27 (.050) centres and mates with the standard MDM plugs. * Transverse monolith filter for EMI and RFI shielding. * Rugged aluminum one piece shell. * Silicone interfacial environmental seal. * Glass filled diallyl phthalate insulator. * A variety of filter types for each pin. Specifications Standard materials & finishes Shell Insulator Contact, socket Interfacial seal ELECTRICAL DATA No. of contacts Dielectric withstanding voltage Insulation resistance Voltage rating (working) Current rating Maximum capacitance Filter type MECHANICAL FEATURES Size or length Coupling Polarization Contact spacing Shell style Aluminum alloy per QQ-A-200/8 with electroless nickel finish per QQ-N-290 Glass filled diallyl phthalate per MIL-M-14. Type SDGF Copper alloy, 50 microinch gold per MIL-G-45204, Type ll, Class l Silicone base rubber 9 to 37 300 VAC 5000 Mohm at 100 VDC 100 VDC 3 amps max. 250, 500, 1000, 2000 picofarads C 6 sizes Friction/jackscrews Keystone shaped shell .050 (1,27) centers Single piece receptacle How to Order TMDM - C1 15 S H 001 B- Series Filter type Number of contacts Contact style Termination type Termination/modifier code Mounting code Modification code Series: Filter TMDM - Micro "D" - Metal housing Filter type: "C" capacitor type C1 150 - 250 pF capacitance 300 - 500 pF capacitance C2 C3 700 - 1000 pF capacitance C4 1300 - 2000 pF capacitance Number of contacts: 9, 15, 21, 25, 31, 37 only Contact style: S - socket (receptacle) P - Pin (plug) Termination type: H - harness, insulated solid or stranded wire L - lead, solid uninsulated wire Termination: Consult standard wire termination code for lead material and lead length Mounting code: A - Flange mounting, O.125 (3,18) mounting holes B - Flange mounting, O.092 (2,34) mounting holes L - Low profile (slotted head) M2 - Allen head jackscrew assembly, Dimensions shown in inch (mm) Specifications and dimensions subject to change www.ittcannon.com 25 low profile M3 - Allen head jackscrew assembly, high profile M5 - Slot head jackscrew assembly, low profile M6- Slot head jackscrew assembly, high profile M7 - Jacknut assembly P - Jackpost Modification code: Shell finish MOD. Codes. * To be assigned as required * No number = Standard tin/lead finish * Microminiature Connectors Filter-TMDM Guaranteed Minimum Attenuation Filter designation Capacitance range (pF) C1 150 - 250 C2 300 - 500 C3 700 - 1000 C4 1300 - 2000 10 MHz 5 15 MHz 30 MHz Minimum Insertion Loss-decibels 50 MHz 100 MHz 200 MHz 500 MHz 1 GHz 4 6 15 20 35 3 6 12 18 25 40 3 7 13 17 25 38 48 8 13 18 23 30 40 50 Standard Wire Termination Codes Cannon Modification Codes - (Not Mil Spec) The following termination codes are listed for your information. For additional codes please refer to Appendix on page 79 and 81. All wire lengths are minimum. Harness Type (H) #26 AWG per MIL-W-16878/4 Type E Teflon, stranded Length (76.2) 3 6 (152.4) 8 (203.2) 10 (254.0) 12 (304.8) 18 (457.2) 20 (508.0) 24 (509.6) 30 (762.0) 36 (914.4) 48 (1219.2) 72 (1828.8) 120 (3048.0) All Yellow H020 H019 H026 H029 H028 H001 H038 H009 H010 H011 H013 H017 H042 Solid Uninsulated Type (L) #25 AWG gold plated copper. Code L61 L56 L57 L39 L58 L1 L14 L2 L7 L6 L6 L10 Color Coded H027 H016 H034 H025 H002 H003 H023 H004 H005 H006 H048 H046 H041 Length .125 (.18) .150 (3.81) .190 (4.83) .250 (5.35) .375 (9.52) .500 (12.70) .750 (19.05) 1.000 (25.40) 1.500 (38.10) 2.000 (50.80) 2.500 (63.50) 3.000 (76.20) Shell Dimensions A F B E G D 7,60 10,90 (.299) (.500)* MAX MAX 5,06 (.199) MAX 2 HOLES O2,32 (.091) 0,08 (.003) Part Number by shell size A max B max C *.750 max for pre-wired versions (H modifier above) C max D max E max F max 0,13 (.005) G max MDMT-9S* .785 (19,94) .400 (10,16) .400 (10,16) .270 (6,86) .308 (7,83) .565 (14,36) .251 (6,38) MDMT-15S* .935 (23,75) .550 (13,97) .550 (13,97) .270 (6,86) .308 (7,83) .715 (18,17) .251 (6,38) MDMT-21S* 1.085 (27,60) .700 (17,78) .700 (17,78) .270 (6,86) .308 (7,83) .865 (21,98) .251 (6,38) MDMT-25S* 1.185 (30,10) .800 (20,32) .800 (20,32) .270 (6,86) .308 (7,83) .965 (24,52) .251 (6,38) MDMT-31S* 1.335 (33,90) .950 (24,13) .950 (24,13) .270 (6,86) .308 (7,83) 1.115 (28,30) .251 (6,38) MDMT-37S* 1.485 (37,70) 1.100 (28,00) 1.100 (28,00) .270 (6,86) .308 (7,83) 1.265 (32,20) .251 (6,38) Dimensions shown in inch (mm) Specifications and dimensions subject to change www.ittcannon.com 26 Microminiature Connectors Filter-TMDM Typical Filter Performance 70 1300-2000 pF 60 ATTENUATION (dB) 700-1000 pF 50 40 300-500 pF 30 150-250 pF 20 10 0 1 10 100 FREQUENCY (MHz) Dimensions shown in inch (mm) Specifications and dimensions subject to change www.ittcannon.com 27 1000 Micro-D Plastic Shell - .050" Contact Spacing Microminiature Rectangular Connectors with MICRO-Pin Contacts on .050 (1.27) centers. MICRO-D microminiature rack/panel connectors are used in applications requiring highly reliable, extremely small, lightweight connectors. These connectors are available in 2 insulator materials, 2 mounting variations, 7 shell sizes accommodating from 9 to 51 contacts and a special arrangement of 5 micro contacts and 2 coaxials. The insulator materials listed give the MICRO-D connector wide versatility in most applications required by industry. MD** ITT can also terminate a wide variety of stranded or solid wire directly to MICRO-D contacts, which is often desirable in high density arrangements. * Glass-filled diallyl phthalate thermoset material used in high temperature applications that is immune to cleaning solvents. It also has excellent dielectric properties. Temperature range: -65F to +300F (-55C to +149C). MICRO-D connectors can also be custom harnessed to meet any customer requirement of single or multiple connectors. Pigtail lead and harness description must be given by the customer. A typical description would be: .5" #25 AWG, gold plated copper leads or 18" of #26 yellow, Teflon-insulated, Type E wire. Shown below are various methods of termination. Consult customer service for any routine or complex harnessing of MICRO-D connectors. * Glass-filled polyester thermoplastic that is not affected by cleaning solvents and exhibits excellent dielectric properties. Temperature range: -55F to +257F (-65C to +125C). Specifications MATERIALS AND FINISHES ELECTRICAL DATA Shell/Insulator (One Piece) MD/MDB: Glass-filled thermoset plastic MDV/MDVB: Thermoplastic No of Contacts - 9 to 51: (1 arrangement of 5 contacts and 2 coaxials - for screw mount only) Coaxial Cable Wire Size - RG-178/U (Not available for MD clip mount) - #24 thru #32 AWG Contact Termination - Multi-indent crimp Contacts - Copper alloy, gold plate MECHANICAL FEATURES Size or Length Coupling Polarization Contact Spacing Centers - 7 sizes - Friction/jackscrews - Keystone-shaped shells -.050 (1.27mm) Shell Styles - Plug and receptacle Consult factory for availabilty. How to Order R PCB ordering information - page 30 MD** 1- 9 P H 001 P RoHS COMPLIANCE SERIES-INSULATOR STYLE-MATERIAL CONTACT SPACING CONTACT ARRANGEMENT CONTACT TYPE TERMINATION TYPE TERMINATION CODE LOCKING HARDWARE SERIES-INSULATOR STYLE-MATERIAL MDB - Screw mounting-Diallyl phthalate MDVB - Screw mounting-Polyester CONTACT SPACING 1 - .050 (1.27) centers CONTACT ARRANGEMENT 9-15-21-25-31-37-51. See page 9 CONTACT TYPE P - Pin S - Socket TERMINATION TYPE H - Insulated solid or stranded wire L - Uninsulated solid wire S - Solder pot to accept #26 AWG max. harness wire. TERMINATION CODE See page 79 and 81 for additional codes (H) 001 - 18", 7/34 strand, #26 AWG, MIL-W-16878/4, Type E Teflon, Yellow. (H) 003 - 18", 7/34 strand, #26 AWG, MIL-W-16878/4, Type E Teflon, color coded to MIL-STD-681 System I. (L) 1 - 1/2" uninsulated solid #25 AWG gold plated copper. (L) 2 - 1" uninsulated solid #25 AWG gold plated copper. LOCKING HARDWARE (SCREW MOUNTING ONLY) P - Jackpost K - Jackscrew-standard L - Jackscrew-low profile F - Float mount M - Military specification hardware, see page 13. No designator - No hardware - standard mounting .091 (2.31) hole diameter Dimensions shown in inch (mm) Specifications and dimensions subject to change www.ittcannon.com 28 Micro-D Plastic Shell - .050" Contact Spacing MDB/MDVB Standard Wire Termination Codes The following termination codes are listed for your information. For additional codes please refer to Appendix on page 79 and 81. All wire lengths are minimum. Harness Type (H) Solid Uninsulated Type (L) #26 AWG per MIL-W-16878 Type E Teflon, stranded. Length All Yellow 3 (76.2) 6 (152.4) 8 (203.2) 10 (254.0) 12 (304.8) 18 (457.2) 20 (508.0) 24 (609.6) 30 (762.0) 36 (914.4) 48 (1219.2) 72 (1828.8) 120 (3048.0) * Cavity #1 black H020 H019 H026 H029 H028 H001 H038 H009 H010 H011 H013 H017 H042 #25 AWG Gold Plated Copper Color Coded* Termination Code H027 H016 H034 H025 H002 H003 H023 H004 H005 H006 H048 H046 H041 L61 L56 L57 L39 L58 L1 L14 L2 L7 L6 L16 L10 Length .125 (3.18) .150 (3.81) .190 (4.83) .250 (6.35) .375 (9.52) .500 (12.70) .750 (19.05) 1.000 (25.40) 1.500 (38.10) 2.000 (50.80) 2.500 (63.50) 3.000 (76.20) With Screw Mounting Holes (Conforms to 83513-Style) MDB Glass-filled Diallyl Phthalate Plastic Insulator MDVB Glass-filled Polyester Plastic Insulator B .110 (2.79) MAX. .204 (5.18) MAX. .304 (7.72) MAX. .395 (10.03) MAX. D TWO MTG. HOLES .091 .003 (2.31 0.08) F .100 (2.54) MAX. C R Solder Pot B .185 (4.70) MAX. .200 (5.08) MAX. + + A .154 (3.91) MAX. .285 (7.24) MAX. .375 (9.92) MAX. F D + C .100 (2.54) MAX. .200 (5.08) MAX. + A Solder Pot Part Number by Shell Size MDB1-9P** MDVB1-9P** MDB1-9S** MDVB1-9S** MDB1-15P** MDVB1-15p** MDB1-15S** MDVB1-15S** MDB1-21P** MDVB1-21P** MDB1-21S** MDVB1-21S** MDB1-25P** MDVB1-25P** MDB1-25S** MDVB1-25S** MDB1-31P** MDVB1-31P** MDB1-31S** MDVB1-31S** MDB1-37P** MDVB1-37P** MDB1-37S** MDVB1-37S** MDB1-51P** MDVB1-51P** MDB1-51S** MDVB1-51S** A Max. .788 (20.02) .788 (20.02) .938 (23.82) .938 (23.82) 1.088 (27.64) 1.088 (27.64) 1.188 (30.18) 1.188 (30.18) 1.338 (33.98) 1.338 (33.98) 1.488 (37.80) 1.488 (37.80) 1.438 (36.52) 1.438 (36.52) B Max. .292 (7.42) .380 (9.65) .442 (11.23) .530 (13.46) .592 (15.04) .680 (17.27) .692 (17.58) .780 (19.81) .842 (21.39) .930 (23.62) .992 (25.20) 1.080 (27.43) .942 (23.93) 1.030 (26.16) E C Max. .408 (10.36) .408 (10.36) .588 (14.17) .588 (14.17) .708 (17.98) .708 (17.98) .808 (20.56) .808 (20.56) .958 (24.33) .958 (24.33) 1.108 (28.14) 1.108 (28.14) 1.058 (26.87) 1.058 (26.87) ** Add lead type and length, see Part Number Explanation. *** Weight given is with 1/2", uninsulated solid #25 AWG gold plated copper pigtails. Dimensions shown in inch (mm) Specifications and dimensions subject to change www.ittcannon.com 29 D Max. E Max. .173 (4.39) .173 (4.39) .173 (4.39) .173 (4.39) .173 (4.39) .173 (4.39) .173 (4.39) .173 (4.39) .173 (4.39) .173 (4.39) .173 (4.39) .173 (4.39) .220 (5.59) .220 (5.59) .218 (5.54) .218 (5.54) .218 (5.54) .218 (5.54) .218 (5.54) .218 (5.54) .218 (5.54) .218 (5.54) .218 (5.54) .218 (5.54) .218 (5.54) .218 (5.54) .260 (6.60) .260 (6.60) F .005 .565 (14.35) .565 (14.35) .715 (18.16) .715 (18.16) .865 (21.97) .865 (21.97) .965 (24.51) .965 (24.51) 1.115 (28.32) 1.115 (38.32) 1.265 (32.13) 1.265 (32.13) 1.215 (30.86) 1.215 (30.86) Avg. Weight*** 5% (oz.) 5% (gm.) .026 (0.73) .025 (0.70) .038 (1.10) .035 (1.00) .053 (1.50) .050 (1.40) .063 (1.80) .056 (1.60) .080 (2.30) .073 (2.10) .086 (2.45) .076 (2.15) .109 (3.10) .093 (2.64) E Micro-D Plastic Shell - .050" Contact Spacing MD*B-PCB connectors use standard MD*B all plastic shells and are designed for use with flex circuitry, printed circuit and multi-layer boards. They are easily mounted and soldered and provide high density/high reliability in board-to-board and board-to-cable applications. While being similar to the MDM-PCB connectors, the MD*B-PCB connectors are all plastic, extremely small, and lightweight yet rugged enough for use in the most demanding applications. MD*B-PCB Jackpost mounting for use with locking hardware is also available. If the connectors shown in the catalog do not meet the requirements of your applications, a special shape, size or layout using the basic all plastic shell can be made available. For further technical and applications information, contact customer service. MD*B-PCB connectors are available in seven shell sizes with 9 to 51 contacts in the popular 90 narrow profile PCB termination, with a variety of tail lengths for varying board thickness. How to Order R MD*B - 37 S CBR * L39 - *** RoHS COMPLIANCE SERIES CONTACT ARRANGEMENT CONTACT TYPE TERMINATION TYPE HARDWARE TERMINATION TAIL LENGTH MODIFICATION CODES (Consult Factory) C CONNECTOR SERIES M MDVB, MDB CONNECTOR ARRANGEMENT 9, 15, 21, 25, 31, 51 C CONTACT TYPE S = Socket P = Pin T TERMINATION TYPE CBR = 90 Narrow Profile PCB Terminations H HARDWARE P = Jackpost M7 = Jackposts, M635135-07 No Letter = Less Hardware TERMINATION TAIL LENGTH CODES NONE - .109 (2.77) 0.15 (0.38) Standard L61 - .125 (3.18) L66 - .150 (3.81) L57 - .190 (4.83) - .250 (6.35) L39 L58 - .375 (9.52) T Dimensions shown in inch (mm) Specifications and dimensions subject to change www.ittcannon.com 30 Micro-D Plastic Shell - .050" Contact Spacing MD*B-PCB CBR Series (90 Mounting Narrow Profile) LAST CAV JACKPOST 2-56 UNC-2B TYP. A C .109 + _ .015 _ 0.38) (3.77 + + E + D CAV. #1 B H G F .186 (4.72) PLUG .199 (5.05) RECEPTACLE * * FOR 31: 1.085 (27.56) MAX. FOR 37: 1.185 (30.10) MAX. F G FOR 51: 1.225 (31.12) MAX. H _ .005 .096 + (2.44 + _ 0.31) DIA. TYP 9-15-21-25 VIEW PCB Termination Arrangements (Viewed from bottom of connector, on PCB solder side.) Indentification number shown for plug connector, use reverse order for socket connector. .083 (2.11) .108 (2.73) .100 (2.54) TYP. 7 5 4 2 1 8 15 9 8 3 7 5 6 14 4 12 13 2 3 11 1 10 9 Contacts .083 (2.11) 10 .050 (1.27) TYP. 6 8 9 11 21 9 .020 (0.51) 6 .083 (2.11) .020 (0.51) 20 7 19 5 4 17 18 3 16 2 1 14 15 13 13 24 25 12 10 11 12 .020 (0.51) 8 9 22 5 7 21 20 23 17 19 2 3 4 6 18 1 15 16 14 .020 (0.51) 25 Contacts 21 Contacts 15 Contacts 15 17 .158 (4.00) 15 16 13 14 30 11 12 29 9 10 27 25 8 24 18 6 7 23 4 5 21 .183 (4.65) 2 3 19 1 19 17 17 18 .020 (0.51) 31 28 26 22 20 18 37 .020 (0.51) 31 Contacts 16 35 36 34 15 13 14 33 32 12 31 35 11 10 29 30 7 9 5 3 1 16 34 51 50 8 28 6 26 27 25 4 24 23 13 14 33 32 49 27 11 12 31 30 48 28 47 8 43 45 44 6 7 9 10 29 46 42 26 40 4 5 25 41 2 3 1 23 24 39 38 21 19 22 37 .050 (1.27) 20 36 2 22 .108 (2.73) 20 21 51 Contacts 37 Contacts All Termination Configurations .100 (2.54) x .100 (2.54) Grid Pattern, Offset .050 (1.27) Part Number By Shell Size MD*B-9PCBR* MD*B-9SCBR* MD*B-15PCBR* MD*B-15SCBR* MD*B-21PCBR* MD*B-21SCBR* MD*B-25PCBR* MD*B-25SCBR* MD*B-31PCBR* MD*B-31SCBR* MD*B-37PCBR* MD*B-37SCBR MD*B-51PCBR* MD*B-51SCBR A Max. .788 (20.01) .788 (20.01) .938 (23.82) .938 (23.82) 1.088 (27.63) 1.088 (27.63) 1.188 (30.17) 1.188 (30.17) 1.338 (33.98) 1.338 (33.98) 1.488 (37.79) 1.488 (37.79) 1.438 (36.52) 1.438 (36.52) B .005 (0.13) .565 (14.35) .565 (14.35) .715 (18.16) .715 (18.16) .865 (21.97) .865 (21.97) .965 (24.51) .965 (24.51) 1.115 (28.32) 1.115 (28.32) 1.265 (32.13) 1.265 (32.13) 1.215 (30.86) 1.215 (30.86) C Max. .292 (7.42) .375 (9.52) .442 (11.23) .525 (13.34) .592 (15.04) .675 (17.14) .692 (17.58) .775 (19.68) .842 (21.39) .925 (23.50) .994 (25.25) 1.075 (27.30) .942 (23.93) 1.026 (26.06) D Max. .218 (5.54) .218 (5.54) .218 (5.54) .218 (5.54) .218 (5.54) .218 (5.54) .218 (5.54) .218 (5.54) .218 (5.54) .218 (5.54) .218 (5.54) .218 (5.54) .258 (6.55) .258 (6.55) E Max. .134 (3.40) .218 (5.54) .134 (3.40) .218 (5.54) .134 (3.40) .218 (5.54) .134 (3.40) .218 (5.54) .134 (3.40) .218 (5.54) .134 (3.40) .218 (5.54) .177 (4.50) .258 (6.55) F Max. .420 (10.67) .420 (10.67) .420 (10.67) .420 (10.67) .420 (10.67) .420 (10.67) .420 (10.67) .420 (10.67) .420 (10.67) .420 (10.67) .520 (13.21) .520 (13.21) .550 (13.97) .550 (13.97) * For jackpost locking add letter "P" or "M7". NOTE: Standard lead termination is #24 AWG, solid copper, solder or tin dipped. Dimensions shown in inch (mm) Specifications and dimensions subject to change www.ittcannon.com 31 G .010 (0.25) .250 (6.35) .250 (6.35) .250 (6.35) .250 (6.35) .250 (6.35) .250 (6.35) .250 (6.35) .250 (6.35) .250 (6.35) .250 (6.35) .250 (6.35) .250 (6.35) .300 (7.62) .300 (7.62) H .010 (0.25) .230 (5.84) .230 (5.84) .130 (3.30) .130 (3.30) .130 (3.30) .130 (3.30) .130 (3.30) .130 (3.30) .130 (3.30) .130 (3.30) .130 (3.30) .130 (3.30) .150 (3.81) .150 (3.81) Micro-D Plastic Shell - .050" Contact Spacing MDB Coaxial MDB Coaxial Series with Screw Mounting Holes MDB connectors with two coaxial and five MICROPINTM /MICROSOCKETTM contacts. Crimp-type coaxial contacts accommodate RG-178/U cables. A plastic insertion/extraction tool is supplied with each connector assembly having removable coaxial assembly. How to Order - MDB Coaxial R MDB 1 -7 C2 * S H ** * K RoHS COMPLIANCE SERIES SIGNAL CONTACT SPACING TOTAL CONTACT CAVITIES NUMBER OF COAXIALS COAXIAL TYPE SIGNAL CONTACT TYPE SIGNAL CONTACT LEAD TYPE SIGNAL CONTACT LEAD LENGTH MODIFICATION HARDWARE SERIES Micro-D Coaxial SIGNAL CONTACT SPACING 1 - .050 (1.27) centers TOTAL CONTACT CAVITIES . . . . . . . . . . . . . . . . . . .7 COAXIAL TYPE No Letter - Coaxial assembly installed and nonremovable RO - coaxial assembly ordered serparately RA - Coaxial shipped assembled but uninstalled NUMBER OF COAXIALS. . . . . . . . . . . . . . . . . . . . . 2 SIGNAL CONTACT TYPE P - Pin S - Socket SIGNAL CONTACT LEAD TYPE L - Uninsulated, solid wire H - Insulated, solid or stranded S -Solder pot* SIGNAL CONTACT LEAD LENGTH See Standard Wire Termination Code on page 29. Coaxial cable will be RG-178U unless otherwise specified; length will be same as wire modification. MODIFICATION Consult customer service HARDWARE No letter - No hardware standard mounting. 091 (2.31) hole diameter F - Float K - Jackscrew (standard) L - Jackscrew (low profile) P - Jackpost * Not available with removalbe coax cable type connectors RO and RA. How to Order - Coaxial Cable Assemblies R MD CC S * *** RoHS COMPLIANCE SERIES COAXIAL CABLE CONTACT TYPE COAXIAL CABLE TYPE SERIES MD COAXIAL CABLE CC COAXIAL CABLE LENGTH CONTACT TYPE P - Pin (used with socket side connection) S - Socket (used with pin type connection) COAXIAL CABLE LENGTH See Standard Wire Termination Codes on page 29. Coaxial cable will be RG-178U unless otherwise specified; length will be the same as wire modfication. COAXIAL CABLE TYPE 1 - RG178/U Dimensions shown in inch (mm) www.ittcannon.com 32 Micro-D Plastic Shell - .050" Contact Spacing MDB Coaxial Dimension - MDB Coaxial Series (See page 9 for layouts) A TWO MTG. HOLES Plug .190 (4.83) Max. B .091 +_ .003 (2.31 +_ 0.08) DIA. C E + + E1 .250 (6.35) MAX. EXTENSION FOR RO AND RA COAXES D 1.000 (25.40) MAX. Receptacle .625 (15.88) MAX. A TWO MTG. HOLES .190 (4.83) Max. B .091 +_ .003 (2.31 +_ 0.08) DIA. C E + + E1 .250 (6.35) MAX. EXTENSION FOR RO AND RA COAXES D 1.000 (25.40) MAX. D E C B A Part Number _ .005 (0.13) + Max. Max. Max. Max. by Shell Size MDB1-7C2P* .204 (5.18) .298 (7.57) .782 (19.86) .395 (10.03) .510 (12.95) MDB1-7C2S* .185 (4.70) .279 (7.09) .782 (19.86) .375 (9.52) .602 (15.29) * Add lead type and length, see Part Number Explanation. ** Weight given is with 7 inch (177.80) insulated leads, #26 AWG silver plated copper pigtails and RG178/U coaxials. Dimensions shown in inch (mm) Specifications and dimensions subject to change www.ittcannon.com 33 .625 (15.88) MAX. E1 Max. .510 (12.95) .540 (13.72) Avg. Weight** _ 5% (gm.) + _ 5% (oz) + .290 (8.30) .273 (7.80) Micro-D Plastic Shell - .050" Contact Spacing MD Mounting Hardware Views (Sizes 9-51) This hardware supplied unassembled. LOCK SCREW RETAINING CLIP MATING FACE .408 (10.36) MAX. .182 (4.62) MAX. .688 (17.48) MAX. #2-56 UNC-2B .185 (4.70) MAX. CONNECTOR SHOWN FOR REF. ONLY PANEL REF. BUSHING Screw Lock Assembly .500 (12.7) MAX. .232 (5.89) MAX. .093 (2.36) RECOMMENDED PANEL THICKNESS #2-56 UNC-2A Jackpost - (P) .052 Screw Lock Assembly* .096 .005 (2.44 0.13)DIA. (1.32) TYP. .170 (4.32) MAX. .178 .005 (4.52 0.13) #2-56 UNC-2B THD .260 (6.60) MAX. 90 Angle Mounting Bracket B A 90 Angle Mounting Bracket *NOTE: Torque value is 4.0 in/lbs max. Description Screw Lock Assembly Jackpost Kit Mounting Bracket, 90 AngleMD*1 for 9 thru 37 Shell Sizes A .005 (0.13) B Max. 015-9516-000 .100 (2.54) .215 (5.46) 015-9516-000 .122 (3.10) .257 (6.53) Part Number 322-9500-000 320-9505-000 MD*1 for 51 Shell Size NOTES: Screw lock assembly (322-9500-000) can be used for front front mounting. Jackpost kit (320-9505-000) consists of 2 assemblies, shipped unassembled. This hardware is factory installed. MATING FACE .014 + _ .004 (0.36 + _ 0.10) ALLOWABLE DIAMETRAL FLOAT .020 (0.51) MAX. ALLOWABLE AXIAL FLOAT .185 (4.70) MAX .150 + _ .003 CONNECTOR SHOWN FOR REF ONLY CONNECTOR SHOWN FOR REF. ONLY HEX HEAD .050 (1.27) ACROSS FLATS .050 (1.27) DEEP (REF) .490 (12.45) MAX (3.81 + _ .076) .155 (3.94) MAX. .093 (2.36) REF. .090 + _ .0015 (2.29 + _ 0.038)DIA Float Mount - (F) .031 + _ .003 (0.79 + _ 0.08) MATING FACE #2-56 UNC-2A PART HAS A .040 (1.02) MAX AXIAL FLOAT Jackscrew - (K) Standard Shown here is a cutaway view of the float mount for the MD connector. The basic shell dimensions are the same for the float mount and the screw mounting hole configurations. View shown is for standard float mount front panel mounting. Reverse mounting is available on request. MATING FACE PART HAS A .040 (1.02) MAX. AXIAL FLOAT #2-56 UNC-2A Jackscrew - (L) Low Profile * NOTE: Torque values are as follows: Low Profile Jackscrew (L)-2.5 in/lbs Standard Jackscrew (K)-2.5 in/lbs Dimensions shown in inch (mm) Specifications and dimensions subject to change www.ittcannon.com 34 Micro-D Plastic Shell - .050" Contact Spacing MD Mounting Hardware to Military Specification (Sizes 9 - 51) PER 83513/5-Style This hardware supplied unassembled. PLUG (REF. WITH .092 (2.34) DIA. MOUNTING HOLES #2-56 UNC-2A THREAD TYP. #2-56 UNC-2A THREAD TYP. PLUG (REF.) WITH .092 (2.34) DIA. MOUNTING HOLES .125 (3.18) HEX #2-56 UNC-2B Thread .190 (4.83) +_ .185 (4.70) .010 (0.25) TH'K (REF.) .361 (9.17) MAX. .010 (0.25) TH'K (REF.) .062 (1.57) HEX. (REF.) .475 (12.06) 0.25 (0.64) .062 (1.57) .010 (0.25) POTTING WELL (REF.) POTTING WELL (REF.) Jackscrew - (L) Low profile * LOCK WASHER RETAINING NUT .154 (3.91) HEX. Allen head Optional Head Configuration Plug and Receptacle Jackscrew - (K) High Profile Low and High Profile Slotted Head Description # 2-56 UNC-2A Thread Jackpost Assembly Mode Code M83513/5-Style Slotted Head Jackscrew Assy Low Profile Slotted Head Jackscrew Assy High Profile Allen Head Jackscrew Assy Low Profile Allen Head Jackscrew Assy High Profile Jackpost Assy -05 -06 -02 -03 -07 Part Number M5 M6 M2 M3 M7 320-9508-025 320-9508-027 320-9508-026 320-9508-028 320-9505-033 Jackpost Bushing (For Rear Panel Mounting) HEX IS .135 (3.431/.115 (2.92) ACROSS FLATS .170 (4.32) .185 (4.70) #2-56 UNC 2B THD + .005 (0.13) - .000 (0.00) R TYP. .075 (1.91) MATING FACE C A .126 (3.20) .125 (3.18) DIA.TYP. A + B + .500 (12.7) .480 (12.19) 27/26TYP #2-56 UNC 2A THD Panel Thickness A Dim. Jackpost Kit Number* 3/32 (2.4) .092/.087 (2.34/2.21) 320-9505-007 1/16 (1.6) .061/.056 (2.34/1.42) 320-9505-006 3/64 (1.2) .047/.042 (1.19/1.07) 320-9505-005 1/32 (0.8) .030/.025 (0.76/0.64) 320-9505-004 *2 Jackposts, 2 nuts, 2 washers. NOTE: Torque value for jackpost 2.5 in/lbs Plug and Receptacle Dimensions Shell Size A +.004 (0.10) -.000 (0.00) B C +.004 (0.10) + _.005 (0.13) -.000 (0.00) 9 .379 ( 9.63) .219 (5.56) .565 (14.35) 15 .529 (13.44) .219 (5.56) .715 (18.16) 21 .679 (17.25) .219 (5.56) .865 (21.97) 25 .779 (19.79) .219 (5.56) .965 (24.51) 31 .929 (23.60) .219 (5.56) 1.115 (28.32) 37 1.079 (27.41) .219 (5.56) 1.265 (32.13) 51 1.029 (26.14) .261 (6.63) 1.215 (30.86) Panel Mounting Dimensions .300 .005 (7.62 0.13) .200 .005 (5.08 0.13) .395 .005 (10.03 0.13) Plug and Receptacle Rear Mounted Plug and Receptacle Front Mounted Dimensions shown in inch (mm) Specifications and dimensions subject to change www.ittcannon.com 35 Plug Front Mounted Receptacle Rear Mounted Micro-D Plastic Shell - .050" Contact Spacing MD Panel Cutouts D TYP. C B FULL R. (TYP.) .015 (0.38)R. MAX.(TYP) A Figure 1 Front Mounting C .075 (1.91) A D + .005 (0.13) R TYP - .000 (0.00) B FULL R. (TYP.) 26/27TYP Figure 2 Rear Mounting C .450 .002 (11.43 0.05) .030 (0.76) TYP. D + + + + FULL R. (TYP.) PANEL REF. Figure 3 Edgeboard Mounting Size 9 15 21 25 31 37 51 Cutout Figure A + .004 (0.10) - .000 (0.00) B + .004 (0.10) - .000 (0.00) C + .005 (0.13) - .000 (0.00) D + .005 (0.13) - .000 (0.00) 1 2 3 1 2 3 1 2 3 1 2 3 1 2 3 1 2 3 1 2 3 .409 (10.39) .379 ( 9.63) .559 (14.20) .529 (13.44) .709 (18.00) .679 (17.25) .809 (20.55) .779 (19.79) .959 (24.36) .929 (23.60) 1.109 (28.17) 1.079 (27.41) 1.059 (26.90) 1.029 (26.14) - .172 (4.37) .219 (5.56) .172 (4.37) .219 (5.56) .172 (4.37) .219 (5.56) .172 (4.37) .219 (5.56) .172 (4.37) .219 (5.56) .172 (4.37) .219 (5.56) .215 (5.46) .261 (6.63) - .570 (14.48) .570 (14.48) .570 (14.48) .720 (18.29) .720 (18.29) .720 (18.29) .870 (22.10) .870 (22.10) .870 (22.10) .970 (24.64) .970 (24.64) .970 (24.64) 1.120 (28.45) 1.120 (28.45) 1.120 (28.45) 1.270 (32.26) 1.270 (32.26) 1.270 (32.26) 1.220 (30.99) 1.220 (30.99) 1.220 (30.99) .089 (2.26) .089 (2.26) .089 (2.26) .089 (2.26) .089 (2.26) .089 (2.26) .089 (2.26) .089 (2.26) .089 (2.26) .089 (2.26) .089 (2.26) .089 (2.26) .089 (2.26) .089 (2.26) .089 (2.26) .089 (2.26) .089 (2.26) .089 (2.26) .089 (2.26) .089 (2.26) .089 (2.26) NOTES: 1. Front mounting (figure 1) and rear mounting (figure 2) accommodates #2-56 screws. 2. Front mounting is preferred. However, when rear mounting is necessary. use detail on previous page. 3. Edgeboard mounting bracket (figure3) uses #2-56 screws. Dimension .450 .002 (11.43 0.05) locates the MD receptacle flush with the end of the board. www.ittcannon.com 36 Micro-D Plastic Shell - .050" Contact Spacing MD/MDV How to Order MD R PCB ordering information - page 30 1- 9 P H 001 P RoHS COMPLIANCE SERIES-INSULATOR STYLE-MATERIAL CONTACT SPACING CONTACT ARRANGEMENT CONTACT TYPE TERMINATION TYPE TERMINATION CODE LOCKING HARDWARE SERIES-INSULATOR STYLE-MATERIAL MD - Clip mounting -Diallyl phthalate MDV - Clip mounting-Polyester CONTACT ARRANGEMENT 9-15-21-25-31*-37-51. See page 7 CONTACT TYPE S - Socket P - Pin CONTACT SPACING 1 - .050 (1.27) centers TERMINATION TYPE H - Insulated solid or stranded wire L - Uninsulated solid wire S - Solder pot to accept #26 AWG max. harness wire. TERMINATION CODE** (H) 001 - 18", 7/34 strand, #26 AWG, MIL-W-16878/4, Type E Teflon, Yellow. (H) 003 - 18", 7/34 strand, #26 AWG, MIL-W-16878/4, Type E Teflon, color coded to MIL-STD-681 System I. (L) 1 - 1/2" uninsulated solid #25 AWG gold plated copper. (L) 2 - 1" uninsulated solid #25 AWG gold plated copper. No designator - No hardware - standard mounting .091 (2.31) hole diameter * Not available in clip mounting. ** See page 79 and 81for additional codes. With Clip Mounting Slots Plug MD Glass-filled Diallyl Phthalate Plastic Insulator MDV Glass-filled Polyester Plastic Insulator B .130 (3.30) MAX. .022 (0.56) MAX. E .093 .005 (2.36 0.13) D .375 (9.52) MAX. .170 (4.32) A .065 (1.65) MAX. .204 (5.18) MAX. C Solder Pot Receptacle B .170 (4.32) MAX. .022 (0.56) MAX. E .093 .005 (2.36 0.13) A D .065 (1.65) MAX. .185 (4.69) MAX. .356 (9.04) MAX. .210 (5.33) C Solder Pot Part Number by Shell Size MD1-9P** MD1-9S** MD1-15P** MD1-15S** MD1-21P** MD1-21S** MD1-25P** MD1-25S** MD1-37P** MD1-37S** MD1-51P** MD1-51S** MDV1-9-P** MDV1-9S** MDV1-15P** MDV1-15S** MDV1-21P** MDV1-21S** MDV1-25P** MDV1-25S** MDV1-37P** MDV1-37S** MDV1-51P** MDV1-51S** A Max. .512 (13.00) .512 (13.00) .662 (16.81) .662 (16.81) .812 (20.62) .812 (20.62) .912 (23.16) .912 (23.16) 1.212 (30.78) 1.212 (30.78) 1.162 (29.51) 1.162 (29.51) ** Add lead type and length, see Part Number Explanation. B Max. .292 (7.42) .376 (9.55) .442 (11.23) .526 (13.36) .592 (15.04) .676 (17.17) .692 (17.58) .776 (19.71) .992 (25.20) 1.076 (27.33) .942 (23.93) 1.026 (26.06) C Max. .405 (10.29) .405 (10.29) .555 (14.10) .555 (14.10) .705 (17.91) .705 (17.91) .805 (20.45) .805 (20.45) 1.105 (28.07) 1.105 (28.07) 1.055 (26.80) 1.055 (26.80) D Max. .170 (4.32) .170 (4.32) .170 (4.32) .170 (4.32) .170 (4.32) .170 (4.32) .170 (4.32) .170 (4.32) .170 (4.32) .170 (4.32) .213 (5.41) .213 (5.41) E Max. .215 (5.46) .215 (5.46) .215 (5.46) .215 (5.46) .215 (5.46) .215 (5.46) .215 (5.46) .215 (5.46) .215 (5.46) .215 (5.46) .258 (6.55) .258 (6.55) *** Weight given is with 1/2", uninsulated solid #25 AWG gold plated copper pigtails. Dimensions shown in inch (mm) Specifications and dimensions subject to change www.ittcannon.com 37 Avg. Weight*** 5% (oz.)/5% (gm.) .026 (0.73) .026 (0.73) .038 (1.10) .035 (1.00) .053 (1.50) .050 (1.40) .063 (1.80) .056 (1.60) .086 (2.45) .076 (2.15) .109 (3.10) .093 (2.65) Micro-D Plastic Shell - .050" Contact Spacing MD** Panel Mounting Hardware Clip Mounting Illustrated is the recommended method of front mounting with metal panel mounting keys. Panel mounting keys are available with or without coupling retention clips. For front mounting, place the rear of the connector thru the panel cutout. With the mounting flange against the panel, fully insert the panel mounting keys thru the slots in the flange and thru the panel cutout. Retaining the keys in this position, bend them outward against the rear of the panel. When mating a front mounted connector with an unmounted connector, a coupling retention clip assembly may be used to securely lock the two together. Mounting screw brackets are available and may be used instead of the panel mounting keys. Description Coupling Retention Clip (see Figure 2) Mounting Screw Brackets (see Figures 1 and 3) Edgeboard Mounted (see Figure 4) Panel Mounting Key Part Number Panel Mounting Key 201-9100-000 Mounting Key and Coupling Clip Assembly 294-9100-000 Mounting Screw Bracket 015-9100-000 015-5009-000 * Edgeboard Mounting Bracket ** Edgeboard Mounting Bracket and MD51428-1 Coupling Clip Assembly * Must be ordered separately; specify left and right hand for complete assembly. ** Must be ordered separately; assembly contains set of left and right hand types. Dimensions (Clip Mounting Only) .330 .005 (8.38 0.13) .200 .005 (5.08 0.13) Plug and Receptacle Rear Mounted Plug and Receptacle Front Mounted .265 .005 (6.73 0.13) Plug Front Mounted Receptacle Rear Mounted Panel Cutouts C D A B A FULL R. (TYP.) B .015 (0.38)R. MAX. (TYP.) .015 (0.38)R. MAX. (TYP.) Figure 1 Figure 2 Front Mounting D C A .075 + .005 - .000 (1.91 + 0.13 _ 0.00) B FULL R. (TYP.) 26/27 TYP. Figure 3 Rear Mounting .018 + .002 - .000 (0.46 + 0.05 - 0.00) A .005 (0.13) MAX. R. (TYP.) B .182 + .004 - .000 (4.62 + 0.10 - 0.00) PANEL REF. Figure 4 Edgeboard Mounting 1. A panel thickness of 1/8" (3.17mm) maximum is recommended for ease of tab bending when a panel mounting key & clip assembly or edgeboard mounting brackets are used. 2. Front mounting is preferred. However, when rear mounting is necessary, use figure 3 for dimensions. 3. Figure 4 is for edge board mounting bracket or edgeboard clip assembly. The .184 +_ .002 (2.67 +_ 0.05) dimension locates the MD socket insulator flush with the end of the board. 4. Screw brackets (015-9100-000) will accommodate #2-56 screws. 5. Front mounting (Figure 1) and rear mounting (Figure 3) accommodate #2-56 screws. A B Shell Cutout + .004 (0.10) + .004 (0.10) Size Figure - .000 (0.00) - .000 (0.00) 1 .408 (10.36) .172 (4.37) 2 .408 (10.36) .172 (4.37) 9 3 .378 ( 9.60) .217 (5.51) 4 .400 (10.16) .091 (2.31) 1 .588 (14.94) .172 (4.37) 2 .588 (14.94) .172 (4.37) 15 3 .528 (13.28) .217 (5.51) 4 .550 (13.97) .091 (2.31) 1 .738 (18.75) .172 (4.37) 2 .738 (18.75) .172 (4.37) 21 3 .678 (17.27) .217 (5.51) 4 .700 (17.78) .091 (2.31) 1 .838 (21.29) .172 (4.37) 2 .838 (21.29) .172 (4.37) 25 3 .778 (19.76) .217 (5.51) 4 .800 (20.32) .091 (2.31) 1 1.138 (28.91) .172 (4.37) 2 1.138 (28.91) .172 (4.37) 37 3 1.078 (27.38) .217 (5.51) 4 1.100 (27.94) .091 (2.31) 1 1.088 (27.64) .215 (5.46) 2 1.088 (27.64) .215 (5.46) 51 3 1.028 (26.11) .260 (6.60) 4 1.050 (26.67) .091 (2.31) C D + .004 (0.10) + .005 (0.13) - .000 (0.00) - .000 (0.00) .650 (16.51) .089 (2.26) .650 (16.51) .089 (2.26) .795 (20.19) .089 (2.26) .795 (20.19) .089 (2.26) .945 (24.00) .089 (2.26) .945 (24.00) .089 (2.26) 1.045 (26.54) .089 (2.26) 1.045 (26.54) .089 (2.26) 1.345 (34.16) .089 (2.26) 1.345 (34.16) .089 (2.26) 1.295 (32.89) .089 (2.26) 1.295 (32.89) .089 (2.26) - Dimensions shown in inch (mm) Specifications and dimensions subject to change www.ittcannon.com 38 Micro Center Jackscrew MJS The MJS jackscrew series provides a reliable interconnect for board-to-board, board-to-cable and in-line cable-to-cable applications. Layouts accommodating up to 76 MICROPIN/MICROSOCKETTM contacts are available, with the same wide range of options as are offered with the other MICRO Line products offered in this catalog. How to Order MJS R * - 26 P H 001 RoHS COMPLIANCE SERIES INSULATOR MATERIAL CONTACT ARRANGEMENT CONTACT TYPE TERMINATION TYPE TERMINATION CODES SERIES MJS - Micro Center Jackscrew CONTACT TYPE TERMINATION CODE* P - Pin S - Socket INSULATOR MATERIAL B - Diallyl phthalate V - Polyester U - Polyetherimide R - Polyphenylene sulfide CONTACT ARRANGEMENTS Unshrounded Receptacle: 10, 26, 51, 66 Shrouded Receptacle; 10, 26, 34, 38, 42, 76 Low Profile Plug and Receptacle (shrouded): 28 (H) 001 TERMINATION TYPE H - Insulated wire harness. I - Integral tail (MJSV-28S only). L - Solid - uninsulated wire. S - Solder pot to accept #26 AWG harness wire. T - Thru bundle pigtail (MJSV-28P only). (H) 003 (L) 1 (L) 2 - 18" , 7/34 strand, #26 AWG, MIL-W-16878/4, Type E Teflon, yellow. - 18", 7/34 strand, #26 AWG, MIL-W-16878/4, Type E Teflon, color coded to MIL-STD-681 System I. - 1/2" uninsulated solid #25 AWG gold plated copper. - 1" uninsulated solid #25 AWG gold plated copper. * See Termination Codes shown below. Standard Wire Termination Codes The following termination codes are listed for your information. For additional codes please refer to Appendix on page 79 and 81. All wire lengths are minimum. Harness Type (H) Solid Uninsulated Type (L) #26 AWG per MIL-W-16878/4 Type E Teflon, 7/34 stranded. Length 3 (76.2) 6 (152.4) 8 (203.2) 10 (254.0) 12 (304.8) 18 (457.2) 20 (508.0) All Yellow H 020 H 019 H 026 H 029 H 028 H 001 H 038 Color Coded H 027 H 016 H 034 H 025 H 002 H 003 H 023 #25 AWG gold plated solid copper. Length 24 (609.6) 30 (762.0) 36 (914.4) 48 (1219.2) 72 (1828.8) 120 (3048.0) All Yellow H 009 H 010 H 011 H 013 H 017 H 042 Color Coded H 004 H 005 H 006 H 048 H 046 H 041 Termination Code L61 L56 L57 L39 L58 L1 Length Termination Code .125 (3.18) .150 (3.81) .190 (4.83) .250 (6.35) .375 (9.53) .500 (12.70) L14 L2 L7 L6 L16 L10 Length .750 (19.05) 1.000 (25.40) 1.500 (38.10) 2.000 (50.80) 2.500 (63.50) 3.000 (76.20) Contact Arrangements Face view of pin-use reverse order for socket 4 6 10 12 14 26 1 5 7 51 Contacts 1 18 35 21 44 66 6 10 16 1 11 19 16 Contacts** 26 Contacts 10 Contacts 17 34 51 1 7 11 1 13 15 1 23 45 28 Contacts** 1 13 23 12 22 34 66 Contacts 34 Contacts MJSV (shrouded) MJSB/MJSU (unshrouded) *Low profile configuration **MJSV & MJSR Identification numbers are for reference only and do not appear on connectors. Dimensions shown in inch (mm) Specifications and dimensions subject to change www.ittcannon.com 39 10 18 28 Micro Center Jackscrew MJS Unshrouded Receptacle (10-26-51-66) MJSB/MJSU .170 .010 (4.32 0.25) POLARIZING PIN (OPTIONAL WITH LOSS OF CONTACT) .126 .005 (3.20 0.13) B .050 (1.27) TYP. 1-64 UNC-2A THREAD 1-64 UNC-2B THREAD C A .145 (3.68) DIA. MAX. .055 (1.40) TYP. .170 (4.32) MAX. .332 (8.43) MAX. .110 MAX. (2.79) Rear View Receptacle UNSHROUDED STANDARD MATERIALS AND FINISHES Micropin Copper alloy, 50 miro-inch gold Microsocket Copper alloy, 50 micro-inch gold Insulator Diallyl phthalate, green color or polyetherimide, natural color Jackscrew Stainless steel, passivated & lubricated Retainer, Jackscrew Stainless steel, passivated Insert, Threaded Stainless steel, passivated Post, Polarizing Stainless steel, passivated Plug A Max. .378 (9.60) .378 (9.60) .778 (19.76) .778 (19.76) 1.028 (26.11) 1.028 (26.11) 1.280 (32.51) 1.280 (32.51) Part Number MJSB or MJSU-10P MJSB or MJSU-10S MJSB or MJSU-26P MJSB or MJSU-26S MJSB or MJSU-51P MJSB or MJSU-51S MJSB or MJSU-66P MJSB or MJSU-66S B Max. .190 (4.83) .190 (4.83) .190 (4.83) .190 (4.83) .260 (6.60) .260 (6.60) .260 (6.60) .260 (6.60) C Bsc. .290 (7.37) .290 (7.37) .690 (17.53) .690 (17.53) .940 (23.88) .940 (23.88) 1.190 (30.23) 1.190 (30.23) Shrouded Receptacle (16-28*-34) MJSV/MJSR A 1-64 UNC-2B THREAD .205 (5.21) MAX. .080 (2.03) .065 (1.65) .285 (7.24) MAX. B D C Face View Plug A .090 .010 (2.29 0.25) 1-64 UNC-2A THREAD .285 (7.24) MAX. B .110 (2.79) MAX. C Face View SHROUDED STANDARD MATERIALS AND FINISHES Micropin Copper alloy, 50 miro-inch gold Microsocket Copper alloy, 50 micro-inch gold Insulator Polyester, black color Polyphenylene sulfide, black color Jackscrew Stainless steel, passivated Retainer, Jackscrew Stainless steel, passivated Insert, Threaded Stainless steel, passivated Post, Polarizing Stainless steel, passivated Receptacle .145 (3.68) DIA. MAX. A B C D Part Number Max. Max. Ref. .006 (0.15) MJSV or MJSR-16P .700 (17.78) .345 (8.76) .545 (13.84) .175 (4.45) MJSV or MJSR-16S .700 (17.78) .320 (8.13) .545 (13.84) MJSV-28P* or MJSR-28P* 1.020 (25.91) .232 (5.89) .865 (21.97) .062 (1.57) MJSV-28S* or MJSR-28S* 1.020 (25.91) .246 (6.25) .865 (21.97) MJSV-34P or MJSR-34P 1.180 (29.97) .330 (8.38) 1.025 (26.04) .160 (4.06) MJSV-34S or MJSR-34S 1.180 (29.97) .305 (7.75) 1.025 (26.04) *Low profile configuration, for "L" (uninsulated solid wire) termination add .090 (2.29) to the "B" dimension. For "H" (insulated wire) termination add .200 (5.08) to the "B" dimension. For special configurations with backpotted standoffs consult factory. Dimensions shown in inch (mm) Specifications and dimensions subject to change www.ittcannon.com 40 Micro Center Jackscrew MJS Shrouded Receptacle (42) MJSR-42P A 1.322 (33.58) REF. .125 (3.18) TYP. .100 (2.54) TYP. CAV. #1 .297 .420 (7.54) (10.67) REF. MAX. + .075 (1.91) TYP. CAV. #31 CAV #42 C .035 (0.89) .015 (0.38) TYP. #1 (.073) - 64 UNC-2B THREADED INSERT B D MJSR-42S A 1.328 (33.73) REF. .125 (3.18) TYP. .100 (2.54) TYP. .075 (1.91) TYP. CAV #1 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + .303 (7.70) REF. + + + .420 (10.67) MAX. CAV. 42 C 1/16 SOCKET HEAD JACKSCREW #1 (.073 - 64 UNC - 2A THREAD .131 (3.33) TYP .121 (3.07) B .145 (3.68) DIA. MAX. Part Number MJSR-42P MJSR-42S A Max. 1.445 (36.70) 1.445 (36.70) STANDARD MATERIALS AND FINISHES Micropin Copper alloy, 50 miro-inch gold Microsocket Copper alloy, 50 micro-inch gold Insulator Polyphenylene sulfide, black color Jackscrew Stainless steel, passivated Retainer, Jackscrew Stainless steel, passivated Insert, Threaded Stainless steel, passivated Dimensions shown in inch (mm) Specifications and dimensions subject to change www.ittcannon.com 41 .108 MAX. (2.74) B Max. .345 (8.76) .357 (9.07) C Ref. 1.250 (31.75) 1.250 (31.75) D .006 (0.15) .142 (3.61) - Micro Center Jackscrew MJS Shrouded Receptacle (76) MJSR-76P A 1.472 (37.39) REF. CAV. #13 CAV. #1 .100 (2.54) TYP. .447 (11.35) REF. + .570 (14.48) MAX. .075 (1.91) TYP. CAV. #76 CAV. #62 C .035 (0.89) .015 (0.38) TYP. #2 (0.86) - 64 UNC-2B THREADED INSERT B D MJSR-76S A 1.478 (37.54) TYP. CAV. #13 CAV. #1 .100 (2.54) TYP. + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + CAV. #62 + + + + + + + + + + + + + C + + + + + + + + + + + + + + + + + + + + + + + + + + + + + .075 (1.91) TYP. .453 (11.51) TYP. .570 (14.48) MAX. CAV. #76 1/16 SOCKET HEAD JACKSCREW #2 (.086 - 64 UNC - 2A THREAD .131 (3.33) TYP .121 (3.07) B .160 (4.06) MAX. Part Number MJSR-76P MJSR-76S A Max. 1.595 (40.51) 1.595 (40.51) B Max. .345 (8.76) .357 (9.07) .150 (3.81) MAX. C Ref. 1.400 (35.56) 1.400 (35.56) D .006 (0.15) .142 (3.61) - STANDARD MATERIALS AND FINISHES Micropin Copper alloy, 50 miro-inch gold Microsocket Copper alloy, 50 micro-inch gold Insulator Polyphenylene sulfide, black color Jackscrew Stainless steel, passivated Retainer, Jackscrew Stainless steel, passivated Insert, Threaded Stainless steel, passivated Dimensions shown in inch (mm) Specifications and dimensions subject to change www.ittcannon.com 42 Micro Center Jackscrew MJS Plug (Molded-In Insert - Special) MJSV**P A MAX. INSERT #1-64 UNC-2B CAVITY # 1 ENGAGING FACE MICRO-PIN CONTACT INSULATOR .100 (2.54) .300 (7.62) MAX. .162 (4.11) REF. LEAD LENGTH .061 (1.55) MAX. .109 (2.77) MAX. DIA. MJSV-26P** (Shown) A Ref. Part Number MJSV-26P** .868 (22.05) MJSV-38P** 1.168 (29.67) Receptacle (Special) MJSV**S* A MAX. .100 (2.54) REF. MICRO-SOCKET #1-64 UNC-2A CAVITY # 1 .253 (6.43) MAX. .167 (4.24) REF. .190 (4.83) REF. .320 (8.13) MAX. .155 (3.94) MAX. B LEAD LENGTH JACKSCREW MJSV-26S** (Shown) A Max. Part Number B Ref. MJSV-26S** .943 (23.95) .874 (22.20) MJSV-38S** 1.243 (31.57) 1.174 (29.82) Contact Arrangements Face view of pin - use reverse order for socket .100 (2.54) .050 (1.27) .075 (1.91) .100 (2.54) REF. .075 (1.91) 14 1 20 1 + + 38 21 26 15 .050 (1.27) TYP. .050 (1.27) TYP. 26 Contacts 38 Contacts Identification numbers are for reference and do not appear on connectors. Dimensions shown in inch (mm) Specifications and dimensions subject to change www.ittcannon.com 43 Microminiature Circular - .050" Contact Spacing Standard MIK connectors are available in two shell sizes accommodating two contact arrangements pre-wired to your specific requirements. MICRO-K microminiature circular connectors are rugged yet lightweight - and are designed to be comparable to MIL-DTL-83513. Applications include biomedical, instrumentation and miniature black boxes. MIK: Accommodate up to 55 contacts on .050 (1.27) centers (equivalent to 420 contacts per square inch). Five keyway polarization prevents cross plugging. The threaded coupling nuts provide strong, reliable coupling. MIK receptacles can be either front or back panel mounted; in back mounting applications, panel thickness of up to 3/32" can be used on the larger sizes. Maximum temperature range - 55C to + 125C. MICRO-K radios, military gun sights, airborne landing systems and medical equipment. Maximum temperature range - 55C to +125C. MIKM: Similar to our MIK, except has a steel shell and receptacle for improved ruggedness and RFI resistance. It accommodates up to 85 twist pin contacts. Maximum temperature range - 55C to + 125 C. MIKQ: A quick disconnect metal shell and receptacle version that can be instantaneously disconnected yet provides a solid lock when engaged. Applications include commercial TV cameras, portable Specifications STANDARD MATERIAL AND FINISHES ELECTRO/MECHANICAL FEATURES MIK MIKM MIKQ Thermoplastic Stainless Steel Brass Stainless Steel Passivated Stainless Steel Passivated Brass, Electroless Nickel Plated* Insulator Glass-reinforced Thermoplastic Glass-reinforced Thermoplastic Glass-reinforced Thermoplastic Contacts 50 Microinch Gold Plated Copper Alloy 50 Microinch Gold Plated Copper Alloy 50 Microinch Gold Plated Copper Alloy Shell Coupling Nut MIK No. of Contacts Wire Size 7,55 #24 AWG thru #32 AWG Contact Termination Crimp Contact Rating 3 Amps Couping Threaded Polarization Keyways Contact Spacing .050 (1.27) Centers Shell Styles 0-Wall Mtg. 6-Straight Plug *For plug only Electrodeposited for receptacle. MIKM MIKQ 7,55, 85 #24 AWG thru #32 AWG Crimp 3 Amps Threaded Keyways .050 (1.27) Centers 0-Wall Mtg. 6-Straight Plug 7,19, 37 #24 AWG thru #32 AWG Crimp 3 Amps Push/Pull Keyways .050 (1.27) Centers 7-Jam Nut 6-Straight Plug 9-Rear Panel Mtg. Receptacle How to Order R MIK M 6- 55 P * ** *** RoHS COMPLIANCE SERIES CONNECTOR TYPE SHELL STYLE CONTACT ARRANGEMENT CONTACT TYPE TERMINATION TYPE TERMINATION LENGTH CODE HARDWARE SERIES MIK: Microminiature Circular CONTACT ARRANGEMENTS 7, 19, 37, 55, 85 CONNECTOR TYPES No Letter - Screw couping, plastic shell M - Screw coupling, metal shell Q - Push/Pull, metal shell CONTACT TYPE P - Pin S - Socket SHELL STYLES 0 - Wall mounting receptacle (MIK and MIKM only) 6 - Straight plug (MIK, MIKM and MIKQ) 7 - Jam nut mount (MIKQ only) 9 - Rear panel mounted receptacle (MIKQ) TERMINATION TYPES H - Insulated round hook-up wire L - Uninsulated round solid wire TERMINATION LENGTH CODE (STANDARDS) (H) 001 18", 7/34 strand, #26 AWG, MIL-W-16878/4, Type E Teflon, yellow. 18",7/34 strand, #26 AWG, (H) 003 MIL-W-16878/4, Type E Teflon, color coded to MIL-STD-681 System I. 1/2" uninsulated solid #25 (L) 1 AWG gold plated copper. 1" uninsulated solid #25 AWG (L) 2 gold plated copper. HARDWARE G - Cable nut and grip (MIKQ plug only) N - Nut only (MIKQ plug only) NOTE: Contact types cannot be interchanged between shell styles. Dimensions shown in inch (mm) Specifications and dimensions subject to change www.ittcannon.com 44 Microminiature Circular - .050" Contact Spacing MIK Standard Wire Termination Codes The following termination codes are listed for your information. For additional codes please refer to Appendix on page 79 and 81. All wire lengths are minimum. HARNESS TYPES (H) #26 AWG per MIL-W-16878 Type E, Teflon Stranded -All Yellow 020 019 026 029 028 001 038 009 010 011 013 017 042 Length 3 (76.2) 6 (152.4) 8 (203.2) 10 (254.0) 12 (304.8) 18 (457.2) 20 (508.0) 24 (609.6) 30 (762.0) 36 (914.4) 48 (1219.2) 72 (1828.8) 120 (3048.0) Color Coded 027 016 034 025 002 003 023 004 005 006 048 046 041 Contact Arrangements Face View, Pin Side-(Male Twist Pin Contacts) 1 1 4 1 MASTER KEY (TYP) 1 7 2 1 3 3 4 8 4 5 16 17 MIK/MIKM/MIKQ 7 Contacts 17 29 24 31 22 32 23 34 19 MIKQ 19 Contacts 37 47 48 39 57 66 58 46 40 33 38 39 28 29 28 16 25 6 13 15 16 12 19 20 10 9 10 7 11 12 9 4 5 4 5 3 47 MIKQ 37 Contacts 53 55 74 67 52 75 MIK/MIKM 55 Contacts 81 82 85 MIKM 85 Contacts Cavity identification numbers are for reference only, they do not appear on connectors. Shell Dimensions MIK (Rear Panel Mount Thickness - see Tabulation "T") .335 (8.51) Max. L Weight given is 1/2" uninsulated, solid #25 AWG gold plated copper pigtails K A THD D DIA. + D DIA. S R D DIA. Receptacle Shell Size 7 only + D DIA. F L H (TYP.) Plug S H (TYP.) L A THD. R A THD. A THD. F L Receptacle Shell Size 55 only Plug Plug Part Number by Shell Size MIK6-7P MIK6-55P A Thread 5/16-24UNF-2B 9/16-24UNF-2A D Max. .375 (9.52) .755 (19.18) L Max. .315 (8.00) .460 (11.68) Avg. Weight oz. (gm.) 5% .054 (1.54) .202 (5.72) Receptacle Part Number A D F by Shell Size Thread .010 (0.25) Max. MIK0-7S 5/16-24UNF-2B .325 (8.26) .315 (8.00) MIK0-55S 9/16-24UNF-2A .625 (15.88) .440 (11.18) H .003 (0.08) .078 (1.98) .089 (2.26) K L .010 (0.25) Max. .062 (1.57) .355 (9.02) .100 (2.54) .495 (12.57) Dimensions shown in inch (mm) Specifications and dimensions subject to change www.ittcannon.com 45 R .005 (0.13) .460 (11.68) .580 (14.73) S T Avg. Weight Max. Max. oz. (gm.) 5% .630 (16.00) .032 (0.81) .022 (.635) .760 (19.30) .062 (1.57) .134 (3.81) K Microminiature Circular - .050" Contact Spacing MIKM/MIKQ Shell Dimensions (Continued) MIKM (Rear Panel Mount Thickness .335 (8.51) max. - see Tabulation "T") .3 3 5 (8 .5 1 ) M ax. L K A T H .D AT H D R AT H D D D IA . D D IA . S R D D IA . H (T Y.) P Receptacle Shell Size 7 only Plug D D IA . L F L AT H D S H (T Y.) P Plug F L K Receptacle Shell Size 55 & 85 Plug Part Number by Shell Size MIKM6-7P MIKM6-55P MIKM6-85P A Thread D Max. L Max. Avg. Weight _5% oz. (gm.)+ 5/16-24UNF-2A 5/8-24UNEF-2B 11/16-24UNEF-2B .375 (9.52) .775 (19.18) .860 (21.84) .315 (8.00) .440 (11.18) .460 (11.68) .054 (1.54) .333 (9.44) .419 (11.88) Receptacle Part Number by Shell Size A Thread F Max. H +_ .003 (0.08) K L Max. R +_ .005 (0.13) .320 (8.13) .440 (11.18) .440 (11.18) .078 (1.98) .091 (2.31) .091 (2.31) .062 (1.57) .062 (1.57) .062 (1.57) .400 (10.16) .490 (12.45) .490 (12.45) .460 (11.68) .580 (14.73) .674 (17.12) D MIKM0-7S 5/16-24UNF-2A .325 (8.26) MIKM0-55S 5/8-24UNEF-2A .625 (15.88) MIKM0-85S 11/16-24UNEF-2A .745 (18.92) S Max. T Max. Avg. Weight oz. (gm.)+ _5% .630 (16.00) .032 (0.81) .760 (19.30) .125 (3.18) .845 (21.46) .125 (3.18) .051 (1.45) .269 (7.62) .346 (9.80) MIKQ (Front Panel Mounting Type Shown-.093 (2.36) Thickness) .950 (24.13) MAX. .043.005 (1.090.13) D THD. MASTER KEY A DIA. .760 (19.30) MAX. * C DIM. ACROSS FLAT NUT B DIA. A 1.20 (30.48) MAX. FOR SIZE 37 ONLY B C DIA. .093 (2.36) REF. .495 (12.67) MAX. Plug Receptacle Plug Part Number by Shell Size MIKQ6-7S MIKQ6-19S MIKQ6-37S A MAX. B MAX. C Ref. .385 (9.78) .515 (13.08) .760 (19.30) .305 (7.75) .405 (10.29) .635 (16.13) .180 (4.57) .260 (6.60) .350 (8.89) *Std. Conn. not supplied with Cable Nut & Grip, See Mod Codes. Avg. Weight oz. (gm.)5% .214 (6.08) .376 (10.70) .714 (20.23) Lanyard Relase Is Available. Consult factory. Receptacle Part Number by Shell Size A MAX. B MAX. C MAX. D Thread Avg. Weight oz. (gm.)5% MIKQ6-7S MIKQ7-19P MIKQ7-37P .510 (12.95) .575 (14.60) .855 (21.71) .245 (6.22) .345 (8.76) .520 (13.20) .359 (9.12) .470 (11.94) .740 (18.80) 3/8-32UNEF-2A 1/2-28UNEF-2A 3/4-20UNEF-2A .128 (3.63) .214 (6.08) .300 (8.52) MIKQ Front Panel Mounting Front Panel Mounting-MIKQ7 Shell Size A B DIA. MIKQ7-7P MIKQ7-19P MIKQ7-37P A .005 (0.13) .364 (9.24) .475 (12.06) .740 (18.78) B DIA. .390 (9.91) .515 (13.08) .755 (19.17) Dimensions shown in inch (mm) Specifications and dimensions subject to change www.ittcannon.com 46 Microminiature Circular - .050" Contact Spacing MIKQ Shell Dimensions (Continued) MIKQ9-7P (Back Panel Mounting) .043 .005 (1.09 0.13) KEY .245 (6.22) DIA. MAX. .250 .010 (6.35 0.25) WIRE EXTENSION LENGTH .415 .010 (10.54 0.25) INSULATOR SHELL .485 (12.32) MAX. .570 (14.48) DIA. MAX. 7/16-28 UNEF-2A 1/2 HEX-NUT Receptacle MIKQ9-19P (Back Panel Mounting) .043 .005 (1.09 0.13) KEY .250 .010 (6.35 0.25) INSULATOR .525 .010 (13.33 0.25) .345 (8.76) DIA. MAX. 9/16-24 UNEF-2A THREAD .625 .010 (15.87 0.25) DIA. 5/8 HEX-NUT .425 (10.79 .485 (12.32) MAX. +.015 -.000 +0.30 -0.00 ) Receptacle MIKQ9-37P (Back Panel Mounting) .250 .010 (6.35 0.25) .043 .005 (1.09 0.13) .505 MAX. (12.83 MAX.) SHELL .665 MAX. (16.89) MAX. .730 .010 (18.54 0.25) INSULATOR 3/4-20 UNEF-2A THREAD .885 MAX. (22.48 MAX.) 13/16 HEX NUT .490 MAX. (12.45 MAX.) Receptacle MIKQ Rear Panel Mounting A B DIA. Dimensions shown in inch (mm) Specifications and dimensions subject to change www.ittcannon.com 47 Rear Panel Mounting-MIKQ9 A .005 (0.13) Shell Size MIKQ9-7P .425 (10.76) MIKQ9-19P .535 (13.58) MIKQ9-37P .740 (18.78) B Dia. .440 (11.18) .564 (14.33) .755 (19.17) Microstrips .050" Contact Spacing MT The Cannon Microstrips provide an extremely dense and reliable interconnection solution in a minimum profile package, giving great application flexibility. Available with latches or guide pins, Microstrips are frequently found in board-to-wire applications where high reliability is a primary concern. Three termination styles are available: solder cup, pigtail, harness, or printed circuit leads. The MicroPin Contact System assures maximum performance in a minimum package. Product Features * * * * * * * * * * High Performance MicroPin Contact System High-density .050" contact spacing Pre-wired for ease of installation Fully potted wire terminations Guide pins for alignment and polarizing Quick-disconnect latches 3 Amp current rating Precision crimp terminations Solder cup, pigtail or printed circuit terminations Surface mount leads MicroPin Contact System SLEEVE The Cannon MicroPin Contact System offers uncompromised performance in downsized interconnects. The beryllium copper pin contact is fully recessed in the insulator, assuring positive contact alignment and robust performance. The socket contact is precision machined from high strength copper alloy and features a smooth lead-in chamfer. WIRE WIRE CRIMP The MicroPin features seven points of electrical contact. This contact system assures high normal force, excellent wipe and superior shock and vibration performance. Specifications Current Rating Dielectric Withstanding Voltage Insulation Resistance Contact Resistance Operating Temperature Durability Shock/Vibration Connector Mating Force Latch Retention Wire Size 3 Amps max 900 VAC @ sea level; 300 VAC @ 70,000 feet altitude 5000 megohms min. 8 milliohms max. MTV polyester -56C to +125C; MTB diallyl phthalate -55C to +150C 500 cycles min. 50 G's/20 G's (8 oz.) x (# of contacts) 5 lbs. min. #26 AWG insulated wire, #25 AWG uninsulated solid wire. MT strips will also accommodate #24 AWG through #32 AWG. For other wiring options contact the factory for ordering information. General Performance requirements are designed to be comparable to MIL-DTL-83513 Materials and Finishes Insulator Contact Contact Finish Insulated Wire Uninsulated Solid Wire Potting Material/Contact Encapsulant Latch MTV: Glass-filled polyester per MIL-M-24519; MTB: Glass-filled diallyl phthalate per MIL-M-14 Copper Alloy per 83513-Style 50 Microinches Min. Gold Plated per MIL-G-45204 #26 AWG. 19/38 Stranded, silver-plated copper, TFE Teflon insulation per MIL-W-16878/4 #25 AWG gold-plated copper per QQ-W-343 Epoxy 300 series stainless steel, passivated Dimensions shown in inch (mm) Specifications and dimensions subject to change www.ittcannon.com 48 Microstrips .050" Contact Spacing MT How to Order R MTV1 - 16 P H001 01 RoHS Compliance Series MTB1 - High Temperature Diallyl Phthalate 150C (Recommended for severe environments) MTV1 - Polyester 125C (Recommended for general purpose use) Number of Cavities 2 through 40. This number is the total number of cavities including guide pins and latches. 40 positions is the maximum recommended size for standard strips, but sizes up to 120 positions are available on request. Contact Type P- Pin S - Socket Pin Strip Socket Strip Termination Style Solder Cup contacts for customer termination S Pre-wired Pigtails H067 - Pre-wired pigtail with 18" of insulated Teflon wire per M22759/11, #26 AWG, 19 strand, yellow HY01 - Pre-wired pigtail with 18" of insulated Teflon wire per M22759/11, #26 AWG, 19 strand, 10 color repeating Straight Terminals .018" diameter, gold-plated L1 - 5" extension L2 - 1" extension L57 - .190" extension L61 - .125" extension Right Angle Terminals staggered footprint .018" diameter, gold plated AL57 - .190" extension AL61 - .125" extension Right Angle Terminals .050" in-line footprint .018" diameter, gold plated BL57 - .190" extension BL61 - .125" extension Surface Mount .018" diameter, gold-plated CL1 Guide Pin and Latch Options 01 - Guide pin installed in end cavities of socket strip. Blank holes in end cavities of pin strip. 02 - Guide pin installed in cavity #1 of socket Strip. Blank holes in cavity #1 of pin strip. 03 - Spring latches installed in end cavities of socket strip. Latch clips installed in end cavities of pin strip. For use with MTV1 only. 04 - Spring latch installed in center cavity of socket strip. Spring latch installed in center cavity of pin strip. For use with MTV1 only. 01 Guide Pins In End Cavities 02 Guide Pins In Cavity #1 03 End Latches Dimensions shown in inch (mm) Specifications and dimensions subject to change www.ittcannon.com 49 04 Center Latch Microstrips .050" Contact Spacing MT Connector Weights Contact (with std. 1/2" copper pigtails) .040 gms. MTB pin .021 gms. Insulator (per contact cavity) MTV socket pin socket .006 gms. .014 gms. .004 gms. Guide Post Stainless Steel .035 gms. Latch Male Female .035 gms. .074 gms. Terminal Dimensions .170 (4.32) MAX. .065 (1.65) MAX. .100 (2.54) .018 (.45) .002 (.05) L1: .500 (12.7) L2: 1.00 (25.4) L57: .190 (4.83) L6: .125 (3.18) MIN+ .015 (0.38) .065 (1.65) MAX. .018 (1.65) .002 (0.5) BL57: .190 (4.83) BL61: .125 (3.18) MIN+ .015 (0.38) Solder Cup Straight Terminals Right Angle Terminals .050" Centers .0120 (0.30) .001 (0.03) CAV #1 PIN ALL EVEN NUMBERED CONTACTS CAV #1 SOCKET .070 (1.78) .030 (0.76) AL57 .190 (4.83) AL61 .125 (3.18) .160 (4.06) .140 (3.56) .100 (2.54) .010 (0.25) TYP .100 (2.54) .025 (0.64) REF Right Angle Terminals .100" Spacing Staggered .050 (1.27) MIN SOLDER DIPPED Surface Mount Terminals Dimensions shown in inch (mm) Specifications and dimensions subject to change www.ittcannon.com 50 Microstrips .050" Contact Spacing MT Latch Dimensions .0085 (0.22) REF .076 (1.93) MAX .077 (1.96) MAX .035 (0.89) REF .035 (0.89) REF .010 (6.25) REF .107 (2.72) MAX .050 (1.27) REF .050 (1.27) REF NO CONTACT .2835 (7.20) REF .250 (6.35) MAX .020 (0.51) REF NO CONTACT .070 (1.78) REF .035 (0.89) REF .070 (1.78) REF .045 (1.14) MAX .035 (0.89) REF .100 (2.54) REF Male Latch Female Latch Guide Pin Dimensions .032 .003 (0.81 0.08) DIA. .200 .010 (5.08 0.25) Standard Wire Termination Codes The following termination codes are listed for your information. For additional codes please refer to Appendix on page 79 and 81. All wire lengths are minimum. Harness Type - (H) Solid Uninsulated Type - (L) #26 AWG per MIL-W-16878 Type E; Teflon Stranded Length 3 (76.2) 6 (152.4) 8 (203.2) 10 (254.0) 12 (304.8) 18 (457.2) 20 (508.0) 24 (609.6) 30 (762.0) 36 (914.4) 48 (1219.2) 72 (1828.5) 120 (3048.0) All Yellow H020 H019 H026 H029 H028 H001 H033 H009 H010 H011 H013 H017 H042 Dimensions shown in inch (mm) Specifications and dimensions subject to change www.ittcannon.com 51 Color Coded H027 H016 H034 H025 H002 H003 H023 H004 H005 H006 H048 H046 H041 #25 AWG Gold Plated Copper Termination Code L61 L56 L57 L39 L58 L1 L14 L2 L7 L6 L16 L10 Length .125 (3.18) .150 (3.81) .190 (4.83) .250 (6.35) .375 (9.52) .500 (12.70) .750 (19.05) 1.000 (25.40) 1.500 (38.10) 2.000 (50.80) 2.500 (63.50) 3.000 (76.20) Microminiature Strip - .100/.050" Contact Spacing MT Polarization Modification code "-01" in the part number refers to guide posts located on both ends of the socket side of the 50-MIL STRIP connector and empty cavities on the pin side to accept the guide posts. Although in many cases it is not necessary to polarize 50-MIL STRIP connectors, there are several ways to prevent cross plugging. One method is the use of guide posts that can be located in specified cavities to assure that the contacts will align when these post are positioned before mating. MTB1 and MTV1 - .050 (1.27) Contact Centers .032 .003 (0.81 0.08) DIA. .200 .010 (5.08 0.25) .050 (1.27) TYP. .126 .005 (3.20 0.13) CAVITY #1 CAVITY #1 .050 (1.27) TYP. .283 .005 (7.19 0.13) A CAVITY #1 A CAVITY #1 .100 .005 (2.54 0.13) LEAD LENGTH .070 .005 (1.78 0.13): MTV .080 .005 (2.03 0.13): MTB .070 .005 (1.78 0.13): MTV LEAD LENGTH .080 .005 (2.03 0.13): MTB .125 (3.18) MAX. EPOXY (INSULATED WIRE ONLY) .125 (3.18) MAX. EPOXY (INSULATED WIRE ONLY) Receptacle Plug A .015 (0.38) Part Number by Size A .015 (0.38) Part Number by Size A .015 (0.38) Part Number by Size A .015 (0.38) MT*1-1** .070 (1.78) MT*1-21** 1.070 (27.18) MT*1-41** 2.070 (52.58) MT*1-61** 3.070 (77.98) MT*1-81** MT*1-2** .120 (3.05) MT*1-22** 1.120 (28.45) MT*1-42** 2.120 (53.85) MT*1-62** 3.120 (79.25) MT*1-82** 4.070 (103.38) MT*1-101** 5.070 (128.78) 4.120 (104.65) MT*1-102** MT*1-3** .170 (4.32) MT*1-23** 1.170 (29.72) MT*1-43** 2.170 (55.12) MT*1-63** 3.170 (80.52) 5.120 (130.05) MT*1-83** 4.170 (105.92) MT*1-103** MT*1-4** .220 (5.59) MT*1-24** 1.220 (30.99) MT*1-44** 2.220 (56.39) MT*1-64** 5.170 (131.32) 3.220 (81.79) MT*1-84** 4.220 (107.19) MT*1-104** MT*1-5** .270 (6.85) MT*1-25** 1.270 (32.36) MT*1-45** 2.270 (57.66) 5.220 (132.59) MT*1-65** 3.270 (83.06) MT*1-85** 4.270 (108.46) MT*1-105** MT*1-6** .320 (8.13) MT*1-26** 1.320 (33.53) MT*1-46** 5.270 (133.86) 2.320 (58.93) MT*1-66** 3.320 (84.33) MT*1-86** 4.320 (109.73) MT*1-106** MT*1-7** .370 (9.40) MT*1-27** 1.370 (34.80) 5.320 (135.13) MT*1-47** 2.370 (60.20) MT*1-67** 3.370 (85.60) MT*1-87** 4.370 (111.00) MT*1-107** MT*1-8** .420 (10.67) MT*1-28** 5.370 (136.40) 1.420 (36.07) MT*1-48** 2.420 (61.47) MT*1-68** 3.420 (86.87) MT*1-88** 4.420 (112.27) MT*1-108** MT*1-9** .470 (11.94) 5.420 (137.67) MT*1-29** 1.470 (37.34) MT*1-49** 2.470 (62.74) MT*1-69** 3.470 (88.14) MT*1-89** 4.470 (113.54) MT*1-109** MT*1-10** 5.470 (138.94) .520 (13.60) MT*1-30** 1.520 (38.61) MT*1-50** 2.520 (64.01) MT*1-70** 3.520 (89.41) MT*1-90** 4.520 (114.81) MT*1-110** 5.520 (140.21) MT*1-11** .570 (14.48) MT*1-31** 1.570 (39.88) MT*1-51** 2.570 (65.28) MT*1-71** 3.570 (90.68) MT*1-91** 4.570 (116.08) MT*1-111** 5.570 (141.48) MT*1-12** .620 (15.75) MT*1-32** 1.620 (41.15) MT*1-52** 2.620 (66.55) MT*1-72** 3.620 (91.95) MT*1-92** 4.620 (117.35) MT*1-112** 5.620 (142.75) MT*1-13** .670 (17.02) MT*1-33** 1.670 (42.42) MT*1-53** 2.670 (67.82) MT*1-73** 3.670 (93.22) MT*1-93** 4.670 (118.62) MT*1-113** 5.670 (144.02) MT*1-14** .720 (18.29) MT*1-34** 1.720 (43.69) MT*1-54** 2.720 (69.09) MT*1-74** 3.720 (94.49) MT*1-94** 4.720 (119.89) MT*1-114** 5.720 (145.29) MT*1-15** .770 (19.56) MT*1-35** 1.770 (44.96) MT*1-55** 2.770 (70.36) MT*1-75** 3.770 (95.76) MT*1-95** 4.770 (121.16) MT*1-115** 5.770 (146.56) MT*1-16** .820 (20.83) MT*1-36** 1.820 (46.23) MT*1-56** 2.820 (71.63) MT*1-76** 3.820 (97.03) MT*1-96** 4.820 (122.43) MT*1-116** 5.820 (147.83) MT*1-17** .870 (22.10) MT*1-37** 1.870 (47.50) MT*1-57** 2.870 (72.90) MT*1-77** 3.870 (98.30) MT*1-97** 4.870 (123.70) MT*1-117** 5.870 (149.10) MT*1-18** .920 (23.37) MT*1-38** 1.920 (48.77) MT*1-58** 2.920 (74.17) MT*1-78** 3.920 (99.57) MT*1-98** 4.920 (124.97) MT*1-118** 5.920 (150.37) MT*1-19** .970 (24.64) MT*1-39** 1.970 (50.04) MT*1-59** 2.970 (75.44) MT*1-79** 3.970 (100.84) MT*1-99** 4.970 (126.24) MT*1-119** 5.970 (151.64) MT*1-20** 1.020 (25.91) MT*1-40** 2.020 (51.31) MT*1-60** 3.020 (76.71) MT*1-80** 4.020 (102.11) MT*1-100** 5.020 (127.50) MT*1-120** 6.020 (152.91) Part Number by Size Part Number by Size A .015 (0.38) Part Number by Size A .015 (0.38) NOTE: MTB1 available in up to 120 contacts. Dimensions shown in inch (mm) Specifications and dimensions subject to change www.ittcannon.com 52 Microminiature Strip - .100/.050" Contact Spacing MT MTB2 and MTV2 - .100 (2.54) Contact Centers .032 .003 (0.81 0.08) DIA. .200 .010 (5.08 0.25) CAV #1 A A CAVITY #1 .100 (2.54) TYP. .070 .005 (1.78 0.13): MTV .070 .005 (1.78 0.13): MTV .080 .005 (2.03 0.13): MTB .080 .005 (2.03 0.13): MTB .126 .005 (3.20 0.13) .100 (2.54) TYP. CAVITY #1 CAVITY #1 .283 .005 (7.19 0.13) .100 .005 (2.54 0.13) LEAD LENGTH LEAD LENGTH .125 (3.18) MAX. EPOXY (INSULATED WIRE ONLY) .125 (3.18) MAX. EPOXY (INSULATED WIRE ONLY) Plug Receptacle Part Number by Size A .015 (0.38) MT*2-1** .070 (1.78) MT*2-31** A .015 (0.38) 3.070 (77.98) MT*2-2** .170 (4.32) MT*2-32** 3.170 (80.52) MT*2-3** .270 (6.86) MT*2-33** 3.270 (83.06) MT*2-4** .370 (9.40) MT*2-34** 3.370 (85.60) MT*2-5** .470 (11.94) MT*2-35** 3.470 (88.14) MT*2-6** .570 (14.48) MT*2-36** 3.570 (90.68) MT*2-7** .670 (17.02) MT*2-37** 3.670 (93.22) MT*2-8** .770 (19.56) MT*2-38** 3.770 (95.76) MT*2-9** .870 (22.10) MT*2-39** 3.870 (98.30) MT*2-10** .970 (24.64) MT*2-40** 3.970 (100.84) MT*2-11** 1.070 (27.18) MT*2-41** 4.070 (103.38) MT*2-12** 1.170 (29.72) MT*2-42** 4.170 (105.92) MT*2-13** 1.270 (32.26) MT*2-43** 4.270 (108.46) MT*2-14** 1.370 (34.80) MT*2-44** 4.370 (111.00) MT*2-15** 1.470 (37.34) MT*2-45** 4.470 (113.54) MT*2-16** 1.570 (39.88) MT*2-46** 4.570 (116.08) MT*2-17** 1.670 (42.42) MT*2-47** 4.670 (118.62) MT*2-18** 1.770 (44.96) MT*2-48** 4.770 (121.16) MT*2-19** 1.870 (47.50) MT*2-49** 4.870 (123.70) MT*2-20** 1.970 (50.04) MT*2-50** 4.970 (126.24) MT*2*21** 2.070 (52.58) MT*2*51** 5.070 (128.78) MT*2-22** 2.170 (55.12) MT*2-52** 5.170 (131.32) MT*2-23** 2.270 (57.66) MT*2-53** 5.270 (133.86) MT*2-24** 2.370 (60.20) MT*2-54** 5.370 (136.40) MT*2-25** 2.470 (62.74) MT*2-55** 5.470 (138.94) MT*2-26** 2.570 (65.28) MT*2-56** 5.570 (141.48) MT*2-27** 2.670 (67.82) MT*2-57** 5.670 (144.02) MT*2-28** 2.770 (70.36) MT*2-58** 5.770 (146.56) MT*2-29** 2.870 (72.90) MT*2-59** 5.870 (149.10) MT*2-30** 2.970 (75.44) MT*2-60** 5.970 (151.64) Dimensions shown in inch (mm) Specifications and dimensions subject to change www.ittcannon.com 53 Part Number by Size Micro Edgeboard - .050" Contact Spacing The Micro Edgeboard (MEB) connector series provides a combination of high density and high reliability for applications in airborne and space systems, computers and peripherals, and industrial /commercial control systems. This series incorporates the proven MICROPINTM/MICROSOCKETTM contact. This contact has an outstanding record of high reliability and millions of contacts are in use in various applications where electrical interconnects are used. The MEB has machined aluminum shells for ruggedness, diallyl phthalate insulator for top electrical performance and a 36-position polarization key system to prevent cross plug- MEB ging. Contacts are on .050 (1.27) center spacings. A variety of termination types are available, including 90 or right angle pigtails for multi-layered P.C. boards, "coke bottle" termination for double-sided P.C. boards. Harnessing capability is also available for both pin and socket sides. The MEB, including the SBR 90 or right angle variation available for multi-layer boards, can be mounted on the female (daughter) side of double or single-sided P.C. boards. The mating male (mother) board side can have the terminations formed to meet the application demands. Conforms to MIL-C-55302/120 thru 123. (not qualified) Specifications MATERIALS AND FINISHES TERMINATION TYPES Shell: 6061-T6 Aluminum Alloy per QQ-A-200/8 or QQ-A-225/8, electroless nickel per Consult factory for stranded wie lead modifications codes. SAE AMS-C-26074, Class 4, except .0010 to .0015 (0.03 to 0.04) thick or conversion coating per MIL-C-5541, Class 3, color gold. MECHANICAL FEATURES Contact, Pin and Socket: Copper Alloy, 50 microinch gold per ASTM B488, Type II, Code C, Class 1.25 Size or Length: 2 sizes Coupling: Friction/Jackscrew 303 stainless steel, passivated per QQ-P-35. Jackscrew/Jackpost: Shells, polarizing keys (36 positions) Polarization: Insulator: Glass-filled diallyl phthalate per MIL-M-14, Type SDG-F, color green Polyester per MIL-M-24519, Type GPT-30F , color black available for MEB-128 upon Contact Spacing Centers: .050 (1.27) request. Shell Styles: Plug and receptacle How to Order Not applicable for printed circuit board configurations shown on pages 55 & 56 R MEB 1 - 128 P * * *** RoHS COMPLIANCE SERIES PREFIX CONTACT SPACING LAYOUT CONTACT TYPE TERMINATION MODIFICATIONS LEAD LENGTH OTHER MODIFICATIONS SERIES PREFIX MEB Micro edgeboard, plug with twist pin contacts or recept. with microsocket contacts. TERMINATION MODIFICATIONS LUninsulated solid wire HInsulated stranded round harness wire SSolder pots BR PC board right angle, socket side only CONTACT SPACING 1 - .050 (1.27) centers 128/184 2 - .100 (2.54) centers 64/92 (alternate contact holes) LEAD LENGTH Consult factory for wire lead modification codes. OTHER MODIFICATIONS Consult factory LAYOUT 64, 92, 128, 184 CONTACT TYPE P - Pin S - Socket * For other contact spacing acommodations consult customer service. Dimensions shown in inch (mm) Specifications and dimensions subject to change www.ittcannon.com 54 Micro Edgeboard - .050" Contact Spacing MEB Plug (Mother Board) MEB1-12BS A .050 (1.27) B1 B A1 .050 (1.27) RETAINING PIN HOLES .250 (6.35) C #24 AWG F H E .180 .005 (4.57 .13) G D .0945 .0035 (2.40 .09) DIA. THRU .187 (4.75) X .045 (1.14) DEEP "C" BORE 2 PLACES "A" SIDE ONLY .187 (4.75) DIA. THRU "B"SIDE ONLY Weight oz. (gm.) Max. Part No. 128S 128SBR .5 (14.17) .5 (14.17) A .015 (0.38) B .010 (0.25) C .010 (0.25) D .010 (0.25) E .010 (0.25) F Max. G* Max. H .020 (0.51) 3.950 (100.33) .250 (6.35) .400 (10.16) 3.700 (93.98) .300 (7.62) .280 (7.11) .030 (0.76) .200 (5.08) *Will accept up to .093 (2.36) thick P.C. Board with shell modifications. Receptacle (Daughter Board) MEB1-12BS A .050 (1.27) B1 B A1 .050 (1.27) RETAINING PIN HOLES .250 (6.35) C #24 AWG F H E .180 .005 (4.57 .13) G D .0945 .0035 (2.40 .09) DIA. THRU .187 (4.75) X .045 (1.14) DEEP "C" BORE 2 PLACES "A" SIDE ONLY .187 (4.75) DIA. THRU "B"SIDE ONLY Part No. 128S 128SBR Weight A oz. (gm.) Max. .015 (0.38) .5 (14.17) 3.950 (100.33) .5 (14.17) B .010 (0.25) C .010 (0.25) D .010 (0.25) E .010 (0.25) F Max. G* Max. H .020 (0.51) .250 (6.35) .400 (10.16) 3.700 (93.98) .300 (7.62) .280 (7.11) .030 (0.76) .200 (5.08) *Will accept up to .093 (2.36) thick P.C. Board with shell modifications. Dimensions shown in inch (mm) Specifications and dimensions subject to change www.ittcannon.com 55 Micro Edgeboard - .050" Contact Spacing MEB Plug (Mother Board) MEB1-184P B2 .0945 +_ .0035 (2.40 +_ 0.09) 3 PLACES A B1 C C A1 B .075 (1.91) A2 B1 .050 (1.27) TYP A1 RETAINING PIN HOLES D G H #25 AWG (MEB1-184P) or F TYP E .075 (1.91) .075 (1.91) TYP. Part No. Weight oz. (gm.) Max. A + _.015 (0.38) B + _.010 (0.25) C + _.005 (0.13) D + _.010 (0.25) E + _.010 (0.25) F + _.010 (0.25) G + _.025 (0.64) H + _.025 (0.64) 184P 1.0 (28.35) 5.800 (147.32) .343 (8.71) 2.775 (70.49) .400 (10.16) .250 (6.35) .280 (7.11) .350 (8.89) .275 (6.99) Receptacle (Daughter Board) MEB1-184S .050 (1.27) TYP. A C C A1 C .075 (1.91) B B1 RETAINING PIN HOLES .250 (6.35) D #24 AWG F H E .180 .005 (4.57 0.13) J G .0945 .0035 (2.40 .09) DIA. THRU .187 (4.75) X .075 (1.91) DEEP "C" BORE 3 PLACES-A SIDE ONLY. .187 (4.75) DIA. 3 PLACES-B SIDE ONLY Part No. 184S 184SBR Weight oz. (gm.) Max. A .015 (0.38) 1.0 (28.35) 5.800 (147.32) 1.0 (28.35) B .010 (0.25) C .005 (0.13) D .010 (0.25) .343 (8.71) 2.775 (70.49) .400 (10.16) E .010 (0.25) F Max. .300 (7.62) .280 (7.11) G Max. H .020 (0.51) J .010 (0.25) .030 (0.76) .200 (5.08) .250 (6.35) All round pigtail #25 AWG wire termination designs available for the MEB1-12B receptacle will apply on the MEB1-184 series also. *Will accept up to .093 (2.36) thick P.C. Board with shell modifications. Dimensions shown in inch (mm) Specifications and dimensions subject to change www.ittcannon.com 56 Micro Edgeboard - .050" Contact Spacing MEB PC Board Right Angle MEB1-128SBR .110 (2.79) MIN. .100 (2.54) .075 (1.91) .050 (1.27) ROW B EVEN* .275 (6.99) B6 B4 B2 B7 ROW B ODD* B1 A6 A2 A7 A5 A3 A1 .150 (3.81) .075 (1.91) ROW A EVEN* ROW A ODD* .180 (4.57) .100 (2.54) 3 PLACES PC BOARD B1 A1 Keying Accessory - Key and Retaining Pin Polarizing Hardware Kit MEB-128-P/N 320-9514-003 MEB-184-P/N 320-9514-002 .034 .001 (0.86 0.03) .029 (0.74) DIA. MAX. Contains 2 polarizing keys and 4 spiral pins. E MEB-184 P/N 980-0004-129 A B #2-56 UNC-2B THREAD .034 .001 (0.86 0.03) .029 (0.74) DIA. MAX. C .106 .003 (2.69 0.08) DIA. .186 .003 HEX. (4.72 0.08) D P/N 201-9509-000 MEB-128 P/N 980-0003-879 A .003 (0.08) B .005 (0.13) C .003 (0.08) D .010 (0.25) E .010 (0.25) .081 (2.06) .325 (8.26) .089 (2.26) .250 (6.35) .313 (7.95) Dimensions shown in inch (mm) Specifications and dimensions subject to change www.ittcannon.com 57 Micro Edgeboard - .050" Contact Spacing MEB Jackscrew/ Jackpost Assembly (MEB 64 & 128 Sizes Only) Jackpost Kit MEB plug or receptacle-P/N 320-9514-001 Contains 2 bushings and 4 spirals pins Jackscrew Kit MEB plug-P/N 320-9521-001 MEB receptacle-P/N 320-9521-000 Contains 2 jackscrew assemblies RECEPTACLE CONNECTOR RETAINING PIN RETAINING PIN PLUG CONNECTOR JACKPOST JACKPOST .260 (6.60) MAX. #2-56 UNC-2A THREAD #2-56 UNC-2A THREAD .790 .010 20.07 0.25) WASHER [.032 (0.81) THK] WASHER [.022 (0.56) thk] RETAINING PIN JACKSCREW ASSEMBLY RETAINING PIN .045 (1.14) REF. .270 (6.86) MAX. JACKSCREW ASSEMBLY Plug with Jackscrew Receptacle with Jackscrew Special Variations Alternative Receptacle Configuration .200 (5.08) MIN. 4-40 UNC-THD THRU HOLE .016 (0.41) DIA. .275 (6.99) .580 (14.73) .250 (6.35) .100 (2.54) 31 PLACES .285 (7.24) MAX. .030 (0.76) .110 (2.79) 2 PLACES .060 (1.52) .125 +_ .010 (3.18 +_ 0.25) 2 PLACES Dimensions shown in inch (mm) Specifications and dimensions subject to change www.ittcannon.com 58 The Centi Line - .075" Contact Spacing The Cannon Centi connectors are especially suitable for commercial applications such as computers, instrumentation, communications and audio equipment. They are available in D subminiature size metal shell rectangular, plastic shell rectangular and strip configurations. All Centi connectors use the reliable twist pin contact design in a 5 amp version terminated on .075 (1.91) and .100 (2.54) centers. The Centi contact is crimp removable, connectors are available for customer assembly. Standard crimp and assembly tools are available. The twist pin contact is recessed within the insulator housing while the rugged cylindrical socket is exposed. When the connector halves are mated, the chamfered sockets guide the pins into positive alignment. The CentipinTM contact, now under compression, forms a multi-point contact with the CentisocketTM to provide a high degree of reliability. * Contact rating: 5 amps max, except BR Series (2 amps max.) * Contact retention: Crimp snap-in/removable. Standard Data * Minimum contact centers: 0.075 (1.91). * Wire sizes: #22 thru #26 AWG, stranded or solid. * Contact termination: Multiple indent crimp. * Contact materials and finish: Copper alloy, gold- plated per ASTM B488, Type II, Code C, Class 1.25. * Mating/unmating force: 12 oz. per contact, max. Performance Data Test Method Dielectric Withstanding Method 301: 1,000 VAC at sea level Voltage 300 VAC at 70,000' altitude Criteria of Acceptance No breakdown No breakdown Insulation Resistance Method 302, Condition A 5,000 megohms minimum Thermal Shock Method 107, Condition A +55C to +85C Method 213, Condition I: 100 G's, 3 axes, 6 millisecond duration sawtooth pulse No physical damage Method 204, Condition B: 15 G's, 10-2,000 Hz, 12 hours 500 cycles of mating and unmating, 500 CPH max. No physical damage No loss of continuity> 1sec No mechanical or electrical defects Method 106, Omit 7a and 7b Method 101, Condition B: 48 hours Method 307: At 5 amps - Insulation resistance > 100 megohms Shall be capable of mating and unmating and meet contact resistance requirements Physical Shock Vibration Durability Moisture Resistance Salt Spray Contact Resistance Contact Retention Dimensions shown in inch (mm) Specifications and dimensions subject to change www.ittcannon.com 59 No physical damage No loss of continutiy> 1/sec 9 milliohms maximum 4 lb. minimum axial load (after 10 insertion extraction cycles) Double Density D - .075" Contact Spacing The Double Density D is a rectangular connector in the popular D Subminiature shell configuration featuring double the contact density in the same insert area. The Double Density D connector can thus accommodate up to 100 contacts instead of 50. This double contact density is achieved by using field-proven, highly reliable CentipinTM/CentisocketTM contacts on .075 (1.91) centers, in the positive contact alignment design. In this design contact positions are reversed; the flexible Centipin contacts are recessed in the insulator and the more rugged CentisocketTM contacts are exposed. This reversal of positions, and the chamfered-entry of the sockets, assures positive mating even under severe misalignment conditions. The contacts are retained in the monobloc insulator by a resilient internal shoulder that snaps into a locking groove in the contact. The chamfered front of the contact will not damage the internal shoulder in the insulator. TM 2D Contacts are crimp removable type. The Double Density D connector is available in the five popular shell and insert sizes accommodating up to 100 contacts. These connectors mate exclusively with other Double Density D connectors. A wide range of accessories can be used, including junction shells, potting cups, switching shells, guide pin plates, and dust caps. 1. STANDARD D HARDWARE1 Including full range of D-Subminiature accessories 2. ONE PIECE MONOBLOCK INSULATORglass-filled nylon material 2 3. CONTACT RETENTIONthermoplastic internal shoulder snaps into a locking groove in the contact. 3 4. TWIST PIN CONTACTS- Retention Force: 8 lbs. min. initially, 4 lbs. min. after 10 cycles. seven outer wiping surfaces assure electrical continuity even under severe shock and vibration 4 5. POSTIVE CONTACT ALIGNMENTflexible pin is recessed in insulator cavity and rugged socket is exposed 6. GUIDE-IN KEYS AND KEYWAYS- 5 assure alignment during mating and prevent scooping 6 Specifications WEIGHT Part Number by shell size Weight (in gr.) Weight (in oz.) Less With Contacts Less With Contacts MATERIALS AND FINISHES - Steel, cadmium plated with yellow chro- *Shell mate supplementary coating MECHANICAL FEATURES Sizes - Five shell sizes: E, A, B, C, and D Coupling - Friction or jackscrew 2DE19P 4.05 5.02 .142 .177 Mounting Hardware - Stainless steel Polarization - Keystone-shaped shells 2DE19S 3.75 5.17 .133 .182 and Float Mounts - .075 (1.91) 2DA31P 5.20 6.78 .183 .239 Insulator - Glass-filled nylon Contact Spacing 2DA31S 4.90 7.22 .173 .255 Contacts - Copper alloy, gold plate 2DB52P 8.75 11.40 .308 .402 Alternate finish, 2DB52S 7.15 11.05 .252 .390 - A106 Gold over brass A156 Gold over brass 2DC79P 11.70 15.73 .413 .555 2DC79S 9.70 15.62 .342 .551 2DD100P 12.85 17.95 .453 .633 2DD100S 10.95 18.45 .386 .651 Modification Code Contact Termination - Crimp snap-in A197 Tin/Lead over steel *Brass non-magnetic also available How to Order 2D E R 2D A F 19 31 S P BR * * * * RoHS COMPLIANCE SERIES SHELL SIZE FLOAT MOUNTS CONTACT ARRANGEMENT CONTACT TYPE TERMINATION MODIFICATION NOTE: Connectors may be ordered less contacts by adding the mod callout "FO" at end of number. Contacts are then supplied in bulk form. SERIES 2D - Double Density D CONTACT ARRANGEMENT 19, 31, 52, 79 and 100 SHELL SIZE E, A, B, C and D CONTACT TYPE* P - Pin S - Socket FLOAT MOUNTS Omit if not required * Accommodates AWG #26 thru #22 TERMINATION BR - 90 right angle PCB mounting (For BR Series use "P" to designate jackpost) MODIFICATION F171 - Jackpost assembly F172 - Standard jackscrew F173 - Low profile jackscrew For other modifications consult factory Dimensions shown in inch (mm) Specifications and dimensions subject to change www.ittcannon.com 60 Double Density D - .075" Contact Spacing 2D Standard Shell M A L B K 10 (TYP) G J D + + E + C + V .856(21.74)MAX. TWO MTG. HOLES .123 .005 (3.12 0.13) T + .020 (0.51) - .000 (0.00) .250 (6.35) .250 (6.35) .250 (6.35) .250 (6.35) .236 (5.99) Part Number by Shell Size 2DE19P 2DE19S 2DA31P 2DA31S 2DB52P T H T + .020 (0.51) - .000 (0.00) .236 (5.99) .236 (5.99) .236 (5.99) .236 (5.99) .236 (5.99) Part Number by Shell Size 2DB52S 2DC79P 2DC79S 2DD100P 2DD100S Float Mount A K B + G J N 10 (TYP) + D + E .032 (.812) TOTAL DIAMETRAL FLOAT C M + H TWO MTG. HOLES .0885 .0025 (2.248 0.064) V Part Number A B C D E G H J K L M N by Shell Size .015 (0.38) .010 (0.25) .010 (0.25) .010 (0.25) .015 (0.38) .010 (0.25) .010 (0.25) .010 (0.25) .010 (0.25) .010 (0.25) .010 (0.25) .010 (0.25) V Max. 2DE19P 1.213 (30.81) .697 (17.70) .984 (24.99) .360 (9.14) .494 (12.55) .759 (19.28) .422 (10.72) .036 (.914) .236 (5.99) .055 (1.40) .422 (10.72) .120 (3.05) .555 (14.10) 2DE19S 1.213 (30.81) .640 (16.26) .984 (24.99) .308 (7.82) .494 (12.55) .759 (19.28) .422 (10.72) .032 (213) .243 (6.17) .047 (1.19) .429 (10.90) .120 (3.05) .555 (14.10) 2DA31P 1.541 (39.14) 1.025 (26.03) 1.312 (33.32) .360 (9.14) .494 (12.55) 1.083 (27.51) .422 (10.72) .036 (.914) .236 (5.99) .055 (1.40) .422 (10.72) .120 (3.05) .555 (14.10) 2DA31S 1.541 (39.14) .968 (24.58) 1.312 (33.32) .308 (7.82) .494 (12.55) 1.083 (27.51) .422 (10.72) .032 (213) .243 (6.17) .047 (1.19) .429 (10.90) .120 (3.05) .555 (14.10) 2DB52P 2.088 (53.03) 1.583 (40.21) 1.852 (47.04) .378 (9.60) .494 (12.55) 1.625 (41.27) .422 (10.72) .036 (.914) .231 (5.87) .055 (1.40) .426 (10.82) .129 (3.28) .555 (14.10) 2DB52S 2.088 (53.03) 1.508 (38.30) 1.852 (47.04) .308 (7.82) .494 (12.55) 1.625 (41.27) .422 (10.72) .032 (213) .243 (6.17) .047 (1.19) .429 (10.90) .120 (3.05) .555 (14.10) 2DC79P 2.729 (69.31) 2.231 (56.67) 2.500 (63.50) .378 (9.60) .494 (12.55) 2.272 (57.71) .422 (10.72) .036 (.914) .231 (5.87) .055 (1.40) .426 (10.82) .129 (3.28) .555 (14.10) 2DC79S 2.729 (69.31) 2.156 (54.76) 2.500 (63.50) .308 (7.82) .494 (12.55) 2.272 (57.71) .422 (10.72) .032 (213) .243 (6.17) .047 (1.19) .429 (10.90) .120 (3.05) .555 (14.10) 2DD100P 2.635 (66.92) 2.127 (54.02) 2.406 (61.11) .484 (12.29) .605 (15.37) 2.178 (55.32) .534 (13.56) .036 (.914) .231 (5.87) .055 (1.40) .426 (10.82) .129 (3.28) .555 (14.10) 2DD100S 2.635 (66.92) 2.062 (52.37) 2.406 (61.11) .420 (10.67) .605 (15.37) 2.178 (55.32) .534 (13.56) .032 (213) .243 (6.17) .047 (1.19) .429 (10.90) .120 (3.05) .555 (14.10) For shell with float mounts, add letter F after shell size, e.g., 2DEF19P. Jackscrew/Jackpost Assembly .180 .025 Grip (4.57 0.64) Length #4-40 UNC-2A THREAD .025 (0.64) MAX. .620 .010 (15.75 0.25) #4-40 UNC-2B THREAD #4-40 UNC-2A THREAD .025 (0.64) MAX. .180 .025 Grip (4.57 0.64) Length .230 (5.84) MAX. .233 (5.92) .223 (5.66) .325 .015 (8.26 0.38) #4-40 UNC-2A THREAD Standard (F172) Jackscrew (factory installed) Low Profile (F173) Jackscrew (factory installed) Dimensions shown in inch (mm) Specifications and dimensions subject to change www.ittcannon.com 61 Jackpost (F171) Front Panel Connector Mounting Only Double Density D - .075" Contact Spacing 2D Contact Arrangements All views are pin front face. Use reverse order for socket side. 1 7 14 6 13 19 1 11 22 10 21 31 DE 19 Contacts 1 18 36 DA 31 Contacts 1 27 54 17 35 52 DB 52 Contacts 1 27 52 76 26 53 79 26 51 75 100 DC 79 Contacts DD 100 Contacts Cavity identification numbers are shown for reference only and do not appear on insulator front face. However they do appear on rear of insulator. 90 PCB Mounting - 3 Row .0375 (0.95) REF. .148 (3.76) MIN. .075 (.190) REF. .125 (3.18) .115 (2.92) DIA. TYP. 2x .130 (3.30) .100 (2.54) .690 (17.53) MAX. .253 (6.43) .233 (5.92) .100 (2.54) REF. .100 (2.54) REF. .510 (12.95) .490 (12.45) B B .075 (1.90) CAV. #1 .065 (1.65) .510 (12.95) .480 (12.18) #4-40 UNC-2B THREAD (2 PLACES) LAST CAV. A A PCB Termination Leads (all contact arrangements) .024 (6.10) to .028 (7.11). LAST LEAD Suggested finished PC hole Size .033 (8.38) +_ .003 (0.08) LEAD #1 Part Number by Shell Size 2DE19SBRP A .015 (0.38) 1.215 (30.86) B .010 (0.25) .984 (24.99) C Max. .690 (17.53) 2DA31SBRP 1.540 (39.12) 1.312 (33.32) .690 (17.53) 2DB52SBRP 2.090 (53.09) 1.852 (47.04) .690 (17.53) 2DC79SBRP 2.730 (69.34) 2.500 (63.50) .690 (17.53) Dimensions shown in inch (mm) Specifications and dimensions subject to change www.ittcannon.com 62 Double Density D - .075" Contact Spacing 2D 90 PCB Mounting - 4 Row .0375 (0.94) REF. .125 (3.18) .115 (2.92) DIA. TYP. .130 (3.30) MIN. .075 (1.90) REF. + + + + + + + + + + + + + + + + ++ + + + + + + + + + + + + + + + + + + + + .790 (20.07) MAX. + + + + + ++ + + + + + + + ++ + + + + + + + + + + + + + + + + ++ + + .100 (2.54) REF. .253 (6.43) .233 (5.92) .100 (2.54) REF. .200 (5.08) REF. .510 (12.95) .490 (12.45) B B .075 (1.90) CAV #1 .065 (1.65) + .620 (15.75) .590 (14.99) + #4-40 UNC-2B THREAD (2 PLACES) CAV #100 A A LEAD #100 LEAD #1 Part Number by Shell Size 2DD100SBRP A + _ .015 (0.38) 2.635 (66.93) Contact Arrangements - Page 62 Dimensions shown in inch (mm) Specifications and dimensions subject to change www.ittcannon.com 63 B + _ .010 (0.25) 2.406 (61.11) C Max. .790 (20.07) Double Density D - .075" Contact Spacing 2D Panel Cutouts A 100' TYP. B G F H FULL R K TYP R E .032 (0.81) R MAX. TYP D C G D C Mtg. Conn. Method 2DE 2DA 2DB 2DC 2DD A + _ .005 (0.13) B + _ .005 (0.13) C + _ .005 (0.13) D + _ .005 (0.13) Front .874 (22.20) .437 (11.10) .984 (24.99) .492 (12.50) Rear .806 (20.47) .403 (10.24) .984 (24.99) .492 (12.50) Front 1.202 (30.53) .601 (15.26) 1.312 (33.32) Rear 1.134 (28.80) .567 (14.40) Front 1.743 (44.27) Rear E + _ .005 (0.13) F + _ .005 (0.13) G + _ .002 (0.05) H + _ .002 (0.05) K + _ .002 (0.05) .513 (13.03) .257 (6.53) .120 (3.05) .060 (1.52) .083 (2.11) .449 (11.40) .225 (5.71) .120 (3.05) .060 (1.52) .132 (3.35) .656 (16.66) .513 (13.03) .257 (6.53) .120 (3.05) .060 (1.52) .083 (2.11) 1.312 (33.32) .656 (16.66) .449 (11.40) .225 (5.71) .120 (3.05) .060 (1.52) .132 (3.35) .872 (22.15) 1.852 (47.04) .926 (23.52) .513 (13.03) .257 (6.53) .120 (3.05) .060 (1.52) .083 (2.11) 1.674 (42.52) .837 (21.26) 1.852 (47.04) .926 (23.52) .449 (11.40) .225 (5.71) .120 (3.05) .060 (1.52) .132 (3.35) Front 2.391 (60.73) 1.196 (30.38) 2.500 (63.50) 1.250 (31.75) .513 (13.03) .257 (6.53) .120 (3.05) .060 (1.52) .083 (2.11) Rear 2.326 (59.08) 1.163 (29.54) 2.500 (63.50) 1.250 (31.75) .449 (11.40) .225 (5.71) .120 (3.05) .060 (1.52) .132 (3.35) Front 2.297 (58.34) 1.149 (29.18) 2.406 (61.11) 1.203 (30.56) .623 (15.82) .312 (7.92) .120 (3.05) .060 (1.52) .083 (2.11) Rear 2.218 (56.34) 1.109 (28.17) 2.406 (61.11) 1.203 (30.56) .555 (14.10) .278 (7.06) .120 (3.05) .060 (1.52) .132 (3.35) For contact part numbers, termination tooling and assembly see pages 67-69. Panel Mounting 3/32 THICKNESS (REF.) RECOMMENDED Front Mounting Standard RIVET THICKNESS Front Mounting Float RIVET THICKNESS Rear Mounting Standard Rear Mounting Float Dimensions shown in inch (mm) Specifications and dimensions subject to change www.ittcannon.com 64 Centi-D Loc-.075" Contact Spacing CDL A subminiature all plastic high density "D" rectangular connector. The CDL is a general purpose connector with a peripheral o-ring and wire sealing gasket. Connector utilizes rear insertion, front release, crimp snap-in size 22, centi-loc contacts installable by the custormer or, if preferred, by the factory. MATERIAL Insulator: Black Nylon Dielectric Gasket: Polychloroprene Contact: Copper Alloy, Gold Plated Seal Ring Silicone How to Order R RoHS COMPLIANCE CDL 2A - 139 P - * - F0 CONTACT ARRANGEMENT SERIES 139 (Consult customer service for other sizes) Centi-D Loc Series SERIES TYPE 2 2A TYPE - No lock (mtg. holes) - No lock type with rear gasket CONTACT ARRANGEMENT CONTACT STYLE P - Centi-loc pin S - Centi-loc socket MODIFICATION CODES CONTACT STYLE F0 - Less contacts MODIFICATION CODES Plug 2.344 (59.54) .005 (0.13) CAVITY #1 .560 (14.22) MAX. 2.625 (66.68) CAVITY #1 .625 (15.88) .010 (0.25) SILICONE SEAL RING .260 (6.60) .010 (0.25) .625 (15.88) .010 (0.25) CONTACT HEIGHT .035 (0.89) .015 (0.38) CONTACT HEIGHT .065 (1.65) .045 (1.14) .175 (4.44) MAX. .540 (13.72) MAX. .535 (13.59) MAX. 2.025 (51.44) MAX. .150 (3.81) .010 (0.25) .150 (3.81) .010 (0.25) Plug 2.025 (51.44) MAX. Receptacle Recommended Panel Cutouts .125 (3.18) DIA. TYP. .565 (14.35) .005 (0.13) .2035 (51.69) .016 (0.41) .063 (1.60) RAD. MAX. 2.344 (59.54) .005 (0.13) Contact Arrangements Engaging Face View CAVITY #1 CAVITY #1 CAVITY #70 CAVITY #70 CAVITY #92 CAVITY #92 CAVITY #117 CAVITY #117 CAVITY #139 CAVITY #139 Plug Dimensions shown in inch (mm) Specifications and dimensions subject to change Receptacle www.ittcannon.com 65 Strip Connectors - .100"/.075" Contact Spacing CENTI-LOC connectors are low-cost nylon strip connectors designed for commercial applications such as instrumentation, communications, and medical equipment. They are available in continuous strip form up to a maximum length of 6 inches (152.40mm), accommodating from 1 to 60 rear insertion, front release, crimp snap-in size 22 CENTIPINTM/ CENTISOCKETTM contacts. These contacts utilize a proven positive contact alignment CTA design, giving additional contact strength and positive contact alignment during mating. These connectors can be ordered in kit or bulk form. The kit comprises all the parts necessary to assemble one complete 6-inch (152.40) strip connector with 60 contacts on .100 (2.54) centers or a 4-inch (101.60mm) strip with 53 contacts on .075 (1.91) centers. If more then one connector is required, the parts can be ordered in bulk and assembled as desired. Components and Accessories The CENTI-LOC strip connector can be ordered in kit or bulk form. The kit includes matin g insulators with a full compliment of contacts and two guide posts. If more than one connector is required, the parts can be ordered in bulk and assembled as desired. Kit Form Kits include mating insulators with full complement of contacts and two guide posts. Part Number CTA3-KIT CTA4-KIT CTA3-CTA4-KIT Insulator .475 (12.06) MAX. .275 (6.98) MAX. Contact Guide Posts Center spacing Polarizing Posts .075 (1.91) The guide posts and polarizing posts are inserted in the same manner as the contacts. The guide .100 (2.54) posts are inserted into the socket insulator and the polarizing posts are inserted into the pin .075 (1.91) & .100 (2.54) insulator. The corresponding contact in the mating insulator must be removed for each. See assembly instructions. Insulator Guide Post Polarizing Post Part Number CTA3-IP-53 CTA3-IS-53 CTA4-IP-60 CTA4-IS-60 CTA-GP CTA-PP Contact Center Spacing Type .075 (1.91) Pin .075 (1.91) Socket .100 (2.54) Pin .100 (2.54) Socket P/N 230-9507-000 P/N 230-9506-000 Material Nylon Nylon Nylon Nylon Passivated Stainless Steel Passivated Stainless Steel Dimensional Data .115 (2.92) MAX. 4.031 (102.39) MAX. 6.031 (153.19) MAX. .040 (1.02) MIN. .040 (1.02) MIN. .075 (1.91) TYP. .100 (2.54) TYP. .115 (2.92) MAX. CTA3-.075(1.91) Centers CTA4-.100(2.54) Centers Weights Part Number No. of Contacts CTA3 53 CTA4 60 Contacts Type Avy. Weight oz. 5% gm. pin .185 5.25 socket .203 5.75 pin .230 6.30 socket .241 6.90 Dimensions shown in inch (mm) Specifications and dimensions subject to change www.ittcannon.com 66 The Centi Line - .075" Contact Spacing 2D/CTA Contacts Contact Part Number Pin A resilient internal shoulder retains the contacts in the insulator housing. The front of the contact is chamfered to prevent damage to the internal shoulder as the contact is pushed into position. Part Number Socket Type 030-9542-001 Standard 30in. plating 031-9540-004 030-9542-002 50 in. plating 031-9540-005 030-9542-004 With inspection hole; 50 in. plating N/A 030-9542-011 P.C. tail .026 dia. x .083 lg. Soc. *031-9540-013 030-9542-012 P.C. tail .183 lg. Soc. .020 dia. x .183 lg. Pin 031-9540-016 030-9542-014 Long crimp barrel ** 031-9540-022 *** 030-9556-000 *** Small crimp bore For AWG #32 & 30 031-9540-007 030-9542-022 Small crimp bore For AWG #28 & 30 *031-9540-015 030-9542-015 P.C. tail .232 lg. Soc. .020 dia. x .255 lg. Pin *031-9540-019 030-9542-016 P.C. tail .444 lg. Soc. .018 dia. x .445 lg. Pin P.C. Tail Contacts _ .010 (.25) from pigtail Subtract .064 (1.63) + length when used in 2D pin insulator for potting well of connector assembly. _ .010 (.25) from pigtail Subtract .081 (2.08) + length when used in 2D socket insulator for potting well of connector assembly. Pin 031-9540-000 Socket 50 in. plating NOTE: Plating, except as noted, is 30 micro-inch gold. * Consult factory for any tail size or plating requirements. ** Special crimp locator required. Part number: 995-0001-714. (L3198-CL-PSL) *** Use special insertion tip (323-9510-016 &-017). 2D and Centi-Loc Crimp and Assembly Tools Tool Locators Pin Description Part Number M22520/2-01 995-0001-584 L3198-CLP 995-0001-338 Socket L3198-CLS 995-0001-353 M22520/2-01 Insertion Tools For Standard Contact AWG Size* CIET-CTA Handle Insertion Tips Kit Part Number (handle and tip) Tip Part Number** Handle Part Number** 22 CIT-PS-CTA-22 323-9510-001 204-9500-000 24 CIT-PS-CTA-24 323-9510-002 204-9500-000 26 CIT-PS-CTA-26 323-9510-003 204-9500-000 28 CIT-PS-CTA-28 323-9510-004 204-9500-000 30/P.C. Tail CIT-PS-CTA-30 323-9510-005 204-9500-000 * Based on wire size per MIL-W-16878 with Type E insulation, use smaller tool for wire with thin insulation, larger tool for wire having thick insulation. ** The 5 insertion tips (part numbers 323-9510-001 thru - 005). plus handle, and the pin and socket extaction tips maybe ordered as a SINGLE KIT by specifying the part number CIET-CTA-2. [Part number: 070143-0002]. Insertion Tools For Long Crimp barrel Contacts AWG Tip Part Number *** Size* Pin Contact CTA-AB Assembly Holding Block Part Number: 328-9508-000 Tip Part Number *** Socket Contact Handle Part Number*** 22 323-9510-008 323-9510-012 204-9500-000 24 323-9510-009 323-9510-013 204-9500-000 26 323-9510-010 323-9510-014 204-9500-000 *** To order the SINGLE KIT for the long crimp barrel contact (tip part numbers 323-9510-008 thru -014, handle and pin and socket extraction tips) please specify CIET-CTA-3. Extraction Tools Socket Extraction Tip Pin Extraction Tip Contact Description Kit Part Number (handle and tip) Tip Part Number Handle Part Number CENTIPIN CET-P-CTA-2 070112-0002 324-9502-000 204-9500-000 CENTISOCKET CET-S-CTA-1 070113-0001 324-9501-000 204-9500-000 Dimensions shown in inch (mm) Specifications and dimensions subject to change www.ittcannon.com 67 The Centi Line - .075" Contact Spacing 2D/CTA 2D/CTA CENTI-LOCTM Connectors Assembly Instructions The Double Density D/CTA CENTI-LOC Connectors are highly reliable and simple connectors to use. There are a few helpful suggestions that will assure complete satisfaction when followed: 1. The following instructions should be followed. 2. The proper crimp tool and locator (if required) must be used. These tools have been designed for use with this product. Substitutions of crimping equipment may result in connector failure at the assembly operation. 3. After crimping a contact to a lead it is of vital importance that the proper tool be used to assure seating the contact in the insulator in the proper position. Any substitution of insertion tools may result in over or under insertion of the contact which may damage the retention system of the insulator. 4. The female (socket) side of the connector has been designed with a controlled float to allow for ease of mating. To avoid reducing this float or causing a splaying of the contacts, any unnecessary strain caused by clamping the leads too close to the rear of the connector should be avoided. Use of recommended tooling together with proper assembly techniques will pay dividends in reliability and reduced costs. 2D Assembly Instructions CONTACT CRIMPING WIRE STRIPPING .100 (2.54) Cut the wires to length required and strip .100" of insulation from the end to be crimped. Check for cut or broken wires and frayed insulation. Using the proper crimp tool and locator, insert the contact into the locator. Insert the stripped end of the wire into the contact crimp pot, and crimp the contact to the wire. Squeeze the handles firmly to insure a proper crimp (tool will not release if crimping is incomplete). NOTE: Contact stop must be changed in tool locator when crimping pin and socket contacts. CONTACT INSERTION 1. Place the proper insertion tip in the insertion/-extraction handle and put the tip over the wire as shown. The tool tip will butt up against the crimp pot. Connector must be firmly supported during both insertion and extraction operations. 2. Using a firm, steady pressure, push the contact into the cavity until the resilient internal shoulder in the insulator snaps into the locking groove in the contact. The shoulder of the tool tip bottoms against the rear of the insulator, preventing over-insertion. Repeat for balance of contacts. CONTACT EXTRACTION 1. For contact extraction, remove the insertion tool tip and replace it with the proper extraction tool tip. (The socket tip will fit into the socket, and the pin tip will slide over the pin bundle). Insert the tool tip into the contact cavity: (the pin tip will butt up against the shoulder of the pin contact, and the socket tip will bottom out in the socket contact.) 2. Apply a firm, steady pressure until the contact is released from the internal shoulder in the insulator. The shoulder of the tool tip bottom against the insulator face to prevent damage to the internal shoulder. Remove the tool tip and pull the contact from the rear of the connector. Repeat for the balance of contacts to be removed. Dimensions shown in inch (mm) Specifications and dimensions subject to change www.ittcannon.com 68 The Centi Line - .075" Contact Spacing 2D/CTA CTA Assembly Instructions INSERTION 1. Place the connector into the slot in the assembly block with the arrows on the insulator pointing downward. The connector will bottom against the internal shoulder in the groove in the assembly block. Start contact insertion by placing the crimped contact in the cavity by hard. 2. Position the insertion tool tip on the rear of contact as shown. The insulation must be pulled back from the crimp pot approximately 1/32" to allow the tool tip to butt against the contact crimp pot. .275 (6.98) MAX. .475 (12.06) MAX. Guide Posts Polarizing Posts 3. With firm steady pressure, push the contact into the cavity until the resilient internal shoulder snaps into the locking groove in the contact. To prevent over insertion, the tool tip bottoms against the rear of the insulator. 4. The guide post and polarizing posts are inserted in teh same manner as the contacts. The guide posts are inserted into the socket insulator, and the polarizing posts are inserted into the pin insulartor. The corresponding contact in the mating insulator must be removed for each. EXTRACTION 1. To extract the contacts, place the conector face up in the assembly block so that the contact to be extracted is in the end of the block that has a fully slotted opening. 2. The pin extraction tool tip is tubular, slides over the pin bundle and butts against the front shoulder of the pin. The socket extraction tool is a solid rod that fits into the socket contact, the external shoulder butts against the contact socket shoulder. 3. Insert the extraction tool into the cavity and apply firm pressure until the contact is pushed thru the rear of the connector. 4. Lift the insulator from the groove and pull the contact out. Repeat for balance of contacts to be removed. Dimensions shown in inch (mm) Specifications and dimensions subject to change www.ittcannon.com 69 The NANO Line - .025" Contact Spacing NANO contacts incorporate the highly reliable Twist Pin concept, which allows continuity in very dense areas and under severe shock and vibration, requiring low engagement and separation forces. Termination can consist of uninsulated pigtails or insulated wire all pre-harnessed at our factory to your specifications. Due to various industry application requirements the NANO line is available in several different configurations, available in strip, metal shell and plastic, rectangular or circular configurations with center jackscrew. Successful applications for NANO connectors are many and varied, from the Air Force's AIRS program to actual human implantations in the medical research field. Specifications NTP NDM Single Row Strip Metal Shell Rectangular * Contact Rating - 1 amp max. * Minimum contact centers - 0.025 (0.64). Type * Wire sizes - #32 AWG stranded, #30 AWG solid. * Contact termination - integral pigtail or multiple indent crimp. Shell NJSC Alum. alloy 2024 T351 per QQ-A-250 or 6061-T6 per QQ-A-200 nickel plate * Contact rentention - fixed via epoxy. * Contact materials - socket: nickel silver. pin bundle: precious metal alloy or BeCu. pin Sleeve: nickel silver or cartridge brass. * Mating/unmating force - 6oz. per contact max. NJS Rectangular Circular Center Jackscrew Center Jackscrew Insulator Phenolic Phenolic Polyester Polyester No. of Contacts 1-40 Contacts 9, 15, 21, 25 31, 37 9, 24, 44 27, 72, 266 Pin Bundle Material - Precious metal per ASTM B477 and ASTM B541, or BeCu per CDA alloy 172 & 102 - Socket Sleeve Material Pin Sleeve Material - Nickel silver/ASTM B122, Comp. B- Nickel silver per ASTM B122, Comp. B or Cartridge Brass per CDA alloy 260 - Test Data The table below summarizes the results of key tests performed in accordance with MIL-STD-202, where applicable. Data is applicable to standard connec- tor with standard terminations. Variations may affect this data, so please consult the factory for further information on your requirements. Test Method Criteria of Acceptance Dielectric Withstanding Voltage Method 301: 350 VAC at sea level 100 VAC at 70,000' altitude No breakdown No breakdown Insulation Resistance Thermal Shock Method 302, Condition A Method 107, Condition B: -65C to +125C 5,000 megohms minium No physical damage Physical Shock Method 213, Condition I: 100 G's, 3-axes, 6 millisecond duration sawtooth pluse Method 204, Condition D: 15 G's, 10-2,000 Hz, 12 hours No physical damge No loss of continuity > 1 sec Durability 500 cycles of mating and unmating, 500 CPH max. No mechanical or electrical defect Moisture Resistance Method 106, omit 7b Insulation resistance > 100 megohms Salt Spray Method 101, Condition B: 48 hours Shall be capable of mating and unmating, and meet contact resistance requirements Contact Resistance Method 307: Vibration At 1 amp At 100 milliamps Contact Retention - No physical damge No loss of continuity > 1 sec } With gold plated BeCu Nanopin contact. 60 milliohms maximum With precious metal 80 milliohms maximum } alloy Nanopin contact. 3 lb. minimum axial load 30 milliohms maximum Dimensions shown in inch (mm) Specifications and dimensions subject to change www.ittcannon.com 70 Strip Connectors - .025" Contact Spacing NT How to Order - NT R NT P 2 40 S H *** RoHS COMPLIANCE SERIES INSULATOR MATERIAL CONTACT LOCATION CONTACT ARRANGEMENTS CONTACT TYPE TERMINATION TYPE MODIFICATION CODE SERIES Nano Strip TERMINATION MODIFICATION CONTACT ARRANGEMENTS 40 Maximum - .025 (0.64) centers 20 Maximum - .050 (1.27) centers INSULATOR MATERIAL P - Phenolic L - Solid uninsulated wire T - One piece contact/lead H - Insulated harness wire CONTACT TYPE P - Pin (Plug) S - Socket (Receptacle) CONTACT LOCATION 1 - Contacts on .025 (0.64) centers 2 - Contacts on .050 (1.27) centers MODIFICATION CODE For termination code, see NJS section, page 73. Dimensions NTP .055 (1.40) MAX. B .055 (1.40) MAX. B .025 (0.64) TYP. .025 (0.64) TYP. .025 (0.64) TYP. A .055 (1.40) MAX. B A A .160 (4.06) MAX. .220 (5.59) MAX. .080 (2.03) Plug - "H" and "L" Termination Types Plug - "T" Termination Types Receptacle - "H", "L", and "T" Termination Types B .010 (0.25) A Ref. B .010 (0.25) NTPI-21*-** .500 (12.70) .550 (13.97) NTPI-31*-** .750 (19.05) .800 (20.32) NTPI-22*-** .525 (13.34) .575 (14.61) NTPI-32*-** .775 (19.69) .825 (20.96) .350 (8.89) NTPI-23*-** .550 (13.97) .600 (15.24) NTPI-33*-** .800 (20.32) .850 (21.59) .325 (8.26) .375 (9.53) NTPI-24*-** .575 (14.61) .625 (15.88) NTPI-34*-** .825 (20.96) .875 (22.23) NTPI-15*-** .350 (8.89) .400 (10.16) NTPI-25*-** .600 (15.24) .650 (16.51) NTPI-35*-** .850 (21.59) .900 (22.86) .175 (4.45) NTPI-16*-** .375 (9.53) .425 (10.80) NTPI-26*-** .625 (15.88) .675 (17.15) NTPI-36*-** .875 (22.23) .925 (23.50) .150 (3.81) .200 (5.08) NTPI-17*-** .400 (10.16) .450 (11.43) NTPI-27*-** .650 (16.51) .700 (17.78) NTPI-37*-** .900 (22.86) .950 (24.13) NTPI-8*-** .175 (4.45) .225 (5.72) NTPI-18*-** .425 (10.80) .475 (12.07) NTPI-28*-** .675 (17.15) .725 (18.42) NTPI-38*-** .925 (23.50) .975 (24.77) NTPI-9*-** .200 (5.08) .250 (6.35) NTPI-19*-** .450 (11.43) .500 (12.70) NTPI-29*-** .700 (17.78) .750 (19.05) NTPI-39*-** .950 (24.13) 1.000 (25.40) NTPI-10*-** .225 (5.72) .275 (6.99) NTPI-20*-** .475 (12.07) .525 (13.34) NTPI-30*-** .725 (18.42) .775 (19.69) NTPI-40*-** .975 (24.77) 1.025 (26.04) B .010 (0.25) A Ref. B .010 (0.25) Part Number by Insulator Size NTPI-1*-** - .050 (1.27) NTPI-11*-** .250 (6.35) .300 (7.62) NTPI-2*-** .025 (0.64) .075 (1.91) NTPI-12*-** .275 (6.99) .325 (8.26) NTPI-3*-** .050 (1.27) .100 (2.54) NTPI-13*-** .300 (7.62) NTPI-4*-** .075 (1.91) .125 (3.18) NTPI-14*-** NTPI-5*-** .100 (2.54) .150 (3.81) NTPI-6*-** .125 (3.18) NTPI-7*-** Part Number by Insulator Size A Ref. Part Number by Insulator Size Dimensions shown in inch (mm) Specifications and dimensions subject to change www.ittcannon.com 71 Part Number by Insulator Size A Ref. NANO D Metal Shell - .025" Contact Spacing NDM How to Order - NDM R NDM- 9 P T ** RoHS COMPLIANCE SERIES CONTACT ARRANGEMENTS CONTACT TYPE TERMINATION TYPE MODIFICATION CODE SERIES TERMINATION TYPE H = Insulated harness wire L = Solid copper T = One piece contact/lead NDM - NANO D Metal Shell CONTACT ARRANGEMENTS 9, 15, 21, 25, 31, 37 MODIFICATION CODE To specifiy lead lengths, type and mechanical modifications consult customer service. CONTACT TYPE P = Pin (Plug) S = Socket (Receptacle) Dimensions NDM D .083 + _ .004 (2.11 + _ 0.10) DIA.TYP. C .025 (0.64) TYP. .150 (3.81) MAX. .130 A (3.30) MAX B _ .004 .004 + (1.12 + _ 0.10) .175 (4.44) MAX. Plug D _ .004 .083 + (2.11 + _ 0.10) DIA.TYP. C .025 (0.64) TYP. .150 (3.81) MAX. A .051 + _ .004 .205 (5.21) MAX. B (1.30 + _ 0.10) .155 (3.94) MAX. Receptacle Part Number By Shell Size Consult customer service for availability of other sizes. A Ref. Plug B Ref. Receptacle B Ref. C .005 (0.13) D Max. .725 (18.42) NDM-9P*/S* .200 (5.08) .317 (8.05) .380 (9.65) .565 (14.35) NDM-15P*/S* .350 (8.89) .467 (11.86) .530 (13.46) .715 (18.16) .875 (22.23) NDM-21P*/S* .500 (12.7) .617 (15.67) .680 (17.27) .865 (21.97) 1.025 (26.04) NDM-25P*/S8 .600 (15.24) .717 (18.21) .780 (19.81) .965 (24.51) 1.125 (28.58) NDM-31P*/S* .750 (19.05) .867 (22.02) .930 (23.62) 1.115 (28.32) 1.275 (32.39) NDM-37P*/S* .900 (22.86) 1.017 (25.83) 1.080 (27.43) 1.265 (32.13) 1.425 (36.20) Panel Mounting Dimensions Size A .005 (0.13) .086 .004 (2.18 0.10) .032 (0.81) R TYP. DIA. TYP C B A B + .005 (0.13) - .000 (0.00) C + .005 (0.13) - .000 (0.00) 9 .565 (14.35) .261 (6.63) .095 (2.41) 15 .715 (18.16) .411 (10.44) .095 (2.41) 21 .865 (21.97) .561 (14.25) .095 (2.41) 25 .965 (24.51) .661 (16.79) .095 (2.41) 31 1.115 (28.32) .811 (20.60) .095 (2.41) 37 1.265 (32.13) .961 (24.41) .095 (2.41) Dimensions shown in inch (mm) Specifications and dimensions subject to change www.ittcannon.com 72 Center Jackscrew - .030" Contact Spacing NJS How to Order - NJS R NJS - 24 P H *** RoHS COMPLIANCE SERIES CONTACT ARRANGEMENTS CONTACT TYPE TERMINATION TYPE TERMINATION CODE TERMINATION CODE* SERIES (H) 001 = 18" #32 AWG 7/40 strd. Type "ET" Teflon per MIL-W-16878/6, color yellow. (H) 003 = 18" #32 AWG 7/40 strd. Type "ET" Teflon per MIL-W-16878/6 color coded to MIL-STD-681, System 1. (L) 1 = 1/2" uninsulated solid #30 AWG gold plated copper. (L) 2 = 1" uninsulated solid #30 AWG gold plated copper (T)* = Consult customer service - Nano center jackscrew rectangular (9, 24, 44) NJSC - Nano center jackscrew circular (27, 72 266) NJS CONTACT ARRANGEMENTS 9, 24, 27, 44, 72, 266 CONTACT TYPE P = Pin (Plug) S = Socket (Receptacle) TERMINATION TYPE H = Insulated harness wire L = Solid uninsulated wire T = One piece contact/Lead * See Termination Codes shown below for additional length modification codes. Standard Wire Termination Codes The following termination codes are listed for your information. For additional codes please refer to Appendix on page 80 and 82. All wire lengths ae minimum. Solid Uninsulated Type (L) Harness Type (H) #32 AWG, 7/40 stranded, Type "ET" per MIL-W-16878/6 Length All Yellow #32 AWG gold plated copper. Color Coded Length All Yellow Color Coded Code Length Code Length 3 (76.2) H 020 H 027 24 (609.6) H 009 H 004 L61 .125 (3.18) L14 .750 (19.05) 6 (152.4) H 019 H 016 30 (762.0) H 010 H 005 L56 .150 (3.81) L2 1.000 (25.40) 8 (203.2) H 026 H 034 36 (914.4) H 011 H 006 L57 .190 (4.83) L7 1.500 (38.10) 10 (254.0) H 029 H 025 48 (1219.2) H 013 H 048 L39 .250 (6.35) L6 2.000 (50.80) 12 (304.8) H 028 H 002 72 (1828.8) H 017 H 046 L58 .375 (9.53) L16 2.500 (63.50) 18 (457.2) H 001 H 003 120 (3048.0) H 042 H 041 L1 .500 (12.70) L10 3.000 (76.20) 20 (508.0) H 038 H 023 Center Jackscrew/Rectangular NJS-9 & NJS-24 1 D 4 B 9 5 B 8 A 0-80 UNF-2B THREADED INSERT Face View Pin Insert C C Receptacle Side View Plug Side View NJS-9P* A Max. .255 (6.48) B Max. .165 (4.19) C .005 (0.13) .138 (3.51) D .005 (0.13) .116 (2.95) NJS-9S* .255 (6.48) .165 (4.19) .078 (1.98) .116 (2.95) NJS-24P* .435 (11.05) .165 (4.19) .138 (3.51) .116 (2.95) NJS-24S* .435 (11.05) .165 (4.19) .078 (1.98) .116 (2.95) Part Number NJSC-266 .165 (4.19) .116 (2.95) NJSC-72 .165 (4.19) .116 (2.95) NJSC-44 .165 (4.19) .116 (2.95) NJSC-27 .165 (4.19) .116 (2.95) Dimensions shown in inch (mm) Specifications and dimensions subject to change www.ittcannon.com 73 Center Jackscrew - .030" Contact Spacing NJS Contacts .060 (1.52) MAX. EPOXY WICKING SOCKET CONTACT .062 (1.57) REF. 0.90 .010 (2.29 0.25) .011 (.28) REF. .011 (.28) REF. PIN CONTACT WITH THRU-BUNDLE PIGTAIL GUIDE POST (OPTIONAL WITH LOSS OF CONTACT .100 (2.54) MAX EPOXY WICKING EPOXY RETAINING CONTACT INSULATOR Socket View Pin View (Thru-Bundle Contact) Pin View (Crimp-Type Contact) NOTE: Guide posts can be installed in any contaact cavity for polarization purposes. Connector Saver NJS-9P & S .128 (3.25) REF. #0-80 UNF-2A GUIDE POST CAVITY (open) .062 (1.57) REF. Part Number: NJS97294-835 Dimensions shown in inch (mm) Specifications and dimensions subject to change www.ittcannon.com 74 . Custom Cable Assemblies Our product portfolio has been developed and is continuing to be developed to provide our customers with new and better technologies that offer superior system level performance while lowering overall system level costs. Our corporate culture in Six Sigma Methodologies allows ITT to continuously challenge our Engineering and Scientific professionals to develop new processes and technologies in Material Science, Automation, and Testing to ensure that our customers get the best cost effective harsh environment cable assemblies from ITT. You should expect no less from an Industry leader. Dynamic Custom Cable Assemblies for Harsh Environments ITT has been a world leader in designing and manufacturing harsh environment micro interconnects and cable assemblies for over fifty years. In addition, our historical product and assembly expertise dates back over 85 years to the founding of the original ITT Cannon. Today, we provide complete turnkey cable assemblies for all of ITT's micro connector portfolio including: Cent Line Interconnects, MDM series, M83513 Series, MEB series, MDM Mixed Signal Packages, MT strip interconnects, micro miniature circular MIK series, and our high density Nano Connectors. Our cable assembly expertise has allowed ITT to develop innovative Six Sigma driven manufacturing processes that allows our customers a full breadth of tight pitch cable assemblies in 0.100, 0.075, 0.050, and 0.025 contact spacing. ITT's harsh environment interconnects and cable assemblies are used in the most demanding applications and environments. You will find our products in such markets as: Aerospace, Defense Electronics, Geophysical Exploration, High Speed Computer Networking, Industrial Automation, Medical Electronics, Satellite and Space Communications, and Telecommunications. Our complete interconnect solutions have flown on every major Aircraft and Space platform since the 1940's. In fact, many aircraft mechanics still refer to ITT Cannon connector and cable assemblies as the Aviation standard. The following paragraphs highlight several examples of interconnect cable assemblies for various Market segments that ITT services. These examples represent just a snapshot of the many custom micro interconnects or cable assemblies that ITT can provide the industry. Custom Micro D and M83513 Interconnect cable assemblies As one of the original developers of the Micro Interconnect technology, ITT has been an industry innovator in providing complete harsh environment cable assemblies and stretching the state of art in such areas as: Filtering, Hermetics, moisture barriers, High Speed and Mixed Signal Packages, EMI suppression, and multiple cable types. Most of ITT's custom cable assemblies utilize our standard Micro pin contact system. However, ITT does use other types of contact systems when manufacturing mixed signal interconnect systems where signal speed and power contacts will be incorporated into a complete cable assembly solution. Dimensions shown in inch (mm) Specifications and dimensions subject to change www.ittcannon.com 75 ITT manufactures complete cable assemblies worldwide at locations in Santa Ana California, Basingstoke UK, and Nogales Mexico. The various engineering and manufacturing centers of excellence are utilized to best fit various cable assembly and product platform specialties to provide our customers with the most cost effective solutions. Space Grade Micro Interconnect cable assemblies ITT has been deciding and manufacturing Space Rated interconnects and cable assemblies since the beginning of the US space Program in the mid 20th century. Prior to the MIL DTL M83513 specification ITT had been qualified for all NASA GSFC performance and specification requirements, on numerous satellite and space launch systems. ITT's Engineering and Product teams have over 200 years of combined experience in design, manufacture, and test of Space flight interconnects and cable assemblies. Our expertise in material science, manufacturing processes, out gassing, testing and screening, Magnetic permeability, and Cryogenics has given ITT a tremendous understanding in developing high reliability space system interconnects and cable assemblies . All of ITT's Space rated micro interconnect assemblies utilize ITT QPL M83513 connectors. These cable assemblies are tested to meet the most stringent performance requirements as outlined by numerous NASA GSFC specifications. Additional performance and test requirements beyond existing NASA GSFC guidelines can always be tailored so that additional custom test programs can be incorporated. Custom Cable Assemblies High Temperature Harsh Environment Interconnect Assemblies Medical Electronics Cable Assemblies: The proliferation of deep water drilling prospects in the world's oceans has created increased performance demands for micro miniature interconnects and cable assemblies for down hole oil field exploration. Not only are new fields being discovered in ocean depths greater than five miles but the wells themselves are being drilled deeper into the earths crust, sometimes to depths of 30,000 feet. Thus, the temperature extremes in excess of 200 degrees C are becoming the norm. In this the most demanding of environments, ITT has been designing and manufacturing such micro interconnect connector and cable assemblies for over forty years. Again our engineering and manufacturing expertise in the material science of Liquid Crystal Polymer (LCP), flourosilicones, plating, metals, and high temperature epoxies is leading ITT to develop high temperature performance beyond 200 degree C operating temperatures. As microminiaturization continues in the medical technologies field so the contributions of ITT's micro interconnect devices and assemblies. Our custom medical assemblies are utilized in such applications as: patient monitoring, diagnostics, imaging, and disposable systems. These types of application have been well served by ITT's Nano, MT strip and MIKQ series of interconnects. In addition to there specific connector types, ITT is well experienced in the careful selection of medical grade cables and termination materials to ensure fully compliant med. cal cable assemblies. Shown below is an example of ITT's MIKQ high strength plastic circular quick disconnect connector cable assembly for a medical application. Pictured below is an ITT high temperature nano interconnect assembly. ITT is developing new products around this nano interconnect platform that will not only increase signal density but will include new material's and processes for higher temperature applications. Dimensions shown in inch (mm) Specifications and dimensions subject to change www.ittcannon.com 76 Flex Circuit Cable Assembly Terminating to Flexible Circuits Diagram 1 shows details of the pad spacing and the suggested amount of material to be left between the end of the pad A and the edge of the flex B. 0,51 (.020) A B 2,16 (.085) 1,27 (.050) Ideally, for a low profile and a neat finish, it is best to terminate flexible circuits in line with the contacts. Since most Microminiature connectors have contacts set into two or three rows, termination is a simple process. The diagrams opposite are basically a design guide for pad arrangements, to suit MDM connectors in particular and to ensure the circuits enter the potting well. The length of the pad is optional but of course it is important to provide enough coverlay, especially at the edges of the circuit, to avoid de-lamination. We suggest at least 0,51 mm (.020 inches). Our standard potting shrouds provide support to the circuit with a dimension of 7,00 mm (.275 inches) from the rear of the flange. 0,51 (.020) COVERLAY EXTENDS INTO POTTING Diagram 2 illustrates how the connector is prepared with short pigtails and a special first pot which just captures the contacts. The final back potting for strength is controlled by our standard 7,00 (.275) potting fixtures. 6,99 (.275) 4,98 (.196) 2,00 (.079)/1,53 (060) FIRST POTTING LEVEL TO RETAIN CONTACTS Please consult Customer Service for specific flex circuit assembly design considerations and requirements. Dimensions shown in inch (mm) Specifications and dimensions subject to change www.ittcannon.com 77 Custom Back Shells Custom Back Shell Systems different material finishes and sizes and can be provided with special process termination methods. In addition, ITT has developed a method of riveting the back fitting to the shell within the jacking area. This option guarantees 360 degree shielding effectiveness even when jackscrews or jacking posts are not being used. ITT has designed numerous back shell solutions for micro miniature interconnects for many harsh environment applications. Although ITT does not offer a standard back shell portfolio today, we can design and manufacture a range of back fittings for our MDM connector products depending on the customer requirements. Utilizing one of our partnership relationships, one of our UK based micro product groups of ITT can provide can provide custom designs utilizing proven banded systems in which the braid is captivated over a chimney style outlet. These types of back shell systems are available in In addition to the above ITT can provide special back potting style termination systems for environmental protection and strain relief. These types of a back shell style system are typically filled with epoxy or other encapsulating materials to provide a robust and effective back shell system. Where a conduit system is preferred such as for test box environments in field locations, back fittings and a fully screened weatherproof convoluted trunking can be provided Sealing Gaskets We have received requests for gasket materials to seal the MDM connectors into various enclosures. We recommend that you consider wider flanged connectors together with a low cost conductive gasket to provide an adequate surface area. This combination will give you IP-66 sealing with good EMC compliance. The following dimensions for gaskets and flange dimensions are regarded as the minimum that you should consider. Conductive elastomers generally offer a superior shielding performance when compared with alternatives as in table below. Gasket Type Neoprene (wire impregnated) Silicone (wire impregnated) Silicone (oriented wire) Neoprene (fabric wrap) Metallic finger stock Metallic fibres Conductive silicone rubber Shielding performance S S G G G G G Temperature range S G G S G G G IP sealing P P S S P P G Compression force G G G G G S S Compression range S S S G G P S Surface texture P P G P G P S Compression set S S S S G P G Re-usability S S S S G P G * Neoprene is a trademark of Dupont P = Poor S = Satisfactory G = Good Conductive rubber gaskets can be loaded with many different metallic fillers but the choice of material is dependent upon a number of factors such as level of conductivity, shielding effectiveness, galvanic compatibility and cost. Galvanic Corrosion can occur when two dissimilar metals are in contact with one another in the presence of an electrolyte. The type of gasket material has to be assessed because of the use of metallic fillers. Many applications are dry indoor environments where corrosion is not a major concern. However, for external use, particularly marine, it is recommended that consideration be given to compatibility. The table on the next page is a summary. Enclosure Material Silver/Nickel Silver/Copper Silver/aluminum Inert aluminum Silver/Glass Silver Nickel/Graphite Nickel aluminum alloys X X l X X l l Magnesium alloys X X l l X X l l Stainless steel Copper alloys Cadmium plating X X l l X X l l Tin plating l X l l l Nickel plating l l Chromium plating Silver plating Zinc & galvanise plating X X l l X X l l Titanium = good l = Satisfactory X = Not recommended Dimensions shown in inch (mm) Specifications and dimensions subject to change www.ittcannon.com 78 Appendix "L" Code Chart SORTED BY LENGTH SORTED BY CODE Wire Length, IN. Decimal 0.080 0.094 0.110 0.125 0.140 0.150 0.171 0.187 0.190 0.210 0.250 0.312 0.375 0.380 0.500 0.625 0.750 1.000 1.500 2.000 2.250 2.500 3.000 3.500 4.000 4.500 5.000 6.000 7.000 8.000 9.000 10.000 11.500 12.000 15.000 18.000 20.000 Fraction 3/32 1/8 3/16 1/4 3/8 3/8 1/2 5/8 3/4 Wire Length, IN. Code Code Decimal L63 L62 L65 L61 L67 L56 L66 L17 L57 L59 L39 L60 L58 L64 L1 L12 L4 L2 L7 L6 L25 L16 L10 L15 L11 L28 L9 L3 L8 L18 L45 L13 L52 L4 L46 L55 L5 L1 L2 L3 L4 L5 L6 L7 L8 L9 L10 L11 L12 L13 L14 L15 L16 L17 L18 L25 L28 L39 L45 L46 L52 L55 L56 L57 L58 L59 L60 L61 L62 L63 L64 L65 L66 L67 0.500 1.000 6.000 12.000 20.000 2.000 1.500 7.000 5.000 3.000 4.000 0.625 10.000 0.750 3.500 2.500 0.187 8.000 2.250 4.500 0.250 9.000 15.000 11.500 18.000 0.150 0.190 0.375 0.210 0.312 .0125 0.094 0.080 0.380 0.110 0.171 0.140 #25AWG, SOLID COPPER WIRE PER QQ-W-343, TYPE "S", GOLD PLATED PER MIL-G-45204, TYPE II GRADE C OR D, CLASS 1 (50 MICROINCHES MINIMUM) Nano "L" Code Charts on page 80. Dimensions shown in inch (mm) Specifications and dimensions subject to change www.ittcannon.com 79 Fraction 1/2 5/8 3/4 3/16 1/4 3/8 5/16 1/8 3/32 Appendix "L" Code Chart (for Nano products only) SORTED BY LENGTH SORTED BY CODE Wire Length, IN. Decimal 0.080 0.094 0.110 0.125 0.140 0.150 0.171 0.187 0.190 0.210 0.250 0.312 0.375 0.380 0.500 0.625 0.750 1.000 1.500 2.000 2.250 2.500 3.000 3.500 4.000 4.500 5.000 6.000 7.000 8.000 9.000 10.000 11.500 12.000 15.000 18.000 20.000 Fraction 3/32 1/8 3/16 1/4 3/8 3/8 1/2 5/8 3/4 Wire Length, IN. Code Code L63 L62 L65 L61 L67 L56 L66 L17 L57 L59 L39 L60 L58 L64 L1 L12 L4 L2 L7 L6 L25 L16 L10 L15 L11 L28 L9 L3 L8 L18 L45 L13 L52 L4 L46 L55 L5 L1 L2 L3 L4 L5 L6 L7 L8 L9 L10 L11 L12 L13 L14 L15 L16 L17 L18 L25 L28 L39 L45 L46 L52 L55 L56 L57 L58 L59 L60 L61 L62 L63 L64 L65 L66 L67 Decimal 0.500 1.000 6.000 12.000 20.000 2.000 1.500 7.000 5.000 3.000 4.000 0.625 10.000 0.750 3.500 2.500 0.187 8.000 2.250 4.500 0.250 9.000 15.000 11.500 18.000 0.150 0.190 0.375 0.210 0.312 .0125 0.094 0.080 0.380 0.110 0.171 0.140 Fraction 1/2 5/8 3/4 3/16 1/4 3/8 5/16 1/8 3/32 #30AWG, SOLID COPPER WIRE PER QQ-W-343, TYPE "S", GOLD PLATED PER MIL-G-45204, TYPE II GRADE C OR D, CLASS 1 (50 MICROINCHES MINIMUM) Dimensions shown in inch (mm) Specifications and dimensions subject to change www.ittcannon.com 80 Appendix "H" Code Charts 16878/4 22759/11-26 22759/33-26 Wire, Electrical, Polyetrafluorethylene (PTFE) Insulated, 200 Degrees C, 600 Volts, Extruded Insulation Wire, Electrical, Fluoropolymer-Insulated, Extruded TFE, Silver-Coated Copper Conductor, 600 Volt Wire, Electrical, Fluoropolymer-Insulated, Crosslinked Modified, ETFE, Lightweight, Silver-Coated, HighStrength Copper Alloy 200 Degrees C, 600 Volt Length 1 2 3 4 5 6 8 9 10 12 16 17 18 20 21 24 30 35 36 40 42 48 50 60 72 80 92 96 120 180 Yellow White 030 024 020 - 031 019 026 015 029 028 039 036 001 038 055 009 010 018 011 037 012 013 040 014 017 032 022 035 042 043 C30 C24 C20 C33 C31 047 C26 C15 C29 008 C39 C36 044 C38 C55 045 C10 C18 058 C37 021 C13 C40 C14 059 C32 C22 C35 C42 C43 System 1 A30 A24 027 033 A31 016 034 A15 025 002 A39 A36 003 023 A55 004 005 A18 006 A37 A12 048 A40 056 046 A32 A22 A35 041 A43 Length 1 2 3 4 5 6 8 9 10 12 16 17 18 20 21 24 30 35 36 40 42 48 50 60 72 80 92 96 120 180 White 10 Color Repeat G30 G24 G20 G33 G31 065 G26 G15 G29 066 G39 G36 067 G38 G55 068 G10 G18 069 G37 G12 070 G40 G14 071 G32 G22 G35 G42 G43 Y30 Y24 Y20 Y33 Y31 Y19 Y26 Y15 Y29 Y28 Y39 Y36 Y01 Y38 Y55 Y09 Y10 Y18 Y11 Y37 Y12 Y13 Y40 Y14 Y17 Y32 Y22 Y35 Y42 Y43 Nano "H" Code Charts on page 82. Dimensions shown in inch (mm) Specifications and dimensions subject to change www.ittcannon.com 81 System 1 H30 H24 H20 H33 H31 072 H26 H15 H29 073 H39 H36 074 H38 H55 075 H10 H18 076 H37 H12 077 H40 H14 078 H32 H22 H35 H42 H43 Length 1 2 3 4 5 6 8 9 10 12 16 17 18 20 21 24 30 35 36 40 42 48 50 60 72 80 92 96 120 180 White 10 Color Repeat V30 V24 V20 V33 V31 V19 V26 V15 V29 V28 V39 V36 V01 V38 V55 V09 V10 V18 V11 V37 V12 V13 V40 V14 V17 V32 V22 V35 V42 V43 W30 W24 W20 W33 W31 W19 W26 W15 W29 W28 W39 W36 W01 W38 W55 W09 W10 W18 W11 W37 W12 W13 W40 W14 W17 W32 W22 W35 W42 W43 System 1 X30 X24 X20 X33 X31 X19 X26 X15 X29 X28 X39 X36 X01 X38 X55 X09 X10 X18 X11 X37 X12 X13 X40 X14 X17 X32 X22 X35 X42 X43 Appendix "H" Code Charts (for Nano products only) MIL-W-16878/6 Wire, Electrical, Polyetrafluorethylene (PTFE) Insulated, 200 Degrees C, 250 Volts, Extruded Insulation Length 1 2 3 4 5 6 8 9 10 12 16 17 18 20 21 24 30 35 36 40 42 48 50 60 72 80 92 96 120 180 Yellow White 030 024 020 - 031 019 026 015 029 028 039 036 001 038 055 009 010 018 011 037 012 013 040 014 017 032 022 035 042 043 C30 C24 C20 C33 C31 047 C26 C15 C29 008 C39 C36 044 C38 C55 045 C10 C18 058 C37 021 C13 C40 C14 059 C32 C22 C35 C42 C43 System 1 A30 A24 027 033 A31 016 034 A15 025 002 A39 A36 003 023 A55 004 005 A18 006 A37 A12 048 A40 056 046 A32 A22 A35 041 A43 www.ittcannon.com 82 Appendix MIL-STD-681 Wire Color Code Reference Data PIN No. 1* 2* 3* 4* 5* 6* 7* 8* 9* 10* 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 MIL-STD-681 Base No. Color 0 BLK 1 BRN 2 RED 3 ORN 4 YEL 5 GRN 6 BLU 7 VIO 8 GRY 9 WHT 90 WHT 91 WHT 92 WHT 93 WHT 94 WHT 95 WHT 96 WHT 97 WHT 98 WHT 901 WHT 902 WHT 903 WHT 904 WHT 905 WHT 906 WHT 907 WHT 908 WHT 912 WHT 913 WHT 914 WHT 915 WHT 916 WHT 917 WHT 918 WHT 923 WHT 924 WHT 925 WHT 926 WHT 927 WHT 928 WHT 934 WHT 935 WHT 936 WHT 937 WHT 938 WHT 945 WHT 946 WHT 947 WHT 948 WHT 956 WHT First Stripe BLK BRN RED ORN YEL GRN BLU VIO GRY BLK BLK BLK BLK BLK BLK BLK BLK BRN BRN BRN BRN BRN BRN BRN RED RED RED RED RED RED ORN ORN ORN ORN ORN YEL YEL YEL YEL GRN Second Stripe Third Stripe BRN RED ORN YEL GRN BLU VIO GRY RED ORN YEL GRN BLU VIO GRY ORN YEL GRN BLU VIO GRY YEL GRN BLU VIO GRY GRN BLU VIO GRY BLU * 10 colors repeat is the standard wire color code for 83513-Style connectors. www.ittcannon.com 83 PIN No. 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 MIL-STD-681 No. 957 958 967 968 978 9012 9013 9014 9015 9016 9017 9018 9023 9024 9025 9026 9027 9028 9034 9035 9036 9037 9038 9045 9046 9047 9048 9056 9057 9058 9067 9068 9078 9123 9124 9125 9126 9127 9128 9134 9135 9136 9137 9138 9145 9146 9147 9148 9156 9157 Base Color WHT WHT WHT WHT WHT WHT WHT WHT WHT WHT WHT WHT WHT WHT WHT WHT WHT WHT WHT WHT WHT WHT WHT WHT WHT WHT WHT WHT WHT WHT WHT WHT WHT WHT WHT WHT WHT WHT WHT WHT WHT WHT WHT WHT WHT WHT WHT WHT WHT WHT First Stripe GRN GRN BLU BLU VIO BLK BLK BLK BLK BLK BLK BLK BLK BLK BLK BLK BLK BLK BLK BLK BLK BLK BLK BLK BLK BLK BLK BLK BLK BLK BLK BLK BLK BRN BRN BRN BRN BRN BRN BRN BRN BRN BRN BRN BRN BRN BRN BRN BRN BRN Second Stripe VIO GRY VIO GRY GRY BRN BRN BRN BRN BRN BRN BRN RED RED RED RED RED RED ORN ORN ORN ORN ORN YEL YEL YEL YEL GRN GRN GRN BLU BLU VIO RED RED RED RED RED RED ORN ORN ORN ORN ORN YEL YEL YEL YEL GRN GRN Third Stripe RED ORN YEL GRN BLU VIO GRY ORN YEL GRN BLU VIO GRY YEL GRN BLU VIO GRY GRN BLU VIO GRY BLU VIO GRY VIO GRY GRY ORN YEL GRN BLU VIO GRY YEL GRN BLU VIO GRY GRN BLU VIO GRY BLU VIO Terminology Adhesive dispensing: a computer-controlled machine automatically dispenses epoxy adhesive. Backmolding: this term refers to the process of transfer-molding epoxy performs into a old. The epoxy is heated and pressurized, much like conventional plastic molding. Backpotting: the application of epoxy to connector wire terminations for strain relief and sealing. Epoxy is dispensed with pneumatic syringes. Standard Micro products have built-in potting wells to contain the epoxy, but optional potting in custom configurations is accomplished with inexpensive molds. Brady labels: wraparound adhesive labels for multi-conductor cable. Breakout: the area where one or more cables are joined together. A breakout frequently requires splices and extra strain relief such as cable ties or tubing. Electrical testing: Hi-pot, insulation resistance, and continuity testing are standard tests for cable assemblies. Etching: etching is a chemical process to prepare certain types of Teflon insulated wire for potting. Without etching, the epoxy will not bond properly. Expando: braided sleeving used to protect a wire bundle. The simplest and least expensive method of jacketing a cable, expando tubing is made of abrasion-resistant nylon or other materials. The ends of the tubing are usually encapsulated in epoxy. Header: a general term for any printed circuit board mounted connector used as an I/O port. Hot stamping: insulated wire is imprinted with identification numbers or text. Hot-stamped heat shrink tubing: used for multi-conductor cables, heat shrink tubing is impression stamped, then installed on the cable and shrunk. Ink-jet marking: dots of ink are sprayed through a stationary nozzle onto a part moving on a conveyer. Ink jet marking is now standard. Ink-stamping: the traditional method of placing metal type in a marking machine which is inked with a roller. The metal type transfers the ink to a rubber pad, and the part is pressed onto the pad. Oven curing is required. Jumper Cable: this term usually applies to a short cable assembly that plugs into a printed circuit board one one end, with the other end mounted in an I/O panel. Lacing: the process of tying individual wires together into bundles. Special lacing tape is used. Laser stripping: insulation is removed from the wire by using a special laser stripping machine. Typically used on flat cable. Mass-termination: simultaneous termination of multiple contacts. Normally associated with IDC termination, mass termination is also used on micropins in a special multi-contact crimp tool. Pigtail: a single-ended cable assembly having one connector on one end and unterminated wire on the other end. Potting: the application of various adhesives to a connector. Potting encapsulates the wires or terminals, providing environmental sealing and strain relief. Silkscreening: Ink is transferred through a screen. Stripping: insulation is removed from wire ends on automatic cut and strip equipment. Thermal Shock: a conditioning environmental test that cycles a part repeatedly through a specified temperature range. Thermal shock is frequently performed prior to pressure testing. Tinning: the application of molten solder to connector terminals. Micro products are tinned on a fully automatic machine with cleaning, preheating and inert gas tinning. Pre-tinned leads ensure excellent solderabillity. Wire marking: individual numbered adhesive tags are attached to each wire. Wire striping: insulated wire from #24 thru #28 AWG is striped with colors for circuit identification. Wiring fixtures: flat wiring boards or more complicated three-dimensional fixtures are required for many multi-branched cable harnesses. Mating connectors are fixtured in the exact position of the end use equipment, and the cable assembly is built on the fixture. Dimensions shown in inch (mm) Specifications and dimensions subject to change www.ittcannon.com 84 Product Safety Information THIS NOTE MUST BE READ IN CONJUNCTION WITH THE PRODUCT DATA SHEET/CATALOG. FAILURE TO OBSERVE THE ADVICE IN THIS INFORMATION SHEET AND THE OPERATING CONDITIONS SPECIFIED IN THE PRODUCT DATA SHEET/ CATALOG COULD RESULT IN HAZARDOUS SITUATIONS. 1. MATERIAL CONTENT AND PHYSICAL FORM Electrical connectors do not usually contain hazardous materials. They contain conducting and non-conducting materials and can be divided into two groups. a) Printed circuit types and low cost audio types which employ all plastic insulators and casings. b) Rugged, Fire Barrier and High Reliability types with metal casings and either natural rubber, synthetic rubber, plastic or glass insulating materials. Contact materials vary with type of connector and also application and are usually manufactured from either: Copper, copper alloys, nickel, alumel, chromel or steel. In special applications, other alloys may be specified. 2. FIRE CHARACTERISTICS AND ELECTRIC SHOCK HAZARD There is no fire hazard when the connector is correctly wired and used within the specified parameters. Incorrect wiring or assembly of the connector or careless use of metal tools or conductive fluids, or transit damage to any of the component parts may cause electric shock or burns. Live circuits must not be broken by separating mated connectors as this may cause arcing, ionization and burning. Heat dissipation is greater at maximum resistance in a circuit. Hot spots may occur when resistance is raised locally by damage, e.g. cracked or deformed contacts, broken strands of wire. Local overheating may also result from the use of the incorrect application tools or from poor quality soldering or slack screw terminals. Overheating may occur if the ratings in the product Data Sheet/Catalog are exceeded and can cause breakdown of insulation and hence electric shock. If heating is allowed to continue it intensifies by further increasing the local resistance through loss of temper of spring contacts, formation of oxide film on contacts and wires and leakage currents through carbonization of insulation and tracking paths. Fire can then result in the presence of combustible materials and this may release noxious fumes. Overheating may not be visually apparent. Burns may result from touching overheated components. 3. HANDLING Care must be taken to avoid damage to any component parts of electrical connectors during installation and use. Although there are normally no sharp edges, care must be taken when handling certain components to avoid injury to fingers. Electrical connectors may be damaged in transit to the customers, and damage may result in creation of hazards. Products should therefore be examined prior to installation/use and rejected if found to be damaged. 4. DISPOSAL Incineration of certain materials may release noxious or even toxic fumes. 5. APPLICATION Connectors with exposed contacts should not be selected for use on the current supply side of an electrical circuit, because an electric shock could result from touching exposed contacts on an unmated connector. Voltages in excess of 30 V ac or 42.5 V dc are potentially hazardous and care should be taken to ensure that such voltages cannot be transmitted in any way to exposed metal parts of the connector body. The connector and wiring should be checked, before making live, to have no damage to metal parts or insulators, no solder blobs, loose strands, conducting lubricants, swarf, or any other undesired conducting particles. Circuit resistance and continuity check should be made to make certain that there are no high resistance joints or spurious conducting paths. Always use the correct application tools as specified in the Data Sheet/Catalog. Do not permit untrained personnel to wire, assemble or tamper with connectors. For operation voltage please see appropriate national regulations. IMPORTANT GENERAL INFORMATION (i) Air and creepage paths/Operating voltage. The admissible operating voltages depend on the individual applications and the valid national and other applicable safety regulations. For this reason the air and creepage path data are only reference values. Observe reduction of air and creepage paths due to PC board and/or harnessing. (ii) Temperature All information given are temperature limits. The operation temperature depends on the individual application. Dimensions shown in inch (mm) Specifications and dimensions subject to change www.ittcannon.com 85 (iii) Other important information Cannon continuously endeavors to improve their products. Therefore, Cannon products may deviate from the description, technical data and shape as shown in this catalog and data sheets. "Engineered for life" is a registered trademark of ITT Inc. (c)2017. All other trademarks or registered trademarks are property of their respective owners. All data subject to change without notice. Circular/Filter/Hermetic Connectors As a world leader in circular, filter, and hermetic connectors, ITT can leverage its design and manufacturing expertise to fit virtually any application. Our expertise includes fast positive mating for a wide range of military applications, as well as numerous sizes and contact configurations for various harsh environments. D-Subminiature Connectors Cannon invented D-sub connectors in 1952. Our family of D-Subs now includes combinations of signal, power and RF, as well as severe service sealed connectors. Cannon D-Subs are available with an extensive line of backshells and accessories and are one of the most economical shielded connector solutions available. Fiber Optic Connectors and Cable Assemblies Cannon fiber optic solutions provide an excellent performance/ cost value. Performance may be tailored to the end system, with our use of superior materials and bonding agents providing highly effective solutions. Our wide variety of products include fiber optic hybrid contacts, multi-channel, rack and panel and hirel assemblies. Microminiature Connectors Developed first by Cannon in the 1960s, Microminiature Connectors offer high performance and reliability with exceptional versatility. Available in rectangular, circular and strip-style configurations for countless applications, many of our highly engineered Microminiature connector products meet critical customer demands in multiple applications across the Aerospace & Defense industry. Rack and Panel Connectors Pioneered by Cannon during the 1930s, our Rack & Panel Connectors offer an unmatched variety of shell configurations and insert arrangements, as well as materials, plating and contact options. Today, we are recognized as an industry leader, offering an unparalleled range of off-the-shelf and custom Rack & Panel products to align with customer needs. RF Connectors ITT Cannon has been providing interconnect products to the Microwave and RF industry since 1963 (formerly The Sealectro Corporation). The RF 50 & 75 Ohm product lines cover UHF band through Ku band requirements. These connectors and cable assemblies are available with a thread type, snap type, bayonet type or slide on coupling method. The frequencies range from DC to 18+ GHz. ITT Cannon is a leading global manufacturer of connector products serving international customers in the aerospace and defense, medical, energy, transportation and industrial end markets. Whether delivering critical specs to aircraft pilots, streaming data through communications satellites or enabling ultrasound technology that gives an expectant mother the first glimpse of her unborn child, Cannon connects the world's most important information with the people who need it. To learn more, visit www.ittcannon.com Electronic Components Cannon Microminiature Connectors Customer Support Locations ASIA Tuopandun Industrial Area, Jinda Cheng, Xiner Village, Shajing Town, Baoan District, Shenzhen City, Guangdong, China 518125 Phone: 86.755.2726.7888 Fax: 86.755.2726.7515 GERMANY Cannonstrasse 1 Weinstadt, 71384 phone: 49.7151.699.0 fax: 49.7151.699.217 ITALY Corso Europa 41/43 Lainate (MI), Italy 20020 phone: 39.02938721 fax: 39.0293872300 UK Jays Close, Viables Estate Basingstoke, RG22 4BA phone: 44.1256.311200 fax: 44.1256.323356 USA 56 Technology Drive Irvine, CA 92618 phone: 1.800.854.3028 fax: 1.714.628.2142 (c)2017 ITT Inc. | ITT Cannon Microminiature Connectors Catalog | 20170724 www.ittcannon.com "Engineered for life" and "Cannon" are registered trademarks of ITT Inc. Specification and other data are based on information available at the time of printing, and are subject to change without notice. Our facility is not currently certified by the DLA and this product is not covered by the QPL/QML. Cannon Microminiature Connectors