Maximum Ratings & Thermal Characteristics Ratings at 25°C ambient temperature unless otherwise specified.
SYMBOLS B40 B80 B125 B250 B380 UNITS
Parameter
C1500G C1500G C1500G C1500G C1500G
Maximum repetitive peak reverse voltage VRRM 65 125 200 400 600 V
Maximum RMS input voltage R + C-load VRMS 40 80 125 250 380 V
Maximum DC blocking voltage VDC 65 125 200 400 600 V
Maximum peak working voltage VRWM 90 180 300 600 800 V
Maximum non-repetitive peak voltage VRSM 100 200 350 600 1000 V
Maximum repetitive peak forward surge current IFRM 10 A
Maximum average forward output current for
free air operation at TA=45°C R + L-load IF(AV) 1.6 A
C-Load 1.5
Peak forward surge current
single sine wave on rated load at TJ=125°C IFSM 50 A
Rating for fusing at TJ=125°C (t<100ms) I2t 12.5 A2sec
Minimum series resistor C-load at VRMS = ±10% Rt1.0 2.0 4.0 8.0 12 Ω
Maximum load capacitance +50%
-10% CL5000 2500 1000 500 200 µF
Typical thermal resistance per leg (NOTE 1) RΘJA 36
RΘJL 11 °C/W
Operating junction temperature range TJ-40 to +125 °C
Storage temperature range TSTG -40 to +150 °C
Electrical Characteristics Ratings at 25°C ambient temperature unless otherwise specified.
SYMBOLS B40 B80 B125 B250 B380 UNITS
C1500G C1500G C1500G C1500G C1500G
Maximum instantaneous forward voltage drop
per leg at 1.5A VF1.0 V
Maximum reverse current at rated repetitive
peak voltage per leg TA=25°C IR10 µA
Notes:
(1) Thermal resistance from junction to ambient and from junction to lead mounted on P.C.B.
at 0.375" (9.5mm) lead lengths with 0.2 x 0.2"
0.220 (5.6)
0.160 (4.1)
0.388 (9.86)
0.348 (8.84)
0.032 (0.81)
0.028 (0.71)
1.0
(25.4)
MIN.
0.060 (1.52)
0.020 (0.51)
0.348 (8.84)
0.308 (7.82)
0.220 (5.6)
0.180 (4.6)
0.220 (5.6)
0.180 (4.6)
Dimensions in inches
and (millimeters)
8/23/99
Features
• Plastic package has Underwriters Laboratory
Flammability Classification 94V-0
• Glass passivated chip junction
• High case dielectric strength
• Typical IRless than 0.1µA
• High surge current capability
• Ideal for printed circuit boards
• High temperature soldering guaranteed:
260°C/10 seconds, 0.375 (9.5mm) lead length,
5 lbs. (2.3kg) tension
Mechanical Data
Case: Molded plastic body over passivated junctions
Terminals: Plated leads solderable per MIL-STD-750,
Method 2026
Mounting Position: Any
Weight: 0.04 ounce, 1.1 grams
B40C1500G THRU B380C1500G
Glass Passivated Single-Phase
Bridge Rectifier
Reverse Voltage 65 and 600 V
Forward Current 1.5 A
Case Style WOG
020 40 60 80 100
0.01
0.1
1
10
0.1 110 100
1
10
100
24610 20 40 60 100
0
10
20
30
40
50
1
0.4 0.6 0.8 1.0 1.2 1.4
0.01
0.1
1
10
20
20 40 60 80 100 120 140
0
0.2
0.4
0.6
0.8
1.0
1.2
1.4
1.6
20 40 60 80 100 120 140
0
0.2
0.4
0.6
0.8
1.0
1.2
1.4
1.6
AMBIENT TEMPERATURE, °C
PEAK FORWARD SURGE CURRENT,
AMPERES
50 to 60 Hz
RESISTIVE OR INDUCTIVE LOAD
PERCENT OF RATED PEAK REVERSE
VOLTAGE, %
FIG.3 - MAXIMUM NON-REPETITIVE PEAK
FORWARD SURGE CURRENT PER LEG
INSTANTANEOUS FORWARD VOLTAGE, VOLTS
INSTANTANEOUS REVERSE CURRENT,
MICROAMPERES
TJ=25°C
PULSE WIDTH=300µs
1% DUTY CYCLE
FIG. 4 - TYPICAL FORWARD
CHARACTERISTICS PER LEG
INSTANTANEOUS FORWARD CURRENT,
AMPERES
FIG. 6 - TYPICAL JUNCTION CAPACITANCE
PER LEG
REVERSE VOLTAGE, VOLTS
TJ=25°C
f = 1.0 MHz
Vsig = 50mVp-p
TJ=25°C
CAPACITIVE
LOAD
< 500µF
500-5000µFCOPPER PADS
0.22 x 0.22”
(5.5 x 5.5mm)
BRIDGE OUTPUT
FULL WAVE RECTIFIED CURRENT
AVERAGE AMPERES
NUMBER OF CYCLES AT 60 Hz
TJ=100°C
JUNCTION CAPACITANCE, pF
FIG. 5 - TYPICAL REVERSE CHARACTERISTICS
PER LEG
TA= 25°C
SINGLE SINE-WAVE
(JEDEC Method)
AMBIENT TEMPERATURE, °C
BRIDGE OUTPUT FULL WAVE
RECTIFIED CURRENT AVERAGE
AMPERES
P.C.B.
0.375”
(9.5mm) COPPER PADS
0.22 x 0.22”
(5.5 x 5.5mm)
P.C.B.
0.375”
(9.5mm)
FIG.2 - DERATING CURVES
OUTPUT RECTIFIED CURRENT
FOR B250C1500G...B380C1500G
FIG.1 - DERATING CURVES
OUTPUT RECTIFIED CURRENT
FOR B40C1500G...B125C1500G
0-10µF
10-100µF
>100µF
CAPACITIVE
LOAD
50 to 60Hz
RESISTIVE OR
INDUCTIVE LOAD
B40C1500G THRU B380C1500G
Ratings and Characteristic Curves(TA= 25°C unless otherwise noted)
